FLASHING ROM
am in step 5 my phone is on tricolour mode and i c these
ONBL 1.17.0000
spl 1.10.olip
i have connected to the PC and i c USB in the bottom of the screen..!!
now its confirmed that my gene in a new one
now i go to orefkov folder and click on myyt1_42.exe and i get a window nw as u guys siad "click on "usb" and type in those codes... wer is that usb button??
should i jus click on ok? wen i click ok a note pad opens but i cannot type anything in that notepad..!!
reply asap plzz..!
GOT IT GUYS >>>> had the same prob wich they had with the previous topic sry fr this post ..!!
admins problem is solved......plz close this thread......
Related
Hi everyone.
im a beginner for PDA's..i have read your post about prophet then i decided to upgrade to WM6 PDAVIET.
While i connect pda and execute software i had mistake and turn off phone.i did turn on phone after cancelled process
it just showing operator logo and IPL SPL GSM OS infos..
and i have run again Upgrade_ROM.exe than its stopping " Clearing the existing Extension ROM " ..
What did i do PLS i wait your helps
goto bootloader and flash again
follow the direction on the link to enter bootloader mode
http://wiki.xda-developers.com/index.php?pagename=prophet_bootloader
and read the NEW WM6 upgrade guide. which is a sticky on top of the page.
Thank you..
i entered bootloader screen its showing operator logo and IPL SPL... vs
then i retry to run Upgrade_ROM.exe but there are no change ?
what must i see on bootloader screen ? and now my screen vibrating during on process now is it normal ?
PLS help ?
algorytma said:
Thank you..
i entered bootloader screen its showing operator logo and IPL SPL... vs
then i retry to run Upgrade_ROM.exe but there are no change ?
what must i see on bootloader screen ? and now my screen vibrating during on process now is it normal ?
PLS help ?
Click to expand...
Click to collapse
read my post @ my signature...... please reply to that thread if you think helpful~~~
algorytma said:
Thank you..
i entered bootloader screen its showing operator logo and IPL SPL... vs
then i retry to run Upgrade_ROM.exe but there are no change ?
what must i see on bootloader screen ? and now my screen vibrating during on process now is it normal ?
PLS help ?
Click to expand...
Click to collapse
That is not bootloader... It should show a three coloured screen, and when plugged in to USB, the text in the bottom right hand corner should say "USB"
i have alredy given 2 posts .but no response from any seniour member.
i have p3400 old.it was running good.i have hspl it with olipro.flashed it many times with custom roms.every hing was going well.last time i wrong hspl with oref.now on startup at boot mood it shows spl.1.017 oref.and i cant go further.i have almost tried all roms.win 5.0,win 6 and win6.5 but all ends with error 300[invalid update utility].i have done mtty.exe.it is done it shows spl1.017 oref.
plzzzzzz tell me what happened to my phone.is it bricked.or it is changed to p3400i.what i do now.
sunnymobile said:
i have alredy given 2 posts .but no response from any seniour member.
i have p3400 old.it was running good.i have hspl it with olipro.flashed it many times with custom roms.every hing was going well.last time i wrong hspl with oref.now on startup at boot mood it shows spl.1.017 oref.and i cant go further.i have almost tried all roms.win 5.0,win 6 and win6.5 but all ends with error 300[invalid update utility].i have done mtty.exe.it is done it shows spl1.017 oref.
plzzzzzz tell me what happened to my phone.is it bricked.or it is changed to p3400i.what i do now.
Click to expand...
Click to collapse
r u stupid ? who told you to install oref hspl
i request all members of xda forum to not reply this type of post some stupid ppl creating same type of post daily without searching
n y do u use HSPL everytime u flash
n y do u use HSPL everytime u flash
i think this problem can be sort out if we can create the bootloader image of an OLD gene then using it through MTTY with the old GENE SPL image
Anybody knows how to do this?
You can try this....
1. Stop ActiveSync
2. Open Task Manager (press Ctrl + Alt + Delete) on your PC and
stop these two processes rapimgr.exe and wcescomm.exe
3. Plug in your device via USB. Your computer should be asking install a driver. Install and continue.
4. Now Run mtty and choose USB in 'PORT'
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset.
5. type "task 8" to get your device formatted.
6. Now unplug your device and manually reset it.
just a suggestion, found this for some other device.
hope this will work with urs too
do it at ur own risk
hey sunit here is that nb fileView attachment 1.10-Olipro.zip
stupidgye said:
hey sunit here is that nb fileView attachment 192772
Click to expand...
Click to collapse
guess its time u changed ur id
Lol yeah, Vaibhav this id doesn't looks that cool yaar And thanks for the Olipro SPL. I will develop the unlocker setup tomorrow.
Its just a login name yaar. BTW can i change it without creating a new profile?
NAAM MEIN KYA RAKHA HAI BHAWNAO KO SAMJHO
LOL, i think yes, coz Hariharan changed his username from svr_hari to haree. Try asking an admin, or before that, Hari
Yes u can change ur id
hi
yes u can what i did is ask a Mod who has become my friend through this Forum
but pls note i had also asked the same friend to make ur SPL cheker a Sticky and the same was done so i don't think it would be right now to ask him again
but ultimately it was done by Flar who is the admin for this forum so i suggest that u send a PM to flar and give a few options for ur id and im sure if possible it will be done good
i too feel u need a Id change and may be u can change it to smartkid as that is wat i would call u
krazy_about_technology said:
LOL, i think yes, coz Hariharan changed his username from svr_hari to haree. Try asking an admin, or before that, Hari
Click to expand...
Click to collapse
I upgrade my rom and now he stucks on de first screen when windows mobile show i do everything i can and i don no what do more
The multi port program give-me this error
Cmd>ls boo.bin
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
Not allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Is everything i can do to my gene come back to life???????
Please Help me
Do you already do a SPL unlock?
If yes, just flash with another ROM.
Go to bootloader by press and hold camera then reset, release reset but still hold camera untill tri color appear, connect usb cable to pc then flash again with another ROM.
How thing i have all ready done that?but show-me how i do to see if i done well
When im restarting the pda the information tha show is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
After that screen goes to windows mobile screen and stuck
But is i do the combinations of the power button and camera i go to the 3 colors screen but when i do a update the program go to 2 % and reset
Please help-me
I think i all ready done that. But show-me how i do?
When i start the pda when arrive to the screen with the windows mobile picture stuck in there.
The information that i have in the begining is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
When i startup the device i can go to the 3 colors screen but when i tried to
upgrade the rom t when arrive at 2 % the device reset and give-me a error
i don now what i do more please help-me
@tonysucre do HSPL
hi
as per the nos u have posted u have not done HSPL
ur spl should end with .olip or .oref at the end instead of .0000
go to the tut given by Krazy and read many times use the tools and do the needful given in the same section viabhav has also given a tool
chek on both good luck
tonysucre said:
I think i all ready done that. But show-me how i do?
When i start the pda when arrive to the screen with the windows mobile picture stuck in there.
The information that i have in the begining is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
When i startup the device i can go to the 3 colors screen but when i tried to
upgrade the rom t when arrive at 2 % the device reset and give-me a error
i don now what i do more please help-me
Click to expand...
Click to collapse
haree said:
hi
as per the nos u have posted u have not done HSPL
ur spl should end with .olip or .oref at the end instead of .0000
go to the tut given by Krazy and read many times use the tools and do the needful given in the same section viabhav has also given a tool
chek on both good luck
Click to expand...
Click to collapse
Can you give-me the link of the tutorial?
Tks
@haree
buddy you are wasting your time .
There is a thread named upgrading ... by krazy as well as a thread by vaibhav named automatic SPL Updater. Just search a bit, son.
or may be you can take the cell to haree who will patch it for you
I Have already tried that but the thing but i cant put thing in the memory phone only in the sd card
Help please
after upgrade to 6.5 screen showing windows mobile 6.5 onyl
I used SumitsProUsersROM_WM6.5_build21815_OldGene_Fixed to upgrade its struck at windows mobile 6.5 screen only nothing happening.
not able to flash again. Aslo want to note that while I was ugrading it shows me something like "sudden loss of power"
Pls help my phone is not working now.
thaks
recharge the battery for mare than 1 hour and try again
After 6 hours of trying to change spl to flash the rom i haven´t manage to do anything more ist´s exactaly the same that i have all ready i have download a lot´s o rom´s and nothing i have tried the to do updating the spl by the sd card and nothing happen because i can´t put anything in the memory of the phone i only can put thing in the card from my computers card reader to trying to change the spl to 1.10-Olipro to flash the rom but i can´t
I don´t no what i have do more?
please anyone with the same problem can help-me
Tks
what error are u getting while upgrading?
vaibhav_batra_the_techguy said:
what error are u getting while upgrading?
Click to expand...
Click to collapse
error 270
is the same that a told is star to upgrading and in the 2 % the phone restarts and give-me that error i thing is because spl is 1.7.0000 or not?
I just see i hav cid lock and and dont now i unlock ?any help
@tonysucre
see
below link as i had told u before u have not done HSPL
u go to the below links and save them on ur comp and Read no one is going to hand hold u and u dont need it with such nice tutes given pls not im a guy with Zero tech skills and i did it so u can as my boss would say its not rocket science
& i dont have any gene tools with me as i have upgraded to another phone (see my sign)
good luck
http://forum.xda-developers.com/showthread.php?t=513329
http://forum.xda-developers.com/showthread.php?t=472169
tonysucre said:
Help please
Click to expand...
Click to collapse
When I attach my niki in bootloader mode with my pc and the i try to do hardspl there comes white screen showing a bar 0% but it did not go ahead like other htc it stays on and after some time there come an error 262 saying this
the rom update utility has encountered a communication error during the update process........etc
i also acted step b step on the guidence of this program but in vain so plez help me how can i hard spl my niki to upgrade new rom ......plzzzzzzzzz
Nofear99 said:
When I attach my niki in bootloader mode with my pc and the i try to do hardspl there comes white screen showing a bar 0% but it did not go ahead like other htc it stays on and after some time there come an error 262 saying this
the rom update utility has encountered a communication error during the update process........etc
i also acted step b step on the guidence of this program but in vain so plez help me how can i hard spl my niki to upgrade new rom ......plzzzzzzzzz
Click to expand...
Click to collapse
if u have already spl 1.5 on ur device then,after runing hard spl 1.22,the moment u c the tri colour on ur device,take the data cable off from pc.when u c 'serial' on ur device,insert the cable again.the process will be complete.
regards
thanks to answer but same problem...
deepankerjha said:
if u have already spl 1.5 on ur device then,after runing hard spl 1.22,the moment u c the tri colour on ur device,take the data cable off from pc.when u c 'serial' on ur device,insert the cable again.the process will be complete.
regards
Click to expand...
Click to collapse
i can see on boot loader mode my spl is 1.16.0000
niki200 cpld-4
plzz tell me another solution
i will be thankful to u
Nofear99 said:
i can see on boot loader mode my spl is 1.16.0000
niki200 cpld-4
plzz tell me another solution
i will be thankful to u
Click to expand...
Click to collapse
is ur device sim unlocked?moreover i think u have already hard spl installed on ur device pal.
Hi,
I tried patching my new gene P3400i direct using Orefkov's method i followed all the instructions supplied like first installing the driver if you are in Vista.. m in vista i did the same ... then switched off my cell removed SD card and sim then pressed camera button .. so on.. tricolor... USB written at bottom of the phone screen then where it was written open "mtty1_42.exe" and Press the button "USB" in the window that opened but i didnt get any window with USB written, attaching the screenshot of the window that pops up after running mtty1_42...
kindly help!!
check your PM.
done with bricking and reviving!! spl patched
thanx alot
Hi Suraj,
did u get a solution for the problem..m too facing the same
rahulbitly1 said:
Hi Suraj,
did u get a solution for the problem..m too facing the same
Click to expand...
Click to collapse
more better you look and follow guide have given by krazy_about_technology ~ http://forum.xda-developers.com/showpost.php?p=3181506&postcount=3
hi rahul go with the steps in tutorial...
first you've to brick your device with olipro then bring it back using orefkov
The device is bricked and i am unable to recover it using the steps mentioned in the guide. It shows the following information on tricolor screen:
ONBL 1.17.0000
SPL 1.10 Olip
Whwn i run MTTY no usb button appears. M using xp for patching the spl.