Hello everyone
I flashed a rom on my Smartflip, after having unlocked the cid.
Everything worked well, but the first reboot has been fixed on the screen Win Mobile 6.1 and after a SR, not open more windows mobile screen. If I press the power button nothing happens, black screen. I put it in bootloader leaves the writing USB but the PC does not detect it, help please.
Sorry for my English, I'm Italian.
Francesco
check my post.... it's called gold card method, don't be afraid, i had the same problem many years ago and i could resolve it... good luck!!!
U have to boot in tri color mode and flash another rom. Search in the forum. (Is similar to "press the volume up button and the opposite button and power on the phone..) but i can't remember the exact sequence. Search in this forum good luck
Hi,
What is the most recent/best ROM that you use?
Thanks,
Related
Hi all,
I hope anyone can help me on this. I downloaded the
new firmware from the UK T-Mobile site for a SDA-II phone and
installed it. During the install my wonderful XP system stopped
showing off a BSOD... (blue screen of death)
So the upload to the phone was interrupted. If I try now to switch on the phone nothing happens.
Problem is I also used the sw to remove the simlock already, so I suppose I cannot go back to t-mobile for a repair.
Is there any way to get the firmware back into the phone correctly ?
I know there should be a way using an In System Programmer, ISP
Has anyone experience with this problem ?
this has been experienced many times, with many posts on it.
Try getting the device into bootloader mode (not sure of the key combination for the hurricane) and you should be able to reflash it through windows.
I have the same problem and don't know how to backup my previous ROM, did any one experience about that, please tell us.
Th eeasiest method is:
- Disable the USB-Connection in the settings of desktop AS
- press and hold the camera-button
- connect the SDA II with the USB-cable
- after a view seconds appears a three-coloured display, you're now in the bootloader
- you can now stopp pressing the camera-button 8)
If you cann access the bootloader, your phone isn't allready death! You can flash an image from the MiniSD!
Hi All,
I have an SDA II which suffered a failed ROM update as described above. Unfortunately I am unable to get the bootloader screen to display using the technique described above.
Has anybody got advice as to where I can get the phones software reloaded and everything back up and running again.
PS I have made extensive unsuccessful use of the search feature before posting.
Any help very much appreciated.
BR
Andy
how
animelover said:
Th eeasiest method is:
- Disable the USB-Connection in the settings of desktop AS
- press and hold the camera-button
- connect the SDA II with the USB-cable
- after a view seconds appears a three-coloured display, you're now in the bootloader
- you can now stopp pressing the camera-button 8)
If you cann access the bootloader, your phone isn't allready death! You can flash an image from the MiniSD!
Click to expand...
Click to collapse
I got the same problem, tried to upgrade it to a german rom then it crashed, i cannot access the bootloader mode, and u talked about flashing from the minisd, if u could provide more explaination it would helpful
Please help me!
I tried to build a rom by myself and the first time everything goes right but then I tried to built another one (lighter..) and I flashed it in my Raphael but now when it starts it stays on Win Mobile green first page (where there's written :" Please wait Home page for first usage" more or less..) and nothing happen..
What can I do? Because of this problem there can't be a usb connection and I can't flash my good rom..
Please can anyboby help me?
Sorry for my english..
Put your device in bootloader mode and try to flash again with a working ROM.
To get into bootloader mode... reset with stylus while holding volume down button.
Thank youuuuuuuuuuuuuuuuu
YOU ARE MY PERSONAL HERO!!
REP ++++ for you!
Hello ,
my HTC Touch pro was bricked few months ago
i installed WRONG hard spl
on pc it showed 100% Completed
but i couldnt start my phone
how can i fix this ?
if i use Hard Reset method, i doesnt work , i cant start my phone
have you tried installing a new SPL via storage card (rename spl file to RAPHIMG.NBH and place it on the storage card) and enter bootloader mode by holding the vol down button when powering on the device?
the problem is
i cant start bootloader
nothing is working
I think you got yourself a brick...
Does it at least vibrate?
Run SPLExploit!
Dude, i have the same problem with you too but its not my TouchPro but its my old school Dopod D810. I flashed custom rom (my home cook) but forgot to add sumthin and finally i learned somethin that i can ****up my phones LOL. Just like what i thought my phone wont start and it refuse to enter on Windows OS but atleast bootloader mode still accessible. Thanks God
I search for post how to recover bricked phone (ofcourse on trinity room) and found some tools call "SPLEXPLOIT" it runs on DOS Mode. This program can erase your nand memory which in this case you flashed the wrong SPL and will rebuilt some bad Nand memory too. Good tho
I finally can bring my dead dopod came to life (for almost 1 year i left it on garage) lol. Just asked cmonex! maybe he can help you...
If this tools works universal i'm sure it will worked on TP too! Just asked cmonex for more details...
Run SPLExploit (as Administrator) --> while Enter in Bootloade mode -->
Just make sure that USB Cable was recognized as "USB" on the bottom of the screen not "Serial"!
When its done ....
NOTE: "Dont Soft Reset the phone even when SPLExploit ask you to SR the devices" just go ahead straight away flashing new custom rom or anything you want
Goodluck!
The OP can't get into bootloader, because the bootloader is corrupted/dead. So that isn't going to work.
JTAG is the only way to fix it, and as far as I know, no one knows how to do it on a Raphael.
Maybe playing with BIOS ( if BIOS can be accessed ) might help.
But BIOS can really make ur brick a worse brick if done wrongly please ask for help from the senior most members on Raphael forums.
And request them don't order them.
And if nothing works * I love to say this line *
You Just got Yourself a New Shiny Fine Edged Black Clear 600 U.S. Dollars worth Of a BRICK ! Enjoy !
atjee said:
the problem is
i cant start bootloader
nothing is working
Click to expand...
Click to collapse
Do you tried to start bootloader manually?
You can do that, press and hold Vol down, then reset button (with stylus), release reset (keep vol down pressed) and when the multicolor screen appears then release vol down key
I hope this can help you?
iugalde said:
Do you tried to start bootloader manually?
You can do that, press and hold Vol down, then reset button (with stylus), release reset (keep vol down pressed) and when the multicolor screen appears then release vol down key
I hope this can help you?
Click to expand...
Click to collapse
That is the only way to go to bootloader but as Farmer Ted mentioned his phone ( including bootloader is dead ! )
So i don't think there is any way out for you except if any really senior members can help you with bios or pump in something which starts your bootloader !
atjee said:
Hello ,
my HTC Touch pro was bricked few months ago
i installed WRONG hard spl
on pc it showed 100% Completed
but i couldnt start my phone
how can i fix this ?
if i use Hard Reset method, i doesnt work , i cant start my phone
Click to expand...
Click to collapse
Dude, you might try to PM cmonex. I hear she can do miracles. You can check out this thread and see a miracle there. Who knows? See what can be done. This link will take you to her contact page: http://forum.xda-developers.com/member.php?u=322932. Best of luck to you my friend. Worst case scenario, sell it for parts. Several people around here are always looking to replace "stuff", including me .
the same problem
I did the same thing to my HTC Fuze aka rafael or touch pro, from some reason it was the same thing as diamond and i flashed wrong spl and completely bricked it, no bootloader no nothing. So i went to a service and they said it was a hardware problem so they had to send it somewhere else to be fixed. It took them 3 weeks to get the phone back, in not working condition saying that motherboard was dead. I guess thats what happens when you flash wrong stuff... Now i dont know what to do either. I would like to sell mine for parts if someone is interested or if someone know how to use jtag i would pay him to try to fix it...
Hello everyone.
My HD2 hangs with white screen (htc central and written in red lettering below left) and remains so.
I tried them all (task29 - soft reset - restore the original ROM from SD) but nothing worked.
Anyone have any ideas?
Thanks in advance!
Don´t know, what´s going wrong. If you have done task29, you can go into bootloader mode and connect your HD2 to your PC. If you read USB, you can flash a ROM over PC. I prefer an energy rom, which is running fast and is offered in many languages. If you have done task29, i think the drivers of the sd card weren´t loaded, so you can´t flash a rom from there.
Bootloader Mode: Remove your accu, then mount it in it´s place. Press the Vol Down button, hold it, press short the right Button under the screen (power) and leave it, hold the Vol Down button, until a three colored screen appears. This is the bootloader. There stands Serial. If you connect it tothe PC, there must stand USB. Now you can flash a rom of your choice by double click on the RUU.exe file.
PS: Please use other headlines for a thread, more expressive.
[OFFTOPIC]
Neo XL said:
[......]
PS: Please use other headlines for a thread, more expressive.
Click to expand...
Click to collapse
How much more expressive in the title can one get? put Grrrrr behind the title?
I think you mean explain yourself a bit better in the title.
[/OFFTOPIC]
As to the problem:
We need more specifics:
Can you enter bootloader(not eplicitly mentioned).
Does your computer see your phone?
which version (H)SPL is presented on the bootloader screen?
Which ROM do you want to flash?
Is CustomRUU running?
Is CustomRUU hanging / crashing / finishing? [if so where, which %-age?]
Have you removed SIM and microSD cards?
Please post the sequence of steps and their "exit state [ie successfull / not successfull]"
When do you notice the [problem?
Now I installed the original SPL 1.42.0000 and the original ROM from SD, but the device does not start. remains with white screen and red lettering at the bottom left.
I tried 4 or 5 different ROMs, I tried several soluioni.
I think the only way is to restore the BIOS in some way, but I do not know how.
throw it in da wheelie bin
Wilco said:
[OFFTOPIC]
How much more expressive in the title can one get? put Grrrrr behind the title?
I think you mean explain yourself a bit better in the title.
[/OFFTOPIC]
Click to expand...
Click to collapse
I forgot the smiley behind my sentence
My hd2 volume down button is totally stucked. As like I always hold dow, so just a little bit complicated method help me to not start the bootlogon screen or use the pda (I have to hold down the win button) And I cant tune up the wolume of course.
I used a windows phone seven op before this happend. After I put back the original rom because I thinked the phone7 is a problem. This rom can do this my machine? I totaly wipe the op.
Anybody ever has the same problem? There is any way to repair this vithout service? MY friend said this is a common problem. Is it true?
Thanks for any help.