Please help me!
I tried to build a rom by myself and the first time everything goes right but then I tried to built another one (lighter..) and I flashed it in my Raphael but now when it starts it stays on Win Mobile green first page (where there's written :" Please wait Home page for first usage" more or less..) and nothing happen..
What can I do? Because of this problem there can't be a usb connection and I can't flash my good rom..
Please can anyboby help me?
Sorry for my english..
Put your device in bootloader mode and try to flash again with a working ROM.
To get into bootloader mode... reset with stylus while holding volume down button.
Thank youuuuuuuuuuuuuuuuu
YOU ARE MY PERSONAL HERO!!
REP ++++ for you!
Related
Hi, i'm using a rw6828 and tried flashing with a rom from wantat but i forgotten to delete the EBOOT.nb0 before i clicked "upgrade". Then the program stopped at 6% for a long time and didnt move. I disconnect the cables and tried to turn the device on.
THe device can go into the wm6 and the start button can be use but the screen is "moved" to the right side and other function is not working.
After that, i did a hard reset and the the os seem to work like normal. However, when i tried to go into bootloader mode to reflash the rom again, the bootloader screen doesn't seem to appear.
Is there anyone here that can help me? Thank you.
elus said:
Hi, i'm using a rw6828 and tried flashing with a rom from wantat but i forgotten to delete the EBOOT.nb0 before i clicked "upgrade". Then the program stopped at 6% for a long time and didnt move. I disconnect the cables and tried to turn the device on.
THe device can go into the wm6 and the start button can be use but the screen is "moved" to the right side and other function is not working.
After that, i did a hard reset and the the os seem to work like normal. However, when i tried to go into bootloader mode to reflash the rom again, the bootloader screen doesn't seem to appear.
Is there anyone here that can help me? Thank you.
Click to expand...
Click to collapse
Please try to searching before post new thread. Do u search about dead bootloader, try here
Thank you abusalza for the direction. I'm sorry i didnt use the search function to look up about dead bootloader. I'm actually not sure if it is a dead bootloader thats why i didnt look up in the forums for a specific problem.
Thank you so much for the link and i've discovered something new. I tried using the camera button + soft reset method and what it seems that i might have entered bootloader. But i have no idea what to do next.
Mod please close this. I've posted a new topic with an updated scenario of my problem under the upgrading section. Thanks again abusalza.
Hello.
I just flashed to DCS Touch Pro v14 ROM.. Everything was ok, but when I restored the backup from SPB Backup, device made soft reset and then started my problem.
When I turn it on, it goes to startup HTC animation and then freeze on it.
Is there any way to hard reset or anything that would help me??
Please :-(
You have this info on the Wiki...
http://wiki.xda-developers.com/index.php?pagename=Raphael_For_Beginners
The Wiki is our friend
Cheers
Press :
Vol Down Button + Center Round Action Key + Reset Hole
> Prompt > Vol Up Button > Finish > Vol Up button.
Hope this help.
Lanyz said:
Hello.
I just flashed to DCS Touch Pro v14 ROM.. Everything was ok, but when I restored the backup from SPB Backup, device made soft reset and then started my problem.
When I turn it on, it goes to startup HTC animation and then freeze on it.
Is there any way to hard reset or anything that would help me??
Please :-(
Click to expand...
Click to collapse
Press volume buttons (inferiors) and soft reset at the same time.
When the screen go to about bootloaders still soft reset and "prays".
Bye
Many ppl trying to help
i love this forum...
I just solve it... Thank you for your advices..
Standard hard reset (Vol down + Center button + REset) didn't work - device must be on.
I tried this - Vol down. + Center button and turn on the device, that worked.
Once again thak you.
jcespi2005 said:
Many ppl trying to help
i love this forum...
Click to expand...
Click to collapse
I love this forum very much too But I wont post the previous one if I can see ur post | my connection is lagging like lazy dog
hang.tuah said:
I love this forum very much too But I wont post the previous one if I can see ur post | my connection is lagging like lazy dog
Click to expand...
Click to collapse
ey man, don't care about it... this is just for fun, you know...
Cheers
i just want to thank everyone who participated and answered this.
i almost ****ted a brick a few min's ago..
my device just stopped working it was real weird.. All was fine then i get a error msg saying that "Gyrator has encounterd an error" and BAM black screen. and no matter how many soft resets and batt pulls nothing worked.
so i immediatly signed on here..searched for about 30 seconds and with the 3 key press..all was good..device booted properly, configured itself, and im back on track.
Thanks,
Jstar
I tried the restore and it will not work for me. I can get to the boot loader screen, but it only shows serial and won't let me do anything else.
scaz24 said:
I tried the restore and it will not work for me. I can get to the boot loader screen, but it only shows serial and won't let me do anything else.
Click to expand...
Click to collapse
You need to get out of the GSM rom forum and go to the raphael CDMA forum. Anything you try to flash from here will not work on your device and my brick it.
http://forum.xda-developers.com/forumdisplay.php?f=465
Until you understand the difference between the two standards you shouldn't be flashing anything, as it will not be safe.
Hi guys,
I installed a cooked version (Juggalo TP) on my TP ,after finishing the installation and automatic reboot , my device hanged on HTC BIOS.... !!!!!
PLEAAAAAAAAAAASEEE HELP ME...
i dont know what to do !!!!!!!!
i cant to ANYTHING....
Ive hard reset several times,took the battery out but nothing happens... stilll the same problem.
PLEASE help me ,is there any way to roll back to a previous version or default
or something... :'(((
I really appreciate your help... !!!!
can you get to the tri-colour bootloader of hard spl?
if so you will be able to reflash the rom via sd card?
saied7 said:
Hi guys,
I installed a cooked version (Juggalo TP) on my TP ,after finishing the installation and automatic reboot , my device hanged on HTC BIOS.... !!!!!
PLEAAAAAAAAAAASEEE HELP ME...
i dont know what to do !!!!!!!!
i cant to ANYTHING....
Ive hard reset several times,took the battery out but nothing happens... stilll the same problem.
PLEASE help me ,is there any way to roll back to a previous version or default
or something... :'(((
I really appreciate your help... !!!!
Click to expand...
Click to collapse
hello, try to put it into bootloader and then try to flash a different rom, might b a dump question, but you have installed hard spl?
lupe
yes i have installed the HARDSPL ,but i dont know how to go bootloader,
when i press enter,vol down and reset it comes to a 3-4 color screen but immediately jumps to a white screen and asks me to reset all data (vol up) or cancel (vol down)
btw, i've put a rom on my sd card but nothing happend !
oh man.. pff
maybe you have to rename this rom to RAPHIMG.nbh
Volume down and reset (without the enter) will get you into Bootloader screen. From there is should pick up the ROM on the SD card and ask you if you want to flash.
thnx for the tips bro's.
i did as you said (vol down and reset without enter)
and it asked me to load the image by pushing the enter button and i did.
now its about 15-20min that im waiting and still is on the 3color screen and nothing moves or comes or goes...
is it normal?
finally done. back to normal
oh im so happy , thnx for the help.
saied7 said:
finally done. back to normal
oh im so happy , thnx for the help.
Click to expand...
Click to collapse
glad to here its working again. could you please post exactly what you did as others might find themselves in this same spot, if they know what you did to fix it, it will save them time and also keep them from having to start a new thread.
thanks
Lupe
ya my problem was as i mentiond before i installed a CDMA version(USA VERSION locked on a carrier i think) , because the roms that were cooked are amazing,beautiful and dynamic ... but i didnt know that its not compatible with a normal TP and my phone after installation hanged just on the BIOS screen...nothing goes,nothing comes...i thought i've bricked my phone !
but after your advises i put one of the GSM roms on the SD card and changed the name of ruu_signed.nbh to RAPHIMG.nbh and VOL DOWN + SOFT RESEST to go to the bootloader menu,followed the instructions and finally fixed the problem and installed the right version.
but one thing that i DONT understand is why these beautiful roms are ONLY for CDMA version and not compatible with normal TP's???
thnx for the sharing of your experience with others
Hello everyone
I flashed a rom on my Smartflip, after having unlocked the cid.
Everything worked well, but the first reboot has been fixed on the screen Win Mobile 6.1 and after a SR, not open more windows mobile screen. If I press the power button nothing happens, black screen. I put it in bootloader leaves the writing USB but the PC does not detect it, help please.
Sorry for my English, I'm Italian.
Francesco
check my post.... it's called gold card method, don't be afraid, i had the same problem many years ago and i could resolve it... good luck!!!
U have to boot in tri color mode and flash another rom. Search in the forum. (Is similar to "press the volume up button and the opposite button and power on the phone..) but i can't remember the exact sequence. Search in this forum good luck
Hi,
What is the most recent/best ROM that you use?
Thanks,
Hi,
I was running android from my sd card but now wanted to go the NAND way. I installed HardSPL3 to 2.08 and then flashed MAGDLR to the phone. Everything was fine up to here.
Now the problem bit ....... The call button on my HD2 is depressed(I must have sat on it at some point), however it still worked. When I get to the option screen in MAGDLR and go down to 'flash from usb', the call button does not work, so I can navigate up and down but can't select anything!
I'm stuck in MAGDLR ......... Please help!
......one last thing, if I were to have the fault repaired what am I looking at cost wise.
Any help greatly appreciated
Shab
s_hab said:
The call button on my HD2 is depressed
Click to expand...
Click to collapse
Tell it to stop been a wuss and cheer up
Boom Boom ..... i was looking for help, not your one liners. LOL!
Try removing MAGDLR by flashing your official rom from SDcard. This should remove MAGDLR and get you back to WM.
s_hab said:
Hi,
I was running android from my sd card but now wanted to go the NAND way. I installed HardSPL3 to 2.08 and then flashed MAGDLR to the phone. Everything was fine up to here.
Now the problem bit ....... The call button on my HD2 is depressed(I must have sat on it at some point), however it still worked. When I get to the option screen in MAGDLR and go down to 'flash from usb', the call button does not work, so I can navigate up and down but can't select anything!
I'm stuck in MAGDLR ......... Please help!
......one last thing, if I were to have the fault repaired what am I looking at cost wise.
Any help greatly appreciated
Shab
Click to expand...
Click to collapse
Thanks 10507, it all seems clear now ........ why didn't I think of that. It's loading the ROM as I type.
.....Once again thanks dude!
s_hab said:
Thanks 10507, it all seems clear now ........ why didn't I think of that. It's loading the ROM as I type.
.....Once again thanks dude!
Click to expand...
Click to collapse
Glad, I can help
I did flash a stock ROM from my SD card and everything goes fine untill I reboot the phone. Then the MAGDLR screen shows up again. How can I get rid of MAGDLR now because I need to send my phone back to HTC so they can repair the touchscreen which isn't working.
My HD2 call button and windows button unresponsiveness
Hi all guys, i really need a help..since i've upgrading my rom to 3.15, then my hd2 call button and windows button cant be use..i wanna change my windows mobile to NAND..but, im stuck in MAGDLR..so my friends help me to retrive me WM back..any of u know how to overcome my button back?..it is cause by the rom or hardware damage?..im still beginner in this, kindly hoping for all ur opinion guys..
hd2beginner said:
Hi all guys, i really need a help..since i've upgrading my rom to 3.15, then my hd2 call button and windows button cant be use..i wanna change my windows mobile to NAND..but, im stuck in MAGDLR..so my friends help me to retrive me WM back..any of u know how to overcome my button back?..it is cause by the rom or hardware damage?..im still beginner in this, kindly hoping for all ur opinion guys..
Click to expand...
Click to collapse
If you download and flash the official ROM for your HD2 you can flash it via bootloader. While your phone is off press and hold down the volume down button. Connect your phone via USB cable and wait until you see USB in the white bar of tbe bootloader screen and your computer to show it recognizes ths phone. Right click the ROM package and click run az adminostrator. The ROM should flash and remove MAGLDR, bit it has to be an official ROM as a custom will not remove MAGLDR. After flashing is done put phone back into bootloder to check SPL version. You want the SPL of the ROM you flashed. If it is not righr download HSPL 4 and use it to set the correct SPL, hint you want the SPL x.xx.0000 not SPL x.xx HSPL.
If you want to just to make sure flash the official ROM via SD card and it should remove MAGLDR, CWM, and HSPL if house have them. Go here to learn how to do this.
what happens if your down volume button doesnt work. is there any way to flash back to your old rom using magdlr? my call button still works but every time i put it on usb flash and try to install the original rom it doesnt seem to work
Pls Sir Help Its Urzent ???
My Htc HD2 . I try To Change WM to Android . But When I try to select USB FLASHER MODE On MAGLDR . My Call button Not Working (I Never Try To Using Call Button Before) .... Now What Can I DO ?????
Pls Anyone Help Me ?????