Need Bootloader 1.04 HELP!!! - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

Hi all,
I need bootloader 1.04, I can't find it anywhere in forum. I need it to flash radio on my Hermes.
I think I should use this: HERMING_IPL1.01_SPL1.04_ONLY.nbh, but I am not sure and I also cannot find it.
Thanks for help

I will add that I have IPL 1.01 and when I connect it to PC via USB in bootloader mode to upgrade to IPL 1.04 by mtty, mtty doesn't find any device connected to usb

I've got the same problem... Help us please

Heniek_W said:
I will add that I have IPL 1.01 and when I connect it to PC via USB in bootloader mode to upgrade to IPL 1.04 by mtty, mtty doesn't find any device connected to usb
Click to expand...
Click to collapse
could you plz tell to how upgrade the bootloader via Mtty ?

the mtty only works in some SPL version dunno how many of them or wich of them.
this problem of yours is because you all dont read
first HSPL obviously you cant do that right now so find a stock rom accordly to your carrier and country lang

Related

Hermes bricked in tricolor mode IPL-1.04 , SPL-2.10.Olipro

Hi i'm newbie
I'm french thus excuse me for my english
I try to upgrade my htc in WM6, i sucess, no problem.
After i upgrade with a rom radio and the upgrade block at 40 %.
Now the phone boot in tricolor mode.
IPL-1.04
SPL-2.10.Olipro
I find in the forum that for unbricked my htc i must to flash any rom in nbh format.
How to do that.
I try to install also original ROM_9600_FRA_10303.exe rom but activsync it not active.
Someone can help me please
thanks
Connect you device in bootloader screen with your PC with USB and you should see USB appear at the bottom of the screen on yor device. Now flash any .nbh with the RUU wrapper and select SPL 2.10 New bootloader and flash the ROM...
what is the RUU Wrapper, where can i download it?
unikgwada said:
what is the RUU Wrapper, where can i download it?
Click to expand...
Click to collapse
Here it is
RUU wrapper is a software?
Explain me which is it
unikgwada said:
RUU wrapper is a software?
Explain me which is it
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=298737
when i use RUUWrapper i havbe an error [260].
What i can do
In the tri color screen with the device plugged in via USB do you have USB written at the bottom? Does your device appear in the device manager?
Yes USB is written on the bottom, and yes the phone appear in device manager .
What are you using XP or vista?? You could try a different USB port or if that doesn´t work you may have to roll back the driver... read this http://forum.xda-developers.com/showthread.php?t=299657
I'm using XP.
When i use myyt.exe the phone make something, but when i try to upgrade any rom i have always this message error [260]
i try to update with rom radio 1.47.00.10 , the upgrade is correct 100%
but when i reboot i return in tricolor mode
I success to install rom with UUwrapper but now the phone block on the picture windows mobile
Thanks
i fine a the solution
Could you please share the solution ? I've got a similar case, thanks.

Need Hermes Stack Overflow exploit - how to unbrick any Hermes stuck in bootloader

I unbrick my htc p3600 with HTC Trinity Stack Overflow exploit - how to unbrick any Trinity stuck in bootloader!! Can somebody create Hermes unbrick because when i use Hermes i always see message image corrupted because i not have activesync in my HERMES stack in logo only bootloader!!!!Cid locked!!! i can not intsall any rom hardspl...etc...try more then 50rom and all hardspl...all cid....now only see this http://forum.xda-developers.com/showthread.php?t=308691 for Trinity IS ANY CHANCE TO CREATE splxploit FOR Hermes with spl.nb THAT CAN RUN FROM DOS and change bootloader sspl ??? Sory for my bad english please need help where is pof???
please read here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
this not work because i ask to someone create Exploit???
this not work i try all i not have kitl mode , and can not use SSPL+ActiveSync because i stack in bootloader-no active sync my problem is to change bootloader when device is cid locked only solution to create Hermes overflow exloit and when i have temporaly cid unlock my device then i can flash rom.
Flash a cooked ROM, leave the device in bootloader mode, connect with USB....run the RUU and select your bootloader version.
The RUU shouldnt care that the device is already in bootloader mode, just follow the usual steps.
Explain me more because
when i try to flash RUU SPL Downgrade Guide from http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
100% then always receive message image corrupted.
I WANT TO UnBrick the Bricked Hermes with "SPL 2.03 - IPL 1.04 - NO GSM - KITL Disabled"
There are many people have this kind of brick but still no solution for it.
I want to ask the mods to make this thread sticky so if anyone find a sulotion for this type of brick would post it Here.
Summary :
IPL: 1.04
SPL: 2.03
CID: NO SUPER CID LEVEL=FFF
NO GSM
KITL Disabled
I have tested all the possible sulotions available in the wiki but none of the could help me unbrick my hermes.
P.S. : Please just post your sulotions here NOT your comments like "you CAN TRY THIS I TRY ALL IN XDA DEVELOPERS",
----so is any good man in this forum can fix this and create Hermes Stack Overflow splxploit HERMES to create
HERM100
IPL-SSPL by des
HERM100
SPL-1.09.ds - to temporaly fix and unlock cid first then we can flash any rom?? or any other metod.. ......can you explain please.???
How to jump spl address in hermes from dos??
Is any chance to jump spl to address in hermes or artemis from dos or mtty command what is spl address for hermes bootloader for artemis spl address is:.
* Kaiser Jump address is 0x00000000
* Artemis & Herald Jump address is 0x10000000
How to chenge bootloader in cid locked demaged
cid in hermes ???? HTC Trinity Stack Overflow exploit have this read in :
http://forum.xda-developers.com/showthread.php?t=308691
Who can explain and create for hermes?????
It's wierd!!!
there is no sign of POF and olipro!
I want to know where are they!!!
Maybe they are hired by HTC
Unbrick of Hermes IPL 1.04 SPL 2.03
mbsshop1302gsm said:
when i try to flash RUU SPL Downgrade Guide from http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
100% then always receive message image corrupted.
I WANT TO UnBrick the Bricked Hermes with "SPL 2.03 - IPL 1.04 - NO GSM - KITL Disabled"
There are many people have this kind of brick but still no solution for it.
I want to ask the mods to make this thread sticky so if anyone find a sulotion for this type of brick would post it Here.
Summary :
IPL: 1.04
SPL: 2.03
CID: NO SUPER CID LEVEL=FFF
NO GSM
KITL Disabled
I have tested all the possible sulotions available in the wiki but none of the could help me unbrick my hermes.
P.S. : Please just post your sulotions here NOT your comments like "you CAN TRY THIS I TRY ALL IN XDA DEVELOPERS",
----so is any good man in this forum can fix this and create Hermes Stack Overflow splxploit HERMES to create
HERM100
IPL-SSPL by des
HERM100
SPL-1.09.ds - to temporaly fix and unlock cid first then we can flash any rom?? or any other metod.. ......can you explain please.???
Click to expand...
Click to collapse
Hi
I had the same problem, I tried I think all the tips I read on the forum, finally I put my phone in Bootloader mode, I uncheck usb connectios on active sync, and the most important thing I tried with the following ROM: RUU_hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship for my surprise after trying will all kind of roms, this one did the installation of a new radio and finished with 100% in downloading the new OS and radio GSM, I have a working Hermes! If I could help in anything let me know
edyfast said:
Hi
I had the same problem, I tried I think all the tips I read on the forum, finally I put my phone in Bootloader mode, I uncheck usb connectios on active sync, and the most important thing I tried with the following ROM: RUU_hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship for my surprise after trying will all kind of roms, this one did the installation of a new radio and finished with 100% in downloading the new OS and radio GSM, I have a working Hermes! If I could help in anything let me know
Click to expand...
Click to collapse
Did you have exactly the same problem with
IPL 1.04
SPL 2.03
NO GSM
NO CID
KITL Disabled?????
and if it's true,is that ROm a WM5 or WM6 ROM??
Tested! But DID NOT HELP!!!!!!!!!
8525 bricked IPL 1.04 spl 2.03 Solution
koorosh_bsboys said:
Did you have exactly the same problem with
IPL 1.04
SPL 2.03
NO GSM
NO CID
KITL Disabled?????
and if it's true,is that ROm a WM5 or WM6 ROM??
Click to expand...
Click to collapse
Hi
It is a WM5 Rom, this is the only one I tried that worked at the first try!, however it seems at the beggining that wont work because it takes too much time to advance in the percentage bar on downloading, for me took about 35 minutes, the good notice is that this rom completes the installation and installs a WM5 but it is a good start since once you are done with this you can install hard spL on your phone, you mentioned that didn´t work please be patient if you notice that the percentage bar is working, at the end this will fix your phone.
where
can you sent me link to download or put in megaupload to try this rom please respond its very urgent to try.Sent me link to download??
And if my phone cid locked this will work or not???/
Unbrick 8525 IPL 1.04 SPL 2.03
Hi
here is the link:
http://rapidshare.com/files/25381512/RUU_Hermes_CINGULAR_WWE_2_1_.15.502.3_6275_1.40.30.00_108_Ship.exe
My phone was cid locked and KITL disable before I fixed it! now I did the unlocking using PoFs cid and sim unlocker and it worked fast and easy at the first try!
I understand your urgent requierement I was 15 days with my phone damaged with the only showing of IPL 1.04 and SPL 2.03 "serial" text on the bottom.
This Link Not No File Found
CAN YOU UPLOAD NEW LINK this link is dead :http://rapidshare.com/files/25381512/RUU_Hermes_CINGULAR_WWE_2_1_.15.502.3_6275_1.40.30 .00_108_Ship.exe
please use megaupload.....respond me please when you add new link.
THIS LINK is dead NO FILE FOUND
This will not work only solution to unbrick any Hermes stack in bootloader cid locked that somebody create Herems Stack Overflow exploit - ANY CHANCE TO CREATE splxploit FOR Hermes with spl.nb THAT CAN RUN FROM DOS and change bootloader sspl temporaly tehn we can flash any rom ???
Here is link for Trinity and work i unbrick my p3600 with this cid locked stack in bootloader:
http://forum.xda-developers.com/showthread.php?t=308691 for Trinity IS ANY CHANCE TO CREATE splxploit FOR Hermes
Sory for my bad english please need help where is Pof to creat this for Hermes??Imei check and htc men help??
How to unbrick herm100 in tri-clour mode
download Mtty1_42.
CONNECT brick herm100 with usb
FROM the port setting,choose USB
A white page should open
TYPE set 14 0
TYPE set 16 0
soft reset with stylus.
HURRAY u are down.
dont 4get to say thanks

I need help

Hi, I was unlocking my htc 8525 at&t but i was using vista and my cell keep in Type 2a: When the phone boots, it goes directly to bootloader mode (tri-color screen)
what can I do to fix it... tks
Whats the info for your SPL?
Hi, I got my Hermes 8525 in boot mode what i did is to install this Schaps_WM6Pro_WWE_4.00_Full.exe now my hermes is working but i want to unlock it..what can I do cos everytime i try got in to boot mode again..any help tks.,..
SPL- 1.40
Try unlocking it with Windows XP
hi, i tried in win xp but keep the same in boot mode...
On the PC, in activesync settings, untick "Allow USB Connection".
Put Hermes into bootloader (tri-colour screen) and then run the RUU_Wrapper.exe file of the unlocker program. Follow all the instructions to unlock your Hermes and once its unlocked put Hard SPL V7 on it BEFORE flashing any thing else. After flashing Hard SPL V7, go back to bootloader and check SPL is 2.10 oli.
You now have a Hermes that is easier to recover if somehing goes wrong with a flash, excluding radio rom flashes.
Cheers...
Hi, canu put the link of the program u told me to use..tks for your help..
RUU_Wrapper.exe, Its included in any rom you want to flash. Its how you flash using the PC...
Hard SPL is in the sticky of the Hard SPl thread in upgrading section.

Ultra bricked my Tytn !

I need your help
My tytn is bricked
The Bootloader shows me HERM200 IPL-1.01 (White font, Red line)
HERM200 MFG SPL-1.01 (Yellow font) Redline)
I cant connect with my active sync anymore
The OS do not boot anymore
It shows my "no gsm"
It freezed by Windows Mobile Screen !
What can i do ?
Can anybody repair it ?
My english ist so bad, i come from Germany. SRY
I hope anybody can help me
Freeheld
press these buttons together: side ok button, power button and reset button,
then the HTC will go in USB mode and use some rom to flash it
thx for ur answer
when i try to flash it says me Error connecting
actice sync doesnt find my Tytn no conection
the tytn goes to the grey flash screen and interrupt it
can anybody tell my the right ROMs ?
i need a german roms and german radio rom
i have found my bricked Type
SPL HTC_BOOT Boot OS? No GSM? KITL
1.01MFG <=0107 No Yes ---
Diagnostic
bricked while flashing radio
Solution
Flash any type2 radio in NBF format, run RUU 2 times. If that doesn’t work, flash the radio using HERMflasher
i cant find "type2 radio roms in NBF format"
How i can see my HTC_BOOT ?
I crashed my tytn so hard
A new problem
Microsoft ActiveSync cannot recognize this device for one reason:
*The device was not connected properly.
.
.
.
And so one
How i can flash an new right ROM ?
You can flash from the SD-Card:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Here are the radio ROMs:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Thx but it doenst worked
i get an error
Loading...
than cant find file
but i renamed it write ???
how i can see that i have hardSPL
i dont beleave that i have it
and i cant install it because my activsync doenst work
If you're using XP - untick "Allow USB Connections" in activesync on pc. Put Hermes into bootloader and run the flash for Hard SPL V7. If this works then try an sd card flash for a different rom. No guarantees it will work but at this point, what have you got to loose?
Good Luck...
it doesnt work very well
i get an UPDATE ERROR
hmmmm
active sync is unticked (USB)
i have found a problem
i had flasched the bootloader 1.01MFG without SuperCID now i get Level= FF in mtty.exe, so i can flash back to 1.04 to install HARD SPL
How can i come back to 1.04 ?

I Want SPL Upgrade HTC 8525 My Spl is 2.03

hello, I Have Windows Mobile Hermes
Cigular 8525
IPL 1.04
SPL 2.03
and i want upgrade spl
Because Need Rom Upgrade.
Please Help.
Thanks.
Anybody Please Help!
When I Run Hard-SPL-V7
Says: Cannot Connect
USB Error.
system32s said:
When I Run Hard-SPL-V7
Says: Cannot Connect
USB Error.
Click to expand...
Click to collapse
have you tried to flash via SD card..?? to obtain the guidance of Hermes SD Card flash, go to >>> http://forum.xda-developers.com/wiki/index.php?title=Hermes_SDCardFlashing

Categories

Resources