Problems while hearing music! Phone gets a black screen... - TG01 General

Hey,
I got a problem with my TG01.
I have the problem, that if I use a mediaplayer (it doesn't matter if it's the WMP, Coreplayer, Nitrogen, S2P...), I get black screen after some time and the phone is locked...but music still plays.
But if I push the On/Off button to unlock it, then nothing happens...
Only chance I have to stop the music then is to remove the battery.
And for me it seems that it's not a soft problem.
I tried almost all Roms that are around here. I had this problem with all Roms.
Could somebody confirm that this bug is available?
Maybe someone could help me to solve the problem.
Thanks in advance and best regards!
DunkDream

Try to keep power button pressed for sometime. In nitrogen I use the button which makes screen black, then if You want to turn it on back You have to press camera button and screen is on! Try It!

Thanks for the hint, that works with Nitrogen just like a charm !
Why didn't I ask earlier
Thanks alfi!

Related

Stop 8525 from turning on screen during headphone button press?

Is there anyway to stop my 8525's screen from turning on when I press any of the media control buttons on my motorola s9? Its really annoying when I have to turn the screen off whenever I change a track or pause a song
Same thing happens on HTCBT S-100.
Help! It's annoying!!!
I'd like to know this as well. Using the Sony Ericsson HBH-DS980 with my TyTN.
I cant believe that no one seemes to care for this problem!?
Have any one found any solution???
I tried to use several screen shut down programs, but none seemes to be working if pressing the BT button.
Have any one thought of any other solution?

HTC problems

Hey guys i have a HTC touch pro and my power button keeps going on and off by itself its almost like its stuck it has nothing to do with the button itself cause i have removed the power button but it seem to still do the same thing the pop up comes up "dou you want to turn off device" it happens like every few seconds so i basicaly cannot not do anything for more than a few seconds then it pops up, also when the phone is off it will switch it back on automaticaly. i have installed the remaping key program it has seemed to make it stop but i have lost all my buttons now only touch screen works when it ask me to add a button press and release iv tried but nothing happens in the pop down it says "none" so if there are anyone that can help me with this it will be most appricated and if there are another way of fixing the power button or other programs please let me know and i will give it ago. Many thanks
200gxi said:
Hey guys i have a HTC touch pro and my power button keeps going on and off by itself its almost like its stuck it has nothing to do with the button itself cause i have removed the power button but it seem to still do the same thing the pop up comes up "dou you want to turn off device" it happens like every few seconds so i basicaly cannot not do anything for more than a few seconds then it pops up, also when the phone is off it will switch it back on automaticaly. i have installed the remaping key program it has seemed to make it stop but i have lost all my buttons now only touch screen works when it ask me to add a button press and release iv tried but nothing happens in the pop down it says "none" so if there are anyone that can help me with this it will be most appricated and if there are another way of fixing the power button or other programs please let me know and i will give it ago. Many thanks
Click to expand...
Click to collapse
It looks like you may have a hardware issue (on the board). Did the phone get wet or damaged in any way?
hey thanks for the reply, the phone just started doing it out the blue HTC has replace the mother board 3 times and the problem still occurs i even removed the power button completely and still no luck!
200gxi said:
hey thanks for the reply, the phone just started doing it out the blue HTC has replace the mother board 3 times and the problem still occurs i even removed the power button completely and still no luck!
Click to expand...
Click to collapse
I know that the hardware starts acting funny if it get wet since the contacts for the buttons can short out. I would get HTC to take another look at it. Also, make sure that you are not damaging the device accidentally by crushing it in your pocket or things of that nature.

[Q] touch screen not responding

get this problem since yesterday
the phone worked great but than the touch screen stop responding
all other "buttens" work great (such as send / end / volume etc.)
tried to soft reset and still not working
tried to hard rest still not working
any other suggestions?
happened to me. even after flashing/ reflashing roms.
found other threads and it is not an uncommon problem.
solution only seems to be - bring it back and hope you have a warranty.
Yep, same here, hardware problem, fixed by HTC with new screen module.
This recently happened to my GF's phone, She said she was just playing a game one day, it froze so she popped the battery out and rebooted. Now every time she uses the End/Power ( red ) hard button to shutoff or wake up the device, the screen stays locked and won't respond. The screen works when device first boots, but as soon as it goes out it won't respond anymore.
I have tried soft reset, hard reset, different lock screens and what not. The only solution I found, besides sending it in, is to let the screen shut off by itself, and then wake it up with the Call/Send ( green ) hard button.
You can also try using the End/Power hard button to lock it, but then as long as you wake it with the Call/Send hard button it should be fine.
It has worked every time now. Try it and see if it helps! It's a little annoying but it saves money and insurance!
Going to repost this in all those previous listed threads to see if it helps anyone else.
Good Luck!
vtothet said:
This recently happened to my GF's phone, She said she was just playing a game one day, it froze so she popped the battery out and rebooted. Now every time she uses the End/Power ( red ) hard button to shutoff or wake up the device, the screen stays locked and won't respond. The screen works when device first boots, but as soon as it goes out it won't respond anymore.
I have tried soft reset, hard reset, different lock screens and what not. The only solution I found, besides sending it in, is to let the screen shut off by itself, and then wake it up with the Call/Send ( green ) hard button.
You can also try using the End/Power hard button to lock it, but then as long as you wake it with the Call/Send hard button it should be fine.
It has worked every time now. Try it and see if it helps! It's a little annoying but it saves money and insurance!
Going to repost this in all those previous listed threads to see if it helps anyone else.
Good Luck!
Click to expand...
Click to collapse
AH, you sir saved me. I was freaking out, I have the EXACT same issue and using the call button does the trick. The power/end button locks the screen everytime to where the touch no longer works. Thank you

Hero-Power Button problem

Hello guys. At first i´m so sorry for my bad english, so i´ll show you a video of my problem.
Phone - HTC Hero, Android 2,1
Video:
I can´t post outside links in my messages...
youtube. com/watch?v=V1BwQZsoKCk
It will not go to sleep mode when pressing the end/power key. But it still takes phone OUT of sleep mode, but now I have to wait for the screen timeout instead of pressing the button again.
I tried to find answer to my question, but i failed... I tried Reboot, Spare Parts - i don´t know if it worked properly, Hard reset, but the power button still not working properly.
Thank you! Marty
Restore you phone to the default setting and softares
Sent from my awesome X8 using Tapatalk
I tried that... No results
Marty Chill said:
I tried that... No results
Click to expand...
Click to collapse
Try to restore your phone to the default, or try to install a custom rom
Sent from my awesome X8 using Tapatalk
Now i did a ROOT and i try to flash in some ROMs but it still not works + it cancels my outcoming and incoming calls...
Sounds like you have a failing power button.. like I do.
It's a real pain in the ass... been looking for solutions for quite a while, besides physically replacing the circuit board the button is on...
I know this is old but for anybody researching the same problem... after trying MANY different apps for taking over power button tasks, the only real solution was to buy a replacement "Flex Cable" assembly on eBay. Takes some bravery to install but everything works now.
But that's just my experience.
I suppose that the simplest way out id button remapper that you can find hear at xda.
By using such software you can easily turn any of the other physical keys of your device into the power button.
lucaoldb said:
I suppose that the simplest way out id button remapper that you can find hear at xda.
By using such software you can easily turn any of the other physical keys of your device into the power button.
Click to expand...
Click to collapse
True, and they did work once the phone was up and running. However, when something went wrong on my rom and I needed to get into recovery to re-flash... I was SOL.
Yes, remapping is applied only after the kernel is loaded... So remapping is quite useless if the phone is switched off.

[Q] Power button problem

Heey i have a problem with my power button. Had this problem before but it was gone after one day. The problem is my powerbutton isnt functionaly like it has to be. It changes from time to time.
Sometimes it doesnt work at all when i push the powerbutton.
Sometimes it works slowly. And when i have pushed te button couple of times, i get a phone with screen on, off, on off etc. Like it has lag or something.
When my powerbutton wasnt working yesterday, I saw that the button was pushed the whole time. I mean when you push powerbutton and homebutton you make a screenshot. If i only pushed the homebutton it was making a screenshot.
This things change from time to time. Any one got any ideas????
Im not even sure if its my button that is failing or it has to do something with software.
btw i already tried reflashing rom and kernel with no result.
thx in advance
It's the button, not the software that is the problem. Try taking off the back cover and cleaning out whatever dirt/lint that could be under the button.
i tried that already but it doesnt seem to work. Looks like i have to go back to stock rom for warranty. Hope this is going to be possible since my powerbutton isnt working.

Categories

Resources