I've been working on getting Wifi working in my port of ZenEXP 0.9.4.2 for the heroc, on my desirec (Eris). This is the error I'm getting in adb->logcat, and I'm not sure where to go from here:
Code:
E/WifiService( 101): Failed to load Wi-Fi driver.
D/SettingsWifiEnabler( 646): Received wifi state changed from Unknown to Enabling
D/SettingsWifiEnabler( 646): Receieved wifi state changed from Enabling to Unknown
I would really appreciate some guidance.
Thanks in advance,
-mak
Nevermind! All fixed up now..
.mak said:
Nevermind! All fixed up now..
Click to expand...
Click to collapse
So, what was the fix? Just curious. I've had this issue also.
Dear God, i'm bothered by this issue now............
how to fix up?
I have the same issue on my Tattoo.
Please share with us how you fixed it.
maybe wlan.ko modules is not loaded
I have the same issue on my inc.
Please share with us how you fixed it.
.mak said:
I've been working on getting Wifi working in my port of ZenEXP 0.9.4.2 for the heroc, on my desirec (Eris). This is the error I'm getting in adb->logcat, and I'm not sure where to go from here:
Code:
E/WifiService( 101): Failed to load Wi-Fi driver.
D/SettingsWifiEnabler( 646): Received wifi state changed from Unknown to Enabling
D/SettingsWifiEnabler( 646): Receieved wifi state changed from Enabling to Unknown
I would really appreciate some guidance.
Thanks in advance,
-mak
Click to expand...
Click to collapse
Well, you were asking for help, once you fixed it you never replied others how you fixed it. Is this the way to seek help?
I had this problem while porting MIUI and solved it by copying over a working libhardware_legacy.so.
Related
Hi
I need some help on syncing with a exchange server on my Qtek 1010. It worked perfectly but then I upgraded to rom dev 1.2 and then I even tried ppc2003 wich I have on right now. The problem is when I try to sync with a server it gives me the error code internet_29. I checked the ip on my device and I recieved a 192.168 adress and I guess that i correct. There is not much to configure for passtrhrough connection so I wonder if anybode ran into this problem.
Where does the device get the IP?I checked the networkcard in the setting area but they are saying not connected!!!
Is there a bug in the newer roms?
Please help.Any ideas would be appriciated
//Lasse
Working on modding a rom, but I can't figure this out - the internet works, I can browse just fine, send and receive text messages and calls, but when i try to set up Google I get an error saying I don't have a network connection OR a reliable connection can't be established. here's the logcat from the portion I think is causing the problem.
E/ActivityThread( 1183): Failed to find provider info for android.server.checkin
E/copybit ( 80): copyBits failed (Invalid argument)
E/libagl ( 80): copybit failed (Unknown error: -22)
I/XT9IME ( 226): [finishInput]
I/HTCIMEService( 226): [setWCLText]: wclText=, candIdx=0
I/HTCIMEService( 226): [finishInput]:
I/ActivityManager( 80): Displayed activity com.android.setupwizard/.LoginActiv
ityTask: 530 ms (total 530 ms)
Click to expand...
Click to collapse
Anyone know what might be causing this? Do you need any more information from me? I've checked and double checked, my APN information is all correct and I have a connection from T-Mobile.
OK, I think I figured out the problem - Google settings provider says (logcat) it was built for SDK 7 and this rom is running 6. I tried to simply trick the system to think it was 7 by editing the build.prop but that didn't change a thing.
I've also gotten several logcat errors on boot that say "wrong APN" even though it actually has the right APN (I can receive calls, make them, browse the web, etc) and I've confirmed by APN settings with T-Mobile.
Finally, I'm also getting some errors in logcat saying that the apk's were made for AOSP, but this is a release (Hero port). Not really sure where to start looking for a resolution.
I'm still reading through pdk.android.com, all of cyan's information and a ton of other documentation from other coders, btu I can't find direct reference to these problems. How do I delve deeper into my logcat? Where do I find information on these problems?
Any suggestions on the best way to track this down would be helpful and more than appreciated, I'm still elarning HOW to debug.
I'm just looking for a point in the right direction, something I can research - you don't have to fix the problem for me
EDIT: I think it might actually be the libs - specifically android_runtime and android_servers
For some reason it just all of a sudden stopped working. No idea why but now when I try to enable it it just says "Error".
Is there a log file or something to diagnose what this error is? I've uninstalled all possible Wifi apps that may be interfering to no avail.
I've also tried a 3rd party tethering app and still no go.
Rooted KG2, stock ROM 2.3.3
Okay, here's what I've discovered so far.
I installed Barnacle and when I went to run it, I got the error:
Starting...
Data network is ready
.ini file prepared
WIFI: drive loaded
WIFI: wpa_supplicant started
NAT: restart: Network is down
NAT: waiting for local interface
WIFI: Failed to connect to supplicant: No such file or directory
Stopped unexpectantly!
And then it tells me that "Barnacle had trouble starting wpa_supplicant. Try again but set "Skip wpa_supplicant" in settings." And once I set that it works properly.
Now I'm wondering, I had used SD Maid and ran the "Clean System" and "Optimize DBs". I'm afraid that while running those 2, it deleted something that is affecting this "wpa_supplicant" thing.
So with that said, can anyone help? Thanks.
I'm at my wits end. Can anyone suggest how I can diagnose this problem? Please and thanks.
My wife has an S2 also. Does anyone know if there's a tethering config folder I can copy from hers to mine that might fix this problem? Anyone??
Hey!
I´m developing an application for backing up different kinds of information stored in a smartphone.
Therefore I need to send the data from my device to another hardware, I want to realize it via Bluetooth but.
I use a bluetooth - module called "JY-MCU" for the external hardware I send the data to.
So faar so good, the only problem I have is the bluetooth connection which breaks up while sending the data.
E/bt-btif ( 905): unknown send() error, sent:-1, p_buf->len:93, errno:32
That's the LogCat entry I got.
I googled the errors but was not able to find any answer...I hope you guys can help me interpreting this error.
Thanks
markus
hi to all, i'm a newbie on this forum, and i know this may not be the right place for this 3d, but i don't have enogh messages to write on developer topic.
I've a strange behaviour on my galaxy S advance.
I've installed Harhjely 3.2 with cocore 8.2 and CWM, with HJ 3.0 all works fine, i've upgraded to 3.2 but tethering is not more working.
Doesn't work neither wi-fi and bluetooth tethering.
I found the problem but i don't know how to fix it.
essentially the problem is on the dhcp server,
I'm able to see wi-fi connection from different devices to my phone, i can see on the tethering table the mac address of my pc and the ip address reserved to it, but the pc doesn't acquire the address and after a lttle it assigns itself an ip from PIPA netwoek (169.254.0.0/16 ) and so is not able to use the phone to go to internet.
I tried different devices (many laptop with different OS, tablet and others phones), but no luck, dhcp server is not working properly.
Any idea how to fix it ?
still not working
i tried to update to 4.0 version of harshjelly, but no luck, tethering is still not working.
i put here a log taken with logextreme during tethering process (device is able to connect, phone seems able to give it an ip address, but no one ip address is released), so please if any of you is able to give me an hand i'll be extremely gratefull.
Tethering is crucial for me, if i'm not able to make it working, i need to revert to stock image that i hate, but tethering works...
Please help me:
many thanks
kasparh said:
i tried to update to 4.0 version of harshjelly, but no luck, tethering is still not working.
i put here a log taken with logextreme during tethering process (device is able to connect, phone seems able to give it an ip address, but no one ip address is released), so please if any of you is able to give me an hand i'll be extremely gratefull.
Tethering is crucial for me, if i'm not able to make it working, i need to revert to stock image that i hate, but tethering works...
Please help me:
many thanks
Click to expand...
Click to collapse
ok, i solved the issue, i flashed from scratch and re-installed, now all works like a charm.
thanks for the help