Hi, I've got this problem:
My device: HERM300 (T-mobile MDA Vario II)
IPL: 1.01
SPL: 2.03
No KITL
No MTTY
Errors while flashing ROMs (260, 270, 274, ) via USB
Errors while flashing ROMs via SD card ( numbers in red 00028002 or error 00068002) so it's impossible. I don't know if it is HardSPL, but I know that it's impossible to flash any ROM (including CID unlocking + HardSPL + original + cooked ROMs)
I tried everything possible, except JTAG, so, if you have any other advice, Help me please....
P.S. Bootloader works, but it's unable to load any ROM
Edit: Original shipped ROMs gives me Error 294 - Invalid Vender ID
you need to found your phonecompany country rom original
Related
I'd like to install the 3.54b italian Shaps Rom.
I followed all the guides I found.
I installed hardV7 and now I have IPL 1.04 and SPL 2.10-olipro but when I try to uograde the Radio or the Shaps Rom ( in autodetedt mode as instruction) I received this message:
"Error, unknown version! You should pick SSPL"
I tried to launch the SSPL-HERM too that returned me I'm ok but nothing...I can't upgrade my TYTN Herm200.
In What am I wronging?
I can't find a solution for my issue on Forum
Thanks for your support
Could I try with forcing SSPL when I update the ROM's or is it dangerous for my device?
Thanks
Help, Pls, My MDA always stuck on the three-colored bootloader screen
IPL 2.21.0001
SPL 2.21
What do I have done so far:
1. I used HardSPL (My telephone worked normally then )
2. I pay 20 Paunds for IMEI-CHECK. It after Unlocking restarted and went always In three-colored bootloader screen
IPL 2.21.0001
SPL 2.21
3. Try CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe. The procedure passes through but I next again continue on the three-colored bootloader screen
4. Try Wizard_Love_2.26.10.2_WWE_Novii_CF2. (The procedure does not goes. It allows mistake ERROR [300] : INVALID UPDATE TOOL)
5. Try RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship.exe -ERROR [294] : INVALID VENDER ID
6. Try MDA_software_update_226102_22610105_022511.exe - ERROR [294] : INVALID VENDER ID
7. Try RUU_Molski.Biz_AKU2.3-226102_22610105_024711_WWE-30MB-CF2-G4.exe - ERROR [300] : INVALID UPDATE TOOL)
You help out please for I worry really. I bought the telephone and possibly burned him down just.
iivan said:
Help, Pls, My MDA always stuck on the three-colored bootloader screen
IPL 2.21.0001
SPL 2.21
What do I have done so far:
1. I used HardSPL (My telephone worked normally then )
2. I pay 20 Paunds for IMEI-CHECK. It after Unlocking restarted and went always In three-colored bootloader screen
IPL 2.21.0001
SPL 2.21
3. Try CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe. The procedure passes through but I next again continue on the three-colored bootloader screen
4. Try Wizard_Love_2.26.10.2_WWE_Novii_CF2. (The procedure does not goes. It allows mistake ERROR [300] : INVALID UPDATE TOOL)
5. Try RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship.exe -ERROR [294] : INVALID VENDER ID
6. Try MDA_software_update_226102_22610105_022511.exe - ERROR [294] : INVALID VENDER ID
7. Try RUU_Molski.Biz_AKU2.3-226102_22610105_024711_WWE-30MB-CF2-G4.exe - ERROR [300] : INVALID UPDATE TOOL)
You help out please for I worry really. I bought the telephone and possibly burned him down just.
Click to expand...
Click to collapse
You have a G4 IPL and a G3 SPL !
What that does is letting you start in bootloader, but not letting you write anything because the G3 chip the SPL was written for is quite different from the G4 chip it has been put on.
As far as I have been told, it's a sure brick.
This happened after you tried to unlock with imei-check's tool?
Yes for sorrow. Is got after i use M3000v4Unlock.exe from IMEI-CHECK
I had before that Windows but my SIM is lock to Tmobile.
I fell after unlocking in this situation.
IPL 2.21.0001
SPL 2.21
You help out please, if it is possible !
iivan said:
Yes for sorrow. Is got after i use M3000v4Unlock.exe from IMEI-CHECK
I had before that Windows but my SIM is lock to Tmobile.
I fell after unlocking in this situation.
IPL 2.21.0001
SPL 2.21
You help out please, if it is possible !
Click to expand...
Click to collapse
It's impossible to re-flash a phone in this state.
The G3 SPL has no way to write to the G4 chip as far as I know.
same problem
I have the same problem
any news about it
the-equinoxe said:
It's impossible to re-flash a phone in this state.
The G3 SPL has no way to write to the G4 chip as far as I know.
Click to expand...
Click to collapse
But G4 has way to G3
I have a G3, a day i missed when i flash the SPL for G4
Now my G3 is IPL 1.01 / SPL 2.20.0001
anyone helpme please
Tx
I give more information I hope you are able to help.
Cmd>set 32 2
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = FF
HTCE
I'm trying to unlock my phone with hard_SPL-G4.exe but an rexx error appears "SPL_VERSION has no value"
Has someone a clue how to fix it?
Tks
IPL /SPL 2.22.0001
GSM 10.16.11
OS 2.22.17.2
same here, any solution anyone?.
yep. just started learning this stuff, and hard also told me this REXX error too
IPL 2.21.0001
spl 2.21.0001
gsm 2.7.10
os 2.21.4.1
seems like you have to run the hard_SPL-G4 tool 21 times, weird but it works for me
try this update ur rom with a official g4 rom then try to cid unlock
any solution for this error ?
Hi all,
My jasjam showing "no GSM" error after i upgrade it to shaps.4.22 & telestra & stain normal & Dvh-V-24 & Cic-13-
normal when those roms works about one year.I have (no gsm error & no protocol & no IMEI ) about one week.
I read many webpages in Xda-... & try many ways but steel have those errors.
My device os can boot(shap's 4.22 )
Model: Jasjam
ROM Before Flash:I dont know
Radio Before Flash: I dont know
Bootloader Before Flash: I dont know
Current ROM: shap's 4.22
Flashing Radio:
Current Bootloader : 2.1 olipro & can change to 1.04 With micro sd
CID : i think super cid
Radio Corrupt: Yes
No GSM Error: Yes
Stuck In Bootloader: No
Stuck On Windows Mobile Splash: NO
Can boot into OS: Yes
Tried mtty command Rtask: error comannd
Which radio/rom (rom with radio on it on NBH format only ) must I install on it.
The telstra roms that I downloaded from club-imat cant install(how van i change this roms to nbh roms ?? )
What should i do next? Thanks every body
Try installing a shipped rom, you should be able to locate it in the wiki.
Cheers...
I can help you solve in China
hii,
I bought a HTC HD2 from a friend with a broken LCD.
He walked with his HD2 in his pocket against a table and it cracked.
If you push a little on the screen you still can see allmost everything.
so here is the problem:
I try to boot it but I've got a black screen with a white triangle...
I did some research on google en tried a soft reset bij holding de up and down volume en start up the phone, it was succesfull. But the problem didn't solved.
Than I did the thing with only the volume down button and this is what i get.
a screen with 4 collors.
HX-BC
SPL - 1.42.0000 XE
MicroP (LED) 0x05
MicroP (TOUCH) 0x30
Upgrade rom code error please try again...
someone knows what to do ?
I really need some help.
Many Thanks..
What is your phone type?
HD2 with 512rom or TMobile ?
If you flash with official rom. Below are the serial numbers you may need to download the rom from official website.[I quoted from mskip]
World Wide English (WWE) - Serial: HT9AZNW00968
South East Asia (Asian WWE) - Serial:HT01XNW03437
Denmark: (DAN) - Serial: HT9B6NW00167
Norway: (NOR) - Serial: HT9C7NW01234
France: (FRA) - Serial: HT9BLNW00122
Spain: (SPA) - Serial: HT9BDNW00592
Italy: (ITA) - Serial: HT9BCNW00722
Greek: (ELL) - Serial: HT9BMNW00059
Germany: (GER) - Serial: HT9B9NW00374
Netherlands: (NLD) - Serial: HT9AVNW01232
Russian: (RUS) - Serial: HT9BCNW00012
Turkey: (TUR) - Serial: HT9CMNW05766
East Europe: (WWE_EastEurope) - Serial: HT9B3NW02204
*If you want to flash with custom rom.
Read below thread.
http://forum.xda-developers.com/showthread.php?t=609477
Go to HTC's website and download an updated ROM. You will only be allowed, with your phone's serial number, to download a ROM that is suitable for your phone.
It can't be a tmous with working spl 1.42.
It's been SD card flashed with an incorrect stock Rom whilst hspl was installed so updated the spl , removed hspl and then the flash failed.
Either find and flash the correct stock, or go straight to hspl2 and flash what you like. Usb flashing from bootloader will be fine in either case.
Well try to get the stock rom flashed...
Sent from my HTC HD2 using XDA App
Download the Stock ROM from HTC's website for the country the phone was purchased from. It should work flashing via SD Card method.
No way to flash stock rom
Hi,
I have an HTC HD2 bought in austria in sept 2010. since march 2011 i flashed to HSPL 2.08, Radiorom 2.15.50.14, MAGLDR113 and a Android NAND.
2 weeks ago i tried to upgrade to new NAND Version and my HD2 brocked. I´ve tried zu flash with stockrom by usb AND sd, but nothing worked. Tryed to flash by usb with org. HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe and get an Error 290 at 8%. After that i´ve tryed leoimg.nbh in root of SD by renaming RUU_signed.nbh form that rom.
Starting in Bootloader I read "Upgrade ROM code error Please try again" but it does not load the image from SD.
Any ideas?
thx in advanced
try using hspl 2 , 3 and 4 to remove the spl 2.08.hspl first, my first try would be hspl2 - choose 1.66.0000, and then flash the stock rom from sd card, and my second attempt if that didnt work would be hspl4 - choose 3.03.0000
hi again,
i tryed to flash with all versions of hpsl 2,3 and 4, but nothing works.
last try was hspl 2, 1.42.0000 an flashing by usb.
it was working to 100%, reboot and i get a whitescreen with htc logo.
thats all.
after 1 hour reboot, but nothig, only whitescreen with logo.
flash by sd don´t work anyway.
In that case, and especially since the failure happened at 8%, I'd say you have the stuck radio issue, (which seems to be happening a lot more than usual lately...)
Symptoms are usually spl seemingly flashing but hasn't changed when you check in bootloader, plus flashing failing at around 8 or 9%.
You may be able to flash cooked roms which don't include radio or spl, and you may be able to flash android, but may well get fatal hit errors,, it's not always the same. I suspect bad memory blocks or corrupted radio (or both, perhaps they are the same thing)