hii,
I bought a HTC HD2 from a friend with a broken LCD.
He walked with his HD2 in his pocket against a table and it cracked.
If you push a little on the screen you still can see allmost everything.
so here is the problem:
I try to boot it but I've got a black screen with a white triangle...
I did some research on google en tried a soft reset bij holding de up and down volume en start up the phone, it was succesfull. But the problem didn't solved.
Than I did the thing with only the volume down button and this is what i get.
a screen with 4 collors.
HX-BC
SPL - 1.42.0000 XE
MicroP (LED) 0x05
MicroP (TOUCH) 0x30
Upgrade rom code error please try again...
someone knows what to do ?
I really need some help.
Many Thanks..
What is your phone type?
HD2 with 512rom or TMobile ?
If you flash with official rom. Below are the serial numbers you may need to download the rom from official website.[I quoted from mskip]
World Wide English (WWE) - Serial: HT9AZNW00968
South East Asia (Asian WWE) - Serial:HT01XNW03437
Denmark: (DAN) - Serial: HT9B6NW00167
Norway: (NOR) - Serial: HT9C7NW01234
France: (FRA) - Serial: HT9BLNW00122
Spain: (SPA) - Serial: HT9BDNW00592
Italy: (ITA) - Serial: HT9BCNW00722
Greek: (ELL) - Serial: HT9BMNW00059
Germany: (GER) - Serial: HT9B9NW00374
Netherlands: (NLD) - Serial: HT9AVNW01232
Russian: (RUS) - Serial: HT9BCNW00012
Turkey: (TUR) - Serial: HT9CMNW05766
East Europe: (WWE_EastEurope) - Serial: HT9B3NW02204
*If you want to flash with custom rom.
Read below thread.
http://forum.xda-developers.com/showthread.php?t=609477
Go to HTC's website and download an updated ROM. You will only be allowed, with your phone's serial number, to download a ROM that is suitable for your phone.
It can't be a tmous with working spl 1.42.
It's been SD card flashed with an incorrect stock Rom whilst hspl was installed so updated the spl , removed hspl and then the flash failed.
Either find and flash the correct stock, or go straight to hspl2 and flash what you like. Usb flashing from bootloader will be fine in either case.
Well try to get the stock rom flashed...
Sent from my HTC HD2 using XDA App
Download the Stock ROM from HTC's website for the country the phone was purchased from. It should work flashing via SD Card method.
No way to flash stock rom
Hi,
I have an HTC HD2 bought in austria in sept 2010. since march 2011 i flashed to HSPL 2.08, Radiorom 2.15.50.14, MAGLDR113 and a Android NAND.
2 weeks ago i tried to upgrade to new NAND Version and my HD2 brocked. I´ve tried zu flash with stockrom by usb AND sd, but nothing worked. Tryed to flash by usb with org. HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe and get an Error 290 at 8%. After that i´ve tryed leoimg.nbh in root of SD by renaming RUU_signed.nbh form that rom.
Starting in Bootloader I read "Upgrade ROM code error Please try again" but it does not load the image from SD.
Any ideas?
thx in advanced
try using hspl 2 , 3 and 4 to remove the spl 2.08.hspl first, my first try would be hspl2 - choose 1.66.0000, and then flash the stock rom from sd card, and my second attempt if that didnt work would be hspl4 - choose 3.03.0000
hi again,
i tryed to flash with all versions of hpsl 2,3 and 4, but nothing works.
last try was hspl 2, 1.42.0000 an flashing by usb.
it was working to 100%, reboot and i get a whitescreen with htc logo.
thats all.
after 1 hour reboot, but nothig, only whitescreen with logo.
flash by sd don´t work anyway.
In that case, and especially since the failure happened at 8%, I'd say you have the stuck radio issue, (which seems to be happening a lot more than usual lately...)
Symptoms are usually spl seemingly flashing but hasn't changed when you check in bootloader, plus flashing failing at around 8 or 9%.
You may be able to flash cooked roms which don't include radio or spl, and you may be able to flash android, but may well get fatal hit errors,, it's not always the same. I suspect bad memory blocks or corrupted radio (or both, perhaps they are the same thing)
Related
Hi people,
I got a problem with my hd2.. I was trying to flash it, but now i think i ****ed it up!..
First of all i did the HSPL thing.. And then i was trying to flash it with the original update 1.66 flash..
My mobile was saying that it was not allowed!
Now everytime i start my phone you get the bootloader with the message:
PB81100 HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Updrade ROM code error Please try again!..
I dont know what to do right now
Please help!
and if i try a custom rom.. it says loading... all the time?
Is there someone who can help me?
Did you tray a method with SD card?
First of all you have to format a memory card to FAT32. Then put there a image of original rom. Do do so you need download stock rom from HTC and extract it. There you find a *.nbh file, the largest one. Rename it to LEOIMG.nbh and copy to your SD card.
After that put it into a phone, an enter the bootloader mode. You have to press and hold volume down key. That's all. All you need now is to follow instructions which will be displayed on screen of your phone.
yes i did.. but ill tried the original rom:
RUU_Leo_HTC_NLD_1.43.404.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
But that one is saying: Not allowed :|
you are not the first one this happened to.
look here
http://forum.xda-developers.com/showthread.php?t=618084
here
http://forum.xda-developers.com/showthread.php?t=631276
here
http://forum.xda-developers.com/showthread.php?t=631053
it looks like hspl is not installed on your device with the line SPL-1.66.0000 XE on the screen. it should read SPL-1.42.HSPL XE when it is hsplled. flash the original shipped rom again from bootloader with a goldcard or reflash the hspl
redownload your rom as it might be corruped and causing a bad flash
especially look in the firstlink i gave you.
you have tried to flash 1.66 this is a WWE or ITArom. your device is not hspl-ed so it will not accept a dutch rom. you need a goldcard to flash a dutch rom again or try to reflash a stock WWe rom.
If you are Dutch or using NLD (or equavalent)
Get the official (from htc) ROM, rename the EXTENSION to .ZIP an/or open it with Winrar.
There is a .nbh file in it, wich you need to extract to (for example) your desktop.
Rename it to LEOIMG.nbh and put it on your MicroSD (wich MUST be formateed FAT32)
Put your microSD in the phone.
Start your phone in the BOOTLOADER (keep VOLDOWN pressed and shortly press POWER .. while keeping the voldown button)
Follow the instructions on screen.
Wait till all the options say OKE, even if your phone goes running trough the room, dont click anything!
(you will see some explanation marks and reboots, this is normal).
After you should have flashed SPL 1.66 and able to boot the official ROM.
But the problem is.. All the original roms doesnt work.. They Say "00028002 Not allowed"
The ROM error is because you try to downgrade 1.66 to 1.48, wich is (i think), not allowed, and would answer my own qeustion.
have you tried the goldcard method? if there is a language restriction somewhere this will solve this
I dont understand that goldcard methode.. or.. i cant find how i can do that :$
have never needed itmyself but look here
http://forum.xda-developers.com/showthread.php?t=591239&highlight=goldcard
How can i make a goldcard without a cellphone who can start? :O
same here....
my hd2 successfully hspled... ( 4 mounths ago)
after that i try to install official 3.14.405.2 Rom...
in installing progress i see a error and after restart say: software update failed please try again
now my spl is 3.03
and task29 and hspl 1 and 2 and 3 and any orginal roms NOT installed in my htc hd2...
plz help! :-D i really really confused
tighoor said:
same here....
my hd2 successfully hspled... ( 4 mounths ago)
after that i try to install official 3.14.405.2 Rom...
in installing progress i see a error and after restart say: software update failed please try again
now my spl is 3.03
and task29 and hspl 1 and 2 and 3 and any orginal roms NOT installed in my htc hd2...
plz help! :-D i really really confused
Click to expand...
Click to collapse
You need to remove SPL 3.03!!
Only way to remove is to flash stock rom over SD!
kurt-willems said:
You need to remove SPL 3.03!!
Only way to remove is to flash stock rom over SD!
Click to expand...
Click to collapse
i tried it... but not installed from sd :-S hahaha! now i have bricked hd2. who buy it?
maybe cotulla should make a new hspl that support 3.03 . true?
Same here,flashing stock ROM from the SD Card doesnt help,the SPL 3.03 is there wont let me pass through,we need a new HSPL or else throw the Phone into the garbage can and get a NOKIA.!!
now i understand this is a problem for many users... i find 3 others users that have this problem (in iranians forum)...
My problem too!
Hi guys!
I'm sure that my friends in xda can solve this puzzle soon!
I did every thing you think.
after flashing some coocked roms (last of them was dexter the dark one) I decided to flash an original,official rom - because I heared that many problems resolved in it - and it was the 3.14.405.2 version that I found direct download link here! I extracted the .nbh file and renamed it to leoimg.nbh and coppied it into my FAT32 formatted sandisk SD 8GB class2 ram and I held voldown btn and pressed pwr to enter rainbow screen, flashing started but it froze at 10 or 15 % . after this I tested many ways from xda and other helpers but my phone showed these screens:
if I just power it on:
grey danger triangle
Software update failed.
Please try again.
and if i hold voldown and press pwr:
in rainbow screen:
RUUNBH
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
and if I try to flash any ROMs(in this case 3.14.405.2 official rom)
1)with usb cable : continues to 1% and show in pc:
ERROR [262] : UPDATE ERROR
The ROM Update Utility has encountered communications error during the update process. The program will guiade you step-bye-step to recover from the errors so you can continue with the update.
"I DID RECOVERY IT WASN'T SUITABLE"
2)with SD card : whether I use rainbow screen or just pwr on my device , it
automatically start flashing and at the start it shows Loading... and in some cases it froze at this level and in other cases it shows this error:
00028002
not allow
And now my spl is 3.03 so HSPL can't do anything!(as I tested it)
tnx for your replies!!!
excuesme because of very low quality pics!
EDITED:
I did task29 too,
my phone couldn't do task29 and it froze at the beginning of the operation
it did not any changes;
mmsoftonline said:
Hi guys!
I'm sure that my friends in xda can solve this puzzle soon!
I did every thing you think.
after flashing some coocked roms (last of them was dexter the dark one) I decided to flash an original,official rom - because I heared that many problems resolved in it - and it was the 3.14.405.2 version that I found direct download link here! I extracted the .nbh file and renamed it to leoimg.nbh and coppied it into my FAT32 formatted sandisk SD 8GB class2 ram and I held voldown btn and pressed pwr to enter rainbow screen, flashing started but it froze at 10 or 15 % . after this I tested many ways from xda and other helpers but my phone showed these screens:
if I just power it on:
grey danger triangle
Software update failed.
Please try again.
and if i hold voldown and press pwr:
in rainbow screen:
RUUNBH
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
and if I try to flash any ROMs(in this case 3.14.405.2 official rom)
1)with usb cable : continues to 1% and show in pc:
ERROR [262] : UPDATE ERROR
The ROM Update Utility has encountered communications error during the update process. The program will guiade you step-bye-step to recover from the errors so you can continue with the update.
"I DID RECOVERY IT WASN'T SUITABLE"
2)with SD card : whether I use rainbow screen or just pwr on my device , it
automatically start flashing and at the start it shows Loading... and in some cases it froze at this level and in other cases it shows this error:
00028002
not allow
And now my spl is 3.03 so HSPL can't do anything!(as I tested it)
tnx for your replies!!!
excuesme because of very low quality pics!
EDITED:
I did task29 too,
my phone couldn't do task29 and it froze at the beginning of the operation
it did not any changes;
Click to expand...
Click to collapse
exactly THE SAME THING
flashing to offical wont help either
Apologies for the new thread.
I bought a HD2 off ebay a few months ago and have a had numerious problems using it as a phone, goes from 4 bars to none every couple of mins cuts off mid call, basically doesnt work inside the house. I called HTC support & they took the serial number then told me it was a "demo" phone and unsupported, I went to the website to see if I could download a ROM update but my serial number was not accepted trying to download any of the roms.
It was running 1.66.405.2 ROM
So, using a serial number off here I downloaded the 3 roms off the HTC website and tried to install them everytime getting the "Invalid Vendor ID" error. I then installed HSPL3 then tried to install one of the 3.14 ROMS using the SD card route, it got to about 2% then rebooted with the error "Software update failed, please try again" and when i go to Bootloader it shows "SPL-3.03.0000"
Anyting I can try to get this back up? even if its just to give to the kids for playing music / videos!
Is it worth going down the goldcard route?
Regards
Paul
its just possible that you may be stuck, with goldcard the only option.
You made two mistakes.
firstly, using hspl to run a 3.14 rom leads to instability and memory problems. You cant do it that way with 3.14.
secondly, flashing the 3.14 rom from sd card was a double bad move, because 1 - its not for your device, and 2 - the fact that hspl is there lets it skip the warning initially and update the spl to 3.03.0000, which wouldn't have happened if hspl wasn't there.
You now need to find the correct stock rom for your device to downgrade spl 3.03.0000. Normally i would say find a 1.42 or 1.66 rom, (for the correct carrier if rom locked, or for HTC if not)
You didnt say which 3.14 rom you used (noob omission, lose a point ) se we cant yet rule an area out. for example, if it was the wwe htc 3.14, then we know the phone is branded (pretty likely if its a demo)
ALternative to trying every 1.66 rom you can find, is goldcard. That will allow the 3.14 rom of your choice (or indeed any stock rom) to flash no problems, hspl not required.
Yeah you learn by your mistakes!
Think I eventually got sick of the thing cutting off it was about as much use as a brick as it was! & HTC support were about as much help as hammer! Told me it was an old model & I should consider upgrading!
I've tried 1.43, 1.48, 1.66 all off the HTC website, went through all the other carriers as well entering my serial number in with no luck. The ROM i used was
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship this is what was on it before I ran the update.
Os Version - 5.2.21869 (21869.5.0.81)
Manila Version - 2.5.19211619.0
ROM V - 1.66.405.2
Rom Date - 1.11.10
Radio Version - 2.07.51.22.2
Is there anyway to find out who the carrier would be from the serial no?
only by trying to download every rom for every carrier for every region, and theyre not all on teh website,,,,
goldcard would be your best bet.
Is there any way to create a goldcard when you can only get access to the bootloader on the HD2?
The steps outilined in http://forum.xda-developers.com/showthread.php?t=642486
3:Get the SD card's Serial number & Make the Gold Card
--a: Unplug your HD from the PC and Plug it back in select ACTIVESYNC on your LEO
--b: Run PSAS, Calculators/Generators > Generate HTC GoldCard >
--c: Select LEO from the Drop-down box
--dress "Get SD Card Serial from WINCE Device"
--eSAS should see all the drives on your HTC Leo/HD2. Make certain the correct size disk is sellected. For example, I inserted a 512MB SD card so - Beneath the (CID) box you should see something like " Disk Nr.: 04 - Disksize 512 MB"
--f: Now that the correct disk is selected, press "Save Goldcard Image to WINCE SD"
--e: you should see "Done writing SD Card to WINCE Device.
I get the error message "could not open connection, device connected?"
When I turn on the phone all I get is the bootloader menu page!
Resolved
Ok its now sorted,
I bought PSAS and made a goldcard using my old HTC touch. I then installed the 1.66 rom before updating to 3.14
I still have the same phone reception problem, would it be worth trying a different radio to see if that would fix the reception problems?
Thanks for all the help and advice.
Paul
you can't change the radio when running 3.x, because there is no hspl to allow it, sspl can't flash radios and goldcard is for stock roms.
So I'd need to goldcard it back to 1.66 or such then try a few radio roms to see if it will fix the reception problems? Whats the chances a new radio would resolve it?
Hello,
I have a big problem with my german HTC Mozart ( T-Mobile version ).
2 weeks ago I flashed a RUU Rom to unbrand my mobile.
With this Software version my mobile is still branded and don´t work correct.
I would write more about the problems whith my mobile and this firmware, but my English is to bad….
After that I can´t flash any other Rom.
I tested to Install many other Roms, but the RUU installer every time says “Wrong Model ID”.
Then I looked my Phone Informations and see:
OS Version: 7.0.7004.0
Firmware revision number:2250.09.12803.111
Hardware revision number: NA
radio software version: 5.52.09.16_22.33a50.10U
radio hardware version: 0.0.0.0
Bootloader Version: 1.28.2250.3(113810)
Chip-SOC: 2.2.5.0
With the Rom, I flashed should be something wrong…
The Information on my Boot Mode Screen ( Rainbow) should be wrong, too
MOZA100 SS-BC (4K)
SPL-1.28.2250.3(113810)
MicroP (LED) 0x07
Touch C1(v69)
SD SANDISK 15193MB Class0
Partition Info-v211v413
In a german forum I found the same problem , but there are no solution.
Also I tested, to flash with a Goldcard.
I read all instructions to create a Goldcard an how to use it in this forum.
I think my created Goldcards are all OK but the USB HOST Screen every time says:
1. Loading
2. Checking…
3. And 3 second Later Serial on the bottom of the Display, but nothing else is happens..
Any Ideas?
so you have this problem for two weeks now?
what rom did you flash?
check the mozart forums:
http://forum.xda-developers.com/forumdisplay.php?f=779
and maybe this will help you:
http://forum.xda-developers.com/showpost.php?p=12120618&postcount=6
Yes, i have this problen for 2 weeks now.
It was a unbranded T-Mobile 1.28 rom.
Thanks, i have found someone else, with the same Problem, but no Answers.
see here
I have my Goldcards created with Ubuntu and Windows... Ubunto to find the CID and Windows, to create it...
And it seems to work, because the mobile is loading and checking the rom of the goldcard, but 3 seconds after checking... is the serial messeage in the bottom of the display and checking.. on the top, but nothing happens...
I had the same problem with my HTC 7 Trophy, flashing a new ROM did not work, and it changed the Model ID of the Phone. Once that has happened there is no way to flash a different ROM.
I tried various tools to try and get the Model ID changed back, if you use MTTY you can read the Model ID, but I don't think you can change it with that tool.
In the end I had to send mine to back to HTC to get the mainboard replaced.
hm sounds very bad..
but i think i saw the awnser somewhere...
try checking other wp7 devices forums,
hd2 people are very active..
hd7 people too...
somewhere ive read about some "force rom download mode" by pressing camera button on boot too, dont know if there was truth in it...
you say you had the t mobile 1.28 installed or you did try to install it?
it is not "unbranded" if its from tmobile (or do i get the term unbranded wrong?)
i belive there are 3 different t-mobile roms: TMO-DE, TMO-CZ, TMO-AT
these are all branded roms,
if you want unbranded you get: HTC-EU or HTC-Generic
ive used this method to unbrand my mozart from tmode 1.25 to tmode 109 to HTCEU 1.28
if you come from TMODE (as a german you should) you may want to try the 109 rom (works without goldcard)
so that i understand right, you can use the OS but you cannot make calls because of the cooked radio?
Hi, I have a German rom 1.28 installed, because i only can choose German or English language, but I do not remember which version it was. I think I previously had to install a 1.09.
However, there is something not been in order.
I think that the "force download mode" for this time is just for Zune, but I try to search for more information.
If I could flash any firmware I would do, but there is the problem with my "Model ID".
I think, the goldcard method is the right way, but it don´t works.
To eliminate errors about my hardware ( selfmade y-cable and hama 19in1 usb-cardreader ) I have ordered a delock y cable and a single usb-sd reader to try it on weekend again, but I think, the hardware is not my problem.
But i can test it not before weekend, because I´m a truck driver and only on the weekend at home.
Phone calls can I do with this firmware.
My display is out, if I choose a phone number. This time I only can hang up with the headset or by take out the battery
It works again until the other person accepts the call or the mobile hangs up automatically after 8 or 10 rings.
The volume of the headset ( earphones and micro), with this firmware is to quiet, too.
There are many problems….
somebody else with 1.28 and problems?
you dont need goldcard to flash back to stock rom
you should be able to flash any stock tmode rom without goldcard.
try to flash 109 without goldcard.
I´ve tried to install the
“RUU_Mozart_TMO_DE_1.09.001.16_5.50.09.15_22.23.50U_Signed_by_ansar”,
but after 1% my mobile reboots and the RUU Installer says:
244 wrong “MODEL ID”
are you sure it is a german Mozart?
this rom you flashed is made for unbranding.
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=817691
just saying....
that suxx have you tried this?
Zetabit said:
Problem Solved!
Here are the steps I took to resolve the issue I was having, with the Mozart stuck at bootloader, "Enter USB Host...".
First I formatted the SD-card, then used my brothers Android phone with ASTRO File Manager to extract the CID code from the SD card.
1. Insert the SD card into the Android phone
2. Start the ASTRO File Manager
3. Navigate to sys/class/mmc_host/mmc1/mmc1:aaaa (instead of aaaa there could be something else as well)
4. Long press on the 'cid'-file
5. First select Open as, then Text
6. Then select File-Editor
7. Write down the number 1 to 1 onto your PC/Mac
Once I had the CID code, I used http://psas.revskills.de/?q=goldcard to generate & email me the goldcard image file.
I formatted the SD card at this point, FAT32, 4096 sector size.
I then used HxD Hex Editor and Disk Editor to copy the goldcard.img into the first sector the SD card.
Heres how:
1. Run HxD as Adminstrator
2. Open the SD card by going to Extras > Open Disk > Physical Disks (important) > Removable Drive. Make sure Open as Read only is unchecked.
3. Open the goldcard.img by going to Extras > Open Disk Image.
4. From the goldcard.img, Select All and Copy all bytes.
5. Paste into the first 384 bytes of the SD card - offset(h) 0x0 - 0x170.
Next I copied a European ROM on the the SD card (in explorer as you would with any file) and rename it to MOZAIMG.nbh
With the Y-cable I booted the phone and to my disbelief it started and successfully reflashed the phone.
http://www.youtube.com/watch?v=0t_xNdf9DeQ&feature=player_embedded
Hope this helps!
Click to expand...
Click to collapse
there has to be a way to fix it.. or maybe not
the other guy said he got his mainboard changed, maybe you broke it.. damn...
@pik.
I have tested to flash the "RUU_Mozart_TMO_DE_1.25.111.05_5.50.09.18_22.24.50_RELEASE", but after 1% the same problem "Invalid Model ID"
@webwalk®
I have created the gold card according to these instructions.
I have no Android phone, so I have the part to find out the cid solved with an Ubuntu Live CD and my built-in Cardreader.
The goldcard seems to work, since it goes from loading in checking..., then it is always the same on serial
Edit: Yes, I´m sure, that it is a German HTC Mozart.
i've the same problem with 1.28
can someone help us?
i have the same question
my hardware version is also NA
dsmps said:
Hello,
I have a big problem with my german HTC Mozart ( T-Mobile version ).
2 weeks ago I flashed a RUU Rom to unbrand my mobile.
With this Software version my mobile is still branded and don´t work correct.
I would write more about the problems whith my mobile and this firmware, but my English is to bad….
After that I can´t flash any other Rom.
I tested to Install many other Roms, but the RUU installer every time says “Wrong Model ID”.
Then I looked my Phone Informations and see:
OS Version: 7.0.7004.0
Firmware revision number:2250.09.12803.111
Hardware revision number: NA
radio software version: 5.52.09.16_22.33a50.10U
radio hardware version: 0.0.0.0
Bootloader Version: 1.28.2250.3(113810)
Chip-SOC: 2.2.5.0
With the Rom, I flashed should be something wrong…
The Information on my Boot Mode Screen ( Rainbow) should be wrong, too
MOZA100 SS-BC (4K)
SPL-1.28.2250.3(113810)
MicroP (LED) 0x07
Touch C1(v69)
SD SANDISK 15193MB Class0
Partition Info-v211v413
In a german forum I found the same problem , but there are no solution.
Also I tested, to flash with a Goldcard.
I read all instructions to create a Goldcard an how to use it in this forum.
I think my created Goldcards are all OK but the USB HOST Screen every time says:
1. Loading
2. Checking…
3. And 3 second Later Serial on the bottom of the Display, but nothing else is happens..
Any Ideas?
Click to expand...
Click to collapse
i also have this problem,somebody say that use the "JTAG"can fix it.
does anybodu solve this problem on mozart?
regards
please help if you can i cant flash any rom and i want to go to dft
please help i cant flash anything please any solution
my problem is very similar to yours. i have tmob de mozart too and this vender id error after flashing an official europe rom....
i ordered goldcard tools from amazon but they arent here maybe in three days. but i think it would be the same problem as yours.
->
i had at first the dynamics7 1.00 mango rom installed on my htc mozart.
after that i made rspl to 1.28.
after that i tried to install RUU_Mozart_S_HTC_Europe_5.12.401.02_5.71.09.02a_22 .51.50_RELEASE. the flashing started. than the phone restartet and installed spl 5.12 but the flashing doesent went to finish because of vendor id error.
now i cannot flash any stock tmob de or htc europe rom because of vendor id error. (clear because of spl 5.12) but the slspl rom doesent work, too. every flashing stops at 1%....
PD 67100 SS-BC (4K)
SPL-5.12.2250.2 ( 135167) MNG
os 7.10.8107.79
firmware 2250.21.51301.401
hardware 0004
radio 5.71.09.02a_22.51.50.21U
radiohardware A.102.0.D4
bootloader 5.12.2250.2 (135167)
any solution for me? is it maybe possible to send lower spl via cabsender?
Don't use wrong ver
aggelosss5 said:
please help if you can i cant flash any rom and i want to go to dft
Click to expand...
Click to collapse
Be carefull with DFT i halfbricked my bootloader, now I cant flash any rom, can't use the phone.
I am looking for new method maybe JTAG is the only way out of this.
Thank if helpful:good:
Hello!
My phone isn't working with windows mobile although the windows phone 7 and the android works good with my hd2.
The error is this:
MicropERROR:
Microp Version Mismatch
0x0
Please update lateset Microp
firmware
How can i fix it?
Run Hspl4 choose 3.03.0000
Get the correct 3.14 rom for your phone (example, a German o2 phone needs the German o2 rom, not just any rom)
Flash it from USB, if USB flash fails try it from SD. (Can go straight for SD if ya like, I just say USB first since its quicker and you already set the spl with Hspl4 in step 1, so no benefit from SD)
samsamuel said:
Run Hspl4 choose 3.03.0000
Get the correct 3.14 rom for your phone (example, a German o2 phone needs the German o2 rom, not just any rom)
Flash it from USB, if USB flash fails try it from SD. (Can go straight for SD if ya like, I just say USB first since its quicker and you already set the spl with Hspl4 in step 1, so no benefit from SD)
Click to expand...
Click to collapse
It didn't worked... but thanks for helping
up
Sounds unusual...
try another original wm rom or a custom rom & recommended spl hspl for the rom & see if works ...
Have you tried task29 or flashing via usb with no SD card loaded ...
White screen
Hy! Thanks for read this threat.
I got an hd2. Its software was broken and it cant boot up, just an white screen and happen nothing. I don't know which software was installed to it.
I want to install new ROM this one: RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
i put on bootlader mode the phone i plug the USB cabel and run the software (as administrator) it start setup and after 1% i get error massage ( error 270 ).
I tried to use task29 white this rom: RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
but it stuck 0%.
If you have any tip pls share me! Thanks!
jagyugyaerik said:
Hy! Thanks for read this threat.
I got an hd2. Its software was broken and it cant boot up, just an white screen and happen nothing. I don't know which software was installed to it.
I want to install new ROM this one: RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
i put on bootlader mode the phone i plug the USB cabel and run the software (as administrator) it start setup and after 1% i get error massage ( error 270 ).
I tried to use task29 white this rom: RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
but it stuck 0%.
If you have any tip pls share me! Thanks!
Click to expand...
Click to collapse
What model TMOUS US or EU ?
If T-Mobile US (TMOUS) then it would be bricked by that ROM with 51 version Radio.
Hopefully it EU model & just an issue with SPL version !
Mister B said:
What model TMOUS US or EU ?
If T-Mobile US (TMOUS) then it would be bricked by that ROM with 51 version Radio.
Hopefully it EU model & just an issue with SPL version !
Click to expand...
Click to collapse
I dont know exactly, i guess it is unlocked. Thats why i dont know, where can i check it?
TMOUS US is easily identified by T-Mobile logo & green/red call/end keys ...
white screen
It has call keys, but its color are grey, but it dont have T-mobile logo
I had succesfully install a OS (Duttys_Leo_Sense_2.5_5.2.21907.5.0.93_1.80_ML_V4_Ship_PT) from SD card. But still happen the same, after i start the phone it has constant white screen.
Hi xda-community,
I am new to the Smartphone- and the Windows Phone world. My main cause is to get rid of the swisscom branding of my HTC Radar. But I also would really like to test some custom ROMs - especially the Dynamics HD2O looks promising in my mind. That's why I bought all the equipment necessary for Goldcard method for 2nd Gen WP7 phones as in this manual.
My Info:
HTC Radar C110e
Model ID: PI06100
SPL – 1.8. 160015.3 (131745)
Radio-16.23.06.10
Radio Software version: 16.23.06.10_ 16.32.00.23U
FW-Rev: 1600.2200.10801.166
What I did so far:
downloaded IMG_Omega_HTC_Europe_2.05.401.01_Radio_Signed_16.23.06.10_16.32.00.23_OMEGA_RELEASE.nbh
renamed it to OMEGIMG.nbh
put it on microSD-Card
used goldcard-tool and made Goldcard of microSD card
put goldcard on one end of Y-Cable, Radar on thick end, and red end in USB port of PC, which put Radar to light
entered USB Host Mode by pressing vol down + camera (now it shows "Update in Progress" and reboots about 10 times every 10 (?) seconds...then this appears:
OMEGIMG.nbh - FAIL
RADIO - Fail
BOOTLOADER -
RCUST -
OS -
>*>*>*>*>*
Update Terminate
UPDATE FAIL
Error code: 33
I tried it a dozen of times and only once it showed me "Update Complete - Update Success". The next time I rebooted the device it showed an "SPL 2.5 MFG" but only once. After another reboot it was back to 1.8 again
But I think the Radio version was upgraded by this "success", since it was 16.23.02.09_2_ 16.24.00.23U when I bought this smartphone.
However, I am lost at this point. In the DFT-manual linked above the basic stuff to know doesn't contain "RUU". I downloaded the ROMUpdateUtility from the manual but when I try, there's always this Error 294- invalid vender ID.
I tried several times to upgrade spl_2.6.160015.3_WWE.exe, but it'S stuck at 0% and then I get the connection Error 262.
Also I might add, that the Radar isn't anymore in the Control Panel but only the HTC USB Sync-Driver (?)
I am afraid to update via Zune, because I read, if the SPL is too high, I couldn't downgrade again to HSPL. However, I never installed Zune. Is this still available? What should I do?
Edit: it worked
after GOldcard, the device restartet b itself and I missed that to enter SPL mode (instead it rebooted to USB HOst Mode by itself and startet the goldcard-method from beginning). By entering SPL mode I stopped the loop of goldcarding and after my SPL was 2.5 after first goldcarding, I was able to HSPL'ing the device
SGE2010 said:
Hi xda-community,
I am new to the Smartphone- and the Windows Phone world. My main cause is to get rid of the swisscom branding of my HTC Radar. But I also would really like to test some custom ROMs - especially the Dynamics HD2O looks promising in my mind. That's why I bought all the equipment necessary for Goldcard method for 2nd Gen WP7 phones as in this manual.
My Info:
HTC Radar C110e
Model ID: PI06100
SPL – 1.8. 160015.3 (131745)
Radio-16.23.06.10
Radio Software version: 16.23.06.10_ 16.32.00.23U
FW-Rev: 1600.2200.10801.166
Edit: it worked
after GOldcard, the device restartet b itself and I missed that to enter SPL mode (instead it rebooted to USB HOst Mode by itself and startet the goldcard-method from beginning). By entering SPL mode I stopped the loop of goldcarding and after my SPL was 2.5 after first goldcarding, I was able to HSPL'ing the device
Click to expand...
Click to collapse
Hi,
I use this ROM and it is very good one. But if you put HSPL already now you should put new radio RUU_Radar_Radio_17.5006.08.27 otherwise it will not work. Read the instructions in the tread. http://forum.xda-developers.com/showthread.php?t=1685271 in the tread there is link for downloading this radio. For me it was easy to HSPL the phone because I am not receive Country error and I don't need to use gold card just RUU.