Hi, my HD2 has just been returned from repairs because I broke the screen. Now I wanted to remove the new T-mobile ROM which they put on the phone.
I installed HSPL 2.08, the original HSPL on it was 1.66.
1. I tried to flash the official HTC Europe ROM but it failed.
2. Downloaded the official T-Mobile UK ROM to flash but it's failed. Flash write error, please check PDA
Now it is stuck in bootloader with the message
"Upgrade ROM code error Please try again".
When I try to flash the T-Mobile ROM, it stops at 13%
Please help me, how do I solve this?
Running Windows 7
Thanks
to me happen the same
what is the solution?
Related
I restored the stock vodafone rom and then flashed the stock spl now when i turn the phone on i get the spl screen and it say
upgrade rom code error
then i get a grey screen that says Loading... nothing more
lohap said:
I restored the stock vodafone rom and then flashed the stock spl now when i turn the phone on i get the spl screen and it say
upgrade rom code error
then i get a grey screen that says Loading... nothing more
Click to expand...
Click to collapse
How did you flash the original SPL?
As far as I know there is no JumpSPL or SoftSPL for Raphael yet? Or am I wrong?
[EDIT] Sorry, I've seen how it's possible in the Wiki.
Per the instructions at
http://forum.xda-developers.com/showthread.php?t=410150
now it seems to boot the stock spl but with that error
windows doesnt even detect it i think
woop got windows to detect it
problem is i cant flash the hardspl, spl and if i try to flash a stock firmware i get vendor id error, anyone got a full dump of the vodaone uk firmware
Could not you flash the ROM from memory card (when you find any)?
crocodile010 said:
Could not you flash the ROM from memory card (when you find any)?
Click to expand...
Click to collapse
problem is i cant flash the hardspl..........so 1 and 1 is 2,he cannot do that
have u tried getting in touch with olipro or cmonex? or with any members of the elite team? my guess is they are the ones with most technical knowledge of the device so ask one of them help.
ofcourse always be nice and polite and patient as those guys have their plates full
thanks ill send them a pm and see if i need to buy a new device.
hi been told i can fix this with mtty and one got a link to a download and do i need to do anything to the raphel to get it into serial mode
Hi
My HD2 is original unmofidied one. Has stock ROM and I didn't install anything on it yet. I went to update the ROM version to 1.66 from the link posted on the first thread on this forum.
My phone is HD2 with these versions:
ROM 1.48.707.2 (71294) WWE
ROM date 11/09/09
Radio version 2.05.51.05_2
Protocol version 15.28.50.07U
Tried to run the file RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Program starts working, changes the display on my HD2 to the reb/blue/green HTC preboot screen and then displays the gauge. Going into about 2% of the process of updating the ROM I get the following error message:
ERROR [294] : INVALID VENDER ID
This Update Utility cannot be used for your PDA Phone. Please check your Update Utility.
Why is that? I thought that ROM above is stock rom unmofidied and that should flash just fine without any tweakings at all on my HD2. I don't want to mess around with my HD2, just wanted to update the ROM.
hi
you must apply HSPL before upgrading your rom ,the subject have been treated in another topic .
every hd2 is cid locked... so you can only install rom that you download from htc website using your serial number.
however you can use
1. goldcard method http://forum.xda-developers.com/showthread.php?t=572683 to flash any original rom regardless of language/region
2. use uspl , http://forum.xda-developers.com/showthread.php?t=606713
it flashes any ROM using the original SPL to your device (no warranty void)
3. use hspl http://forum.xda-developers.com/showthread.php?t=611433
you can also return to your original spl if you need it for warranty , everything is explained in that threead
This is my first thread so I hope Im not double posting with my question. I am trying to get my HD2 back to stock, I have downloaded the official t-mobile rom from htc. Whenever I try to flash ROM from sd card or any radio it gets stuck at 96% or 99%. I have tried hspl 2.08 and if I do 2.08.0000 nothing will flash at all. I am at my wits end because I have tried every suggestion and have searched high and low through the threads. Any help is appreciated.
Hey! If you installed some other roms (wm, wp or android) you need program task 29!
It will clean your flash memory. After that you need to know what was the original spl on your phone (like 2.08.0000 or 3.05.0000) SPL, not HSPL! Flash your stock SPL! reboot, enter in bootloader again and connect phone in to pc, flash your stock rom while you in bootloader through pc! It works for me 100% Enjoy)
Hello i have htc hd2 i was upgraded to android, now I tried to downgrade to standart wm 6.5 and i get error on red green blue screen upgrade rom code error please try again. what i need to do now? i bought phone from O2-ireland. thanks
upgrade rom code error = you used the wrong stock rom.
either..
1 - find the correct stock rom (o2 ireland, for example)
or
2 - dont use sd card flashing, because when you did, it removed hspl, and so teh flash failed, because the stock rom was wrong.
so, example, say you want to flash the wwe 3.14 rom,, use hspl4 to set 3.03.hspl and then flash the 3.14 rom from usb.
or example 2, , say you want to flash a 1.66 rom, use hspl2 to set 1.66.hspl, then flash the rom from usb.
Hi All,
I m trying to go back from android to winmobile and my device is stuck...
In bootloader (3 colors) i have the following error: "upgrade rom code error please try again"
I have tried to flash different winmobile roms include RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship and i have tried to flash HAED SPL 4 and i received error in device id...
In bootloader it appears correctly with SPL-2.08.HSPL 8G XE, and in the white eare it write Serial in in the begining and when I try to flash it change to USB.
The main problem is that I have tried to flash Energy.Leo.21916.Sense2.5.Jul.04 above android it stuck on 4% and I can't reflash anymore, when i try to reflash it stuck on 0% no matter what I do.
In bootloader (3 colors) i have the following error: "upgrade rom code error please try again"
Please advice...
sagytb said:
I have tried to flash different winmobile roms include RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_
Click to expand...
Click to collapse
do you have a tmous hd2? because if you do you are VERY lucky not to have bricked it, , the tmous CANNOT just take any old stock rom, it MUST be a tmous stock rom, and that one listed above isn't.
go get the real tmous rom, try to flasj it over usb with the phone in bootloader, , if it fails, extract ruu_signed and flash it from sd card (4gb sd card or smaller, , bigger wont work)
If you get any errors (especially the blue writing on white when you sd card flash, , example ''radio fail'') let us know.
I have european device no Tmobile device.
Is there any hope?
Well rom update error usually means you tired to flash the wrong rom over SD card whilst hspl is installed, however since you say it still says 2.08.hspl then its not that,
(incidentally, that's not a correct spl,,,2.x are tmous spls, they'll work on the reg HD2,and are required for magldr Android etc, but they can cause issues going back to stock, nothing critical, but can annoy )
I personally think you have a stuck radio,, confirm this by flashing the correct rom from SD.
By correct rom, i mean if the phone is originally a german o2 phone, flash the german o2 rom, if it was bought rom unlocked (this has nothing to do with the network lock), from for example carphone warehouse, in the uk, then use the wwe rom, for uk voda, use the uk voda rom, only the correct rom will flash from sd card.
#take note of what it says, blue writing on white background, during the flash.
first, thanks for your help, i manage to flash wwe roms, but when i try to flash hard spl, it stuck again, in the phone, in bootloader menu (3 colors) i see usb mode and it doesn't continue to flashing mode (black screen) and it stuck on the SPL execution as well, some times i receive unknown errors.
I have tried to flash from sd card several wwe roms (i have no idea what was the original) and the problem is the same.
Any solution ?
Can i flash hard spl from sd card?
sagytb said:
Can i flash hard spl from sd card?
Click to expand...
Click to collapse
no, you can't.