No Wifi - TG01 General

Hi,
I've bought a TG01 on Ebay.
Unfortunately, I have now determined that the wifi works.
I can turn it on, but there is simply no net!
I have already tried different roms, but unfortunately without success ... (have a second TG01 and there everything works without probs).
How expensive is it about if I send in the phone?
MFG
Black Hawk

Hi,
wenn Du es bei ebay gekauft hast...Verkäufer nach der Originalrechnung fragen...das TG hat sicherlich noch Garantie. Wenn der Verkäufer sich sperrig zeigt, versuchen über ebay vom Kauf zurück zu treten, da arglistig verschwiegener mangel oder so...
Viel Erfolg.
Hi,
if you bought it on ebay, just ask the seller for his original receipt, because it will shurely be still under warranty. If the seller doesn´t cooperate, try to give it back (with the help of ebay maybe) because he didn´t mention the WiFi-Problem.
Good luck

Related

Soon new qtek rom!!!

I sent an angry email to brightpoint here in sweden how distribute the qtek products in sweden.
I asked them why the f**k they didn´t release the 1.6 rom
and this is the answer
for those how await the new rom www.qtek.se(in swedish)
Hej Jonathan,
Vi kommer inte att släppa ROM 1.60.00WWE med tillhörande radio mjukvara. Då det redan finns en senare mjukvara kommer vi inte att släppa denna, inom kort kommer ROM 1.66.00WWE att finnas tillgänglig.
Med vänlig hälsning
Fredrik
Click to expand...
Click to collapse
Maybe 2003 se or maybe not definately a brand new rom version coming soon.
P.S the last sentence of his mail reads "Wery soon there will be an 1.66.00WWE ROM availeble."
sorry for my bad spelling
i can't spell!
Jonathan
It's about time! They are very slow!
my qtek2020 which is about a month old came with that rom
and it's not SE (after reading this i may not want SE at all on my xda2 http://www.brighthand.com/article/Developers_Dealing_with_Windows_Mobile_SE?site=PPC since the ability to rotate the screen without a softreset at the cost of loosing the ability to run tons of older windows CE applications)
the 1.60.00WWE is ok apart from
2 times within 1 week where my qtek2020 died
and would not turn on and softreset dident do anything
so i had to do a hardreset to get my qtek2020 back into the land of the living
not sure if it's the rom itself or the new radiostack though
if it happens again i will try to remove the sim to see if it's a gsm
related issue
Until now i found that the mda2 tmobile 1.60.36 WWE is the best Rom around...what do you think? but i hope this qtek will be worth installing.
it is apart from the issues that i have with it
but of cause those could be related to some 3th party software i have put on
or even a hardware defect
Looking forward to it, getting tired of instability problems.
(Ser fram emot den, är trött på instabillitetsproblem)
Looking forward to it, getting tired of instability problems.
Click to expand...
Click to collapse
with 1.66.00WWE i have don 6 hardresets these last 2 weeks
because it refuse to turn itself on
and sortreset dont do anything to wake it
i've tried to take out the sim and to charge the xda
but when it's dead like that i will not charge
so if these issues are rom related which i suppose they are
i would have to have pretty much instalility before i would move to this
rom on purpos

Orange M1000 update RUU166150WWE_Orange_DK.exe released

I am downloading this update for Danish M1000 units at the moment. Size is 27 MB.
The file is found at:
http://static.orange.dk/spv/RUU166150WWE_Orange_DK.exe
Regards
Michael
What kind of Ext. Rom stuff comes with it? (I mean please tell us after you have had a chance to take a look yourself -- :? )
I would be very interested in knowing, as the Imate version is basically naked with nothing really there of value (to me).
Det er lige meget hvilke sproeg det er....
(don't care about it being in Danish)
I am installing now.
On the first attempt, it failed after starting the erase process.
I did a reset as suggested and restarted the update.
This time I had a moving progress bar, the erase completed with no incidents and I am now at 11% during the write phase.
I will report on the contents once installed. Hopefully tonight. Then awaits a very long list of software, I won't restore any back-ups except my SMS database.
Where in the US are you based, I been there many times (NYC, Raleigh, NC, Florida (Miami, Boca Raton, Ft. Pierce and Orland) and my favorite, Austin, Texas.
I work for a decent size IT company who has granted me many trips there, last time 6 weeks writing a technical book in Raleigh. I miss the US..
Regards
Michael
I am in the Seattle area.... moved here from Vedbaek almost a year ago after being there 8 years. ((Jeg er gift med en dansker))
I was going to take a peek into the file to view the Ext. ROM, but my "file peeker" program is at home.
Not gonna blindly install it "just for fun" as that would be like playing Russian Roulette just for fun.
I passed Seattle in January, having a stop on the way to Las Vegas. Cold and misty at the time.
It is writing the Extended ROM as we speek.
Did you work at a government building in Vedbaek ?
OK, done.
Only the MMS Composer (new) 1.6.0.12 appear new, there were no MMS composer in the previous image.
I have forgot how to make the extended ROM visible, will create a list of the contents once I find the solution unless someone beats me.
I had to do a hard reset (per instruction) after the update. The system then hung at boot time. A soft reset solved that, apps were installed and the system restarted for the usual setup.
I have not, so far, noticed anything new.
Need to re-enter my GPRS settings etc, I guess I will not get much work done tomorrow..
See ya
Regards
Michael
Nah...
I worked for another company.
soerg efter i Krak -- Frydenlunds Alle 6 i 2950 post omraade
Jeg vil helst ikke sige det her i forum, naar du kommer til at regne det ud....hvis den ikke er allerede for sent nu.
Lad os bare sige at jeg arbejder for mine rige onkel william nu, men ikke foer vi blev spist af ham.
Is the Orange DK ROM in Danish or English (the file name implies English with the WWE naming scheme)?
Orange Extended ROM
Could you post the extended ROM files for me to download, please. I don't want to upgrade all but part of its extended ROM.
Thank you.
the usual stuff
AutoRun.exe
Config.txt
TPDisable.exe
TPEnable.exe
Broadcast_WWE.sa.CAB
CallerIDRC11_WWE_1.5.sa.CAB
CameraRC132_WWE_1.5.sa.CAB
ClearVue233_WWE.sa.CAB
MIDI56.sa.CAB
MMS16012_WWE.sa.CAB
Version_AKU1_16600.sa.CAB
and these orange specific things:
DIM.CAB
%CE1%\Tools\CESetup.dll
Windows\CheckFile.exe
Windows\Platformxxx.reg
Windows\Customize.lst
Windows\_movefilelist.txt
Temp\_DIM.exe
DM.CAB
%CE1%\Tools\CESetup.dll
Windows\CheckFile.exe
Windows\Platformxxx.reg
Windows\Customize.lst
Windows\CM_Entries.xml
Windows\Grass.tsk
Windows\Start Menu\Orange Update.lnk
Windows\Start Menu\Orange Backup.lnk
Windows\Favorites\Vi anbefaler.url
Windows\Favorites\Nyheder.url
Windows\Favorites\Sjov.url
Windows\Favorites\Spil.url
Windows\Favorites\Orange World.url
%CE1%\Action Engine\Action Backup\Launch_orangeuk_AEbackup.exe
%CE1%\Action Engine\Action Backup\AEBackup.exe
%CE1%\Action Engine\Action Backup\AEB_orangeuk_en.dll
%CE1%\Action Engine\Action Lock\SMSSend.exe
%CE1%\Action Engine\Action Lock\RemoteNotify.exe
%CE1%\Action Engine\Action Lock\AELock.exe
%CE1%\Action Engine\Action Lock\AEL_orangeuk_en.dll
%CE1%\Action Engine\Action Update\Launch_OrangeUK_AEUpdate.exe
%CE1%\Action Engine\Action Update\AEUpdate.exe
%CE1%\Action Engine\Action Update\AEU_orangeuk_en.dll
%CE1%\Action Engine\AECommon\AERASManager12.dll
%CE1%\Action Engine\AECommon\AECommon20.dll
%CE1%\Action Engine\AEResource\AEResource.exe
%CE1%\Action Engine\AEResource\AER_en.dll
%CE11%\Orange Update.lnk
%CE11%\Orange Backup.lnk
%CE4%\RemoteNotify.lnk
%CE4%\Orange Support.lnk
%CE17%\Orange Update.lnk
%CE17%\Orange Backup.lnk
homepage_DM.CAB
%CE1%\Tools\CESetup.dll
Windows\CheckFile.exe
Windows\Platformxxx.reg
Windows\Customize.lst
Windows\ow_logo.gif
Windows\dividing_line.gif
Windows\arrow.gif
Windows\_MoveFileList.txt
Temp\_default.htm
OrangeDK_AP_20040315.sa.CAB
%CE1%\Tools\CESetup.dll
Windows\CheckFile.exe
Windows\Platformxxx.reg
Windows\Customize.lst
Could you provide me the MMS16012_WWE.sa.CAB.
Thank you for your prompt reply.
Anyone know of a suitable version of the M1000 ROM that I could use to flash my UK based O2 XDA2, as I use my Orange SIM with it, and can't help but wonder if flashing it with an Orange ROM image might not be a better idea?
Would this work ok?
Any ideas?
here are the files from the rom
Forgive my sheer lack of knowledge, but can I just install the extended ROM items, on a UK O2 ROM XDA2?
I'm still looking for a way to get an Orange ROM onto an O2 XDA2...
Anyone noticed increased battery power consumption with this upgrade ?
I have a strong feeling that - under certain, but undetermined circumstances, the battery is drained much faster than previously.
One 8 hour night with MSN Messenger loaded only drained about 20%, but during the day the device went from 80 to 29%, and I did not use it that much.
I also had a period where turning the device off had a delay between the key press and screen blank of about 20 seconds. This lasted for some time, right now it happens immediately. This might be related to areas with poor or no signal.
I only used the new ROM for about 24 Hours, but have a feeling it is a bit less stable than the previous.
Only positive thing I noticed is that MSN Messenger now always signs on in the first attempt, prevously it always failed on the first attempt and usualy succeded on the second.
Regards
Michael
Regards
Michael
Is is this the best Orange Rom currently around?
Or is there a 1.72 around?
I currently have a 1.52... is there any better Orange UK rom currently around?
Thanks,
Chris

Upgrading without bracket

Hi all,
I got a little problem. Ik want to upgrade my MDAII to wm2003se. The problem is that the connector in my MDAII is broken, so I connect it to my PC with BT. Is there a way to upgrade it without using the bracket ?
thanx
Niels

SDHC in Hurricane

Hello,
I'm new here and I wanna get my 8GB SDHC card working in my SDA II.
I already tired several ROMs and several SDHC drivers for the Hurricane, f. e. hxxp://forum.xda-developers.com/showthread.php?t=351586 or hxxp://forum.xda-developers.com/showthread.php?t=344338 , but at anyway none did work after all
So I have a SDA II with inside a microSD 8GB Kensington with miniSD Adapter and atm hxxp://forum.xda-developers.com/showthread.php?t=475286 that ROM (WM 6.1) patched with some SDHC drivers but my SDHC card is not recognised by the phone...
Anyone got an idea?
Thanks in advance
Keyno(t)
Ouw and btw: is there any ROM for this phone with WM5 or WM6.5 in English? I only found the 6.5 Chinese version... or how to change it to English?
I doubt you will find anything for SDHC on this device. Only for Tornado - after a long wait - someone found out that OMAP850 drivers for the Startrk could also be used for the Tornado.
I don't know how the Startrk drivers were created, but for sure there are HTC devices using OMAP 850 which have SDHC support on WM6. So it was sure that the Tornado can support it as well from HW point of view.
If you do not want to create a low level driver for OMAP 750 yourself, you could invest in finding a device with OMAP 750 (like the Hurricane uses) that has WM6 and SDHC support. It is however not likely you find one :-(
If you like your Hurricane - don't worry. You can replace the PBA inside the Hurricane with a Tornado PBA without any other change to the device. They are 1:1 compatible (mechanically: identical size in any regard and electrically: LCD, keyboard, Camera).
So if you find a broken Tornado (no matter how worn or cracked) where the PBA is still alive - get it and give it a new live in your housing of the Hurricane.
Hey tobbbie!
Thanks very much for your reply! Und ach ja, ich bin auch Deutscher :-D
Hmm soooo, it would be very hard to find/create a driver for the Hurricane, right? But why are there topics with drivers made for the hurricane?
And otherwhise I'd have to open the phone and change the PBA with a Tornado one, right? But can I take that PBA out so easily? I won't have to solder or anything like that?
Again, thanks for your help!
Keyno(t)
There are no Hurricane specific driver threads. It is a re-use of generic WM 6 variant drivers on top of the low-level drivers.
And yes - if you manage to open the case (be careful when opening not to rip away the flex cables for camera and keyboard) then there is no soldering required.
Look up the service manuals for either Tornado or Hurricane (even Typhoon will do) to get an idea which screws to remove and how to remove the antenna cover. Challenge is to swap the LCD if you need to - some delicate handling of the flex connector as well there.
No impossible mission, but you need some mechanical skills and a rainy day without time pressure if you do it the first time.
Depending on your budget the cheapest solution may be to wait for a good opportunity on ebay to buy a used Tornado - they get sold for 20+ euros. If you do not need WLAN, then go for the SPV C600 (France) or the O2 XDA phone - but these are rare species these times.
Hmm at anyway I don't find anything in ebay I could need...
So you also said it could be possible to write my own driver? Is that true? And you know any How-To's that could help me a bit by this?
And really thank you for your help!
Keyno(t)
Finding this on ebay will require a few weeks - so be patient and keep on looking. How much would you want to spend for a Tornado (XDA phone - no WIFI, or the 8310 with Wifi)?
Regarding the drivers: Seems like you did not get the irony in my comments Writing low level drivers is something very special. It is virtually impossible to write a driver on your own - so forget this option!
Ouw okay, and yes I didn't exactly understand it
So I have only one choice
I think it shouldn't be more than 20€, max. 30€.
And could I really have also WiFi in my Hurricane, or why you ask all the time about WiFi?
I don't really need it, but if the price just change about 5-10€ I'd rather buy one with WiFi
And again: thank you very much for your help!
Greetings
Keyno(t)
Did you get it? If you replace the PBA - then you may still have the case of a Hurricane (despite in the US or China the same case carries a Tornado) - but the device is a Tornado then - bye bye Hurricane.
The Tornado was built in two flavours with and without Wifi - more common in Germany was "without" as the O2 XDA phone has no WLAN. The other device is the Qtek 8310 (also in silver as Vodafone VDA 2) which has WLAN. It will only rarely happen that broken devices are sold (people just put them in the waste or return them to the shop for recycling) - but keep on watching.
If you get a fully working Tornado I would not bother to replace the PBA but use it as it is - unless you disassemble it for fun and learning.
Okay thank you very much for all your help!
Now I got it
Greetings
Keyno(t)
...just to close the query: It IS (!) possible to have SDHC in the Hurricane working. read about it in my related kitchen thread (post 4) http://forum.xda-developers.com/showthread.php?t=1553132
Kitchen is not updated yet - but who cares anyway...

Broken Display replacement necessary

Hey guys,
after 3 happy weeks with my p9000 it fell out of my pocket and landed right on the corner. Now the lower part of the display and the home button are not working anymore :crying:
Since I did not find any replacement display I thought about asking the community, if you have experience in this case. I am currently living in Germany and do not know if tome repair is a helpful adress, since the y did not respond my calls or mails.
I am happy for any tipps or feedback
Best regards
Stinkelefant
Hab ein ähnliches Problem, bei mir funktioniert nur der Homebutton nicht mehr und manchmal hab ich eighenständinge Angaben, und hab tomrepair auch eine E-Mail geschrieben und bis heute keine Antwort erhalten.
Warte bestimmt schon mehr als eine Woche, find ich echt schade, super Handy aber kein Ansprechpartner bei Reperaturangelegenheiten..
Yeah tomrepair.de is a shame. Has anybody a source to buy a replacement display or has anyone bought a display at elephone itself? Is that possible?
wasjapupkin said:
Hab ein ähnliches Problem, bei mir funktioniert nur der Homebutton nicht mehr und manchmal hab ich eighenständinge Angaben, und hab tomrepair auch eine E-Mail geschrieben und bis heute keine Antwort erhalten.
Warte bestimmt schon mehr als eine Woche, find ich echt schade, super Handy aber kein Ansprechpartner bei Reperaturangelegenheiten..
Click to expand...
Click to collapse
Hi there,
Just to let you know there are many users from many different countries on XDA, therefore the language you should use for your posts is English as its a pretty universal language around the world and you will get a better response by not limiting yourself to users who understand your mother tongue.
Jonny said:
Hi there,
Just to let you know there are many users from many different countries on XDA, therefore the language you should use for your posts is English as its a pretty universal language around the world and you will get a better response by not limiting yourself to users who understand your mother tongue.
Click to expand...
Click to collapse
You are right of course.
I was pretty lazy, thats why i responded in german ))
In a nutshell nobody got a answer from tomrepair which is sad
Has anyone managed to replace a broken screen? I tried to dissambly the phone but I could not get all the parts out of it. Can somebody take pictures?
Just purchased a replacement screen from elephone today costing $99. Now looking for any tutorial or video to help me replace it, if anyone finds one please post a link
I too would welcome a tutorial
Here's a link for the display with cheapest price yet: http://www.aliexpress.com/item/Orig..._7&btsid=5f1113dc-5f23-4c17-b59c-b3a04e6e7daf
No: Now it's >100$, when I posted, it was 57$...
I had a p9000. It always felt cheap, and also screen got broken (overnight on the table). I was looking into options to replace but i realised this phone does not worth repairing especially when part would cost half it's price. I had constant issues since purchase. I don't recommend repairing a p9000. even after repair you will get a phone that's supposedly high end but the materials, stupid designers and software renders it a lower-middle phone.
if you replace the screen it may need install driver and brush the
phone, they'll send you a file about how to do it
allanmc said:
Just purchased a replacement screen from elephone today costing $99. Now looking for any tutorial or video to help me replace it, if anyone finds one please post a link
Click to expand...
Click to collapse
have you managed to replace the screen? did they sent you a file on how to install driver and brush tool?
i have already make contact with tomrepair.de and they answer me after few days that they accept to take my phone to repair. Now i need to ship it to Spain
stinkelefant said:
Hey guys,
after 3 happy weeks with my p9000 it fell out of my pocket and landed right on the corner. Now the lower part of the display and the home button are not working anymore :crying:
Since I did not find any replacement display I thought about asking the community, if you have experience in this case. I am currently living in Germany and do not know if tome repair is a helpful adress, since the y did not respond my calls or mails.
I am happy for any tipps or feedback
Best regards
Stinkelefant
Click to expand...
Click to collapse
i have made a video to show you the way to repair the phone it is quite straight forward and at the end i show the driver you need to flash the phone with. just go to youtube and type Elephone P9000 screen repair and tutorial. it goes for 29 minutes i would post the link but i can not until i post 10 comments
https://www.youtube.com/watch?v=irDOXh1QoKE
Thank you for the video in elephone cc sell the screen but the site has been hacked at the moment so wait until they resolve the issue (if they know) . It cost me 76 USD plus 2.6 pp to UK ,arrived in 9 days, I did not receive the file or instructions so for the moment the screen is blank although the mobile works ok after the change, I can access by USB to the files. So receiving the file for reset seems to be a must have.
still i'm not able to install the driver. if i click the download button nothing happens
Does anybody know how to proceed if the metal frame has a slight dent such that the new replacement screen does not fully fit? f**k me

Categories

Resources