hi i was flashing my jasjam (the usb method) and the thing stopped anyhow reading on the net i was told to unplug it and now it gets stuck at the first logo screen.
i can get up the tri colour screen and my settings are
HERM100
IPL-1.01
HERM100
SPL-1.11
now i have flashed this jasjam twice before this happend and i have been scouring the threads trying to find a way to fix this (possibly by installing the os via the sd card if thats possible?) and the only thing i have come across that looks like it may help is a post i read elsewhere on this site but cant post the link as i am a new user but i have wrote what i think would help below.
ultra mag sent this in a reply to someone else with a bricked jasjam"If you have a memory card 2Gb or less, go to the Hard SPL thread, download Hard SPL V7 and then read post 1160 on page 116. You can drop the steps using sspl.exe as you have an old version of Hard SPL on your Hermes. Once you have Hard SPL 2.10 oli and an IPL of 1.04 then use the same method to install a rom. This will NOT fix the no GSM problem, there is no fix for that...
But at least you will have a PDA..."
will this work to fix this brick or not ( i never installed Hard spl on it)
any help would be appreicated and if ultramag69 is reading this could you please help me understand what you said above?
(i have a fairly good knowledge of computers but i may need help understanding terms you guys use.)
Reply With Quote
same here
I have exactly same problem as yours. I read alot of topics on forum but i can't manage to fix my Jasjam yet. Did you fix yours?
Best regards.
same here,but nobody seems to give a dam
Related
hi i just got my hermes 2 dayz ago and i bricked it what the hell :d
anywayz now its stuck on windows mobile green splashscreen as i was installing win mob 6
and no gsm appears as looks like i messed up the radio
spl version is 1.11
doesn't wanna install any thing at all from radio to spls to anything
gives me error 270 off corrupt files
mine doesn't have the km something where you use to place the spl file in it to pass protection after downloading a 2 gb windows :d
any way i tried everything even flashing from sd gives error what the heck happened it boots up normal till the windows screen
and if i want the 3 colour screen it will show up
help me fix it my dad is gonna kill me i swear
Did you flash it with HardSPL before you tried upgrading?
Rather than shouting about how foolish that is, I will point you in the direction of the sticky post above you http://forum.xda-developers.com/showthread.php?t=286755
or please please visit http://wiki.xda-developers.com/ and read the upgrade guides.
oh well you think i will post anything here beofre reading the whole forum damm i need help guys its 1.11spl doesn't wanna go to oli or anything
makes like 7 perecent then file corrupt
i understand that kind of feeling dude.. i think times like this better help than pointing links.. in this kind of situation people are in state of panic.. they don't have the time to read.. if i would know the solution to that i might gave you the answer straight away.. hey but don't worry there are good guys out here who will help you.. just try to relax for the moment.. or download the default package and install for the meantime..
damm i usually flash nokias not imates :d i really need help guys
it all started when i was flashing a rom and it hanged up so i removed the cable usually do this and nothing happens
any ways the spl was 1.09 dunno how it went to 1.11
no nothing wants to be placed on it stops on the screen of windows no gsm
gives either update error or some other crap
anyways i read they say send it to repair is there any other choice
Did you try to flash Bootloader SPL 1.01 MFG and use mtty.exe to reflash OS and Radio?.
Please review this link: http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
ensure that you are using the correct file format and read all about Super CID.
Good luck
it writes cmd instead of usb
and after i wrote everything no rebooting occured
USB>task 32
Level = 0
USB> lnbs SPL-1.01.nbs 50020000
USB> task 8
when i place task 32
comes out level =ff
and how do i write inbs help folks new to this
guys plz i need help urgent im flyin today and need help plz
thebomber said:
guys plz i need help urgent im flyin today and need help plz
Click to expand...
Click to collapse
sorry about your situation. they have pointed you in the appropriate directions. Unfortunately the majority of users don't ever experience what you are first hand. All we can do is point you to posts of where it happened to others and the threads tell how they resolved it.
If you were having trouble flashing HardSPL you should have asked for help first before trying to flash something else. Hard SPL IS the lifeline. You may be able to recover the PDA portion of your device, if you are very lucky maybe the radio. In any case the only thing that will help you is reading through the bricked hermes thread and determining which of the scenarios applies to you and then asking in that thread for help from the pros. They tend to monitor that thread more than the random "help me I bricked my phone" threads.
well i don't have mind in that send it to repair centre and got it 1 hour later
lol
UnBrick the Bricked Hermes with "SPL 2.03 - IPL 1.04 - NO GSM - KITL Disabled"
There are many people have this kind of brick but still no solution for it.
I want to ask the mods to make this thread sticky so if anyone find a sulotion for this type of brick would post it Here.
Summary :
IPL: 1.04
SPL: 2.03
CID: NO CID (Request timeout on mtty.exe)
NO GSM
KITL Disabled
I have tested all the possible sulotions available in the wiki but none of the could help me unbrick my hermes.
P.S. : Please just post your sulotions here NOT your comments like "you should superCID your device first", "It's your fault to use telstra wm6",....
Has anyone found a sulotion for this???
You Pm-ed me asking what to do and i pointed you in the correct direction so why have you started this thread?!
Hermes Unbricking Thread
and
Wiki page: How to unbrick your bricked hermes
EVERYTHING you need is there, you just have to read.
Maybe You do not read my Pm!
I have read all the wiki and thread concerning my problem several times!
The simple truth is that some phones are unrecoverable and have to be sent off for repair. Yours is one of these situations and I very much doubt that this will change. More and more of the pioneering technical guys will have updated their Hermes to another phone and the much admired POF has not been seen since he was accused of stealing...
The tacit feeling is that there is enough information and utilities to prevent people bricking their phones (i.e HardSPL and Update from MicroSD card) so if you do find yourself in this unfortunate position and can not recover your phone then you have to bite the bullet, and be better informed the next time.
POF accused of stealing !!!!????
What's that all about?
I dunno if I have a the same problem, but a similar issue, and trust me I am "PC guys, AMD fanboy, A+ tech:"whatever you wanna call i, I am expanding my horizons and I got into the mobile PC world. Trust me I am NOT Google lazy, i have read and read and read and researched and cross-checked and tried literally everything. I am stuck, I know what is wrong with my Hermes, I know where it messes up, and I DO see threads in other sites with 99.9% the same problem I have and I see NO soultion or anyone who knows or Really wants to help, I feel for Koorosh we need help, I have come to terms if have to send it away to repair. That bugs me I got it Literally 3 days ago, and ONLY used the OFFICAL AT&T WM6 Rom to upgrade
on my bootloader all I see is this........
IPL: 1.04
SPL: 2.03
I have too see in my display
IPL: 1.04
SPL: 2.03
when i can flash radio 1% and restart device!
try it
i also had the same problem.i have resolved using rom update through memory card.look for it in wike section.all the best.try it with original rom that came with the phone.
this will not work in this site again no solution for bricked spl2.03 cid locked
biswajitghosh said:
i also had the same problem.i have resolved using rom update through memory card.look for it in wike section.all the best.try it with original rom that came with the phone.
Click to expand...
Click to collapse
Do you know to read micro sd flash not work when device is not superCID!!!
I maybe have the same issue.
From the HTC ROM I flashed my device to Shannix Grass rom, a few days later I flashed to Satin Black rom, so far so good. After that I want to flash back to Shannix Grass and my deviced crashed. While booting he stuck at the HTC screen.
I tried to hard reset, flash another rom (stuck and reset at 1%), flash the bootloader (stuck and reset at 7%). After the failed ROM flashing I get error 270 image is corrupted.
In mtty I tried to format the NAND, and tried the erase command, nothing worked.
How can I diagnose the problem further. Is it possible to see why the ROM update failed or why the OS won't boot? I did some monitoring with USB monitor but I didn't get results where I get some conclusions of.
---
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 2.03
Built at: Jun 16 2007 01:57:22
Copyright (c) 1998-2006 High Tech Computer Corporation
(My device is Herm200)
wow , i have the problem too. i almost live in phoneless .
.
SOLVED !!!!!!!! my phone now works
If your device became inoperable like mine, because i had a failed ROM upgrade,and the device failed to power up i have good news for ya.
MY DEVICE info is as below.
Problem:
Phone does not boot up, and looks like a red brick.
IPL: 1.04
SPL: 2.03
(it always gave an error 206 at 1% of any ROM update i tried)
Solution:
I downloaded the official WM6 ROM from the HTC's website below,
http://www.america.htc.com/support/8525/software-downloads.html
Then reset my device to the bootloader screen.
(holding the 'ok' button and the 'power' button and then using my stylus to push the 'reset' button close to the USB port.
i then disconnect the USB cable from my phone, and the display showed 'serial'.
i then ran the downloaded file, and waited till the collecting information from phone window came up, then i connected the usb cable back to the phone.
it connected, and VOALLA!!!... it started the update.
at least its better to have a working phone(without all the custom stuff), than none.
I hope this was not booring( with all the detail and all), but i hope it will help anyone out there who's device wont bootup.
wow , congraution!
i will take the method. but i wonder should i have to get the "connecting time" in the right point, or the computer can't find my phone??
( hope u know what i mean?)
Um.... i cant say for sure
weyun0513 said:
wow , congraution!
i will take the method. but i wonder should i have to get the "connecting time" in the right point, or the computer can't find my phone??
( hope u know what i mean?)
Click to expand...
Click to collapse
Well.. i can't say you should wait 1 or 2 seconds, but just plug it in as soon as you get that screen. i hope it works for you tooo.
what was ur exact situation beforeu can unbrick ur phone???
IPL?
SPL?
KITL??
NO GSM ERROR?
what was the rom that has bricked ur device??
where did it stuck during the brick phase?
is that 1st splash,2nd splash,...??
This method did not work for me!!!!!
Try the Official Cingular ROM
koorosh_bsboys said:
This method did not work for me!!!!!
Click to expand...
Click to collapse
My Hermes "red hot brick" happened when i tried upgrading to aCRCs_PHKv12r8, from a Schaps_WM6Pro_Hermes_4.31_WWE_Full ROM.
My device is a Cingulat 8525.
The upgrade went to the tricolor screen, and after 1% , my phone magically went off. I tried powering on, but it went to the tricolor screen again showing
IPL 1.04
SPL 2.03
and underneath showed "serial".
me too i'm having the same problem....any experts out there that could help us?
Hi,
I just flashed my HTC 7500 with SPL 1.2 by installing AthenaWrapper which went through successfully. After upgradation , I flashed the ROM with SPL3.5_R6.5_B3_WM6.5_B21198.rar which also got installed successfully with no errors at all. However after installation , when the HTC was starting , it is just stuck at white screen and does not go ahead at all. I have tried all things including hard reset , but the phone does not come out of the white screen.
Can someone please help URGENTLY ? have I missed something during the installation ? How can I get the unit to boot atleast . In the bootloader screen , the SPL does show as 1.2.
Kindly help please ???
Thank you.
superlifer said:
Hi,
I just flashed my HTC 7500 with SPL 1.2 by installing AthenaWrapper which went through successfully. After upgradation , I flashed the ROM with SPL3.5_R6.5_B3_WM6.5_B21198.rar which also got installed successfully with no errors at all. However after installation , when the HTC was starting , it is just stuck at white screen and does not go ahead at all. I have tried all things including hard reset , but the phone does not come out of the white screen.
Can someone please help URGENTLY ? have I missed something during the installation ? How can I get the unit to boot atleast . In the bootloader screen , the SPL does show as 1.2.
Kindly help please ???
Thank you.
Click to expand...
Click to collapse
Hi there,
You have answered your own question. you up graded to spl1.2 and then flashed with an spl3.5 rom. you should have flashed an spl 1.2 rom. To use an spl 3.5 rom you need to upgrade again with AP4.0 rom that has the upgrade built in. there is no other way of doing it.
Now you will have to fix your athena with THIS HELPread from post 33onwards, and please read the athena WIKI.
Best of luck
Jay
Hello Jay,
Thanks for your quick reply. How do I get the Athena connected to my PC now ? I can't connect it through Activesync as it does not boot and is in white screen. Also I tried to put it in boot loader mode and then run the updater.exe but it displays a 'Timeout message ' whether the device is coonected and that Active sync is running ?
Can I install 1.2 ROM if that's possible ? If yes , can you let me know which ROM with SPL 1.2 ver can work ? I am just worried now as my Athena may be completely dead and I can't use it.
Can you help ? Thanks once again.
Hi Jay , Folks,
I am writing the codes that I see when I put Athena in bootloader mode :
[email protected])
IPL-v1.00
[email protected]$)
SPL-v1.20.Olipro
From this info , can it be fixed ? Please help
Thanks
Hi superlifer
welcome to the joys of flashing!
Jay has given you a solution to your problem.
Guess what!
You are not the first person to make the mistake you have made and it is documented in several places.
Jay pointed you to the specific post that will fix your problem but he also mentioned you should read the wiki.
i will add to this that you should also read the sticky threads at the top of this forum which include "the beginners guide to upgrading the ROM"
and another thread titled "How to FIX INVALID MODEL ID after bad flashing"
You have corrupted the radio by trying to flash an SPL3.5 ROM onto a phone formatted for SPL1.2.
These roms are different sizes and it wont fit, leading to the unintended consequence.
As I said in the beginners guide , you can flash from bootloader(the 3 coloured screen"
I hope all new owners read this thread and the others I mentioned as it will help prevent the angst you are feeling.
regards lakeman
Hello Jay, Lakeman, Cmonex,
Absolutely brilliant !!
My Athena is breathing again and is out of the dead white screen. I followed the steps to fix the model id and wifi (from CMonex ) and was able to overwrite the model id successfully. I then flashed it with ROM WM6.1 MULTILANG R6.1 MiChY which also got installed successfully. On bootloader screen it now shows as:
ATHE100
IPL-v1.00
ATHE100
SPL-v1.20.Olipro
Many thanks first of all to you all and your timely reponses and perfect guidance.
I just want to know now which is the best stable SPL1.2 ROM now which i can install. I want to install 1.2 ROM with HTC Plugin and the big Digital clock and also which will have GPS. My previous ROM had QuickGPS which doesn't seem to be there now and is there way I could get it back. How can I use GPS on Athena.
Apologies as this device is completely new to me i am still getting used to its functions by reading lot of articles and WIKI for this model.
I am scared to put SPL3.5 as I might break something again. My donation is on its way.
Cheers
Just update to the 3.5 spl much much easier that way instead of waiting for anyone to backport their stuff to the 1.2 spl
hi everybody...i'm new on this forum and i don't have any experience with flashing roms...i have a Hermes with windows mobile 6 that doesn't want to go along with the upgrades(SPL for start).I read a lot of tutorials but no luck..booted the phone in bootloader mode:
HERM300
IPL-1.01
HERM300
SPL-1.40.Olipro
i'm not the first owner of the phone...it runs well but i'd like to put wm 6.1 on it.
i have tried to hard spl, my phone resets in bootloader mode...the pc recognizes it but after 2-3 minutes it gives me an error( error 260)...
I am currently using windows vista ultimate 32-bit...please give me a hand guys...thanks in advance
please start reading here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeForBeginners
best way to flash is from the SD Card:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
thanks alot for the response but i am aware of the procedure...i was thinking of trying to flash the rom directly without hard spl...i know it's not recommended...if someone could help me with the error i get i'l apreciate it...
just wondering...could i flash a windows mobile 6.1 rom using the sd card method without doing hard spl (using the spl i have now: 1.40 Olipro) ?
w3b3r said:
thanks alot for the response but i am aware of the procedure...i was thinking of trying to flash the rom directly without hard spl...i know it's not recommended...if someone could help me with the error i get i'l apreciate it...
just wondering...could i flash a windows mobile 6.1 rom using the sd card method without doing hard spl (using the spl i have now: 1.40 Olipro) ?
Click to expand...
Click to collapse
for the SD card method you need HardSPL v7... you will have to flash it... not much else anyone could do with it.
thanks for the posts guys..from my last post i've flashed a f ew roms on my hermes without any problems..istil have spl 1.40..i guess the risk of bricking my device is bigger..i'm now lookIng for a clean 6.1 rom..without any preinstalled aps and crap i dont use...a recommandation would be nice
I want to help someone on this please , bcs HTC SPV M3100 when i'm trying to switch on phone was stuck on HTC logo and nothing more , i have try to put on boatloader mode and phone was going on bootloader mode three color screen and show this:
HERM100
IPL-1.04
HERM100
SPL-2.03
i'm trying with hard spl from Pof soft but error getting.
Can someone find a time to help me?
hallooo
experts please!
Hello haveri,
what ROM are you trying to start? I was stuck on HTC logo too, when I tried to start a ROM without installing Striped ROM first, which was highly needed. So I done hard reset(three color screen), and flashed again.
For starters, put in bootloader, connect to PC (1st untick "Allow USB Connections" in activesync) and run Hard SPL V7. Install it on your Herms and hope it works because otherwise you are in for a whole heap of hairpulling frustration...
If you get Hard SPL onto your Hermes then use the sd card method to flash a new rom...
You could have avoided this by doing a little research instead of going full pelt into flashing, you Hard SPL BEFORE you get into trouble, NOT AFTER....
Hi guys,
I have a similar problem with a T-Mobile branded TyTn from a friend of mine who thought flashing ROMs without putting device into HardSPL would be clever.
The devices has also IPL-1.04 and SPL-2.03 and from the bootscreen it looks like WM5 should have been installed. I also get the "NO GSM" message and I REALLY tried every fking method but without success.
I even created a Goldcard (and verified on another device it's working, level 0 instead FF) and tried to flash several ROMs (also Cingular WM5 ROM and original german T-Mobile ROM) but no luck.
I also tried to run HardSPL V7 but as far as I remember it just said it cannot connect.
Funny thing: HardSPL V9 DOES start flashing and on the PDA and the PC the bar shows 100% but some moments later it says "Could not update" (or something like that).
I even tried different mtty methods from several posts from the forum (erasing the NAND on different ways, qtek loader method with erasing the first blocks) but I'm really really frustrated now and I believe there is no solution here?! (device has no guarentee)
So, if someone has ANY hint or useful information write it down or send me a PM.
I gladly appreciate your help and hope for a solution!
Cheers
P.S.: I couldn't find any information saying Goldcard method works (or even exists) for Hermes. Can someone confirm it does really work?