i seem to have problems installing hspl because my current version is 2.10, anyone know how to downgrade to 1.42?please help really frustrated -____-
HSPL3 is out now, believe it will solve your problems, simple search should do the trick.
Related
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click on the mrvanx guide at the bottom of my signature, it will tell you how to downgrade in the guides.
mysharif said:
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click to expand...
Click to collapse
I have been there mrvanx guide. but he don't have the solution to this problem. Just to downgrade the rom to wm5 not the SPL.
mysharif i think we have to shout again.
Help us anybody there we are stuck here.
OK guys the SPL downgrade can be done by downgrading to SPL 1.10.oli then flash any ROM with SPL 1.04 in it.
The only reason i can see that you wish to downgrade to 1.04 is because of a warranty issue. What is the problem with your devices??
You are great. I hope it will work for my Imate JasJam. Last night I was flashing my ROM with the original ROM but modified with NBH decomplie too by dutty. Before that I wrecked my device as I used the flashing of ROM using the latest sensation of loading the SSPL to RAM by des. That was my mistake that I used the original ROM. Then I removed the USB cable as it was taking too much time and because of danger to my imate I did that. Anyhow I got the NO GSM error but then I ran the Dutty's WM6v2 cooked ROM and it fixes all the things I am using it now.
The reason for my Imate JasJam degrade is my jog is not working according to its function. You know jumping from field to field. I didn't found any of that problem solution till the page of 30 in threads and posts. I am searching but if anybody knows the link. Kindly help me. So that I will save a trip to see the warranty people. (here we don't have ladies receptionists )
Sorry for the stupid question, how do I downgrade from Oli 2.10 to Oli 1.10
Il write a guide on it...too many PMs about this.
mysharif said:
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click to expand...
Click to collapse
I have the same problem. My touchscreen is dud and Softbank is very anal about the bootloader and warranty. im stuck with Olipro 2.10 and tried flashing the latest softbank rom. When i try via USB/Windows it gives me error 260.
Flashing with MicroSD works, but after a few attempts, its still Olipro bootloader...any ideas?
aquasesh said:
I have the same problem. My touchscreen is dud and Softbank is very anal about the bootloader and warranty. im stuck with Olipro 2.10 and tried flashing the latest softbank rom. When i try via USB/Windows it gives me error 260.
Flashing with MicroSD works, but after a few attempts, its still Olipro bootloader...any ideas?
Click to expand...
Click to collapse
Ofcourse...because flashing an original RUU it doesnt recognise the new bootloader (Hence your 260 error), and HArdSPL doesnt allow itself to be overwritten by a retail RUU. IF you read through the HArdSPL threads you would know this.
mrvanx said:
OK guys the SPL downgrade can be done by downgrading to SPL 1.10.oli then flash any ROM with SPL 1.04 in it.
The only reason i can see that you wish to downgrade to 1.04 is because of a warranty issue. What is the problem with your devices??
Click to expand...
Click to collapse
Hmmm, just yesterday (Thursday) I was asked by a VP at our company if that could be done. I was reluctant to say yes, but mrvanx comes thru with a fix.
The VP is in fact worried about having to return some devices to Vodafone, and he want to make them look "original" when they go back.
GreatGrey said:
Hmmm, just yesterday (Thursday) I was asked by a VP at our company if that could be done. I was reluctant to say yes, but mrvanx comes thru with a fix.
The VP is in fact worried about having to return some devices to Vodafone, and he want to make them look "original" when they go back.
Click to expand...
Click to collapse
Just flash SPL 1.10.oli.......................then flash a vodaphone ROM, dont use 'force SSPL', just use autodetect.
well to get spl 1.04 all u have to do is take rom koch and the wm5 rom u are downgrading to. first downgrade os. then take that rom and using rom koch split it into parts and just take the spl and make it into a nbh and use the custom ruu on here. select force sspl and itll make ur spl 1.04. this is a quick guide and do this at own risk. using this method i got my first 8525 to aku 3.5 att and original spl. if marvanx comfirms i didnt make any mistakes i can make a new thread with pics and all so we cna add this to resources and stop the questions.
Pawel062 said:
well to get spl 1.04 all u have to do is take rom koch and the wm5 rom u are downgrading to. first downgrade os. then take that rom and using rom koch split it into parts and just take the spl and make it into a nbh and use the custom ruu on here. select force sspl and itll make ur spl 1.04. this is a quick guide and do this at own risk. using this method i got my first 8525 to aku 3.5 att and original spl. if marvanx comfirms i didnt make any mistakes i can make a new thread with pics and all so we cna add this to resources and stop the questions.
Click to expand...
Click to collapse
Or you could just wait until my guide is finished??
You dont need to use the rom koch ... duttys nbh tool is far more appropriate for this since we aint doing any cooking.
yea your right I just wanted to reduce your work load.
mrvanx said:
Or you could just wait until my guide is finished??
You dont need to use the rom koch ... duttys nbh tool is far more appropriate for this since we aint doing any cooking.
Click to expand...
Click to collapse
Hi mrvanx, some input to go into your guide (in case you havent come across this yet).
While flashing 1.10Oli under Vista, users may run into a problem where after loading SSPL and the phone goes into (SSPL) bootloader mode, the RUU program cannot detect the phone and returns an error.
This is due to the Vista drivers for HTC USB Sync. The driver needs to be manually "updated" just like in your Vista flashing guide. In this case, while the phone is in SSPL bootloader mode, go into device manager, replace the default HTC USB Sync driver with the USBAS one from your Vista flashing guide.
Then soft reset the phone, and try again. Worked for me.
For some reason, SSPL bootloader may appear as a different device to Windows than the hard/standard bootloader, so even if the Vista procedure has been performed before, it looks like it needs to be done also for SSPL.
My Ameo has started to freeze at the loading screen just after the rom and radio version numbers disappear from the screen. Originally i was using AP5 and decided to downgrade to SPL 1.2 to try some other roms. I followed the procedure and flashed ap3 new and then ran SPL downgrader to try some other roms which seemed to work correctly. Unfortunately when flashing any SPL 1.2 rom the box gets to 100% and reboots as normal but i get the problem mentioned above. I have tried to search the forums for anything related to this and if I have missed anything I apologise. Im now without my beloved Ameo so thanks in advance for any assistance you can provide.
Did you remove your SD card? This will cause problems some times...
Just to add the IPL and SPL numbers on the bootloader
Just to add the IPL and SPL numbers on the bootloader are :
ATHE100
IPL-v1.00
ATHE100
SPL-v1.20.Olipro
photon2 said:
Did you remove your SD card? This will cause problems some times...
Click to expand...
Click to collapse
Yes i have taken the SD card out and get the same problem.
Does no one else have any ideas?
Does no one else have any ideas? times are so hard now im having to use a Samsung E900 do you feel my pain...
Now you're on SPL 1.2, have you reflashed to a 1.2 ROM? AP3New is still 3.5. Boot into bootloader and give it a try.
I have tried all the ones i have found.
Currently i have t-mobile WM6 rom from their website flashed but I have also tried IRUS Vanilla Rom, Sogarth Base Rom 1.2 and well all of them I could find for 1.2 but all freeze at the same point when resetting (albeit with different bootscreens). As you would guess im desperate, I would guess that when downgrading to SPL1.2 its gone wrong somewhere. Does anyone know of a way to update the SPL back to 3.2 from the bootloader as thats the only way i can get a connection to my phone from my pc.
Thanks for your replies so far.
Sorry i meant SPL3.5
Hi,
I've tried upgrading to the official rom yet it always freezes on the RUU (or sd card method) at 11% (or 12% if I use hardspl V7)
Ive tried using the guide on here The wiki and on the other page on wiki yet neither have helped me restore my gsm.
Up till I used the HardSPL I've been able to boot the OS but now its stuck in bootloader.
Does anybody know what to do know?
My IPL: 1.04
SPL: 2.03
I have the official rom which I'm trying to flash, does anybody know how to wipe out the problem, also this isn't related to bad blocks since I've scanned for them
If anybody has any ideas ill be happy to try them.
Thanks in advance
Anti
Hello,
I have the exact same problem with my Softbank X01.
I hope there is a fix for this.
I bought an HD2 from a friend, and i found it already with HSPL 1.42.HSPL, but checking the HD2 HSPL thread i found that now there is v2.08, do i need to update to it? will i gain something that i don't have now?
I have just installed Dutty v7 ROM with the current HSPL, no problems.
(I am a 'have latest version' person, not 'if it ain't broken, don't fix it' person)
no, no real reason to change. It wont add anything. If you're happy, then leave it be.
Hi guys,
After stumbling across a guide on how to get android 2.2 on to my HD2 i thought it was time to let the old wm6.5 leave my phone for good. The guide is easy enough to use i guess but I'm struggling a bit with getting my SPL down to 2.10.0000 to install HSPL3 on my phone. After reading and googeling in this forum, i have learned new words like radio and what not, but it is still not very clear to me how to downgrade my SPL. My SPL is now at a staggering 3.03.0000.
Would be nice with a bit of guidance, a link to the right guide for me to use or something. Its really amazing things you are doing here.
Cheers guys
Read this thread http://forum.xda-developers.com/showthread.php?t=893948
Russ
Thanks for a quick reply.
I have already looked at a few of these guides but they get me a bit confused. In order to install HSPL3 i need to get my SPL down to 2.10, and in order to downgrade radio or ROM, i need to have the HSPL3 or something similar hacking thingy. In the link i got from your post its recommended to use Radio version 2.15.50.14, that might or might not have an SPL below 2.10. If i could get a simple guide or a bit of assistance on how to get my SPL suitable for HSPL3, everything will be hunky dory.
cheers
jubocrisp said:
Thanks for a quick reply.
I have already looked at a few of these guides but they get me a bit confused. In order to install HSPL3 i need to get my SPL down to 2.10, and in order to downgrade radio or ROM, i need to have the HSPL3 or something similar hacking thingy. In the link i got from your post its recommended to use Radio version 2.15.50.14, that might or might not have an SPL below 2.10. If i could get a simple guide or a bit of assistance on how to get my SPL suitable for HSPL3, everything will be hunky dory.
cheers
Click to expand...
Click to collapse
Install a previous stock ROM; a version before the 3.14 stock ROM.
make sure that the stock ROM match your device aria/language
Cheers, just what i needed, a simple answer. So now i guess i am almost finished but encountered another problem:
Problem: On some devices MAGLDR won't boot at all (HTC logo stay after turn on).
Solution: Install HSPL208.
Don't understand how to install the hspl208 instead when my phone is not to keen on booting. If i get a little assistance with this i guess i should be able to finally get Android on my phone
hurrah,
After dicking around a bit i managed to sort it out. Cheers guys and thanks for all the help