I have been told to send back my HD2 for repair by HTC as they said it is definetly faulty (Audio delay, delay dialing numbers, keypad slows down dramatically during sms typing).
Now I know as well as the rest of you, it's not faulty, it's just HD2's common problems, but they assure me they can send one out without these issues.
But before I send it off, can anyone tell me if this is a stock ROM etc. I've installed so much I can't remember what is stock & what is not lol.
Also, how can I remove HSPL if I have it installed, and how do I tell if I have?
Many thanks.
Ok, so I managed to check it by pushing the volume key down and resetting, this is the info it gave me:
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
Is this the version that comes with the phone or is it something I' ve installed?
Just so I don't invalidate my warrenty when I send it back?
I've found out how to remove it, but I there's no need if it's the one that came with my HD2.
Thanks for any help at all.
HTC_Junglist said:
Ok, so I managed to check it by pushing the volume key down and resetting, this is the info it gave me:
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
Is this the version that comes with the phone or is it something I' ve installed?
Just so I don't invalidate my warrenty when I send it back?
I've found out how to remove it, but I there's no need if it's the one that came with my HD2.
Thanks for any help at all.
Click to expand...
Click to collapse
That is something you installed ....
search and download HSPL3 run it, select sp1.42 or spl1.66(just changed this per sams post below) , that will remove HSPL and put it back to stock spl. It looks like the ROM is a stock one, but if you want to be sure after removing HSPL , download and install a stock ROM for your phone ...
stop, only tmous phones ship with spl 2.x, and an official tmous rom would fail to flash on your phone without hspl so they will know you've been tampering.
use hspl2 and choose either 1.42.0000 or 1.66.0000
the rom should be fine, it's hspl that is the deal breaker.
@watcher, you would be spot on for a tmous user
samsamuel said:
stop, only tmous phones ship with spl 2.x, and an official tmous rom would fail to flash on your phone without hspl so they will know you've been tampering.
use hspl2 and choose either 1.42.0000 or 1.66.0000
the rom should be fine, it's hspl that is the deal breaker.
@watcher, you would be spot on for a tmous user
Click to expand...
Click to collapse
@samsamuel I am glad you caught that, I had just answered the same question of a TMO user, and I guess my brain was stuck .... Updated my post
Thanks guys for your answers,
I don't know if this helps, but I am on Orange, I bought the phone on a 18 Month Orange contract from Dial a Phone, but in the phone identity page under "Model No" it says T-Mobile_LEO
Thanks again for all your help.
that's t mobile uk, though, same hd2 as all the rest. only tmo usa have a different phone.it will be fine with that wwe rom so long as hspl is gone
Thanks to both of you very much.
So this is what I now have:
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
I'm hoping this is as back to normal as I will get it, ready to send back to HTC now.
Again, thanks to you both, very much appreciated.
just realised you have a 50 radio installed, which are from tmous.not sure whether that's worth worrying about but for safety i'd re run hspl2 apply an hspl, flash a 51 radio then remove hspl again just like before.
i would probably go for 2.06.51.x radio or there abouts.
Okay, I'll try that now, thanks again.
Right, think I've done this ok.
So this is what I now have:
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
&
Radio: 2.06.51.07
sorted......
Sweet, thanks so much for all the help tonight mate.
Very much appreciated.
Just wonder if they really will be able to send it back without any of the issues I'm having, I really think they are just quirks of the HD2.
I've hard reset it now.
Just checked & I'm still getting the same issues:
Audio not in sync & delay in dialing when tapping a contact to dial, sms typing lags badly after typing about 30 words, built in youtube uploader not working & internet cutting out.
I very much doubt they can fix this, like I said, just seems to be too many peopple with the same issues, but they reckon they can, and they also guaranteed me it will only take 7 days (Again, don't think this will be the case).
They said they won't send a temp phone, but I'm arguing that at the moment as they told me it's a faulty phone.
We will see
Thanks again
heh, best of luck with that. and i think you're right, most of those issues are pretty much standard to a greater or lesser degree, some have them, some dont, some have some of them, some dont,,, its hit and miss, but hey, a second chance at a new phone is always a winner.
Yeah that's what I'm thinking, it's not going to cost me anything to get it looked at so if I end up with the same phone back I've not lost anything.
If I get a new one back it's a bonus.
I'll post back the results when I've sent it back & finally had it returned.
backing up original rom
hi all,
I just bought a TmoUS HD2 (ver details in signature).
Is there a tool with which I can create a image of(basically backup) my current ROM so in the event I land myself in trouble while experimenting I could revert back to the default/stock ROM n Radio?
Thanks
Related
PLEASE MOVE THIS TO THE TMOBILE HD2 SOMEONE
Hey guys, i'm trying to get a replacement for my HD2 since I believe i've gotten a bad shipment one however i'm running:
R 2.10.50.26
G 15.39.50. 07U
D 2.13 KUMAR C5
[this is what appears under the stick together when it freezes]
I downloaded the 2.13 stock ROM from the website here, opened in winrar, extracted the ruu file, reformatted my microSD to a FAT32, placed the file on it and renamed it to LEOIMG and then helpd down the down vol button and hit the power button, it flashes the rainbow screen thing, flashes loading really quickly then goes back to the rainbow screen and says the following [pic included but taken from a crapberry so sorry it's hard to read]
[apparently I can't post pics? so here's what it looks like I can provide a picture link via PM unless I get verified]
[RED BLOCK]
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x05
[GREEN BLOCK]
[BLUE BLOCK]
[WHITE BLOCK (also says serial)]
Any ideas why I cant flash the stock ROM so I can return this without voiding the warranty guys? It'd be much appreciated.
Also if it matters i'm using the TMobile 1024 HD2. I just got it about 5 weeks ago
trying to use a 16gb sd card? 99 times in 100 they fail. (well, the one that came with the tmous does anyway)
You dont need to use card tho...
assuming you have a tmous phone, (you didnt say, and you're posting in the regular leo section, but im gpnna assume you have a tmous)
1 - run hspl3 - choose 2.08.0000
2 - flash the stock rom 2.13 using usb
done
I'll give it a shot and leave an update, apologies if I posted in the wrong area. The reason i'm trying from an SD card is because for some reason the phone keeps freezing and I pull the battery 10+ times a day and it gets stuck at the stick together screen alot [i'm assuming i'm having some issue with it hardware like a bent pin but since it's getting power i'm not sure???] I figured an SD install would go smoother. My windows Vista doesn't seem to like it too much
dont worry about it not booting, so long as you cam manually get into bootloader, you can run hspl and do usb flashes from there. The phone doesnt need to be booted.
As for teh pins, they should all stick out at teh same angle (i.e straight out, all teh same)
OK update:
I tried formatting my good 4gig SD card, put the file on it leoimg and it ran, got to the installing, gave an error, I took it out now. I go into the bootloader now [just read your reply] and it says
RUUNBH
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0x05
cotullaHSPL 0x50
[green box]
Upgrade ROM code error Please try again
[Blue box]
[White box]
USB
I have it plugged in via USB now and i'm in the bootloader so i'm guessing this is a good sign, I try running HSPL3_PKG.exe so I can do as you suggested however I get a rapitool.dll error or something, I tried just running the T-Mobile_HD2_MR_Software_2.13.531.1 which is the ROM exe and get some rapitool error as well so I get this genius idea that it must be the lack of windows mobile center6.1 or whatever. I go, download the 32bit and it says its not supporting my processor? so I got the 64 bit and have the feeling i'll get the same error. I'm running Windows Vista, AMD turion x2 so I think it's a 64 bit. I'll reupdate once I try it all again.
UPDATE AGAIN:
I installed windows mobile center [I needed the 64 version dur de duur]
I ran the HSPL3_PKG and got it back to the 2.08.0000
I went to run the 2.13 update and it freezes at 9%, says that theres an error 290 invalid command. I tried to redownload and try again afew times to no luck so far. Here's what the bootloader says now
[RED BOX] RUUNBH
PB81120 ss-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
[GREEN BOX]
Upgrade ROM code error Please try again
so on and so forth.
any ideas would be appreciated lol
CURRENTLY TRYING:
Downloading the stock ROM from that thread [one that's shipped without the SPL?] hopefully it works when I try to run this one and I can just take it back finally. If not and if noone has any ideas i'll just try to bring it back without a ROM on it [I think that's whats happened now] and just say that I tried installing the official update off the tmobile site and power died somehow and I have no idea what happened maybe?
MOST RECENT UPDATE:
OK so here, I got the shipped stock ROM, loaded it up on the microSD and it goes to loading when I go into bootloader and stops. I tried via USB and bootloader and it never makes it past 0% and just stops. I'm currently assuming that there's no actual ROM on my HD2 for now?? When I run the 2.13 ROM by TMob it shows the upgrade from [blank, there's nothing there] and then to: 2.13 before it errors as I have mentioned before.
Currently i'm running out of ideas, I certainly hope I didn't brick my phone and there's gotta be a away around this somehow. If there's nothing there I should try to put HSPL back on and try another custom ROM perhaps? hmm. I'll give it a try since i'm at a loss and noone seems to have any ideas. Please if ya do feel free to share them, I wish I didn't have to experiment like this on my own with not too much knowledge on mobiles. My computer knowledge rests in networking and random bits like Java :s AP comp sci helps not here
*insert happy dance*
slowly but surely i'm learning my way around this...I think
I have done the reverse now and got HSPL back on my phone. Currently I'm trying to install wither the stock rom via USB and bootloader or the Energy.Leo ROM one though both keep freezing about halfway through the install. It's rather annoying because it's happening at what appears to be random times. I'm still considering goign back to SPL and claiming their official update fragged my phone and I have no idea how but I want to keep this trying.
you're sending it back, right? well only the spl is important, doesn't matter about the rom.
so long as in bootloader it says 2.08.0000 or 2.10.0000 then you can send it back.
I think from what i'm hearing your Radio partition is **** up.
Or ur CID isn't working correctly.
Try flashing stock rom with a goldcard....
Or do a task29 and flash stock rom again.
Ended up figuring it out finally, afew days ago, new HD2 should get here tomorrow. I ended up putting the HSPL back onto it, flashing a custom ROM, upgrading it via USB/boot loader screen to the stock ROM that it came shipped with then downloading tmobiles from their site and putting the update onto it and everything is currently as it should be. Radios, ROM and SPL
hai guys i hav got a htc hd2 and its in white screen
can any one plz help me to solve this problem
actually i'm new with dis pocket pc
here the info is.
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
did you do anything to your device ?
i'm asking because i have the same problem and didn't do anything at that time, i had a few freezes which forced me to remove the battery and now its stuck on the white screen, i can't flash anything either. I wasn't trying to either before this happened to me, i had winmo 6.5.x running for months, pretty much untouched since i only use android now.
.) i did a hard reset, which went really fast and did nothing.
.) tried hspl 3 ( it says succesfully flashed, but when i load the bootloader the previous version is being displayed there.
.) tried to flash:
-stock rom from sd, i get stuck in the bootloader "serial"
basicly it just does nothing...
i used a 2gb mirco sd card for that, formatted in fat32. stock rom extracted and renamed the RUU_signed.nbh to leoimg.nbh. volume down + reset
-stock rom from pc/usb connection, error/timeout at 0% saying connection problems.
im running out of idea's, i got 1 month warranty left, but im afraid that it will do me no good since i used hspl
You need to update your spl to 2.08.hardspl AND you mostlikely need to flash your radio as well.
I found out that i made a mistake while trying to flash from sd, i didn't put the leoimg at the root of the sd so it didn't get detected. I managed to get rid of the white screen after flashing but its nowhere near functional. It also gave me an error during the flash, but it carried on and finished the flash eventually...
Now when i boot winmo it says something about microp mismatch, i tried two different roms to make sure it had nothing to do with the rom i was using, it didn't... i had the same problem with both. So my guess is that something is damaged, at least hspl is gone now so i can make use of my warranty again, for the people that don't have warranty left i hope somebody comes up with a solution, if there is one, everything points to hardware damage from my point of view. Would be interesting to know how your problem developed...! anyway good luck
arminneman said:
I found out that i made a mistake while trying to flash from sd, i didn't put the leoimg at the root of the sd so it didn't get detected. I managed to get rid of the white screen after flashing but its nowhere near functional. It also gave me an error during the flash, but it carried on and finished the flash eventually...
Now when i boot winmo it says something about microp mismatch, i tried two different roms to make sure it had nothing to do with the rom i was using, it didn't... i had the same problem with both. So my guess is that something is damaged, at least hspl is gone now so i can make use of my warranty again, for the people that don't have warranty left i hope somebody comes up with a solution, if there is one, everything points to hardware damage from my point of view. Would be interesting to know how your problem developed...! anyway good luck
Click to expand...
Click to collapse
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
kabir.581 said:
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
Click to expand...
Click to collapse
Yeah sure i can do that, but before i do you need to tell me how you got that white screen in the first place. If it's not because of a failed flash attempt you probably want to keep your phone as it is now, so you can make use of your warranty... hspl makes that impossible!
It's probably a hardware problem, i looked up on that microp mismatch and it looks like a hardware failure, updating your software isn't going to solve that, it might solve the white screen issue, but the phone itself won't be functional. Try to explain what happened so i can give you proper instructions on what to do.
If you can start your phone and enter the bootloader there is no need to sent to service.
Enter bootloader and flash from there HSPL 2.08, and flash radio too.
After that flash MAGLDR and android rom.
guys as i have posted in my last post
that was a condition i have received from costumer.
i guess he tried to update it...
kabir.581 said:
guys as i have posted in my last post
that was a condition i have received from costumer.
i guess he tried to update it...
Click to expand...
Click to collapse
With the phone off, press and hold the Volume Down button and then tap the Power button.
You will get a multicoloured screen with the word 'Serial' at the bottom. What else does the screen display?
What country and phone operator is the phone locked to?
if you want to install a custom rom or eventually android you are going to need hspl, there are enough guides and tutorials on how to do that on this forum, search for it.
if you just want to bring the phone back to life, running windows mobile, you can go to the htc website. Go to the support section and select your phone and look for available rom updates for your phone/serial number.
connect your phone to the pc and follow the instructions of the setup and upgrade... if the phone doesn't get detected, extract ruu_signed.nbn from the setup file and rename it to leoimg.nbn
put that at the root of your sd card formatted in fat32 and boot your phone holding down the volume down button. Follow the instructions, when its done you can reboot the phone and hopefully you can make use of it
berbecverde said:
If you can start your phone and enter the bootloader there is no need to sent to service.
Enter bootloader and flash from there HSPL 2.08, and flash radio too.
After that flash MAGLDR and android rom.
Click to expand...
Click to collapse
Not really, i was able to do that and even flash an upgrade on the phone, but not without errors, the phone didn't function properly after the flash, so its very likely that something is damaged in my case. I send my phone to htc so they can repair it.
it displays the info
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
Flash a stock rom... in usb mode..
Sent from my HTC HD2 using XDA App
hey guys i tried to download rom from htc support area
but it asked me to enter serial num when i entered the
device serial it gives error.
The serial number you’ve provided appears to be invalid. Please try again.
could any plz tell me the exact procedure and the links to download
what ever it requires its just because i'm new with this softwares
here the info which i got from bootloader mode is:
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
If you want to install a stock rom you should know what kind of WM has your HD2.
You may not be able to flash any stock rom.There are a lot of versions, regions and it may take some time to try all of them.(http://shipped-roms.com/index.php?category=windows mobile&model=Leo)
If you do not know the version, as you say you have SPL 1.42.
If this is true you can change to HSPL and after that flash any rom you want, and android.
This should solve your problems.
So download the HSPL from the second post. (http://forum.xda-developers.com/showthread.php?t=611433)
Enter bootloader connect the USB cable and flash HSPL.Select 2.08 HSPL from the list.
If you succeed. If you check the bootloader you should see something like Cotulla HSPL 2-08.
Now you can flash any rom you want, the same way: download a rom of your choice, enter bootloader, connect usb cable and start the RUU utility.
If you want to flash android you have to upgrade the radio version.(the same way)
Flash MAGLDR.(the same way).
Flash android.(this is different).
If i am wrong, anybody feel free to correct me.
I would say also do a task29 that contains blank .nbh. you must have hspl 2.08 first to run this then install any custom ROM through PC or your branded ROM through SD card it should work. i hope this helps.
here you go
http://forum.xda-developers.com/atta...0&d=1268260144
dude it works thanks alot
and thanks to every one who has tried to help me
rgds 4m kabir.
Hello guys,
I have a question, lately I tried some different ROM's and also a Windows 7 rom. But after a while my touch screen stopped working, so I resetted my phone returned it to it's original state with the normal windows 6.5 rom and brought it back to the shop, although I forgot to change my HSPL.. Now HTC says that my guarantee expired due to me modding my software. Now there is another shop in my city that has a HTC repaircenter so I was planning on bringing it there, I restored it to the original HSPL, but when I try to update my ROM back to the STOCK rom it stays still on 0% while trying to update it. So I'm quite unsure what the state of my telephone is, wether my touchscreen is broken or not because if you could've seen the state my phone is in you would think it's brand new. So I find it hard to believe that my touch screen really broke since I never dropped it. If anyone could help me out what to do, because HTC send me a bill of €480,- if I want to repair that phone and that is outrageous ofcourse.
If anyone has any other idea's, how to get my stockrom back on or take it to another shop where they repair cellphone's, please enlighten me!
wrong stock rom often causes hang at 0%, you sure its the correct stock rom for your phone? cant just use any hd2 stock rom.
Yeah, I'm 100% sure it's the right stock rom.
when you say 'I restored it to the original hspl', , which spl did you set? (which spl shows in bootloader, now?) Also, what does teh top line of bootloader say?
Pb81100 hx-bc
spl-2.08.0000 8g xe
thats not a regular hd2 stock spl, that's only stock spl for tmous phones. send a regular hd2 back with that spl and they will know you've been hacking it.
assuming you don't have a tmous (hd2 model and full filename of any roms being discussed is always very useful in post 1), use hspl2 to set 1,66,0000 and try the sd card flash again. I've tried reverting to stock O2 UK rom from spl 2.08 in the past with the same failure. reverting to 1,66 and the flashing fixed it.
Alright, I've read on some forums that that was the right HSPL. Do you by any change have a link to that HSPL or can I just google it because I'd rather not download any risky files anymore since my phone is ****ed up as it is right now. Thank you so much for answering my questions mate, you've been a great help though.
Tombason said:
Alright, I've read on some forums that that was the right HSPL.
Click to expand...
Click to collapse
its the right 'spl' (its not an 'hspl', , , its an 'spl' ) for a tmous phone, ,
go get hspl2.exe from the hspl thread (or see links in my sig) run it, choose 1.66.0000 or 1.66.hspl
(unless you DO have a tmous? you haven't said, and its hard to tell if you're american or not, , you said 'cellphone', but alos 'shop' instead of store, so hard to tell, hehe)) , and i havent looked up the Pb81100 hx-bc code to check)
samsamuel said:
its the right 'spl' (its not an 'hspl', , , its an 'spl' ) for a tmous phone, ,
go get hspl2.exe from the hspl thread (or see links in my sig) run it, choose 1.66.0000 or 1.66.hspl
(unless you DO have a tmous? you haven't said, and its hard to tell if you're american or not, , you said 'cellphone', but alos 'shop' instead of store, so hard to tell, hehe)) , and i havent looked up the Pb81100 hx-bc code to check)
Click to expand...
Click to collapse
Oh my bad, I am from the Netherlands. Alright I'll try that, thanks for your help mate.
Alright, I got Windows Mobile running again. Thanks for that. Although my touch screen is still not working sadly enough.... Guess I'll have to pay a visit to a phonestore.
good to know for sure that 2.08.0000 prevents downgrading. confirmation is always useful.
Unlucky about the screen.
there is a method for reinstall the original radio or fake original radio? (i don't know if this is his name)..
i talk about...:
telephone just turn off -> press "call down/power down" + "vol down" and it's say me a HSPL eec ecc by cotulla...
now, i have reinstalled the WM 6.5 ROM because the android give me various problem... and this problems persist.. so i want send my telephone to repair because it is still in warranty...
they watch the radio installed? or provide only to repair the telephone?
thanks in advance.
are you on about getting rid of the hspl? you need to rerun the hspl and select the one that isnt hspl
where i can find the program for remove hspl?
on my screen it's written:
PB81100 SS-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
someone can help me please??
cuppa91 said:
there is a method for reinstall the original radio or fake original radio? (i don't know if this is his name)..
i talk about...:
telephone just turn off -> press "call down/power down" + "vol down" and it's say me a HSPL eec ecc by cotulla...
now, i have reinstalled the WM 6.5 ROM because the android give me various problem... and this problems persist.. so i want send my telephone to repair because it is still in warranty...
they watch the radio installed? or provide only to repair the telephone?
thanks in advance.
Click to expand...
Click to collapse
This will have already installed the correct radio
No, the radio isnt important for warranty, only that its a stock rom, and MOST IMPORTANT hspl is not there.
SO, depending what stock rom you flashed (since you didnt tell us) you need to run hspl.exe and set teh correct spl
SO, if you flashed stock rom version 3.14, you must run hspl4.exe and choose 3.03.0000
if you flashed any other version, run hspl2.exe and set 1.66.0000
If you have a tmous (t mobile USA) then use hspl4.exe to set 2.08.0000 or 2.10.0000 or (if you flashed ver 3.14 rom) 3.03.0000
thanks for support.. now... mmm... i not remember which stock rom i have installed on my HD2.. :s ... how can i see the number of the version?
i think is this:
RUU_Leo_S_HTC_ITA_3.14.408.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
but i have also
RUU_Leo_HTC_ITA_1.66.408.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
and not remember which i have installed.. sure, i have downloaded the first up.. but maybe, in confusion, i have installed the second... (it was on my pc since july)
ps
it's not tmobile , it's a normal version not branded by telephone companies.
it was buyed in Italy, so EU - not USA.
When the phone boots, and you get the splashscreen, look at the info bottom of screen, R G D that's the radio ver, rom ver and protocol (don't need this)
ok, here we are my screen:
R 2.15.50.14
G 15.42.50.11U
D 3.14.04666
what does it's mean? which hspl and what also i have to install? i'm really newbie about all this... thanks everybody 4 support
Compare the numbers to the numbers in the filenames you posted above.
Means you have rom 3.14, radio 2.15.50 and need spl 3.03.0000
so, now... my hd2 run already WM 6.5...
for install the spl i use hspl4.exe and i launch the application after reboot of telephone with power+vol down? i don't want destroy my smartphone
thanks
Yea, either from bootloader or from within running winmo, but I recommend from within bootloader, since there is less chance of USB timeout.
Don't worry so much, its pretty tough to brick a regular hd2 by flashing. Its the tmous that comes with an idiot kill switch, not the regular.
ok, i have done it!
when i start phone with power+vol down it's say to me, in the screen with the four colours:
PB81100 SS-BC
SPL-3.03.0000 X3
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
it's all ok? now can i send to repair the telephone with the warranty?
spl and OS are installed.
missing somewhat else?
thanks
yep that will do fine.
I think very hard to do
amatohd2 said:
I think very hard to do
Click to expand...
Click to collapse
what? i not understand
guys for send my phone in warranty i have to send also the SD card and the battery charger? or is enoghut the phone?
thanks
Just the phone, no cards, no sim, no charger.
OK so here goes,
I was trying to flash my HD2 with the latest ROM for my region using the SD card method as the USB port is not working, it will charge the phone but does not sync with the pc.
All was going well with the flash when all of a sudden the screen went black and since then I've had the following..
When I turn it on I get the triangle with the exclamation mark.
If I try to go into the bootloader I get the RGBW screen with
RUUNBH
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
then I get the white screen with
loading......
almost immediately I then get
00028002
Not allow
and then it goes back to the RGBW screen with the same information as before
Please Help!!!!
News Hound said:
OK so here goes,
I was trying to flash my HD2 with the latest ROM for my region using the SD card method as the USB port is not working, it will charge the phone but does not sync with the pc.
All was going well with the flash when all of a sudden the screen went black and since then I've had the following..
When I turn it on I get the triangle with the exclamation mark.
Click to expand...
Click to collapse
wrong rom for that phone. Needs to match operator too,(assuming its from an operator) and just cos the sim may be unlocked the rom is always locked. Flashing from SD removed hspl so now the rom checks fail.
If I try to go into the bootloader I get the RGBW screen with
RUUNBH
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
then I get the white screen with
loading......
almost immediately I then get
00028002
Not allow
and then it goes back to the RGBW screen with the same information as before
Please Help!!!!
Click to expand...
Click to collapse
Goes to loading cos leoimg is still on SD card. Since you don't have USB, you can now no longer flash hspl, so only sspl, so only winmo cooked roms, and no radio changes. Unlucky.
Is it bricked or is there a way of getting it to work again?
If I can get it back to some form of a functional phone 'er indoors will gladly use it.
Sure, find the right rom, example a German phone from o2 requires the 'o2 de' rom,, an unbranded one (from carphone warehouse for instance) would use the 'HTC wwe" rom.. etc etc.
Once you figure out which rom you need look for a 3.14 version and flash it.
Don't panic if you get what you got this time, that exclamation,just means you got the wrong rom. Try another one
(Edit - I was gonna mention SSPL but just remembered that it needs USB so your option is as above.... correct stock rom)
samsamuel said:
Sure, find the right rom, example a German phone from o2 requires the 'o2 de' rom,, an unbranded one (from carphone warehouse for instance) would use the 'HTC wwe" rom.. etc etc.
Once you figure out which rom you need look for a 3.14 version and flash it.
Don't panic if you get what you got this time, that exclamation,just means you got the wrong rom. Try another one
(Edit - I was gonna mention SSPL but just remembered that it needs USB so your option is as above.... correct stock rom)
Click to expand...
Click to collapse
This solution doesn't appear to work, I've tried every UK version of 3.14 from the HTC website and I've even tried the original 1.66.405.2 (all versions, obviously trying the WWE one first) all to no avail.
News Hound said:
I've even tried the original 1.66.405.2 (all versions, obviously trying the WWE one first) (
Click to expand...
Click to collapse
ALL 1.66 roms are unbranded, the branded 1.66 roms are version 1.72, so you haven't tried any operator branded 1.66 roms.