there is a method for reinstall the original radio or fake original radio? (i don't know if this is his name)..
i talk about...:
telephone just turn off -> press "call down/power down" + "vol down" and it's say me a HSPL eec ecc by cotulla...
now, i have reinstalled the WM 6.5 ROM because the android give me various problem... and this problems persist.. so i want send my telephone to repair because it is still in warranty...
they watch the radio installed? or provide only to repair the telephone?
thanks in advance.
are you on about getting rid of the hspl? you need to rerun the hspl and select the one that isnt hspl
where i can find the program for remove hspl?
on my screen it's written:
PB81100 SS-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
someone can help me please??
cuppa91 said:
there is a method for reinstall the original radio or fake original radio? (i don't know if this is his name)..
i talk about...:
telephone just turn off -> press "call down/power down" + "vol down" and it's say me a HSPL eec ecc by cotulla...
now, i have reinstalled the WM 6.5 ROM because the android give me various problem... and this problems persist.. so i want send my telephone to repair because it is still in warranty...
they watch the radio installed? or provide only to repair the telephone?
thanks in advance.
Click to expand...
Click to collapse
This will have already installed the correct radio
No, the radio isnt important for warranty, only that its a stock rom, and MOST IMPORTANT hspl is not there.
SO, depending what stock rom you flashed (since you didnt tell us) you need to run hspl.exe and set teh correct spl
SO, if you flashed stock rom version 3.14, you must run hspl4.exe and choose 3.03.0000
if you flashed any other version, run hspl2.exe and set 1.66.0000
If you have a tmous (t mobile USA) then use hspl4.exe to set 2.08.0000 or 2.10.0000 or (if you flashed ver 3.14 rom) 3.03.0000
thanks for support.. now... mmm... i not remember which stock rom i have installed on my HD2.. :s ... how can i see the number of the version?
i think is this:
RUU_Leo_S_HTC_ITA_3.14.408.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
but i have also
RUU_Leo_HTC_ITA_1.66.408.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
and not remember which i have installed.. sure, i have downloaded the first up.. but maybe, in confusion, i have installed the second... (it was on my pc since july)
ps
it's not tmobile , it's a normal version not branded by telephone companies.
it was buyed in Italy, so EU - not USA.
When the phone boots, and you get the splashscreen, look at the info bottom of screen, R G D that's the radio ver, rom ver and protocol (don't need this)
ok, here we are my screen:
R 2.15.50.14
G 15.42.50.11U
D 3.14.04666
what does it's mean? which hspl and what also i have to install? i'm really newbie about all this... thanks everybody 4 support
Compare the numbers to the numbers in the filenames you posted above.
Means you have rom 3.14, radio 2.15.50 and need spl 3.03.0000
so, now... my hd2 run already WM 6.5...
for install the spl i use hspl4.exe and i launch the application after reboot of telephone with power+vol down? i don't want destroy my smartphone
thanks
Yea, either from bootloader or from within running winmo, but I recommend from within bootloader, since there is less chance of USB timeout.
Don't worry so much, its pretty tough to brick a regular hd2 by flashing. Its the tmous that comes with an idiot kill switch, not the regular.
ok, i have done it!
when i start phone with power+vol down it's say to me, in the screen with the four colours:
PB81100 SS-BC
SPL-3.03.0000 X3
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
it's all ok? now can i send to repair the telephone with the warranty?
spl and OS are installed.
missing somewhat else?
thanks
yep that will do fine.
I think very hard to do
amatohd2 said:
I think very hard to do
Click to expand...
Click to collapse
what? i not understand
guys for send my phone in warranty i have to send also the SD card and the battery charger? or is enoghut the phone?
thanks
Just the phone, no cards, no sim, no charger.
Related
I have been told to send back my HD2 for repair by HTC as they said it is definetly faulty (Audio delay, delay dialing numbers, keypad slows down dramatically during sms typing).
Now I know as well as the rest of you, it's not faulty, it's just HD2's common problems, but they assure me they can send one out without these issues.
But before I send it off, can anyone tell me if this is a stock ROM etc. I've installed so much I can't remember what is stock & what is not lol.
Also, how can I remove HSPL if I have it installed, and how do I tell if I have?
Many thanks.
Ok, so I managed to check it by pushing the volume key down and resetting, this is the info it gave me:
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
Is this the version that comes with the phone or is it something I' ve installed?
Just so I don't invalidate my warrenty when I send it back?
I've found out how to remove it, but I there's no need if it's the one that came with my HD2.
Thanks for any help at all.
HTC_Junglist said:
Ok, so I managed to check it by pushing the volume key down and resetting, this is the info it gave me:
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
Is this the version that comes with the phone or is it something I' ve installed?
Just so I don't invalidate my warrenty when I send it back?
I've found out how to remove it, but I there's no need if it's the one that came with my HD2.
Thanks for any help at all.
Click to expand...
Click to collapse
That is something you installed ....
search and download HSPL3 run it, select sp1.42 or spl1.66(just changed this per sams post below) , that will remove HSPL and put it back to stock spl. It looks like the ROM is a stock one, but if you want to be sure after removing HSPL , download and install a stock ROM for your phone ...
stop, only tmous phones ship with spl 2.x, and an official tmous rom would fail to flash on your phone without hspl so they will know you've been tampering.
use hspl2 and choose either 1.42.0000 or 1.66.0000
the rom should be fine, it's hspl that is the deal breaker.
@watcher, you would be spot on for a tmous user
samsamuel said:
stop, only tmous phones ship with spl 2.x, and an official tmous rom would fail to flash on your phone without hspl so they will know you've been tampering.
use hspl2 and choose either 1.42.0000 or 1.66.0000
the rom should be fine, it's hspl that is the deal breaker.
@watcher, you would be spot on for a tmous user
Click to expand...
Click to collapse
@samsamuel I am glad you caught that, I had just answered the same question of a TMO user, and I guess my brain was stuck .... Updated my post
Thanks guys for your answers,
I don't know if this helps, but I am on Orange, I bought the phone on a 18 Month Orange contract from Dial a Phone, but in the phone identity page under "Model No" it says T-Mobile_LEO
Thanks again for all your help.
that's t mobile uk, though, same hd2 as all the rest. only tmo usa have a different phone.it will be fine with that wwe rom so long as hspl is gone
Thanks to both of you very much.
So this is what I now have:
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
I'm hoping this is as back to normal as I will get it, ready to send back to HTC now.
Again, thanks to you both, very much appreciated.
just realised you have a 50 radio installed, which are from tmous.not sure whether that's worth worrying about but for safety i'd re run hspl2 apply an hspl, flash a 51 radio then remove hspl again just like before.
i would probably go for 2.06.51.x radio or there abouts.
Okay, I'll try that now, thanks again.
Right, think I've done this ok.
So this is what I now have:
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
&
Radio: 2.06.51.07
sorted......
Sweet, thanks so much for all the help tonight mate.
Very much appreciated.
Just wonder if they really will be able to send it back without any of the issues I'm having, I really think they are just quirks of the HD2.
I've hard reset it now.
Just checked & I'm still getting the same issues:
Audio not in sync & delay in dialing when tapping a contact to dial, sms typing lags badly after typing about 30 words, built in youtube uploader not working & internet cutting out.
I very much doubt they can fix this, like I said, just seems to be too many peopple with the same issues, but they reckon they can, and they also guaranteed me it will only take 7 days (Again, don't think this will be the case).
They said they won't send a temp phone, but I'm arguing that at the moment as they told me it's a faulty phone.
We will see
Thanks again
heh, best of luck with that. and i think you're right, most of those issues are pretty much standard to a greater or lesser degree, some have them, some dont, some have some of them, some dont,,, its hit and miss, but hey, a second chance at a new phone is always a winner.
Yeah that's what I'm thinking, it's not going to cost me anything to get it looked at so if I end up with the same phone back I've not lost anything.
If I get a new one back it's a bonus.
I'll post back the results when I've sent it back & finally had it returned.
backing up original rom
hi all,
I just bought a TmoUS HD2 (ver details in signature).
Is there a tool with which I can create a image of(basically backup) my current ROM so in the event I land myself in trouble while experimenting I could revert back to the default/stock ROM n Radio?
Thanks
hai guys i hav got a htc hd2 and its in white screen
can any one plz help me to solve this problem
actually i'm new with dis pocket pc
here the info is.
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
did you do anything to your device ?
i'm asking because i have the same problem and didn't do anything at that time, i had a few freezes which forced me to remove the battery and now its stuck on the white screen, i can't flash anything either. I wasn't trying to either before this happened to me, i had winmo 6.5.x running for months, pretty much untouched since i only use android now.
.) i did a hard reset, which went really fast and did nothing.
.) tried hspl 3 ( it says succesfully flashed, but when i load the bootloader the previous version is being displayed there.
.) tried to flash:
-stock rom from sd, i get stuck in the bootloader "serial"
basicly it just does nothing...
i used a 2gb mirco sd card for that, formatted in fat32. stock rom extracted and renamed the RUU_signed.nbh to leoimg.nbh. volume down + reset
-stock rom from pc/usb connection, error/timeout at 0% saying connection problems.
im running out of idea's, i got 1 month warranty left, but im afraid that it will do me no good since i used hspl
You need to update your spl to 2.08.hardspl AND you mostlikely need to flash your radio as well.
I found out that i made a mistake while trying to flash from sd, i didn't put the leoimg at the root of the sd so it didn't get detected. I managed to get rid of the white screen after flashing but its nowhere near functional. It also gave me an error during the flash, but it carried on and finished the flash eventually...
Now when i boot winmo it says something about microp mismatch, i tried two different roms to make sure it had nothing to do with the rom i was using, it didn't... i had the same problem with both. So my guess is that something is damaged, at least hspl is gone now so i can make use of my warranty again, for the people that don't have warranty left i hope somebody comes up with a solution, if there is one, everything points to hardware damage from my point of view. Would be interesting to know how your problem developed...! anyway good luck
arminneman said:
I found out that i made a mistake while trying to flash from sd, i didn't put the leoimg at the root of the sd so it didn't get detected. I managed to get rid of the white screen after flashing but its nowhere near functional. It also gave me an error during the flash, but it carried on and finished the flash eventually...
Now when i boot winmo it says something about microp mismatch, i tried two different roms to make sure it had nothing to do with the rom i was using, it didn't... i had the same problem with both. So my guess is that something is damaged, at least hspl is gone now so i can make use of my warranty again, for the people that don't have warranty left i hope somebody comes up with a solution, if there is one, everything points to hardware damage from my point of view. Would be interesting to know how your problem developed...! anyway good luck
Click to expand...
Click to collapse
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
kabir.581 said:
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
Click to expand...
Click to collapse
Yeah sure i can do that, but before i do you need to tell me how you got that white screen in the first place. If it's not because of a failed flash attempt you probably want to keep your phone as it is now, so you can make use of your warranty... hspl makes that impossible!
It's probably a hardware problem, i looked up on that microp mismatch and it looks like a hardware failure, updating your software isn't going to solve that, it might solve the white screen issue, but the phone itself won't be functional. Try to explain what happened so i can give you proper instructions on what to do.
If you can start your phone and enter the bootloader there is no need to sent to service.
Enter bootloader and flash from there HSPL 2.08, and flash radio too.
After that flash MAGLDR and android rom.
guys as i have posted in my last post
that was a condition i have received from costumer.
i guess he tried to update it...
kabir.581 said:
guys as i have posted in my last post
that was a condition i have received from costumer.
i guess he tried to update it...
Click to expand...
Click to collapse
With the phone off, press and hold the Volume Down button and then tap the Power button.
You will get a multicoloured screen with the word 'Serial' at the bottom. What else does the screen display?
What country and phone operator is the phone locked to?
if you want to install a custom rom or eventually android you are going to need hspl, there are enough guides and tutorials on how to do that on this forum, search for it.
if you just want to bring the phone back to life, running windows mobile, you can go to the htc website. Go to the support section and select your phone and look for available rom updates for your phone/serial number.
connect your phone to the pc and follow the instructions of the setup and upgrade... if the phone doesn't get detected, extract ruu_signed.nbn from the setup file and rename it to leoimg.nbn
put that at the root of your sd card formatted in fat32 and boot your phone holding down the volume down button. Follow the instructions, when its done you can reboot the phone and hopefully you can make use of it
berbecverde said:
If you can start your phone and enter the bootloader there is no need to sent to service.
Enter bootloader and flash from there HSPL 2.08, and flash radio too.
After that flash MAGLDR and android rom.
Click to expand...
Click to collapse
Not really, i was able to do that and even flash an upgrade on the phone, but not without errors, the phone didn't function properly after the flash, so its very likely that something is damaged in my case. I send my phone to htc so they can repair it.
it displays the info
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
Flash a stock rom... in usb mode..
Sent from my HTC HD2 using XDA App
hey guys i tried to download rom from htc support area
but it asked me to enter serial num when i entered the
device serial it gives error.
The serial number you’ve provided appears to be invalid. Please try again.
could any plz tell me the exact procedure and the links to download
what ever it requires its just because i'm new with this softwares
here the info which i got from bootloader mode is:
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
If you want to install a stock rom you should know what kind of WM has your HD2.
You may not be able to flash any stock rom.There are a lot of versions, regions and it may take some time to try all of them.(http://shipped-roms.com/index.php?category=windows mobile&model=Leo)
If you do not know the version, as you say you have SPL 1.42.
If this is true you can change to HSPL and after that flash any rom you want, and android.
This should solve your problems.
So download the HSPL from the second post. (http://forum.xda-developers.com/showthread.php?t=611433)
Enter bootloader connect the USB cable and flash HSPL.Select 2.08 HSPL from the list.
If you succeed. If you check the bootloader you should see something like Cotulla HSPL 2-08.
Now you can flash any rom you want, the same way: download a rom of your choice, enter bootloader, connect usb cable and start the RUU utility.
If you want to flash android you have to upgrade the radio version.(the same way)
Flash MAGLDR.(the same way).
Flash android.(this is different).
If i am wrong, anybody feel free to correct me.
I would say also do a task29 that contains blank .nbh. you must have hspl 2.08 first to run this then install any custom ROM through PC or your branded ROM through SD card it should work. i hope this helps.
here you go
http://forum.xda-developers.com/atta...0&d=1268260144
dude it works thanks alot
and thanks to every one who has tried to help me
rgds 4m kabir.
Checked the other threads suggested but no luck
I have recently bought an HD2 WP6.5 which was unlocked by TMobile (UK) & subesquently debranded by me using Active Sync, HSPL2 & the LEO 1.66 RUU.
Everything seems fine but can I now upgrade to the new official 3.14? I have downloaded it from the HTC site but worried about damaging the phone.
Sorry if this is in the wrong place - I'm new to this sort of thing!
Thanks
hspl4 - 3.03.hspl - flash 3.14 rom from usb.
samsamuel said:
hspl4 - 3.03.hspl - flash 3.14 rom from usb.
Click to expand...
Click to collapse
Thanks for that
I'm not very technical - do you mean download HSPL4 then install 3.03 from that then flash 3.14, essentially the same as I did above but with the programs you indicated?
Thanks
Junks
EDIT: Just tried doing that & it did nothing.
Downloaded HSPL4 & ran it, tried to run 3.03 but it rebooted & still showing 1.66 - is this because I have 1.66.HSPL & not 0000?
Thanks
Phone into bootloader (power off, hold and keep holding volume down,tap n release power keep vol pressed till coloured striped screen, do all your flashing from here)
Into bootloader, connect USB, wait for word,"serial" to become "USB"
On PC,right click hspl4.exe and choose run as administrator,
What happens? What does it say in Bootloader? (Top line and spl line) before and after please.
Ah didn't know about that!
Right done that & it now says SPL-3.03.HSPL XE so obviously it did work as above I just didn't know how to check it!!
It shows:
PB81100 HX-BC
SPL-3.03.HSPL XE
0x05
Cotu11aHSPL 0x40
USB
So just run 3.14 on the PC now - do you have a link so I get the correct one?
Sorry to be a pain
Edit: This is the one I downloaded from HTC _HTC HD2_RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
That rom is 1.48,,, see the sets of numbers?
_1.48.405.2_Radio_Signed_15.28. 50.07U_2.05.51.05_2
Ver 1.48.405.2, with radio 2.05.51.05.
That's an ooold rom. There's at least 1 thread with all the 3.14 roms in it.
I saw that & thought it looked strange - put a WWE serial in the HTC & got that but I must have done something wrong as I've just done it again & the file now says 3.14!
Oh well all done now & seems to be working ok - thanks for your help, much appreciated
Just looking forward to using the phone now & ditching the annoying iPhone
Hehe it can be temperemental, bit like an 80's super car, terrible cars, but great none the less. I'm buying another for when this one dies.
Hey,
I've read around the forums for quite a while trying to work out how to downgrade my SPL from 3.03.000 to 2.08.HSPL. As from what i've read with the guides, to install a NAND android i must be on 2.08.HSPL. I've downgraded to Windows mobile 6.5 v1.66 but my SPL isn't changing.
Thanks in advance.
Did you try HSPL4.exe? Click!
cheers, i saw a post about HSPL3 and 4 but wasn't too sure what it did, just upgrading the radio now.
i've used HSPL4 to go to 2.08.HSPL but when i try to go to the 2.15.50.14 radio, it just hangs on the HTC booterloader screen, the guide says i have to use HSPL3. How do i go to 2.08.HSPL using HSPL3 from 3.03?
You can use hspl4, when instructions say things like "use hspl3" there is a good chance they were written before hspl4 was released. You cannot use hspl3 simply because it doesn't support 3.03.xxxx so can't change your spl.
Since you now have 2.08.hspl hspl3 will now work, however 2.08 from hspl3 and 4 (and hspl2 too) is identical, so there would be no point doing so.
You weren't very clear as to the problem you are getting, what do you mean by "it just hangs on the HTC screen", do you mean with the % progress page?biggest tip for flashing is always put the phone into bootloader manually before you flash. Many times the time taken for the phone to reboot itself into bootloader automatically is too long and the connection times out.
EDIT since you started with spl 3.... you must already have a compatible radio so don't need to change it.
Thanks for the replys, I've put my HD2 onto windows mobile 6.5 V1.66, with HSPL3 on 2.08.HSPL. Im trying to follow the NAND android tutorial here (http://forum.xda-developers.com/showthread.php?p=11097380) and put my radio onto 2.15.50.14, but everytime i start the .exe with the radio file my phone completes as if there is no error, reboots but hangs on the white screen with the green HTC writing and the red writing with the radio version etc. doesn't appear, i've tried waiting 30 minutes for it to appear but it doesn't seem to be working. Any ideas on what i might be doing wrong?
Never mind, i think the radio mirror i was using was faulty, its working fine now. Thanks for your time
I have the problem that i can not flash the Android NAND version.
I have the 2.08 HSPL and the 2.15.50.14 Radio.
I took MAGLDR113 and this is installed.
I choose point #5 "USB flash", started the DAF.exe on my Windows XP machine (i am admin) und it tells me it gets no connection.
What can i do?
hi there i also try to install nand adroid my boot screen reads like this pb81100 HX-BC
spl-3.03.hspl xe
0x05
cotullahspl 0x30
can i install nand android ???
Nandroid will ONLY work with 2.08.hspl, you have 3.03.hspl, have a guess.....
OK so here goes,
I was trying to flash my HD2 with the latest ROM for my region using the SD card method as the USB port is not working, it will charge the phone but does not sync with the pc.
All was going well with the flash when all of a sudden the screen went black and since then I've had the following..
When I turn it on I get the triangle with the exclamation mark.
If I try to go into the bootloader I get the RGBW screen with
RUUNBH
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
then I get the white screen with
loading......
almost immediately I then get
00028002
Not allow
and then it goes back to the RGBW screen with the same information as before
Please Help!!!!
News Hound said:
OK so here goes,
I was trying to flash my HD2 with the latest ROM for my region using the SD card method as the USB port is not working, it will charge the phone but does not sync with the pc.
All was going well with the flash when all of a sudden the screen went black and since then I've had the following..
When I turn it on I get the triangle with the exclamation mark.
Click to expand...
Click to collapse
wrong rom for that phone. Needs to match operator too,(assuming its from an operator) and just cos the sim may be unlocked the rom is always locked. Flashing from SD removed hspl so now the rom checks fail.
If I try to go into the bootloader I get the RGBW screen with
RUUNBH
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
then I get the white screen with
loading......
almost immediately I then get
00028002
Not allow
and then it goes back to the RGBW screen with the same information as before
Please Help!!!!
Click to expand...
Click to collapse
Goes to loading cos leoimg is still on SD card. Since you don't have USB, you can now no longer flash hspl, so only sspl, so only winmo cooked roms, and no radio changes. Unlucky.
Is it bricked or is there a way of getting it to work again?
If I can get it back to some form of a functional phone 'er indoors will gladly use it.
Sure, find the right rom, example a German phone from o2 requires the 'o2 de' rom,, an unbranded one (from carphone warehouse for instance) would use the 'HTC wwe" rom.. etc etc.
Once you figure out which rom you need look for a 3.14 version and flash it.
Don't panic if you get what you got this time, that exclamation,just means you got the wrong rom. Try another one
(Edit - I was gonna mention SSPL but just remembered that it needs USB so your option is as above.... correct stock rom)
samsamuel said:
Sure, find the right rom, example a German phone from o2 requires the 'o2 de' rom,, an unbranded one (from carphone warehouse for instance) would use the 'HTC wwe" rom.. etc etc.
Once you figure out which rom you need look for a 3.14 version and flash it.
Don't panic if you get what you got this time, that exclamation,just means you got the wrong rom. Try another one
(Edit - I was gonna mention SSPL but just remembered that it needs USB so your option is as above.... correct stock rom)
Click to expand...
Click to collapse
This solution doesn't appear to work, I've tried every UK version of 3.14 from the HTC website and I've even tried the original 1.66.405.2 (all versions, obviously trying the WWE one first) all to no avail.
News Hound said:
I've even tried the original 1.66.405.2 (all versions, obviously trying the WWE one first) (
Click to expand...
Click to collapse
ALL 1.66 roms are unbranded, the branded 1.66 roms are version 1.72, so you haven't tried any operator branded 1.66 roms.