Related
Hi all,
i've got a slight problem with my XDA. After updating to WM 2003 (4.00.16) my GSM (3.23) seens to be broken...
It woked for a while and then out of nowhere. My XDA now wont boot. Th good news is that i can go into the bootloader.
What can i do now? Where can i get a good WM2002 image to put onto my SD Card? I'd appreciate any help!!!
Dear Fabi,
I know it might not be the suitable question, but could you plz tell the exact steps you did that led you to this situation. This is to allow you to get precise help, and to be a learned lesson for the rest of us, coz I was about to upgrade from 3.25 to 4.00.16 but prefered to ask first.
Don't worry, the guys here are way clever and I 'm sure you will get the help very soon ... TKR
Nooo problem. I was about to Sync my XDA via USB Cradle and noticed that my backlight was turned off. Also my Phone was searching for a Network (now I know why... :roll: ). So I thought it might be good to reset that thing..... *aghhhrrrr* That was a big mistake. After the reset I saw the boot screen and the backlight blinking twice. That was all. My Bootloader (5.15) says "GSM Error"... now I'm without Mobile Phone for a while :?
so in other words, 4.00.16 was OK but you screwed up the XDA by just doing a reset while the backlight was off ?? ... I 'm afraid I don't get it :?
Fabi said:
Hi all,
i've got a slight problem with my XDA. After updating to WM 2003 (4.00.16) my GSM (3.23) seems to be broken...
It worked for a while and then out of nowhere. My XDA now wont boot. Th good news is that i can go into the bootloader.
What can i do now? Where can i get a good WM2002 image to put onto my SD Card? I'd appreciate any help!!!
Click to expand...
Click to collapse
Confirming you used the SD card method to upgrade, right!
Also what radio band is or was your XDA set to before the upgrade?
HTH
No I didn't use SD Card to update my XDA. I used The ROM-Kitchen to generate a exe and updated over USB cradle.
Im running my MDA (i don't have a XDA ) on a german GSM 1800. Eplus. It was always set to this option and I never even tried to change it.
@biso007:
I screwed my MDA because I did a reset. Thats right. But I had some backlight issues in the past few days after upgrading. The backlight sometimes turned off and there was no chance to get it back on... only a reset. I first thought the proplem occured again yesterday but then i saw that my MDA was looking for network. After resetting the GSM part was dead....!
So back to my problem. I now ordered a SD Card Reader/writer. Is it possible to resore my system via XDArit and a backup? Can someone provide me a working 2002 backup from boot, OS and GSM part? Or can I do this by myself. I really appreciate your help!! Thanks a lot.
Ok I see!
Do this then press the green phone button, tools, Options, Band
and post whats listed.
and yes its possible to restore your system via XDArit and a backup.
As far a the 2002 PPCPE ROM goes you should be able to download it from T-Mobile, so visit their web site and search their MDA upgrade/download section.
HTH
Qman said:
Ok I see!
Do this then press the green phone button, tools, Options, Band
and post whats listed.
HTH
Click to expand...
Click to collapse
My MDA does not boot anymore! I can't get into windows and i can't sync anymore! I have the Radiostack and the 2002 image fram the T-Mobile Website but the image ist a NK.nbf. AFAIK XDArit needs *.nb1 Files? I also noticed that it seems not possible to write the GSM Part to the phone via XDArit.
Hiya Folks
I wonder if you could helpme with a bit of a problem, i have recently attempted to upgrade my XDA using the reccommended downloads from O2, this upgraded my ROM and the GSM part of the XDA. however when trying to get into my XDA it freezes, i can get into the bootloader but get a GSM error, am i able to flash the GSM, if so where can i get the flash and how would i carry this out. i have got into the GSM part of the bootloader and the GSM will not turn on. i have tried copying the GSM from a friends XDA only to find the message "please connect to RS232 and run PC monitor now"
Hope you can help
Cheers guys, you are truly more useful than the folks who we obviously look up to at O2!!!! Mind you this does not say much!!
Thanks again
Dave
where can i find the wm 2003 upgrade file for qtek 1010
where can i find the wm 2003 upgrade file for qtek 1010.
plz can any body reply to me at [email protected]
i want to upgrade my qtek1010 2002 wm to 2003 but could not find it .
can any body reply to me at my email
Hello i've got an Wallaby from O2 ..
I want to format my divice so i can reinstall the most needed things on it.
But my problem is witch programs i must use?
And witch ROM i'll have to get for the new software so i can use my GPRS, for T-Mobile ?
So witch ROM program/install (because he must first be totally clean before i go on)..and how can i reformat my O2 Wallaby XDA ppc PW10A1 ??
Please help! I've got a dockingstation so help me with some links...
....anyway! Please help me! I'm dieing for some information !!
It's not possible for me to get on the GPRS.
Greetz,
PaSo
You get a clean ROM by doing a hard reset. Then only programs already included in theROM will be onyour device.
Stefan
but that's the problem !!!!
It's an o2 device and i've got a T-Mobile sim-card in it.
And i want to go onto the GPRS-Network, but that isn't possible because the ROM on the device blocks that.
So can i put an other ROM on it ??
New update or something ??
You can flash a T-Mobile ROM on it.
BUt i do not believe that the device blocks just GPRS. Have you done correct settings for T-Mobile? Is the sim card working in the device (Phone)?
Stefan
My sim is working ok. I can call and sms to other people.
Ok. Can you tell me how to flash my XDA... with new software?
Because i want to delete all, format complete and reinstall new working software for every simcard.
So i can use him!!
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashActiveSync
http://wiki.xda-developers.com/index.php?pagename=ROMVersions
http://wiki.xda-developers.com/index.php?pagename=ROMkitchen
hmm i'm not that intelligent to use these programs.
I don't know how i can flash the device.
What must i do ??
It should work to download a ROM in EXE format, connect your device to your PC running active sync and run the Exe-File....
Stefan
It workd, i've got a new ROM onto the divice.
The one of xda-developers self.
Now i've got to get the right settings for TMobile.
Thanks anyway.
And maybe next time.
Can anone tell me how i could unlock my wallaby lock on T-mobile?
i have already upgraded the ROM to 4.01.12
and radio to 4.21.00
protocol version is 32S54... but get Unlock Code screen everytime i insert my simcard...
please please please, im begging.... i read one article explaining about SpecialEditionROM but the link is dead... any option pls.???
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
T-Mobile Unlock
Lumpi,
I, too, have T-Mobile that I need to unlock. My problem is that I can't figure out how to install the XDA ROM that allows the unlock--the link at the bottom of the XDA page doesn't work.
Skip A
http://wiki.xda-developers.com/index.php?pagename=Wallaby
I can't open the step by step instructions for installing 'special edition 1.2'.
Some Wallabys don't support the GSM network that T-Mobile uses (at least in the UK), so if your phone works with other SIMs from Vodafone/O2 then chances are it will never work with T-Mobile. In this case, it's a hardware limitation and there is nothing that can be done about it.
Dear Stefan I want to meet u in person in stuttgart
LumpiStefan said:
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
Click to expand...
Click to collapse
Dear Stefan i will be in stuttgart for a church conference from 3 april to 12 april.
I have t-mobile wallaby PW10B1 ROM 4.02.04 eng 8/24/05 radio 6.18.00 protocall version 324e4. I am unable to unlock using xdadev_all_unlock.exe they give errors.the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working. can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
kjpeter said:
I am unable to unlock using xdadev_all_unlock.exe they give errors.
Click to expand...
Click to collapse
This is the wron tool. That does not work on the Wallaby device.....
kjpeter said:
the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working.
Click to expand...
Click to collapse
I think you´re concerning on, that the link for downloading is not working...
Try this one: ftp://xda:[email protected]/Wallaby/ROM/Special/special_rom_1.2.exe.zip
kjpeter said:
can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
Click to expand...
Click to collapse
GPS-receiver should be no big problem. It should be a gps-receiver with PS2/serial-Connector. Any USB wouldn´t work....
How dou you want to conenct a camera?
If you didn´t get the unlocking worked, we can try if we can make a meeting when you are in Stuttgart, than i will take a look at it....
Stefan
I downloaded SE rom 1.2 and when i run exe in dos window i have a message - ERROR GetConnectionType.
i used activesync 4.5 beta on xp .
(actually i had activesync 3.5 on my xp pc but on wallaby-activesync itsays incompatible activesync .so i changed from 3.5 to 4.5 beta )
any help stephen?
how to upgrade the activesync in my pda?
you dont
upgrade it
Try using the 3.7 or the 4.0/4.1 Version of Active Sync.....
Stefan
xda2unlock
I put in boot loader mode the pressing left side sound control switch put it in to USB flash mode and ran xda2unlock.exe at desktop got XP shutting down that xda2unlock.exe. at that time i put active sync USB on stop. couldnt do any thing.
while try once i saw serial rs232 on wallaby screen i dont know how to acivate it again and try abouve procedure.
is there any other way to unlock my mobile.?
I want to connect to gprs and browse net.
wallaby unlock
i was finnally able to unlock mine yesterday (02/25/07) but you need to change 2 things before being able to use the unlocker.exe program . first you wont be able to do it via the usb connection it just wont work due to the rom currently installed use the sd mem card method to flash the rom using a card reader and OSIMagetool.you need to change the rom to the ROM: 3.17.03 ENG (XDA special edition) you need to do this so you can flash the radio and the current rom wont allow you to do it and then change the radio to version to Radio: 6.24.00 (mine was 6.25.02 and its whats not allowing the unlock to work ) then the unlocker.exe will work . the instructions are on this url http://www.romkitchen.de/tools/manual2_unlock.htm and the software i used is on this url http://www.romkitchen.de/tools/form.php .The instructions here changed the boot loader but it wasnt needed to get my phone unlocked you can probably skip that step also . good luck
Please, link is not working
The link ftp://xda:[email protected]_1.2.exe.zip is not working anymore.
Could someone please, point me in any other direction I can look for?
Thank you very much.
Manuel J.
P.S. Still searching
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
LumpiStefan said:
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
Click to expand...
Click to collapse
Thank you so much.
Manuel lJ.
want to meet u in stuttgart
Dear lumphistephen i dont know your personel mail id so this message ,i am reaching stuttgart on 2 april will be there till 15th april for church confernce how can i contact u there?
My Host Mr.Gunter Janzens phone number 0711-4579360 or 0711-457790 or 0175 689 5555 (mobile).Also u r welcome for the meetings where friends from all over the world come there for christian fellowship.can u please
give personel mail id .mine is [email protected]
Himupgradeit can't see my device. It gives information that it upgrades to such version (2.06), but what current version it doesn't show. Also native ROM upgrader displays information about current version and upgrades significantly. I tried 2 ROMs and no one can't see my PPC except native one
mente said:
Himupgradeit can't see my device. It gives information that it upgrades to such version (2.06), but what current version it doesn't show. Also native ROM upgrader displays information about current version and upgrades significantly. I tried 2 ROMs and no one can't see my PPC except native one
Click to expand...
Click to collapse
When you upgrade, you know (normally) what's the actual version on your pda, so who cares if the himaupgrad... doesn't show it. All you want is to do the upgrade, so do it!
BTW, what do you mean by "no one can see my PPC", if you have a RUUlog.log file containing on first line : "hh:mm:ss Connection with USB", then you know that it sees your PPC.
Cheers,
.Fred
You see, it's not the only one problem. Also when I press Update it displays me progressbar, but nothing continues. Then the error displays without any number - just can't connect. The native firmware upgrades normally.
P.S. Sorry for my ugly English
mente said:
You see, it's not the only one problem. Also when I press Update it displays me progressbar, but nothing continues. Then the error displays without any number - just can't connect. The native firmware upgrades normally.
P.S. Sorry for my ugly English
Click to expand...
Click to collapse
Allright, did you put your ppc in bootloader mode ?
Press Power button and DPad together and when pushing put the stylus in the reset hole. Normally your screen should become black, you should see Serial appear and a number like 1.06
If you have that, kill ActiveSync processes running on your pc then put the ppc in its craddle, Serial should become now USB. Launch the Himaupgra...
Cheers,
.Fred
Thanks, it works. I didn't know, that I need to put in bootloader mode
mente said:
Thanks, it works. I didn't know, that I need to put in bootloader mode
Click to expand...
Click to collapse
Always read the instructions before doing an upgrade. If you don't you could damage your ppc and have a dead one.
Cheers,
.Fred
Thanks. One more question. What version of 03Se better to install? I have downloaded 2.06 XDA2 version. It writes me, that I have wrong model
mente said:
Thanks. One more question. What version of 03Se better to install? I have downloaded 2.06 XDA2 version. It writes me, that I have wrong model
Click to expand...
Click to collapse
Good question! But I think this one should work:
ftp://xda:[email protected]/Himalaya_SEs/Himalaya_SE_2.06.00_Imate/
And I would take the Extrom xda2jojo.v3.2zt from great xda2jojo!
Cheers,
.Fred
Thanks, but where I can find tips how to install? I suppose each version of 03se needs different type of installing
mente said:
Thanks, but where I can find tips how to install? I suppose each version of 03se needs different type of installing
Click to expand...
Click to collapse
There is a big difference when you upgrade from WM2k3 to WM2k5 or downgrade from WM2k5 to WM2k3 but between same OS, nothing changes!
Cheers,
.Fred
So just launch himupdate?
One of the archives which links you gave me is broken
I am running a rom "[ENG}6.5.5 (23563)+Sense 2.5(2012) v0.014.7 (07/05/10) Radio 5005.1700.05 " of my tgo1, but i got some problems....
1. I can't get any information of My Location
2. I only can arrive the Marketplace in USA although i am in HK
3. I can't connect to the internet sometimes
This is my first of using windows mobile and sense, may I get the instruction in detail?? THX