Please Help - How to take apart HTC Aria? - HTC Aria Q&A, Help & Troubleshooting

I have a HTC Aria that I got for free because the phone is broken. I'm trying to find out if anyone has any tear down guides on this phone or done it themselves.
I've taken apart a lot of phones in the past with no issues but I like to have some guidance in this area if possible. Thanks

Related

[Q] S-OFF?

Hi,
I am a NOOB at android - the Jetstream being my 1st android device. Have come across some queries and was hoping that more experienced users and developers would be able to clear things out and may be even help us move further with our device - while HTC seems to have abandoned us more or less. To my understanding, getting S-OFF would enable us to write or mount any rom from any carrier onto our devices without the issue of having problems with compatibility, etc. Achieving root was the 1st step towards that. It would enable us to literally port another devices rom onto our device. Am I right?
It seems that Unknownforce and some others (sorry for not having mentioned them all as the list seemed quite exhaustive) have managed to downgrade their HBOOT to 1.50 on their HTC EVO 3D, and from there managed to achieve S-OFF which earlier seemed un-achievable with the newer version of HBOOT that HTC has been rolling out with their devices. Link is:
http://forum.xda-developers.com/showthread.php?t=1547695
So, want to ask/request anyone if they would know if this procedure could be applied for the Jetstream as well and enable us to get S-OFF? Could anyone please help figure this out or help point us in the right direction?
Thanks to all who help out.
I am convinced that the development for Jetstream has reached its end, if it really got going. There are two or three ROMs. There just wasn't a community for the jetstream to gain enough interest and momentum for ROMs and Mods. The attention that it did get here was due to the ~$1,000.00 bounty that was on it for Rooting. All all attention will be on the ONE series in a few weeks.
I use my Jetstream daily. Wish it had a better presence in the android world as its such a beautiful device. But, I would love to see more development, just not on the edge of my seat expecting it.
If we could get some people with the device to volunteer and work with it for some development, it would be really good. I for 1 am willing to help any way I can with whatever limited knowledge I have. As Task650 has the device, we.could perhaps ask him for help/help him out. May be if we could get this method of s off to work, things could change. Now that the device costs lesser also, it may be hope for change for the better.
Sent from my HTC PG09410 using XDA
I own a jetstream too. Bought 900usd without contract. I love it but hope there will be ics soon. I really want to s-off this device as I mantioned in several topics here. Hope someone do it.
feherhollo said:
I own a jetstream too. Bought 900usd without contract. I love it but hope there will be ics soon. I really want to s-off this device as I mantioned in several topics here. Hope someone do it.
Click to expand...
Click to collapse
We all hoping for it. If some dev could look into the method used to get the EVO 3D S-OFF and see if it is sound or would be able to work or something, may be we could move it further. I for one am a NOOB with no knowledge whatsoever about coding, programming and the sort. So can not make head or tail of the logic behind it. Link again is: http://forum.xda-developers.com/showthread.php?t=1547695
So I PMed Unknownforce who is the creater for the thread I shared on the 1st post. His process for obtaining s-off as he said could work for an emmc device. I am unsure if the Jetstream is such a device but I think it probably is. Next, the hboot basically determines how the device accesses its partitions and is unique for each device. Hence, we can not flash the hboot of flyer or another device onto the Jetstream and try patching from there. He said it may work if the chip used is the same, but he wasn't too sure either. So, it means that we will have to figure out another way to obtain S-OFF. Anyways, we can hope that it will happen. And thanks to Unknownforce for taking time to answer some questions and trying to help out.
Sent from my HTC PG09410 using XDA
Can someone please give me a good quality photo of the sim/sdcard area of a Jetstream with the cover removed, thanks.
globatron said:
Can someone please give me a good quality photo of the sim/sdcard area of a Jetstream with the cover removed, thanks.
Click to expand...
Click to collapse
Here are the pictures. Hope this is what you wanted. Have blacked out the IMEI number and stuff which is seen.
Edit: Couldn't upload better resolution pictures due to size constraints. have sized them down. if you need better resolution pictures, will email them to you if needed.
globatron said:
Can someone please give me a good quality photo of the sim/sdcard area of a Jetstream with the cover removed, thanks.
Click to expand...
Click to collapse
By the way, what the pictures for?
globatron said:
Can someone please give me a good quality photo of the sim/sdcard area of a Jetstream with the cover removed, thanks.
Click to expand...
Click to collapse
Hi, you asked for the pictures. I have posted them but don't know if this is what you meant or you needed something.else. also, don't know what you needed them for. If you could please share what your plans are it would be much appreciated. Thanks for the reply in advance.
Sent from my HTC PG09410 using XDA
globatron said:
Can someone please give me a good quality photo of the sim/sdcard area of a Jetstream with the cover removed, thanks.
Click to expand...
Click to collapse
Does anyone know how to contact globatron? He asked for these pictures for a reason I think. However have not heard from him or anything else whatsoever. We can't pm him so any alternate modes of contacting him to know what his plans were/are and if any development on that till now?
He has been able to figure out new method to obtain S-OFF for devices. So perhaps it would work for Jetstream too?
Sent from my HTC PG09410 using XDA
I read about the "Juopunutbear S-OFF" at http://www.xda-developers.com/andro...ht-juopunutbear-s-off-most-htc-2011s-line-up/ and it seems that what globatron would be looking for is probably the pictures of the board without the overlying plastic. The procedure involves a wire trick. So for that, I think he would require a pciture with the back removed, the screws undone. Unfortunately due to exams I am unable to devote much time for the next few weeks. Could anyone please check it out and post the pictures he actually requested for?
Thanks in advance and hope that he would be able to do something with them and get us S-OFF.
globatron said:
Can someone please give me a good quality photo of the sim/sdcard area of a Jetstream with the cover removed, thanks.
Click to expand...
Click to collapse
Hi, there is 1 Lucky person with an S-OFF Jetstream - BIGMOH. Is it possible to know what the difference is between his and our devices and thereby work backwards to gain S-OFF for us too? I did PM him and he has agreed to help us out the best he can. Neither do I nor does he have much of a knowledge about all this. Could some developer please help us out? DoomLord? Task650? Globatron?
Sent from my HTC PG09410 using XDA

[Q] Off topic ReZound, on topic HTC

Just a quick question, my friend has a htc phone, he has the evo 4g.
Is the unlocking process the same on all htc phones. For example, does he just fastboot and find the long key like i would or will it be different. Any help appreciated. Hees new to android but know of all the things you can do with s-off and root. He wants to join into the fun and stuff. He is specifically asking for my help because he knows about the program that i made.
I haven't the slightest idea, but Id check the evo forums.
Sent from my ADR6425LVW using Tapatalk 2
Essentially you are right, but remember HTC Dev is not preferred due to tracking potential and warranty worries. If you're going S-off these methods vary phone by phone, and some phones do not even need Dev Unlock to accomplish this. Research each HTC phone's forum.
Assuming you specifically mean the ol' EVO, not the new LTE, you can use Revolutionary:
http://forum.xda-developers.com/showthread.php?p=9662934

[Q] NEED HELP!! Evo 3d to boost mobile.

Hello,
I have been trying hard for the past week and the result is tha I now have a phone that doesn't work. I can assure you that I have tried hard to do my best to research this before I came asking for help.
But all the info I have compiled is mostly out of date, or gives instruction for the evo 4g and not the 3d, or is incomplete.
To help you guys understand where I'm at. I already have an sanyo incognito and have got most of the relevant information from it. Its also activated and on the boost network.
I also purchased cdma workshop already for 108 bucks. I know am at the part where I have to find the esn and meid numbers on the 3d but no matter what I do i keep getting and error saying the address is out of range.
I have read on forums on this site where people were saying to just buy cdma workshop rather than using copies that were downloaded from elsewhere and that it made the process so easy and now I feel that I may have wasted money for no reason. Please if anyone would be so kind as to really help me out. I would greatly appreciate it.
Well scratch that. I got voice and 3g and 4g plus text to work. Only issue now is mms.
Scratch that again. Solved the problem. Issue was just old info. Well lol I guess I didn't need help after all.
But if I can help anyone else out let me know. Might even make a guide......
mensashi said:
Scratch that again. Solved the problem. Issue was just old info. Well lol I guess I didn't need help after all.
But if I can help anyone else out let me know. Might even make a guide......
Click to expand...
Click to collapse
I would love to see a guide. It is nice when someone who had all the issues makes a guide to avoid them .
mensashi said:
well scratch that. I got voice and 3g and 4g plus text to work. Only issue now is mms.
Click to expand...
Click to collapse
i would appreciate it if you can show me how to get my 3g aka data to work
i got calls and text to work and mms but i cant get data to work
send me a pm please thanks ill appreciate it
i have a htc evo 3d guide to flash that i found on a diff forum but i cant get the 3g data to work

Any up-to-date guides on rooting/romming Hero S?

I've spent the last few days trying to figure out how to root and rom my US Cellular Hero S and all I can find are hard to follow guides scattered around various non-xda forums. Since the phone never saw any 'official' support at XDA it was basically sent to the graveyard and never got the level of support that something like my captivate had. Because of this I'm having trouble figuring out what root method is best, a step-by-step guide to that method, and what roms are available for me to use.
Could anyone give me a hand with this? The only reason I am replacing my cappy with this hero s is because my cappy has an unfixable SoD issue and the hero s is a slightly better device.

Unflashing--Page Plus Activation

I have searched in every possible way to find the info but just not finding quite what i am looking for, my apologies is i am simply experiencing temporary stupidity or inability to manage a search engine.
Having to go back to an old device until able to replace a lost phone. It is an Incredible 4g which was flashed to page plus years ago, when only 3g was available. seeing where they state that these devices require unflashing, which i have never heard of. could anyone please share any info, rumors or whatever you got that may help.
Thanks
shorty1993 said:
I have searched in every possible way to find the info but just not finding quite what i am looking for, my apologies is i am simply experiencing temporary stupidity or inability to manage a search engine.
Having to go back to an old device until able to replace a lost phone. It is an Incredible 4g which was flashed to page plus years ago, when only 3g was available. seeing where they state that these devices require unflashing, which i have never heard of. could anyone please share any info, rumors or whatever you got that may help.
Thanks
Click to expand...
Click to collapse
Is it S-OFF? If so, might be able to easily nuke it back to zero with an RUU and start over. If not, check the baseband version and follow the easiest method to achieve S-OFF.

Categories

Resources