Related
Plz guide me how to hardreset in himalaya 2005?
in the bootloader you format chipOnDisk and it's hardreset
why don't you ask it in WM2005 forum.
Press Note and Camera buttons the hit the softrest.
Hi everyone, i'm looking for help again
This time, i've flashed to AKU PDAVIET and when i loaded (windows screen) the Upgrade.bat, the MS DOS command bugged after some time and now the S200 won't boot.
I just got the start menu with the version of ROM, EXT ... the wallpaper by Orange but it won't go any further.
I can't find any active sync connexion (hard reset does not help)
Does anyone know what to do to PLZ ?
go to the boatloader (reset while holding camera button) and try flashing again
THKS will try that tonight.
Now i remeber that i had do it with my Himalaya
did you downgrade to WM5 before flashing?
Nop i upgrade to AKU 2.2 and then i try to run the upgrade.bat wish work for a time...
MY Hermes was dead after upgrad to WM6 PRO 3.54c ROM
--------------------------------------------------------------------------------
Please help!
i upgraded my hermes to WM6 PRO 3.54c ROM. the phone operated well in the begining. however, when i was access the Today Music Plug-in, the phone was reboot by itself then could not entry wm 6 again (can not pass the wm6 green page and reboot and reboot again)
please help me
Hi,
The same thing happened to me with 3.43c. The only way I got passed the WM screen was to hard reset it. Give that a go and see if it helps.
Cheers
Subzuk
subzuk,
could you please tell me in detail how to fix this problem
because i have tried to hard reset my Hermes but in vain
(hold the OK, Power On and reset)
thx
siulung
siulung said:
subzuk,
could you please tell me in detail how to fix this problem
because i have tried to hard reset my Hermes but in vain
(hold the OK, Power On and reset)
thx
siulung
Click to expand...
Click to collapse
Why not try to reflash the OS again?
read the WIKI:
http://wiki.xda-developers.com/index.php?pagename=Hermes_For_Beginners#hardreset
Hi siulung,
I believe that you do this by pressing both of the soft keys to the left and right of under the screen and press reset.
Cheers
Subzuk
Siulung,
I would not do any more until you have done a serious amount of reading. The wiki link in the previous post is a good start.
Good luck.
WB
hi,
i solve my Hermes problem by hard reset it again
thank you for your help
siulung
Hi people,
I'm Luca from Italy, and I'm writing here hoping that You can help me to recover my dead PPC.
My PPC, when living, had Windows Mobile 5 like O.S.
So, As i've some problems with the phone I've decided to downgrade the radio version from 1.17 (people say that it is buggy) to 1.08.
So i run the HimaUpgradeUt_noID (I've also HimaUpgradeUt), but i've forgotten to delete the NK.nbf file from the directory.
I put the PPC in bootloader mode (SERIAL on top and ver. 1.06 on bottom) and then to the cradle directly to the motherboard USB connector
The sofware begin to update upgrading even ROM CE file, but when it arrived at 31% himaUpgrade stopped its work, showing that I need to reset (only normal reset and not soft reset) the PPC From this time until now my PPC show always and only the bootloader view.
When I try to upgrade again, the himalaya soft don't show what my PPC has like rom or radio version. It shows only the Ce rom and Radio that I'm going to ugrade.
It seems that software isn't able to erase ROM IMAGE
Active sync can't identify the device (some time it is indentified as unknown device).
When i start the software for ugrade the Active sync tray icon disappear.
I'm only able to ugrade radio stack or ExtRom.
PLEASE PLEASE PLEASE, HELP ME.
P.S. The device is unlocked
2 hits
http://www.expansys-kr.com/ft.aspx?k=21161
"Edited:- Problem solved, I loaded the upgrade from a different PC. I don't know why my main PC would not work as that is the one I regularly sinc the pocket PC to, but it just kept aborting the upgrade. Anyone else having this problem, try another PC."
if you're lucky
http://forum.xda-developers.com/sho...t=Failing+ROM+Update+Jam.+Error+112+CE+Failed
"it was stoping with an upgrade error at the very beggining of the extended ROM flashing no matter which ROM you were flashing to it! At the end they exchanged it for a new one, probably the ROM chip was faulty!"
if you're unlocky
Hi Rudegar,
first MANY MANY MANY THANKS for Your support.
I'm very unlucky.
I'm not able to upgrade my PPC.
The strange thing is that i can upgrade Radio Stack and even Extended Rom!
Only CE ROM wont' update.
Previous CE ROM installed was AKU 3.5 and Windows Mobile 5.0
Everythings worked fine.
Non other way?
I've seen that after launched del himaupgradeUt_noID the Activesync tray icon ho away.
My PPC sometimes ins't "seen" by my XP while other times it is "unknown device"
Why Can I only update RADIO and Extended Rom, while CE Rom not?
... P.S.
evey kind of button that I push the PPC is always in Bootloader Mode!
I'ev tryed: POWER + CAMERA + REC + STYLUS over the hole.
When I put the PPC to battery charger, red led is on until nothing is on the display, while when there is the written over the display, led is off.
No way to help me?
No news? I'm so sad
hello. i have the same problem but i have some suspections: i have 3 wersions of wm6 roms. one weight is 64 mb and others 32. and i tkink we are trying install rom from htc, dell or ipaq to our mda or other... so- **** this wrong rom and search for normal rom for himalaya ->
take this one :
"
mirror in china ,but very rapid downloading
http://exs.mail.qq.com/cgi-bin/downl...3f0dd183418032
enter the code e506cd02 then go
thx to c_shekhar
"
screenshots: wm6 pro. : http://www.engadget.com/photos/windows-mobile-6-professional/
cheers
First I was using WM5, then I decided to WM6 ROM update and tried "nhocbanme PDAVIET WM6 for HP iPAQ rw68xx ROM", everything was OK, it worked well, after, I have decided to change it with Garmin 03.02.2008 Kumara TOUCH WM6 Premium- (OS CE 5.2.2000 Build 20000.1.0.0) ROM, I put the files of Garmin's to the MiniSD card, then pressed the soft buttons to make my ppc bootloader mod. However, it resetted, the I pressed the soft keys again and it closed with white screen, I think I pressed another button while pressing soft keys, ı could not understant. It still turned OFF and I am not turnin it ON, I tried lots os button combination but it did not work My battery is full and I connected it to my laptop by USB cable, but it did not see my PPC coz it is closed could anyone help me about this case?
please help me what do you suggest me?
Try to disconnect cable USB, to pull out a battery (for some minutes) and to pull out a card miniSD. Try to come in bootload, learn all methods. If it will be possible, start on a laptop native insertion WM5, connect the device and burn it. Then stitch worker WM6 if is. If nothing will turn out that collect JTAG a cable, and reanimate.
sugermas said:
Try to disconnect cable USB, to pull out a battery (for some minutes) and to pull out a card miniSD. Try to come in boot the menu, learn all methods. If it will be possible, start on a laptop native insertion WM5, connect the device and burn it. Then stitch worker WM6 if is. If nothing will turn out that collect JTAG a cable, and reanimate.
Click to expand...
Click to collapse
Thank you very much for ur information bro,
sugermas said:
start on a laptop native insertion WM5,connect the device and burn it. Then stitch worker WM6 if is.
Click to expand...
Click to collapse
you said that, how can I do this? could you help me?
At me rover g5, clone Atom EXEC, on how many I know your device - close brother Atom EXEC.
You have native insertion WM5? If there is no that download it.
It is possible to come in bootloader? If that is possible come into it, start Device Software Update Utility.exe (or the similar program starting ROM UPDATE), connect the device to USB, and burn. I do not recommend to be stitched from card MiniSD.
sugermas said:
At me rover g5, clone Atom EXEC, on how many I know your device - close brother Atom EXEC.
You have native insertion WM5? If there is no that download it.
It is possible to come in bootloader? If that is possible come into it, start Device Software Update Utility.exe (or the similar program starting ROM UPDATE), connect the device to USB, and burn. I do not recommend to be stitched from card MiniSD.
Click to expand...
Click to collapse
I could not come in bootloader, this is my problem :S my PPC is not working.
kumaranın romu 6815 için değil yanlış yüklemişsin, bataryayı çıkart 5 dakka bekle resete basılı tutarak bataryayı tak
ama 68xx yazıyor ilgili ROM da. dediğin yöntemi de bir çok kez denedim ama olmadı :S yarın servise götürcem :S JTAG ı beceremem diye düşünüyorum :S
-------------------------------------------------------------
Is there anyone who could help me?
bootloader ini bozmadıysan jtag e gerek yok, kumaranın romunda bootloadere geçişi farklıydı galiba, ona bir bak.
bu arada kumaranın neresinde 68 diye yazyır ?
Englisch forum
This is an Englisch forum.
b3kturk said:
First I was using WM5, then I decided to WM6 ROM update and tried "nhocbanme PDAVIET WM6 for HP iPAQ rw68xx ROM", everything was OK, it worked well, after, I have decided to change it with Garmin 03.02.2008 Kumara TOUCH WM6 Premium- (OS CE 5.2.2000 Build 20000.1.0.0) ROM, I put the files of Garmin's to the MiniSD card, then pressed the soft buttons to make my ppc bootloader mod. However, it resetted, the I pressed the soft keys again and it closed with white screen, I think I pressed another button while pressing soft keys, ı could not understant. It still turned OFF and I am not turnin it ON, I tried lots os button combination but it did not work My battery is full and I connected it to my laptop by USB cable, but it did not see my PPC coz it is closed could anyone help me about this case?
Click to expand...
Click to collapse
It seems that you have not read the first post of the thread properly. nhocbanme PDAVIET WM6 is for your unit that is why it worked for your HP6815. As stated above, you have switch to garmin KUMARA TOUCH WM6 Premium which is for XDA ATOM(black) and ATOM PURE(white) only. If only you have read carefully and understand the thread before doing the update procedure you may still have a working device.
This may be a case of ANOTHER bricked device because of not READING properly. That is why it is stated in the first page of the thread for what device can the ROM be used. You may try to check the wiki if you can still revive your unit. Although the JTAG of the HP units are different from the ATOM. Good luck mate
hprw6815 keep self reset BL FF.FF.FF
have earlier update with Ver2.02.01b_byNHOCBANME i was very happy with it but bt handsfree didnt worked so i tried 6828-WM61-20080920-b165.tarminisd then i couldnt update back i changed bl to HP BL1.0.1 with out success i think my devise is ****ed up... i appreciate if some one can help me