Plz guide me how to hardreset in himalaya 2005?
in the bootloader you format chipOnDisk and it's hardreset
why don't you ask it in WM2005 forum.
Press Note and Camera buttons the hit the softrest.
Related
MY Hermes was dead after upgrad to WM6 PRO 3.54c ROM
--------------------------------------------------------------------------------
Please help!
i upgraded my hermes to WM6 PRO 3.54c ROM. the phone operated well in the begining. however, when i was access the Today Music Plug-in, the phone was reboot by itself then could not entry wm 6 again (can not pass the wm6 green page and reboot and reboot again)
please help me
Hi,
The same thing happened to me with 3.43c. The only way I got passed the WM screen was to hard reset it. Give that a go and see if it helps.
Cheers
Subzuk
subzuk,
could you please tell me in detail how to fix this problem
because i have tried to hard reset my Hermes but in vain
(hold the OK, Power On and reset)
thx
siulung
siulung said:
subzuk,
could you please tell me in detail how to fix this problem
because i have tried to hard reset my Hermes but in vain
(hold the OK, Power On and reset)
thx
siulung
Click to expand...
Click to collapse
Why not try to reflash the OS again?
read the WIKI:
http://wiki.xda-developers.com/index.php?pagename=Hermes_For_Beginners#hardreset
Hi siulung,
I believe that you do this by pressing both of the soft keys to the left and right of under the screen and press reset.
Cheers
Subzuk
Siulung,
I would not do any more until you have done a serious amount of reading. The wiki link in the previous post is a good start.
Good luck.
WB
hi,
i solve my Hermes problem by hard reset it again
thank you for your help
siulung
I have flashed my SDA Music to WM6, but i will now again WM2003 SE with German Language..... i need help, i found no ROM...
Greez Richy
I don't know if it is old news, but reverting to 2003se is possible and very simple.
You just have to get into bootloader mode (tricolor screen, whatever it's called) format filesystem with mtty (format BINFS), reboot, get in bootloader mode again, and apply T-Mobile upgrade.
does any1 has Orange Spv C550 ROM.. i need to downgrade from WM6 but dont hav da C550 ROM & can't find it online as yet can any1 help plzzz.....
..i tried to install new windows..but ..later it just end up leaving in bootloader mode ...i tried hard spl...hard reset...tried unplug usb and battery too ..but neither work....can anyone help me to retain my jamin...help please
can you please post ipl spl and rom which you are trying to flash?
The answer
Hy i had the same problem before and this will be the steps u should do.
1- try to install one of the avilable base Roms of pdaviet or i-mate base rom which use the old upgrade with the c-sharp screen (i hope u cud understand me) like we were doing before hardspl wasnot come yet . from herehttp://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e
and about how cud u install this base rom see this topic for dioxda2 see the #5 directly
http://forum.xda-developers.com/showthread.php?t=439440
2-or you can use any of dioxda2 roms as all of them are with upgrade mode not depending on hardspl
3 then u should make hardspl using upgrade mode also not by choosing g4 or g3 (and if u donot have that files tell me and i will upload them to u) then u will see if u want to make hardspl for g3 or g4 and then u can select
it's hardspl for G4 http://download163.mediafire.com/5nzwwddmm5jg/nvztmymcnmu/HardSPL+G4.rar be carefull it's G4 so if ur phone is g4 u can use it and if not i will try to find hardspl for g3
4- then after u make hardspl u can install any rom using g4 or g3 directly not upgrade mode
after u finish tell me if it's ok or not
the simple way to upgrade windows mobile 6.1
u can use lazytool. But u must know your device which one G3 or G4?
if IPL/SPL:
ending .000 G3
ending .0000 G3
ending .0001 G4
U can switch the spl to 2.G3.4PDA or 2.G4.4PDA with lazytool and u can upgrade any rom which you want.
link is here
my ipl
IPL 1013.0001
SPL 2.20.0001
and when i do hard spl it shows
IPL 1013.0001
SPL 2.20.0001
GSM 02.47.21..with imate background ..and dont go further..
help please
Guide to use Lazytool
Your device is G4. I teach you solving your upgrading problem. It is a guide for using Prophet LazyTool. Your device must be synchronised your pc. Device must not in bootloader. You can 2 different way to upgrade.
DOWNLOAD this file and extract it.
Method 1
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
In this folder firstly copy a nk.nbf file (Any WM6.1) to Lib folder. Then run UPGRADE.bat and press key 2.
Doing this changing your device spl 2.G4.4PDA and upgrading your rom.
Follow the instruction and be sure your battery greater then 50%.
After the installation do a hard reset with cam button + comm button + Soft reset.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Method 2
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
In this folder run UPGRADE.bat and press key 2.
Doing this changing your device spl 2.G4.4PDA and do a soft reset.
Now you can upgrade any wm6.1 rom on your device. You take your device to Bootloader with comm button + Soft reset.
Just copy a nk.nbf file (Any WM6.1) to Lib folder and run ROMUpdateUtility_NV_G4.
Follow the instruction and be sure your battery greater then 50%.
After the installation do a hard reset with cam button + comm button + Soft reset.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
i wonder can you upgrade your device?
I have a problem when Upgrade WM 5 to WM 6.1
when i upgrade my atom pure from WM 5 to WM 6.1 is success, and than i downgrade from WM 6.1 to WM 6.0. after flashing the device reboot and than the atom only vibrate and blank on the screen.
I try to hard reset it's still vibrate only and cannot load bootloader screen...
so somebody please help me....
ps : sorry my english it's not good, i hope all of you understand what i mind...
thanks
If you still haven't solved you problem:
you can simply pull out the battery while pressing and holding down the camera button AND reinserting it while still holding the camera button down.
then once you release the camera button.
it should boot
This worked for me and my atom loaded to the bootloader and i was able to successfully flash it
Hello,
i need to hard reset to update my ipaq 6815 to windows mobile 6.5 but my keys are not working anymore, they're disconnected inside the smartphone.. is there any other way to hard reset ?
by computer ?
any suggestions?
thanks in advance
bye