I have flashed my SDA Music to WM6, but i will now again WM2003 SE with German Language..... i need help, i found no ROM...
Greez Richy
I don't know if it is old news, but reverting to 2003se is possible and very simple.
You just have to get into bootloader mode (tricolor screen, whatever it's called) format filesystem with mtty (format BINFS), reboot, get in bootloader mode again, and apply T-Mobile upgrade.
does any1 has Orange Spv C550 ROM.. i need to downgrade from WM6 but dont hav da C550 ROM & can't find it online as yet can any1 help plzzz.....
Related
Hi @ll,
problem is i´ve to get an 1.60UK Rom to my MDAII with 1.72GER Rom. But that stupid Flash Tool from T-Mobile GER fails everytime. When i set my MDA to upgrade settings (Power-on + Reset + 4-way-Button) i get a screen saying "serial v1.06". Is that the Version of my bootloader ? Cause i found a thread that said "Downgrade with 1.06 isnt possible". Is that still so ?
Are there any ways to get my MDAII to Rom 1.60UK if i already have an 1.72 GER installed ?
Thx for help
Dr.Zorck
I tried to upgrade my imate jamin s200 to smart1_wm6_pp8mb. since the operation did not finished I unplugged the usb cable, therefore the machine didn't work and opening now. now some messages are appearing on the screen (IPL:2.15.0001; SPL 2.15.0001; GSM 02.19.21; OS:10.1.0.811)
i need your urgently help... How can i fix it this problem and upgrade my rom again?
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Thank you very much, could you plase upload here i cant find the last update ,
i''m waiting you..
i dont know what is my qtek last update How can i learn it?
When you want to know what ROM you have flashed to your device, go to Start -> Settings -> System -> Device Information! Here you can find all information you need!
By the way: the latest Qtek update for the S200 is 2.20! You can find it trough Gooogle or the board search! Good luck!
animelover said:
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Click to expand...
Click to collapse
Hi animelover,
Just a question...Do you use the OS extract tool to flash only the os without changing the IPL/SPL, or the roms that you wrote about have no IPL/SPL upgrade? I mean did you fash directly or you flashed only the extracted OS?
Thanks!
I tried to upgrade my athena (french rom) with wm6 english version, and it was the crash
the original rom is dammaged and athena w'ont start enven with hard rest ???
(I did unlock it, it was bought in belgium and its was sim-unlocked).
Any help please to re-install original french rom or any thing else ???
Enter Bootloader mode and check if it says SPL: Olipro
If yes, that you should be able to flash a ROM (the one for your device)
even without ActiveSync Connection
If not, you haven't unlocked correctly.
Don't know what you can do then -_-
hi there, i have received a tytn from germany, it had wm5 in germany,i did sim and cid unlocker and flashed it with hardspl7 to put shaps portuguese rom.
the thing is, every time i put a wm6 rom the tytn freezes at htc splash screen.
to unbrick it, i have to put an wm5 rom with 1.04 spl and it freezes again at splash screen, this time saying "No GSM", have to flash a radio rom and it backs to normal.
i dont know what i can do to tytn loads a wm6 rom...
It is impossible to flash wm6 in this tytn??
thank you all
i'd say... it's definately wrecked... i got a german-tytn myself and it's working fine under wm6
sure u're not using a pre-branded device?
no, its a htc tytn - hermes 200... its working 100% with wm5.
but with wm6 it doesnt pass the splash screen...
its not the first time i upgrade a tytn, but this is happening for the first time, its really strange.... i dont what i can do more..... any help?
thank you
Any help please??
Thanks
Hello, this is my first post.
I have bought an SPV M3100 (HTC Tytn). It is my second WinMo phone with touchscreen (first was Eten x500). I've unlocked it (SIM and SuperCID). I've seen here some WM6.5 roms, but they ware moded. I want a CLEAN (original) version of WinMo 6.5 (to customize it myself how i like). I want the WWE version (Romania).
Also, I want to know if WinMo 6.5 have Mass Storage option for card, or i will need a 3rd party program (becouse i don't like ActiveSync) ?
...
Great comunity here
georgik ce faci tata...nu-ti raspunde lumea?
w3b3r said:
georgik ce faci tata...nu-ti raspunde lumea?
Click to expand...
Click to collapse
NU
ooo fratsilor!!!! romania? moldova?
help please
Hi all of you!
I have a Hermes (HTC Tytn/ Orange SPV M3100) and i succesfully tried a lot of ROM’s until these days..
But, this happened:
During upgrade of a ROM, i made the mistake to disconect the device from the PC..
And, now the problem is that i can’t boot ANY OTHER ROM!
I can enter to BootLoader , where i see
HERM100
I PL – 1.04
HERM100
SPL – 2.03
ALSO, i CAN connect to PC (it displays „usb” & i see it on Device manager)
(PC run Vista Ultimate 64 bit).
But, when i try to upgrade ANY ROM , the process starts, BUT STOPS at 0% ? .
I searched & read 4 days for a SOLUTION to make my phone alive again..
Can anyone tell me what to do?
Is a REAL solution for this issue?
Please reply.
Thanks!