HP rw6815 does not working after ROM update. - iPAQ rw6828, XDA Atom ROM Development

First I was using WM5, then I decided to WM6 ROM update and tried "nhocbanme PDAVIET WM6 for HP iPAQ rw68xx ROM", everything was OK, it worked well, after, I have decided to change it with Garmin 03.02.2008 Kumara TOUCH WM6 Premium- (OS CE 5.2.2000 Build 20000.1.0.0) ROM, I put the files of Garmin's to the MiniSD card, then pressed the soft buttons to make my ppc bootloader mod. However, it resetted, the I pressed the soft keys again and it closed with white screen, I think I pressed another button while pressing soft keys, ı could not understant. It still turned OFF and I am not turnin it ON, I tried lots os button combination but it did not work My battery is full and I connected it to my laptop by USB cable, but it did not see my PPC coz it is closed could anyone help me about this case?

please help me what do you suggest me?

Try to disconnect cable USB, to pull out a battery (for some minutes) and to pull out a card miniSD. Try to come in bootload, learn all methods. If it will be possible, start on a laptop native insertion WM5, connect the device and burn it. Then stitch worker WM6 if is. If nothing will turn out that collect JTAG a cable, and reanimate.

sugermas said:
Try to disconnect cable USB, to pull out a battery (for some minutes) and to pull out a card miniSD. Try to come in boot the menu, learn all methods. If it will be possible, start on a laptop native insertion WM5, connect the device and burn it. Then stitch worker WM6 if is. If nothing will turn out that collect JTAG a cable, and reanimate.
Click to expand...
Click to collapse
Thank you very much for ur information bro,
sugermas said:
start on a laptop native insertion WM5,connect the device and burn it. Then stitch worker WM6 if is.
Click to expand...
Click to collapse
you said that, how can I do this? could you help me?

At me rover g5, clone Atom EXEC, on how many I know your device - close brother Atom EXEC.
You have native insertion WM5? If there is no that download it.
It is possible to come in bootloader? If that is possible come into it, start Device Software Update Utility.exe (or the similar program starting ROM UPDATE), connect the device to USB, and burn. I do not recommend to be stitched from card MiniSD.

sugermas said:
At me rover g5, clone Atom EXEC, on how many I know your device - close brother Atom EXEC.
You have native insertion WM5? If there is no that download it.
It is possible to come in bootloader? If that is possible come into it, start Device Software Update Utility.exe (or the similar program starting ROM UPDATE), connect the device to USB, and burn. I do not recommend to be stitched from card MiniSD.
Click to expand...
Click to collapse
I could not come in bootloader, this is my problem :S my PPC is not working.

kumaranın romu 6815 için değil yanlış yüklemişsin, bataryayı çıkart 5 dakka bekle resete basılı tutarak bataryayı tak

ama 68xx yazıyor ilgili ROM da. dediğin yöntemi de bir çok kez denedim ama olmadı :S yarın servise götürcem :S JTAG ı beceremem diye düşünüyorum :S
-------------------------------------------------------------
Is there anyone who could help me?

bootloader ini bozmadıysan jtag e gerek yok, kumaranın romunda bootloadere geçişi farklıydı galiba, ona bir bak.
bu arada kumaranın neresinde 68 diye yazyır ?

Englisch forum
This is an Englisch forum.

b3kturk said:
First I was using WM5, then I decided to WM6 ROM update and tried "nhocbanme PDAVIET WM6 for HP iPAQ rw68xx ROM", everything was OK, it worked well, after, I have decided to change it with Garmin 03.02.2008 Kumara TOUCH WM6 Premium- (OS CE 5.2.2000 Build 20000.1.0.0) ROM, I put the files of Garmin's to the MiniSD card, then pressed the soft buttons to make my ppc bootloader mod. However, it resetted, the I pressed the soft keys again and it closed with white screen, I think I pressed another button while pressing soft keys, ı could not understant. It still turned OFF and I am not turnin it ON, I tried lots os button combination but it did not work My battery is full and I connected it to my laptop by USB cable, but it did not see my PPC coz it is closed could anyone help me about this case?
Click to expand...
Click to collapse
It seems that you have not read the first post of the thread properly. nhocbanme PDAVIET WM6 is for your unit that is why it worked for your HP6815. As stated above, you have switch to garmin KUMARA TOUCH WM6 Premium which is for XDA ATOM(black) and ATOM PURE(white) only. If only you have read carefully and understand the thread before doing the update procedure you may still have a working device.
This may be a case of ANOTHER bricked device because of not READING properly. That is why it is stated in the first page of the thread for what device can the ROM be used. You may try to check the wiki if you can still revive your unit. Although the JTAG of the HP units are different from the ATOM. Good luck mate

hprw6815 keep self reset BL FF.FF.FF
have earlier update with Ver2.02.01b_byNHOCBANME i was very happy with it but bt handsfree didnt worked so i tried 6828-WM61-20080920-b165.tarminisd then i couldnt update back i changed bl to HP BL1.0.1 with out success i think my devise is ****ed up... i appreciate if some one can help me

Related

HELP my MDAII is dead after downgrading!!!

Hya
I tried to downgrade my MDAII from the ROM 1.72 to ROM 1.66.
But after downgrading it, it looks like my MDA II is dead now...
It doesnt do anything anymore
Now I got a white screen with upper writing "SERIAL"
and down "V1.03" and no backlight at all...
Can somebody help/guide me how to fix my device?
I'm a newbee and need yoru help
Many thanks.
'Serial' just means that its trying to communicate in Serial mode, if you drop it onto the dock/charger (assuming that is connected to your PC) the word 'Serial' should change to 'USB'. If it does then try the downgrade again.
VW_ELM said:
I tried to downgrade my MDAII from the ROM 1.72 to ROM 1.66.
But after downgrading it, it looks like my MDA II is dead now...
Click to expand...
Click to collapse
Don't worry, it's not dead. If the downgrade process completed normally, you just need to do a hard reset (press power button while holding stylus in reset hole). If this doesn't help, the downgrade failed.
The most likely reason is that you connected the cradle to a USB hub. Try connecting it directly to your PC, then perform the flash procedure again.
Another possibility is that you used Windows 95/98/ME. Some users have reported problems. Try the flash procedure from a Windows 2000/XP system again.
Hope this helps!
Daniel
nope it doesn't work, i've got the same problem!
Don't know what to do...
Thanks tadzio: B4 l have same problem Rom failure , and l try to reinstall
again, flash Rom now :lol:
I post a original latest belgian rom on this forum (rom from dangard), try to install this version.
http://forum.xda-developers.com/viewtopic.php?t=8403&postdays=0&postorder=asc&start=75
you need to dowload this file (a shortcut) on your pc, then execute it following the procedure.
Bye
I solved the problem for me:
With HimaUpgradeUt.exe there was no connection. It was a too old version (0.5.0.0).
So I replaced it with Version 0.6.0.0 and it runs !!!

Jamin rom downfall

I tried to upgrade my imate jamin s200 to smart1_wm6_pp8mb. since the operation did not finished I unplugged the usb cable, therefore the machine didn't work and opening now. now some messages are appearing on the screen (IPL:2.15.0001; SPL 2.15.0001; GSM 02.19.21; OS:10.1.0.811)
i need your urgently help... How can i fix it this problem and upgrade my rom again?
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Thank you very much, could you plase upload here i cant find the last update ,
i''m waiting you..
i dont know what is my qtek last update How can i learn it?
When you want to know what ROM you have flashed to your device, go to Start -> Settings -> System -> Device Information! Here you can find all information you need!
By the way: the latest Qtek update for the S200 is 2.20! You can find it trough Gooogle or the board search! Good luck!
animelover said:
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Click to expand...
Click to collapse
Hi animelover,
Just a question...Do you use the OS extract tool to flash only the os without changing the IPL/SPL, or the roms that you wrote about have no IPL/SPL upgrade? I mean did you fash directly or you flashed only the extracted OS?
Thanks!

[Qtek2020]: Error 112: CE Rom Update Error. PLEASE HELP ME!

Hi people,
I'm Luca from Italy, and I'm writing here hoping that You can help me to recover my dead PPC.
My PPC, when living, had Windows Mobile 5 like O.S.
So, As i've some problems with the phone I've decided to downgrade the radio version from 1.17 (people say that it is buggy) to 1.08.
So i run the HimaUpgradeUt_noID (I've also HimaUpgradeUt), but i've forgotten to delete the NK.nbf file from the directory.
I put the PPC in bootloader mode (SERIAL on top and ver. 1.06 on bottom) and then to the cradle directly to the motherboard USB connector
The sofware begin to update upgrading even ROM CE file, but when it arrived at 31% himaUpgrade stopped its work, showing that I need to reset (only normal reset and not soft reset) the PPC From this time until now my PPC show always and only the bootloader view.
When I try to upgrade again, the himalaya soft don't show what my PPC has like rom or radio version. It shows only the Ce rom and Radio that I'm going to ugrade.
It seems that software isn't able to erase ROM IMAGE
Active sync can't identify the device (some time it is indentified as unknown device).
When i start the software for ugrade the Active sync tray icon disappear.
I'm only able to ugrade radio stack or ExtRom.
PLEASE PLEASE PLEASE, HELP ME.
P.S. The device is unlocked
2 hits
http://www.expansys-kr.com/ft.aspx?k=21161
"Edited:- Problem solved, I loaded the upgrade from a different PC. I don't know why my main PC would not work as that is the one I regularly sinc the pocket PC to, but it just kept aborting the upgrade. Anyone else having this problem, try another PC."
if you're lucky
http://forum.xda-developers.com/sho...t=Failing+ROM+Update+Jam.+Error+112+CE+Failed
"it was stoping with an upgrade error at the very beggining of the extended ROM flashing no matter which ROM you were flashing to it! At the end they exchanged it for a new one, probably the ROM chip was faulty!"
if you're unlocky
Hi Rudegar,
first MANY MANY MANY THANKS for Your support.
I'm very unlucky.
I'm not able to upgrade my PPC.
The strange thing is that i can upgrade Radio Stack and even Extended Rom!
Only CE ROM wont' update.
Previous CE ROM installed was AKU 3.5 and Windows Mobile 5.0
Everythings worked fine.
Non other way?
I've seen that after launched del himaupgradeUt_noID the Activesync tray icon ho away.
My PPC sometimes ins't "seen" by my XP while other times it is "unknown device"
Why Can I only update RADIO and Extended Rom, while CE Rom not?
... P.S.
evey kind of button that I push the PPC is always in Bootloader Mode!
I'ev tryed: POWER + CAMERA + REC + STYLUS over the hole.
When I put the PPC to battery charger, red led is on until nothing is on the display, while when there is the written over the display, led is off.
No way to help me?
No news? I'm so sad
hello. i have the same problem but i have some suspections: i have 3 wersions of wm6 roms. one weight is 64 mb and others 32. and i tkink we are trying install rom from htc, dell or ipaq to our mda or other... so- **** this wrong rom and search for normal rom for himalaya ->
take this one :
"
mirror in china ,but very rapid downloading
http://exs.mail.qq.com/cgi-bin/downl...3f0dd183418032
enter the code e506cd02 then go
thx to c_shekhar
"
screenshots: wm6 pro. : http://www.engadget.com/photos/windows-mobile-6-professional/
cheers

Xda atom pure dead after upgrade wm 6.5

Dear All, Please help me how to repair my ATOM.
My ATOM PURE was dead after upgrade from wm 6.1 to wm 6.5.
LCD blank all button doesn't work.
which ROM did you download ?
what was the Setup you used for Flashing - OS Only, OS+Ext ROM, etc...
Did you notice any error while flashing?
After you try to start the PDA now, do you get any LED / LIGHT or ray of light on LCD.
Did you try starting with another battery...
Sorry, but will ask more questions sooon. Actually trying to troubleshoot the issue.
hehehehe, bad news..
hehehehe
suga_ngr said:
Dear All, Please help me how to repair my ATOM.
My ATOM PURE was dead after upgrade from wm 6.1 to wm 6.5.
LCD blank all button doesn't work.
Click to expand...
Click to collapse
i also have the same expirience with you, my phone totally like dead, no respone at all!!! even switch on or press any buton. any body can help?
We need to know which ROM you downloaded to upgrade your Device with... if you don't tell us, then all we can do is sit around making wild guesses without getting anywhere...
Dude, chill, for all you know its a bot your talking to
i have your answer
steven3889 said:
i also have the same expirience with you, my phone totally like dead, no respone at all!!! even switch on or press any buton. any body can help?
Click to expand...
Click to collapse
Just pull out the battery for a while. Next, hold down the on button and the camera button at the same time, and then put the battery back in. this takes some practice to get it right. After it will boot up to MN1 bootloader.
Cheers
Dead ATOM Pure
jadephyre said:
which ROM did you download ?
Click to expand...
Click to collapse
My friend
i was try to upgrade from wm 6.1 to 6.5 from arunk2 link, it's ROM CE OS 5.2.210501.
thanks very much for your cooperation and i hope my atom can be life again
jadephyre said:
We need to know which ROM you downloaded to upgrade your Device with... if you don't tell us, then all we can do is sit around making wild guesses without getting anywhere...
Click to expand...
Click to collapse
that ROM come from ARUNK2 link.
How to recover dead atom pure after failed wm 6.5 upgrade
suga_ngr said:
that ROM come from ARUNK2 link.
Click to expand...
Click to collapse
HOW TO RECOVER DEAD ATOM PURE AFTER FAILED WM 6.5 UPGRADE
Step 1. Pull out the battery
Step 2. Do the following 2 things simultaneously:
1) Press down the Camera Button (right side of your Atom)
2) While holding Camera Button down, put the battery back inside.
Step 3 Wait for 2 seconds. Now your Atom will automatically re-boot to MN1 Bootloader.
Once you are in MN1 Bootloader, connect to your PC by USB link, and upgrade with any WM 6.1 ROM.
Good luck
Christian
GOOD NEWS
Dear KLAPEREK
I have been do all your command and now my atom is runing well, so thank you very much for your help.
by the way iam come from Indonesia, i would ask regarding wm 6.1.
1. now iam using wm 61 ce os 213 pdavie all device are runnig well ( a2dp bluetooth, wifi, gprs,infra red ).
2. do you know how to fix stk software ? everytime when i try to use stk on the password box always popup please inset something after iam fill that box with passwort string.
3. what your suggestion for the best wm for atom pure ?
4. iam realy appreciate with your help regarding my atom problem
5. do you have some blog or email
6. this my e-mail : [email protected]
klaperek said:
HOW TO RECOVER DEAD ATOM PURE AFTER FAILED WM 6.5 UPGRADE
Step 1. Pull out the battery
Step 2. Do the following 2 things simultaneously:
1) Press down the Camera Button (right side of your Atom)
2) While holding Camera Button down, put the battery back inside.
Step 3 Wait for 2 seconds. Now your Atom will automatically re-boot to MN1 Bootloader.
Once you are in MN1 Bootloader, connect to your PC by USB link, and upgrade with any WM 6.1 ROM.
Good luck
Christian
Click to expand...
Click to collapse
hi,
i was follow your step, but still failed to boot on my o2 atom pure,
take out baterry > hold camera button and put back battery at the same time. any other solution?
Dear
First you try to go in boot loader mode and then you try try upgrade rom, if your atom did not power on then you lost his boot loader.
don't worry we have the solution to repair the boot loader, first of all you try to power it on in bl mode if not then mail me at "[email protected]" i will tell you the complete procedure for repair the atom with help of jtag.

Is my Jamin dead? Help pleeeeease!

Hi everyone.
I tried to upgrade my i-mate Jamin to WM 6.5 using this file.
I think I did everything right (I checked the G4 and HardSPL in the beginning of installation and I'm sure my MB is G4).
Everything was going perfect and the installation advanced without any problems, but at the end my Jamin was stuck in the three color screen, showing only the following words:
IPL: 2.13.001
SPL: 2.13.001
I tried to hold the Comm Manager and Soft Reset buttons as this topic recommends, but the phone gets back to the 3 color screen again, and no success...
I tried to pull out and reinsert the battery, also no success...
Please help me, this is my friend's phone! I AM SO NERVOUS and I may kill somebody!
Is there anything I can do to get rid of the 3 color screen?
mahi58 said:
Hi everyone.
I tried to upgrade my i-mate Jamin to WM 6.5 using this file.
I think I did everything right (I checked the G4 and HardSPL in the beginning of installation and I'm sure my MB is G4).
Everything was going perfect and the installation advanced without any problems, but at the end my Jamin was stuck in the three color screen, showing only the following words:
IPL: 2.13.001
SPL: 2.13.001
I tried to hold the Comm Manager and Soft Reset buttons as this topic recommends, but the phone gets back to the 3 color screen again, and no success...
I tried to pull out and reinsert the battery, also no success...
Please help me, this is my friend's phone! I AM SO NERVOUS and I may kill somebody!
Is there anything I can do to get rid of the 3 color screen?
Click to expand...
Click to collapse
Please don't panic! If you see when connect the phone to the computer and USB message on the bottom of prophet screen update is posible. So try to put original WM5 on the phone. Read dioxda2 post for more. For sure you don't hardspl your phone before flashing....
Thanks
bikertibi said:
Please don't panic! If you see when connect the phone to the computer and USB message on the bottom of prophet screen update is posible. So try to put original WM5 on the phone. Read dioxda2 post for more. For sure you don't hardspl your phone before flashing....
Click to expand...
Click to collapse
Thank you very much, my problem solved using the WM5 flashing process.
I thought it's impossible to get the phone connected to PC because activesync wasn't establishing a connection to the phone, but obviously I was wrong.
After flashing WM5, I performed a HSPL on the phone, and then used the file again, and the phone was upgraded to WM 6.5 with no problem.
I previously had downloaded your 6.5 ROM from a crappy forum, which was only including a download link and some useless info, and since I was a newbie myself D), I didn't even know that I should have performed a HSPL before upgrading the OS.

Categories

Resources