Dear All, Please help me how to repair my ATOM.
My ATOM PURE was dead after upgrade from wm 6.1 to wm 6.5.
LCD blank all button doesn't work.
which ROM did you download ?
what was the Setup you used for Flashing - OS Only, OS+Ext ROM, etc...
Did you notice any error while flashing?
After you try to start the PDA now, do you get any LED / LIGHT or ray of light on LCD.
Did you try starting with another battery...
Sorry, but will ask more questions sooon. Actually trying to troubleshoot the issue.
hehehehe, bad news..
hehehehe
suga_ngr said:
Dear All, Please help me how to repair my ATOM.
My ATOM PURE was dead after upgrade from wm 6.1 to wm 6.5.
LCD blank all button doesn't work.
Click to expand...
Click to collapse
i also have the same expirience with you, my phone totally like dead, no respone at all!!! even switch on or press any buton. any body can help?
We need to know which ROM you downloaded to upgrade your Device with... if you don't tell us, then all we can do is sit around making wild guesses without getting anywhere...
Dude, chill, for all you know its a bot your talking to
i have your answer
steven3889 said:
i also have the same expirience with you, my phone totally like dead, no respone at all!!! even switch on or press any buton. any body can help?
Click to expand...
Click to collapse
Just pull out the battery for a while. Next, hold down the on button and the camera button at the same time, and then put the battery back in. this takes some practice to get it right. After it will boot up to MN1 bootloader.
Cheers
Dead ATOM Pure
jadephyre said:
which ROM did you download ?
Click to expand...
Click to collapse
My friend
i was try to upgrade from wm 6.1 to 6.5 from arunk2 link, it's ROM CE OS 5.2.210501.
thanks very much for your cooperation and i hope my atom can be life again
jadephyre said:
We need to know which ROM you downloaded to upgrade your Device with... if you don't tell us, then all we can do is sit around making wild guesses without getting anywhere...
Click to expand...
Click to collapse
that ROM come from ARUNK2 link.
How to recover dead atom pure after failed wm 6.5 upgrade
suga_ngr said:
that ROM come from ARUNK2 link.
Click to expand...
Click to collapse
HOW TO RECOVER DEAD ATOM PURE AFTER FAILED WM 6.5 UPGRADE
Step 1. Pull out the battery
Step 2. Do the following 2 things simultaneously:
1) Press down the Camera Button (right side of your Atom)
2) While holding Camera Button down, put the battery back inside.
Step 3 Wait for 2 seconds. Now your Atom will automatically re-boot to MN1 Bootloader.
Once you are in MN1 Bootloader, connect to your PC by USB link, and upgrade with any WM 6.1 ROM.
Good luck
Christian
GOOD NEWS
Dear KLAPEREK
I have been do all your command and now my atom is runing well, so thank you very much for your help.
by the way iam come from Indonesia, i would ask regarding wm 6.1.
1. now iam using wm 61 ce os 213 pdavie all device are runnig well ( a2dp bluetooth, wifi, gprs,infra red ).
2. do you know how to fix stk software ? everytime when i try to use stk on the password box always popup please inset something after iam fill that box with passwort string.
3. what your suggestion for the best wm for atom pure ?
4. iam realy appreciate with your help regarding my atom problem
5. do you have some blog or email
6. this my e-mail : [email protected]
klaperek said:
HOW TO RECOVER DEAD ATOM PURE AFTER FAILED WM 6.5 UPGRADE
Step 1. Pull out the battery
Step 2. Do the following 2 things simultaneously:
1) Press down the Camera Button (right side of your Atom)
2) While holding Camera Button down, put the battery back inside.
Step 3 Wait for 2 seconds. Now your Atom will automatically re-boot to MN1 Bootloader.
Once you are in MN1 Bootloader, connect to your PC by USB link, and upgrade with any WM 6.1 ROM.
Good luck
Christian
Click to expand...
Click to collapse
hi,
i was follow your step, but still failed to boot on my o2 atom pure,
take out baterry > hold camera button and put back battery at the same time. any other solution?
Dear
First you try to go in boot loader mode and then you try try upgrade rom, if your atom did not power on then you lost his boot loader.
don't worry we have the solution to repair the boot loader, first of all you try to power it on in bl mode if not then mail me at "[email protected]" i will tell you the complete procedure for repair the atom with help of jtag.
Related
@all
anyone have a solution on how to downgrade rom..
i have a ATOM and upgraded to ATOM EXEC rom..
theres some guide in here but its inside of other thread and its not working..
please help us..i know im not the only one have a problem like this..
thanks in advance..
-=[serialzs]=-
If you have Atom Exec ROM, then the bootloader keys are Camera+Reset. If you can enter bootloader, you can now upgrade to the usual XDA Atom ROM.
Cheers,
Jiggs
jiggs said:
If you have Atom Exec ROM, then the bootloader keys are Camera+Reset. If you can enter bootloader, you can now upgrade to the usual XDA Atom ROM.
Cheers,
Jiggs
Click to expand...
Click to collapse
where i can put the bootloader? can you help me? please..
-=[serialzs]=-
serialzs said:
where i can put the bootloader? can you help me? please..
-=[serialzs]=-
Click to expand...
Click to collapse
press camera+reset button. you should see bootloader screen. From here, upgrade using the procedure I discussed in the aku3.3 thread.
cheers,
Jiggs
thanks for the help but i figure it out on my own now..i done it with something i dont think earlier because im too excited..hehe..
now i have a atom rom back again..
i will guide people have same problem..hope i can help..
-=[serialzs]=-
o2 atom upgrade problem
hi
i need ur help
i have o2 atom i upgrade to exec now i can not go back
it give me error in connection
please help
all_brother2002 said:
hi
i need ur help
i have o2 atom i upgrade to exec now i can not go back
it give me error in connection
please help
Click to expand...
Click to collapse
what version of atom exec you use?
-=[serialzs]=-
Well, I managed to downgrade my ROM back to the original Atom (my sig isn't updated - had problems with the extROM wiping itself) - but I was kinda lucky.
Y'see, the AE hack rom I use has an updated bootloader that won't let you do a USB firmware update unless you're activesync'd.
The only way to solve an ExtROM wipe was to reflash the device, so I did. Using the hack ROM DSUU - at this point, the original ROM won't recognize the device - I found that it usually takes a few tries for the extROM update to go through (extROM format fail) - when it fails, your phone will be stuck in bootloader (Connect a USB cable). Repeated attempts to flash the phone solves the problem.
So when my extROM inevitably disappeared again, and I hit the extROM format fail again, I decided I had enough and tried using the original Atom0426-0822 ROM.
It went through this time.
Seems that the only way to bypass the bootloader lock is to semi-brick your device. >_>
Just a question to all of you who are more experienced than me
I want to change my atom exec wwe to cht, can anyone tell me how to bypass the device country id error. do i use an spl? and are these spl programs device specific? or do i use the bootloader mode? Can someone explain that to me?
Thanks all in advance.
Bootloader mode works as long as you aren't using the Atom Exec hacked ROM (bootloader will tell you to use Async if you try). To upgrade, go into the bootloader, connect via USB, and run the DSUU from the computer.
You know you did it correctly when your unit's current firmware information is read as "0" by the DSUU/
Ultimate Chicken said:
Bootloader mode works as long as you aren't using the Atom Exec hacked ROM (bootloader will tell you to use Async if you try). To upgrade, go into the bootloader, connect via USB, and run the DSUU from the computer.
You know you did it correctly when your unit's current firmware information is read as "0" by the DSUU/
Click to expand...
Click to collapse
Strange, i already did that, and got the "0" from DSUU, but when i start upgrading, the bootloader spits out a message saying that i should connect with OS mode.
Anyway, I've edited the diskimage_Ver.nb0 file to do it.
Hi,
I have the same problem :
- bootloader : ok
- firmware 0 : ok
but connection error !
Do you have an idea ?
Thanks a lot.
bedav said:
Hi,
I have the same problem :
- bootloader : ok
- firmware 0 : ok
but connection error !
Do you have an idea ?
Thanks a lot.
Click to expand...
Click to collapse
Hi guy the main key on the file call EBOOT everytime when you want dowgrade your OS to normal ATOM just put this file to you SD card then use the bootloader mode you can see "imge downloading" just wait for a second it will reboot again . then you can use the DSU mode to flash your device
thats work !
Thank you very much !
HELP on my atom exec
w/o reading, i downgraded my atom exec to atom...
hw can i bring back my atom exec default WM5 ROM?...
am planning to upgrde to WM6 aftr...
hi
i updated my atom rom version to 3.3.3 three days ago.It installed completed i used this rom 3-4 hours then i was freeze and i try to reset it. it didnt respond so i decided to hard reset to my atom.I tried to hard reset now it says "device clean boot....." it stuck this screen then i try to reset the device then it stuck o2 screen it didnt pass to align screen. i cant use my atom for three days
Please help me......
remove the battery for a while.. then try hard reset / reflash
i try this method but it is same it doesnt work
did u try the instructions posted in aku 3.3.3.??..
"
For those of you who have downloaded and flashed using SD Card method who ended up in a brick! ITEX recovers his Atom by following procedure:
1. remove SD Card
2. remove battery
3. hold camera button and reset (stylus) button
4. replace battery while still holding the buttons
This will bring you back to bootloader mode. Just flash the above DSUU.
"
Does it have a chance to use wm6?
joolawan said:
Does it have a chance to use wm6?
Click to expand...
Click to collapse
it can barely use WM5 and anyway these chinese splash their advertising for WM6 all over the place in hope ppl will buy their rom, until I see it running in my device or get confirmation from someone reliable (such as Jiggs) I dont believe a word of it and besides the 3.3.3 rom is very fast and ten times better than any actual official release
yes i tried to that method too. it is same it still stuck on o2 screen. it doesnt pass to align screen..please help me
my problem didnt solve pls help me i cant use my atom..........
plsssssssss help meeee...........
plsssssssss help meeee...........
R U able to go to bootloader mode ?...
ironeagle said:
R U able to go to bootloader mode ?...
Click to expand...
Click to collapse
try to be on the bootloader and reflashed the ROM. try to search same cases in the forum. I think they solved the problem alike.
yes same to problem. i dont re enter bootloader again :S
did DSUU Recognize your ATOM ?..
Connect your ATOM to PC (using USB)
Run DSUU
Try to flash it..
i can enter bootloader mode and i can update rom but after this proccess it says "device clean boot......" and it freeze . it doesnt pass to align screen
plssss help meeeeeeee.
Which ROM you flashed?..
i flashed orginal atom rom i downloaded from seeo2.com
pls helpppp meeeee my atom is dead
are u using o2 atom exec or just atom?
cuyz i've got o2 atom exec..maybe i could flash it with o2 atom (yeah i cant flash anything with dsuu)
mine is o2 atom
did u amend any thing from the original ROM from seeo2? I mean you flash your atom with the original ROM...0426? without replacing the extended ROM...etc?
Hi guys,
Hi,
I'm a hp rw6828 user and is very much enthusiast to try out those wm6 roms made by those experts. However, i did a mistake while trying to flash.
I tried flashing with a rom from wantat but i forgotten to delete the EBOOT.nb0 before i clicked "upgrade". Then the program stopped at 6% for a long time and didnt move. I disconnect the cables and tried to turn the device on.
THe device can go into the wm6 and the start button can be use but the screen is "moved" to the right side and other function is not working.
After that, i did a hard reset and the the os seem to work like normal. However, when i tried to go into bootloader mode by pressing both "_" and soft reset. That didnt work. I tried another way by taking out the batt, leave it for a 10mins, press both "_" and soft reset, put in batt, release soft reset then "_" keys. That didn't work either.
But, just lately, i've tried taking out batt, holding the camera key and softreset, place back batt, release soft reset n camera button. This method works and i get what it seems to be an atom bootloader?
i get a black background with "MN1 Bootloader Mar 29 2006 13;52;14 copyright..... 1) debug module through UART 2) jump to DM Enter your selection.
I've searched the forums and found few ways to downgrade back to wm5 but those aren't the same conditions with what im facing. Can someone recommend how can i downgrade back to wm5 with the conditions that im facing? All you help is much appreciated. THank you.
You are lucky , at lease your device now become atom. My was totally cannot on power and just vibrate. Till I have to sent it back to HP SC and change the main board . Can you understand chinese , if yes than I have a solution you may try . Else you have to wait . I just download a program and doing some testing , the program is in chinese language .
Thx for you reply. I guess u can say that. I'm from msia but cant read chinese.
Is it possible to solve the problem by sending back to hp using warranty claim? I think i still have warranty left but its ending very soon. One more week i think.
elus said:
Thx for you reply. I guess u can say that. I'm from msia but cant read chinese.
Is it possible to solve the problem by sending back to hp using warranty claim? I think i still have warranty left but its ending very soon. One more week i think.
Click to expand...
Click to collapse
I don't think you still can claim under warranty unless you can make your phone total can't on and access to windows mobile. Last time I sent it back they charge me RM 385 to change the main board . I did talk to their technical personal , it seen like they don't know what is bootloader and flash it back to original rom . What they do was just change the main board with preloaded program .
Good luck
If you think that you can claim you warranty , than you just go a head . If not , may be you can access my thread "HP6828 WM6" , download any one of the rom that I post , follow the instruction accept downgrade bootloader . Enter your phone in bootloader mode . If you can start the process , than it will flash a new hp bootloader into your phone .
Against . Good luck
Cheers
I'm from malaysia also.
Ok. I'll try your method to restore the bootloader. Thx for the fast reply. I'll keep u update with the progress. Thx again.
elus said:
Ok. I'll try your method to restore the bootloader. Thx for the fast reply. I'll keep u update with the progress. Thx again.
Click to expand...
Click to collapse
You've flash ATOM Bootloader, there are many ways to restore to HP Bootloader ... don't worry !!!
nhocbanme said:
You've flash ATOM Bootloader, there are many ways to restore to HP Bootloader ... don't worry !!!
Click to expand...
Click to collapse
Can share the information how to restore back the HP original bootloader ? And the procedure . Thanks
First you must have HP bootloader file (Eboot.nb0) 1.01 or 1.05 are OK.
- Use DRUU to restore Bootloader : replace ATOM bootloader file with HP bootloader file
- Use miniSD to restore Bootloader : copy Eboot.nb0 to miniSD card, go to bootloader ... wait 1' it will auto hard reset.
After flash successfull remmember remove Eboot.nb0 from miniSD.
- Reflashing Bootloader using JTAG. (Use only when can't use two above menthods)
HP Bootloader 1.01 : http://rapidshare.com/files/82853862/HP_BL1.0.1.rar
HP Bootloader 1.05 : http://rapidshare.com/files/82853924/HP_BL1.0.5.rar
nhocbanme could you please specify which specfic DRUU should be use for your method? Thank you.
You should use DRUU of Chartreux, replace Eboot.nb0 and choose OS and Eboot
Remember copy a HP68xx ROM (diskimage_Ver.nb0) to C:\Windows\Temp with DRUU of Chartreux then start...
nhocbanme, you explanation seems vague to me. Probably cause im still new. Could you please give a clearer instructions? Thank you
elus said:
nhocbanme, you explanation seems vague to me. Probably cause im still new. Could you please give a clearer instructions? Thank you
Click to expand...
Click to collapse
-You must extract RUU in C:\Windows\Temp (no sub folder) then replace Eboot.nb0 with Hp bootloader 1.01/1.05
-Copy a diskimage_Ver.nb0 (any ROM WM6 for HP 68xx) to C:\Windows\Temp
-Run the DRUU program and choose OS and Eboot and start.
Goodluck !!!
It worked! Thx a lot nhocbanme and wantat. The methods restore the atom bootloader to hp bootloader. The DSUU by chartreux is a good tool.
Now, i would like to put this solution up into the wiki. How may i do so? Thank you.
hi, im william from M'sia. i like to know how you recover your previous installed AtomROm back to WM5.
can u provide some step to step detail
if possible upload some files can let me flash from memory card in the bootloader screen
ur reply are highly appreciated
thx ~~
williamSun said:
hi, im william from M'sia. i like to know how you recover your previous installed AtomROm back to WM5.
can u provide some step to step detail
if possible upload some files can let me flash from memory card in the bootloader screen
ur reply are highly appreciated
thx ~~
Click to expand...
Click to collapse
OK, please read my topic, I'll post a WM5 ROM flash via miniSD
help !!
im facing another problem again...
this time i changed the file extension EBOOT0502_MNT_01.01.03.nbf to EBOOT0502_MNT_01.01.03.nb0
(file from HP official WM5 SP34074, inside the installed folder )
and copy to memory card and put in 6828 then started to go bootloader screen
few minutes later my screen goes blank, and i tried with the revive methods
which is
-press the 2 softkey " - " and reset button
-put in the battery ,
-release reset, then release softkey
but didt work out!!!!no repsponse at all..tried many times..possible dead ad???
plz help me abit ..big troblem!
I dont think i can help u much here as im still new. From the looks of your problem, i guess u forgotten to cut the first 12bits (or something like that) of your bootloader when u use it to flash via mini sd. Maybe you can try the JTAG method mentioned in the atom wiki to restore your bootloader. Good luck.
Thanks guys!
The same exact thing happened to me yesterday..I was already about to sell my ipaq as a dead unit and i came upon this thread and after following the steps it did made ipaq alive again..
thank you very much guys,i hope you continue to help more people..
god bless and best of luck to you
more power xda-dev!
i buy atom pure from my friend,i have problem to revert back.this atom pure already upgrade to atom exec window mobile 6 profesional 5.2.1413 (18508.0.7.0).but have problem with phone,cant make a call os sms.now im planning to revert back to wm5 original. i already try download original rom Xda-Atom-ENG-20060426-MOT0822.exe but still cant flashing.and show "eror:connection eror"
do i need flash my bootloader 1st?then running then run Xda-Atom-ENG-20060426-MOT0822.exe ?
what file need to copy in the sd card?
nitrospeed said:
i buy atom pure from my friend,i have problem to revert back.this atom pure already upgrade to atom exec window mobile 6 profesional 5.2.1413 (18508.0.7.0).but have problem with phone,cant make a call os sms.now im planning to revert back to wm5 original. i already try download original rom Xda-Atom-ENG-20060426-MOT0822.exe but still cant flashing.and show "eror:connection eror"
do i need flash my bootloader 1st?then running then run Xda-Atom-ENG-20060426-MOT0822.exe ?
what file need to copy in the sd card?
Click to expand...
Click to collapse
Try press "camera button" + "reset button" then plug your usb cable and
run your original rom.
Cheers,
Benz
still cant flashing."error : connection error"
nitrospeed said:
still cant flashing."error : connection error"
Click to expand...
Click to collapse
Have you installed activesync 4.5 btw??? If yes continue to read below, if not get activesync first.
change USB cable, it may be deffective. any cable will do, motorola, canon digicam et al. then try steps below
put device in bootloader mode: camera button + reset hole
plug usb device then run original ROM.
read the wiki thats why it's there!!!!
maybe help
try flashing it while its still connected via active sync and not in the bootloader mode if its still show error connection mode then it must be the rom is not compatible for ur device or there is really a problem with the connection
ok i found the solutions.i try search for 2 days.then i found this.
http://www7.discuss.com.hk/archiver/?tid-5578529.html
now im working on it.i hope it successfull
I have a problem when Upgrade WM 5 to WM 6.1
when i upgrade my atom pure from WM 5 to WM 6.1 is success, and than i downgrade from WM 6.1 to WM 6.0. after flashing the device reboot and than the atom only vibrate and blank on the screen.
I try to hard reset it's still vibrate only and cannot load bootloader screen...
so somebody please help me....
ps : sorry my english it's not good, i hope all of you understand what i mind...
thanks
If you still haven't solved you problem:
you can simply pull out the battery while pressing and holding down the camera button AND reinserting it while still holding the camera button down.
then once you release the camera button.
it should boot
This worked for me and my atom loaded to the bootloader and i was able to successfully flash it