My HD2 was orignally running the Topix rom fine for about 3/4 months, but one day it starts playing up and not booting properly. So i wiped the phone using MTTY (task 29), but now i cant re-install any roms, the installation hangs at 3-4% and the HTC sign during installation looks fuzzy andthe phone reboots into the bootloader.
Ive tried changing radios, but again, the installation hangs.
The bootloader screen looks weird it reads:
a-_aaa-_a HX-BC
SPL-1.42.HSPL XE
0x05
CortullaHSPL 0x30
Currently the phone has been wiped, i.e. there is no OS on it, just the bootloader screen.
Ive tried flashing back to the original SPL using the SD card method, but when i try booting, the phone restarts once the screen goes grey and gets to 'checking'.
Is there any way to fix this? Any help will be really appreciated!
ns807 said:
My HD2 was orignally running the Topix rom fine for about 3/4 months, but one day it starts playing up and not booting properly. So i wiped the phone using MTTY (task 29), but now i cant re-install any roms, the installation hangs at 3-4% and the HTC sign during installation looks fuzzy andthe phone reboots into the bootloader.
Ive tried changing radios, but again, the installation hangs.
The bootloader screen looks weird it reads:
a-_aaa-_a HX-BC
SPL-1.42.HSPL XE
0x05
CortullaHSPL 0x30
Currently the phone has been wiped, i.e. there is no OS on it, just the bootloader screen.
Ive tried flashing back to the original SPL using the SD card method, but when i try booting, the phone restarts once the screen goes grey and gets to 'checking'.
Is there any way to fix this? Any help will be really appreciated!
Click to expand...
Click to collapse
will the phone connect to the PC in bootloader mode?
Try flashing a radio over USB, just the radio, not the whole rom, see if that changes your bootloader,
The phone does connect to the PC in bootloader mode, but the phone reboots after a few seconds of starting the radio flash, the same things happens when trying to flash a new rom.
hspl
id reinstall hspl see if that works if the writing changes then try flashing a new rom
otherwise it sounds like your doomed
Related
PLEASE MOVE THIS TO THE TMOBILE HD2 SOMEONE
Hey guys, i'm trying to get a replacement for my HD2 since I believe i've gotten a bad shipment one however i'm running:
R 2.10.50.26
G 15.39.50. 07U
D 2.13 KUMAR C5
[this is what appears under the stick together when it freezes]
I downloaded the 2.13 stock ROM from the website here, opened in winrar, extracted the ruu file, reformatted my microSD to a FAT32, placed the file on it and renamed it to LEOIMG and then helpd down the down vol button and hit the power button, it flashes the rainbow screen thing, flashes loading really quickly then goes back to the rainbow screen and says the following [pic included but taken from a crapberry so sorry it's hard to read]
[apparently I can't post pics? so here's what it looks like I can provide a picture link via PM unless I get verified]
[RED BLOCK]
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x05
[GREEN BLOCK]
[BLUE BLOCK]
[WHITE BLOCK (also says serial)]
Any ideas why I cant flash the stock ROM so I can return this without voiding the warranty guys? It'd be much appreciated.
Also if it matters i'm using the TMobile 1024 HD2. I just got it about 5 weeks ago
trying to use a 16gb sd card? 99 times in 100 they fail. (well, the one that came with the tmous does anyway)
You dont need to use card tho...
assuming you have a tmous phone, (you didnt say, and you're posting in the regular leo section, but im gpnna assume you have a tmous)
1 - run hspl3 - choose 2.08.0000
2 - flash the stock rom 2.13 using usb
done
I'll give it a shot and leave an update, apologies if I posted in the wrong area. The reason i'm trying from an SD card is because for some reason the phone keeps freezing and I pull the battery 10+ times a day and it gets stuck at the stick together screen alot [i'm assuming i'm having some issue with it hardware like a bent pin but since it's getting power i'm not sure???] I figured an SD install would go smoother. My windows Vista doesn't seem to like it too much
dont worry about it not booting, so long as you cam manually get into bootloader, you can run hspl and do usb flashes from there. The phone doesnt need to be booted.
As for teh pins, they should all stick out at teh same angle (i.e straight out, all teh same)
OK update:
I tried formatting my good 4gig SD card, put the file on it leoimg and it ran, got to the installing, gave an error, I took it out now. I go into the bootloader now [just read your reply] and it says
RUUNBH
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0x05
cotullaHSPL 0x50
[green box]
Upgrade ROM code error Please try again
[Blue box]
[White box]
USB
I have it plugged in via USB now and i'm in the bootloader so i'm guessing this is a good sign, I try running HSPL3_PKG.exe so I can do as you suggested however I get a rapitool.dll error or something, I tried just running the T-Mobile_HD2_MR_Software_2.13.531.1 which is the ROM exe and get some rapitool error as well so I get this genius idea that it must be the lack of windows mobile center6.1 or whatever. I go, download the 32bit and it says its not supporting my processor? so I got the 64 bit and have the feeling i'll get the same error. I'm running Windows Vista, AMD turion x2 so I think it's a 64 bit. I'll reupdate once I try it all again.
UPDATE AGAIN:
I installed windows mobile center [I needed the 64 version dur de duur]
I ran the HSPL3_PKG and got it back to the 2.08.0000
I went to run the 2.13 update and it freezes at 9%, says that theres an error 290 invalid command. I tried to redownload and try again afew times to no luck so far. Here's what the bootloader says now
[RED BOX] RUUNBH
PB81120 ss-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
[GREEN BOX]
Upgrade ROM code error Please try again
so on and so forth.
any ideas would be appreciated lol
CURRENTLY TRYING:
Downloading the stock ROM from that thread [one that's shipped without the SPL?] hopefully it works when I try to run this one and I can just take it back finally. If not and if noone has any ideas i'll just try to bring it back without a ROM on it [I think that's whats happened now] and just say that I tried installing the official update off the tmobile site and power died somehow and I have no idea what happened maybe?
MOST RECENT UPDATE:
OK so here, I got the shipped stock ROM, loaded it up on the microSD and it goes to loading when I go into bootloader and stops. I tried via USB and bootloader and it never makes it past 0% and just stops. I'm currently assuming that there's no actual ROM on my HD2 for now?? When I run the 2.13 ROM by TMob it shows the upgrade from [blank, there's nothing there] and then to: 2.13 before it errors as I have mentioned before.
Currently i'm running out of ideas, I certainly hope I didn't brick my phone and there's gotta be a away around this somehow. If there's nothing there I should try to put HSPL back on and try another custom ROM perhaps? hmm. I'll give it a try since i'm at a loss and noone seems to have any ideas. Please if ya do feel free to share them, I wish I didn't have to experiment like this on my own with not too much knowledge on mobiles. My computer knowledge rests in networking and random bits like Java :s AP comp sci helps not here
*insert happy dance*
slowly but surely i'm learning my way around this...I think
I have done the reverse now and got HSPL back on my phone. Currently I'm trying to install wither the stock rom via USB and bootloader or the Energy.Leo ROM one though both keep freezing about halfway through the install. It's rather annoying because it's happening at what appears to be random times. I'm still considering goign back to SPL and claiming their official update fragged my phone and I have no idea how but I want to keep this trying.
you're sending it back, right? well only the spl is important, doesn't matter about the rom.
so long as in bootloader it says 2.08.0000 or 2.10.0000 then you can send it back.
I think from what i'm hearing your Radio partition is **** up.
Or ur CID isn't working correctly.
Try flashing stock rom with a goldcard....
Or do a task29 and flash stock rom again.
Ended up figuring it out finally, afew days ago, new HD2 should get here tomorrow. I ended up putting the HSPL back onto it, flashing a custom ROM, upgrading it via USB/boot loader screen to the stock ROM that it came shipped with then downloading tmobiles from their site and putting the update onto it and everything is currently as it should be. Radios, ROM and SPL
I am trying to get Android 2.2 on my HD2. I was able to successfully flash my HSPL. However I am having trouble flashing the radio and the winrom. Everytime I try to flash a winrom or the radio my phone reboots and the red, green, blue, and white screen appaers and of course the flash fails. I orginally started out with the spl 2.10.0.0 and I was able to successfully flash that to spl-2.08.HSPL using the HSPL3 exe.
<
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
>
This is what I see on the red, green, blue, and white screen. I can then pull the battary to reset the phone but I still does the same thing when I reset it.
How do I get the phone to stop rebooting and allow me to flash the it with a winrom. Thanks for the help.
I See you have TMOUS.
First of all: NEVER flash 2.xx.51 Radios this will result in a brick.
Now onto your question:
What exactly are you trying to flash, and how?
The rebooting into the coloured screen is expected behaviour.
This will remain a bit, then flashing will start.
Are you not to quick?
What acually happens? Does your flash reach a certain percentage?
Have you tried flashing back the T-mobile shipped ROM (via SD Card)?
I am trying to flash the NRG Cookies rom or the NRG GTX rom or the Asterois Standard rom, and I was going to flash the 2.11.50 radio since there was no CUU in the 2.12.50.20_2 radio download.
When I plug my phone up to my laptop and connect it to activesync the connection is good and works well. Once I go through the CUU for any of the above mentioned after I click on the "flash" button the phone turns off the connect to active sync dies and the colored screen comes up, then the CUU comes back telling me that there has been an error and my device is more longer connected and the flash was unsuccessfull , the flash process ever gets passed 0%. Then I have to remove the battery from my phone in order to get it to reboot, and it reboots just fine back to stock windows. Ever tried flashing back to tmobile rom (1) because the rom has never been flashed and (2) because i did not know that I could or even how to.
If Im reading this right your HSPL is 2.08?? If so then your good to go with that HSPL. My HD2s were always 2.10 out of the box. I would use Cotulla HSPL3 and hack it to 2.08 and be done with it. Now you can flash a new radio over and the ROM of your choice. Just a small piece of advice. Done flash a radio under 2.10. For me radio 2.11 works great on all the Androids Ive used and WinMo ROMs. Enjoy
Thanks for all the help guys. I figured out what I was doing wrong.
The problem was that I was using Windows 7 on my MACBook and everytime the rom started to flash the device would discconnect from the VM of windows 7. So I tried to flash it on my windows 7 box and the radio and NRG rom flashed flawlessly.
Thanks for all the help.
Hi there,
i got a problem with putting android 2.2 on my HD2. when i press HARET, it gives me a screen where i can press run, but than i got a message saying "Cannot open script file\Storagecard\default.txt"
Maybe the problem is in the file i downloaden on this site. when i downloaded it, ther is in the map STARTUP CONFIG an map called HD2, but the file in there says "for future release for HD2"
do you guys know the problem?
hai guys i hav got a htc hd2 and its in white screen
can any one plz help me to solve this problem
actually i'm new with dis pocket pc
here the info is.
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
did you do anything to your device ?
i'm asking because i have the same problem and didn't do anything at that time, i had a few freezes which forced me to remove the battery and now its stuck on the white screen, i can't flash anything either. I wasn't trying to either before this happened to me, i had winmo 6.5.x running for months, pretty much untouched since i only use android now.
.) i did a hard reset, which went really fast and did nothing.
.) tried hspl 3 ( it says succesfully flashed, but when i load the bootloader the previous version is being displayed there.
.) tried to flash:
-stock rom from sd, i get stuck in the bootloader "serial"
basicly it just does nothing...
i used a 2gb mirco sd card for that, formatted in fat32. stock rom extracted and renamed the RUU_signed.nbh to leoimg.nbh. volume down + reset
-stock rom from pc/usb connection, error/timeout at 0% saying connection problems.
im running out of idea's, i got 1 month warranty left, but im afraid that it will do me no good since i used hspl
You need to update your spl to 2.08.hardspl AND you mostlikely need to flash your radio as well.
I found out that i made a mistake while trying to flash from sd, i didn't put the leoimg at the root of the sd so it didn't get detected. I managed to get rid of the white screen after flashing but its nowhere near functional. It also gave me an error during the flash, but it carried on and finished the flash eventually...
Now when i boot winmo it says something about microp mismatch, i tried two different roms to make sure it had nothing to do with the rom i was using, it didn't... i had the same problem with both. So my guess is that something is damaged, at least hspl is gone now so i can make use of my warranty again, for the people that don't have warranty left i hope somebody comes up with a solution, if there is one, everything points to hardware damage from my point of view. Would be interesting to know how your problem developed...! anyway good luck
arminneman said:
I found out that i made a mistake while trying to flash from sd, i didn't put the leoimg at the root of the sd so it didn't get detected. I managed to get rid of the white screen after flashing but its nowhere near functional. It also gave me an error during the flash, but it carried on and finished the flash eventually...
Now when i boot winmo it says something about microp mismatch, i tried two different roms to make sure it had nothing to do with the rom i was using, it didn't... i had the same problem with both. So my guess is that something is damaged, at least hspl is gone now so i can make use of my warranty again, for the people that don't have warranty left i hope somebody comes up with a solution, if there is one, everything points to hardware damage from my point of view. Would be interesting to know how your problem developed...! anyway good luck
Click to expand...
Click to collapse
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
kabir.581 said:
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
Click to expand...
Click to collapse
Yeah sure i can do that, but before i do you need to tell me how you got that white screen in the first place. If it's not because of a failed flash attempt you probably want to keep your phone as it is now, so you can make use of your warranty... hspl makes that impossible!
It's probably a hardware problem, i looked up on that microp mismatch and it looks like a hardware failure, updating your software isn't going to solve that, it might solve the white screen issue, but the phone itself won't be functional. Try to explain what happened so i can give you proper instructions on what to do.
If you can start your phone and enter the bootloader there is no need to sent to service.
Enter bootloader and flash from there HSPL 2.08, and flash radio too.
After that flash MAGLDR and android rom.
guys as i have posted in my last post
that was a condition i have received from costumer.
i guess he tried to update it...
kabir.581 said:
guys as i have posted in my last post
that was a condition i have received from costumer.
i guess he tried to update it...
Click to expand...
Click to collapse
With the phone off, press and hold the Volume Down button and then tap the Power button.
You will get a multicoloured screen with the word 'Serial' at the bottom. What else does the screen display?
What country and phone operator is the phone locked to?
if you want to install a custom rom or eventually android you are going to need hspl, there are enough guides and tutorials on how to do that on this forum, search for it.
if you just want to bring the phone back to life, running windows mobile, you can go to the htc website. Go to the support section and select your phone and look for available rom updates for your phone/serial number.
connect your phone to the pc and follow the instructions of the setup and upgrade... if the phone doesn't get detected, extract ruu_signed.nbn from the setup file and rename it to leoimg.nbn
put that at the root of your sd card formatted in fat32 and boot your phone holding down the volume down button. Follow the instructions, when its done you can reboot the phone and hopefully you can make use of it
berbecverde said:
If you can start your phone and enter the bootloader there is no need to sent to service.
Enter bootloader and flash from there HSPL 2.08, and flash radio too.
After that flash MAGLDR and android rom.
Click to expand...
Click to collapse
Not really, i was able to do that and even flash an upgrade on the phone, but not without errors, the phone didn't function properly after the flash, so its very likely that something is damaged in my case. I send my phone to htc so they can repair it.
it displays the info
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
Flash a stock rom... in usb mode..
Sent from my HTC HD2 using XDA App
hey guys i tried to download rom from htc support area
but it asked me to enter serial num when i entered the
device serial it gives error.
The serial number you’ve provided appears to be invalid. Please try again.
could any plz tell me the exact procedure and the links to download
what ever it requires its just because i'm new with this softwares
here the info which i got from bootloader mode is:
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
If you want to install a stock rom you should know what kind of WM has your HD2.
You may not be able to flash any stock rom.There are a lot of versions, regions and it may take some time to try all of them.(http://shipped-roms.com/index.php?category=windows mobile&model=Leo)
If you do not know the version, as you say you have SPL 1.42.
If this is true you can change to HSPL and after that flash any rom you want, and android.
This should solve your problems.
So download the HSPL from the second post. (http://forum.xda-developers.com/showthread.php?t=611433)
Enter bootloader connect the USB cable and flash HSPL.Select 2.08 HSPL from the list.
If you succeed. If you check the bootloader you should see something like Cotulla HSPL 2-08.
Now you can flash any rom you want, the same way: download a rom of your choice, enter bootloader, connect usb cable and start the RUU utility.
If you want to flash android you have to upgrade the radio version.(the same way)
Flash MAGLDR.(the same way).
Flash android.(this is different).
If i am wrong, anybody feel free to correct me.
I would say also do a task29 that contains blank .nbh. you must have hspl 2.08 first to run this then install any custom ROM through PC or your branded ROM through SD card it should work. i hope this helps.
here you go
http://forum.xda-developers.com/atta...0&d=1268260144
dude it works thanks alot
and thanks to every one who has tried to help me
rgds 4m kabir.
Okay i have been going at this for 6 hours trying to figure this out.
I bought a HTC HD2 off of craigslist today for 200$ when the person gave me the phone to try it worked i played around with it and about 20 mins after i started messing with it ( the transaction had been made) it just shuts off. I go to turn it back on and it gets hung on the Stick Together screen after hard resets soft resets lukewarm resets.. every reset on the web nothing works i tried updating it nothing worked (from official firmware)
in the middle of all this it gets to a point where the stick together screen would be there for a split second going blank and the phone would vibrate 7 times.. no one knows what this means even HTC
i look online and people are saying install custom firmware sooo i downgrade from 2.10.0000 to 2.08.0000 and install a custom firmwar Kumar v4.1 touch premium with thier recomended Radio file.. i do this about 3 times.. now instead of "Stuck together" its stuck on the custom flash splash screen.
i tried the task 29 and doing it all over again and im still stuck
HOW DO I FIX THIS? did i just spend $200 on a peice of $#!7 paper weight?
any advice would be helpful.. though "search the thread noob" wont be applicable to me .. i searched it for a few hours to no avail.
if i missed the page please direct me to it instead of being snide about it chewing me out for spam post wont help me fix my problem
Set your device into Bootloader
- turn off device
- press and hold volume down button
- pres shortly on the power button
- you will see now a 4 color screen = bootloader
=> can you communicate us the values you see on your bootloader screen.
And just a question, witch Radio did you install?
PB81120 SS-B3
SPL-2.08HSPL 8G XE
0x05
Cotullahspl 0x50
as for the radio:
Radio Leo 2.15.50.14
therian12 said:
PB81120 SS-B3
SPL-2.08HSPL 8G XE
0x05
Cotullahspl 0x50
as for the radio:
Radio Leo 2.15.50.14
Click to expand...
Click to collapse
I don't see direct reasons of problems based on this information.
Maybe a suggestion is to install a newer stock rom.
that was the first thing i tried when i first got the phone, when that didnt fix it i resorted to installing custom firmware.. right after i went on the forum and posetd i installed artemis custom fw and left the battery out over night and when i woke up i put the battery back in and it worked perfectly.. well almost.. it booted up none of the programs would work no camera no game nothing it always said either program wasnt set up or there wasnt enough memory on the phone. so i turned it off ( huge mistake) and put the most recent stock firmware on it after reverting the HSPL back into the SPL 2.08.0000 and its stuck on the stick together screen again
Can you get it into BootLoader Mode, as I suspect that the SPL is still 3.03.0000
You cannot use HSPL3 when you have a 3.03.0000 SPL on the phone.
What stock ROM are you trying to flash?
T-Mobile_HD2_MR_Software_3.14.531.1
thats the name of the file i downloaded to do it .. i reinstalled the stock SPL and tried upgrading it to the file ^^^^ left the battery out for 30 mins plugged it all in , it booted does alot of stuff but when i touch the camera button it froze shut down and locked me out again at the Stuck together screen.
im willing to donate 30$ to whoever can help me fix this
i have more info about the crashes and whatnot
today i have been keeping a record of how long the phone is on for and what im doing when it crashes and wont reboot without keepign the battery out for 15+ minutes
turning vibration on for ringer was only on for 5 mins
using the camera not even taking a picture just looking through the lense on for about 15 mins
trying to send a text message on for about 10 mins
just now had one whil just letting it sit there after 15 mins
i have still been browsing the forums for solutions im thinking it could be the radio file im using that futzing up so ima try that
also .. WTF does MTTY actualy mean .. is it a more formatting formatting utility .. or.. what?
Okay so i updated the radio to Leo_RADIO_2.15.50.14
and now when i turn on the phone it vibrates 7 times with no image
if i leave the battery out for 15+ minutes it boots up just fine till i start to actualy use it. i can play a video listen to a song but i turn off data and then turn on wifi and it locked up on me, only way to get it to turn back on is to pull the battery and let it sit for 15+ minutes again.
soo no one has any idea on whats going on wrong here?
sorry for posting so many times.. i just am without phone and it sucks
try to install artemis rom again with sspl
sspl thats stock spl right?
my phone is at 2.10.0000
therian12 said:
sspl thats stock spl right?
my phone is at 2.10.0000
Click to expand...
Click to collapse
no sorry install latest stock rom thn you should have spl3.03.00
after that you shoul be able to flash artemis with sspl becouse you cant flash on 3.03.00 thats why we use sspl if you dont have it i can sent it to you
i just install stock SPL package from tmobile's website when i enter boot loader it says my SPL version is still
SPL-2.10.0000 8g XE
therian12 said:
i just install stock SPL package from tmobile's website when i enter boot loader it says my SPL version is still
SPL-2.10.0000 8g XE
Click to expand...
Click to collapse
try to flash spl1.42 with hspl3pkg and bthen try to flash artemis rom
how do i do that?
well all this trouble for nothing... after installing the Energy rom i wanted to try and install the stock rom again , converted the HSPL 2.08 back to stock went to put the phone back in bootloader mode and its a brick...
try to contact this member maybe he can help you
you should contact the member of this forum by the name of trashcan... he is the only person in the united states that has the jtag device used to re program the hd2
Hi
I have a flashed HD2 with these problems.
In Bootloader it says
PB81100 SS-BC
SPL-208.HSPL 8G XE
0X05​CotullaHSPL 0X50
If I try to install HTC RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe it breaks after 1% it says 270 error
HD2 reboots and again white Screen. When I put off/on battery and press Volume down I see bootloader display.
I tried to flash with sd Card, leoimg.nbh on the sdcard breakes after 10%
it says
00018003
LEOIMG.nbh -FAIL
Radio-Fail
I think I have a bootloader problem. How can I remove SPL-2.08.HSPL 8G XE and set the new orginal SPL ?
here bepe says :
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=611433
I made it with HTC
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
but I can't remove HSPL from my bootloader.
How can I set my bootloader back to original htc ?
the topic can be closed
this has solved my problem
http://forum.xda-developers.com/showthread.php?p=24876999#post24876999
I had installd Windows 6.5 everthing was working perfect, then I tried to install Android and clk mod now I get the same in the 1. Posting from me.
I have SPL-3.03 HSPL in the boatloader but I get allways Error 270 I can't uninstall 3.03 HSPL
does anybody have an Idea?
Radio_2.15.50.14.nbh installation fails, but custom rom like energy sucesses. After that again white screen
nobody knows the solution?
You have a stuck radio. Fairly common, with a variety of symptoms. The radio wont let itself be changed which is why custom roms and splashscreens don't have a problem.(radio gets flashed at the start of flashing which is why it always fails around 8-10%) This issue can affect spl to a greater or lesser degree, some people can change spl some can't, some find flashing an older (but correct for that phones cid and region) stock rom, some find chilling the phone allows the flash to take allowing the radio to finally change, some never get anything to flash again.
hi
thank you for your answer. My Bootloader shows
SPL-3.03.HSPL XE
0X05
0X50
if I try to run Task29 via USB Cable, I get Error 270, it breaks sometimes at 16%
reflash 3.03 HSPL with HSPL 4 says it is successfull, but if I try to flash a rom with usb again it shows 270 Error, so my logical deduction is, reflash with HSPL4 does not really flash and it gives wrong answer because others like task28 leo customRUU can't flash over usb cable. HSPL 4 says success but this answer must be fake, after reboot 3.03HSPL remains in the bootloader, I tried to downgrade to 2.08HSPL no chance,
My System is Windows XP SP3 when I connect USB Cable to my HD2 it shows USB in the bootloader but why does it break if I try to flash over USB Cable and give an error 270 ? there must be a connection problem between my laptop and HD2.
I would like to know
Is there any way to flash HSPL4 over microSD card?
Can I see which Radio Rom has been installed ?
its a bit strange
Radio Rom Radio_2.15.50.14 istallation via USB Cable fails after 4%
and via microSD Card ~96-99%
I get
00018003
what can be the reason?
ParmakSokan said:
what can be the reason?
Click to expand...
Click to collapse
as i said,. you have a radio image that isnt allowing itself to be overwritten. My name for it is 'stuck radio' and some people fgind the radio still works fine with, for example, custom roms, it just cant be changed, others find the phone always hangs on grey bootscreen, yet more find taht hspol/spl flashes seem to work but nothing changes, some find chilling it in teh freezer lets a rom flash and suddenly all is well, and yet more find the freezer trick seems to work but doesnt, and yet more try and try and try to sd card flash with their CORRECT stock rom and suddenly without warning teh flash works.
My advcie, Prepare yourself for disappointment, but keep trying,and most importantly READING there are hundreds of threads about this.
mobile radio
ParmakSokan said:
nobody knows the solution?
Click to expand...
Click to collapse
hey gys whats this radio in mobiles... have searched and searched but no ans.....