Please please help
I have read lots of threads and have downloaded the radio i need (2.07.50.27) to run the rom i need (sense 2.5 cookie). It says to Rename the extracted file to "RUU_Signed.nbh" (already is named that when extracted) and flash with the CustomRUU.
When I try to run CustomRUU through the handset it says it is not a pocketPC application. When I try to run it through the computer, nothing happens.
What am I doing wrong?
Thanks in hoping
baileyjacks said:
Please please help
I have read lots of threads and have downloaded the radio i need (2.07.50.27) to run the rom i need (sense 2.5 cookie). It says to Rename the extracted file to "RUU_Signed.nbh" (already is named that when extracted) and flash with the CustomRUU.
When I try to run CustomRUU through the handset it says it is not a pocketPC application. When I try to run it through the computer, nothing happens.
What am I doing wrong?
Thanks in hoping
Click to expand...
Click to collapse
Hello mate!
First of all: You have HSPL instaled on your device?? If the answer is YES, you could continue.
The CustomRUU.exe is a app for PC, so you need to run it on a PC not on your HD2, OK?!
So, to it work the way it is designed to work, you need to run it as admin (right click on the CustomRUU.exe and select RUN AS ADMIN...).
In case it does not work, you could flash the radio via SDcard (rename the NBH file to LEOIMG.nbh and put it on your SDcard. Enter in the bootloader and it will tell you what to do.)
Read here for more usefull info about flashing your LEO: http://forum.xda-developers.com/showthread.php?t=609477
Keep reading dude!
Hope it helps!
if customruu does absolutely nothing when you try to run it, chances are your anti virus program has disabled it. You need to turn off your av, and then download it again. (just turning off av is not enough, because it has already disabled customruu as soon as you downloaded it.)
I have the same issue.
HSPL is installed on the phone,
active sync is on,
and I have renamed the radio file and put it in same folder as the customruu.exe
I am running it as the administrator (no antivirus on the computer)
Nothing happens when I double click.
I have tried changing radio files, but still no luck.
I have downloaded customruu from 2 different sources to make sure its not corrupt.
Any ideas?
Viktorca said:
I have the same issue.
HSPL is installed on the phone,
active sync is on,
and I have renamed the radio file and put it in same folder as the customruu.exe
I am running it as the administrator (no antivirus on the computer)
Nothing happens when I double click.
I have tried changing radio files, but still no luck.
I have downloaded customruu from 2 different sources to make sure its not corrupt.
Any ideas?
Click to expand...
Click to collapse
firstly, no need to rename the nbh file.
second, was there av running when you downloaded it? some av programs disable it as it arrives.
thirdly, you are right clicking and choosing run as administrator? cos just being logged on as administratior isn't the same. (though its less important for customruu than for hspl)
what operating system?
Hi samsamuel,
Thanks for the help.
I dont have a virus scan at all.
Laptop is running windows xp, there is only one account and it has administrator rights.
I have right clicked > Run As > Following User - there are 2 options, administrator or vik.
Admin account has not been set up, but I had a go at selecting it anyway (no luck),
also no luck with my main account "vik"
in that case only. suggestion i have is use sd card to flash, or try a different comp. sorry.
thanks mate, I have tried it on another computer and it has worked fine.
Updated the radio and now using andriod. cheers for the help
Related
First off, after realising that i needed to unlock my SX56 and ATT/Cingular/Siemens weren't going to help, I ran across the forum. Had a new ROM cooked and running in almost no time at all! Thanks to everyone!
Here's my question: I'm running a slighly modified "A.30.09 ENG Siemens" ROM on a Siemens SX56 (Wallaby). I downloaded PhonExt 1.2 and copied the file to my XDA, but I can't get it to install. I've searched a lot, and read a lot of posts, but I guess Im missing something. I just get a "SetupPhoneExt_PPC2002 is not a valid Pocket PC Application" error message. (I tried running it on my desktop as well, just to make sure I didn't need to that and copy it over...")
Any help would be appreciated.
kylechenier.at.hotmail.com
Try this...
Make sure the .exe file or a shortcut to the .exe file is in your Startup folder on your SX56: My Device\Windows\StartUp\PhoneExt.exe.
After placing this file in your StartUp folder, soft reset, the program will load.
You should see an icon in your system tray when the program is active.
can't even get phonext.exe
I can't get phonext.exe. The file i downloaded from the phonext website is the SetupPhoneExt_PPC2002.exe, which i can't run. Do I need anything other than just the "phonext.exe" file itself? Can I just copy the phonext.exe file from someone, or do I need to run the setup?
am running wm2003 - does that matter?
I'm running wm2003 -- does that make a difference?
You will need to run that setup file from your desktop. I have a copy of SetupPhoneExt_PPC2002.exe that I just ran from my desktop with no problems at all. It is strange that you cannot run the setup file from your desktop. Are you getting an error message or will the file just not run?
I am running Windows 2000 on my desktop. My SX56 is running WM2003 with A.30.09 ENG ROM, and Activesync 3.8.
I am not sure just copying the PhonExt.exe file from my SX56 and emailing to you would work, but I can if you would like.
It worked!
I don't know what was different when I ran it this time, but whatever it was seemed to have worked.
Thanks llwhipll!
Been trying everything on the Internet and managed to make some headway with Monet (Virgin Lobster 700tv) unlock (this might work for Meteor/C700 as well).
1. Firstly you need to get rid of the 'registry security policy' lock.
Download cert install sp.zip:
[see attachment]
a. copy "SP_AllowCertificateInstall.cab" to the root of Monet memory or card
b. Use file explorer on monet to navigate to file. Click to run. Should run ok.
c. Unzip "SDA_ApplicationUnlock.zip" on PC and run "SDA_ApplicationUnlock.exe" whilst Monet is connected via activesync
2. Copy registry editor onto Monet. I used PHM, but others should work. Note install PHM loader on PC whilst monet is connected via activesync. It might install correctly on Monet, it might not. This does not matter. Just navigate on your PC to Program Files\phm and find the .exe file and copy to root of Monet memory or card.
Also nice free remote registry editor here (works from PC whilst phone is connected via activesync):
http://www.breaksoft.com/Blog/Utilities/2005/1/Mobile_Registry_Editor.aspx
Excellent 'free' combined file explorer and registry editor (perhaps for later - after app. unlock) SGS:
http://www.handango.com/PlatformPro...925777&Ntt=registry&productId=195244&R=195244
3. Using phm (or the registry app you like) change the four keys specified in this guide (you might find the above process has already reset 1001 and 101b:
http://wiki.spv-developers.com/HTC_Application_Unlock_Guide
They are:
Under HKEY_LOCAL_MACHINE\Security\Policies\Policies:
a. Change the DWORD named "1001" to 1 (could originally be 2)
b. Change the DWORD named "1005" to 40 (could originally be 16)
c. HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1017 = 128 or 16 (before) 144 (after)
d. HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 101b = 1 (this key might not exist, if so, create it).
4. Restart
5. HOORAY. Now your phone is fully application unlocked.
-----the following procedure is to SIM Unlock, this currently does not work. Possibly spv-services will be updated at some time to work with the Monet---->
6. Now download spv_services:
http://www.spv-developers.com/forum/showthread.php?t=236
a. copy the cert.cab file to you Monet. Select and run using File explorer. it should run fine.
b. Next step. Run SPV_services from PC whilst phone still connected via Activesync. Should unlock ..... however I get checksum error....
Will investigate. Anyone have any luck please say. At least we can now get the phone app.unlocked.
------------------------->
Note: I have read that the phone might again become app.locked if you do a hard reset. If this is the case, just follow the above again.
rgds
colonel said:
(...)
b. Next step. Run SPV_services from PC whilst phone still connected via Activesync. Should unlock ..... however I get checksum error....
(...)
Click to expand...
Click to collapse
So this thread should not be named Full unlock for HTC Monet :>
apparently wen i tell spv services to use simlock tool. it freezes at a blue screen trying to load a php.. this is after i input AGREE into the box..
it opens fine b4 that.. am i doing anything wrong?
bongmaster said:
apparently wen i tell spv services to use simlock tool. it freezes at a blue screen trying to load a php.. this is after i input AGREE into the box..
it opens fine b4 that.. am i doing anything wrong?
Click to expand...
Click to collapse
SPV-Services needs to access the internet.
A php is an active type of web page.
It would appear that there is something blocking it from access the internet. Most probably a firewall on your PC, either the internal windows one, or a 3rd party package you have installed. You need to check this.
If its for the Monet I wouldn't bother anyhow as SPV-Services can not currently SIMunlock this phone.
rgds
colonel said:
SPV-Services needs to access the internet.
A php is an active type of web page.
It would appear that there is something blocking it from access the internet. Most probably a firewall on your PC, either the internal windows one, or a 3rd party package you have installed. You need to check this.
If its for the Monet I wouldn't bother anyhow as SPV-Services can not currently SIMunlock this phone.
rgds
Click to expand...
Click to collapse
1st thing i checked was the firewall..
i know wat a php is i run a phpbb forum and yea it is a Monet (lobster 700)..
shame ( i really need to unlock the networks on it ) i have an O2 sim and wen i put it in it askes for a network unlock code.. if only i had that code.. any idea how to obtain it?
the only way currently is to use virgin or a commercial service
If you put at least £30 of talk time on your virgin account, they will send you the unlock code for free.
Otherwise search google or this forum for a commercial unlocking service.
rgds
colonel said:
1. Firstly you need to get rid of the 'registry security policy' lock.
Download cert install sp.zip:
http://www.spv-developers.com/forum/showthread.php?t=425
Click to expand...
Click to collapse
Hi, I have a question. I would like to try it but the link above shows: Invalid Thread specified. If you followed a valid link, please notify the administrator :-(
burticek said:
Hi, I have a question. I would like to try it but the link above shows: Invalid Thread specified. If you followed a valid link, please notify the administrator :-(
Click to expand...
Click to collapse
Edit: Never mind. I have found it ;-)
Virgin Lobster
I have followed all the instructions
I get an error when running the sim lock to as follows:
Encrypted checksum not found
I then use a vodafone sime and get Network is locked. PLease input unlock code.
Any ideas?
SteveW
classicxda said:
I have followed all the instructions
I get an error when running the sim lock to as follows:
Encrypted checksum not found
I then use a vodafone sime and get Network is locked. PLease input unlock code.
Any ideas?
SteveW
Click to expand...
Click to collapse
simunlock is not working yet on the monet.
this procedure only app. unlocks
rgds
c.
Lobster unlock
What would it cost to do this?
Cheers
SteveW
just phone virgin if yu have a lobster. they require £30 of airtime to be purchased before they give you the code
Application Unlock for HTC Monet
Hi colonel
I have been trying in vain to do an application unlock on my Lobster 700tv. I have managed to install and run the "SP_AllowCertificateInstall.cab" which went ok. The "SDA_ApplicationUnlock.exe" also ran ok. However, running PHM required a copy to be placed on the Monet which I did. Attempting to run the "setup.exe", gave the following message:
"ALERT: Setup is Not a Valid Windows CE Application"
Because of this, I attempted to change the registry keys using "Mobile Registry Editor.exe" which seemed to do the job. However, applications still wont work (I'm trying to install TomTom Navigator 6).
I have since managed to load and run "MobileRegistryEditor.exe" on my phone without problems but I still cannot get TomTom Navigator 6 to run, although it loads onto the storage card ok.
Please can you help?
Regards,
leadweight
leadweight said:
Hi colonel
I have been trying in vain to do an application unlock on my Lobster 700tv. I have managed to install and run the "SP_AllowCertificateInstall.cab" which went ok. The "SDA_ApplicationUnlock.exe" also ran ok. However, running PHM required a copy to be placed on the Monet which I did. Attempting to run the "setup.exe", gave the following message:
"ALERT: Setup is Not a Valid Windows CE Application"
Because of this, I attempted to change the registry keys using "Mobile Registry Editor.exe" which seemed to do the job. However, applications still wont work (I'm trying to install TomTom Navigator 6).
I have since managed to load and run "MobileRegistryEditor.exe" on my phone without problems but I still cannot get TomTom Navigator 6 to run, although it loads onto the storage card ok.
Please can you help?
Regards,
leadweight
Click to expand...
Click to collapse
I also have been trying to unlock my Lobby to no avail.
Used a couple of reg editors but when u change the values the phone comes back "Unable to perform this operation".
I also used the HTC unlocker which came back with the same message.
Lobster headache
Hi bocsta
I had problems to start with but I had failed to read colonel's instructions correctly. I couldn't get PHM to run on my phone so I tried some of colonel's other suggestions. I found that "SGS Explorer" did load ok and I used its registry editor to change the registry keys as listed. I am assuming that my phone is now unlocked but TomTom Navigator 6 will not run.
Can someone please help before I throw my lobster back in the sea?
Regads .....
leadweight said:
Hi bocsta
I had problems to start with but I had failed to read colonel's instructions correctly. I couldn't get PHM to run on my phone so I tried some of colonel's other suggestions. I found that "SGS Explorer" did load ok and I used its registry editor to change the registry keys as listed. I am assuming that my phone is now unlocked but TomTom Navigator 6 will not run.
Can someone please help before I throw my lobster back in the sea?
Regads .....
Click to expand...
Click to collapse
Colonels zip file comes nack as not a valid archive ?
Where can I find the first file in his list being : SP_AllowCertificateInstall.cab ???
Find File
bocsta said:
Colonels zip file comes nack as not a valid archive ?
Where can I find the first file in his list being : SP_AllowCertificateInstall.cab ???
Click to expand...
Click to collapse
The file you require is "cert install sp.zip"
You can get it by clicking on colonels attached files link on the bottom left of his list.
Regards
leadweight said:
The file you require is "cert install sp.zip"
You can get it by clicking on colonels attached files link on the bottom left of his list.
Regards
Click to expand...
Click to collapse
Have you tried downloading it recently The zip file says it is not a valid archive or is damaged ?
bocsta said:
Have you tried downloading it recently The zip file says it is not a valid archive or is damaged ?
Click to expand...
Click to collapse
I have just tried it again and it downloaded ok. I'm not sure why you have had problems - keep trying as it could be just a glitch.
Regards ...
leadweight said:
I have just tried it again and it downloaded ok. I'm not sure why you have had problems - keep trying as it could be just a glitch.
Regards ...
Click to expand...
Click to collapse
Yes it dowmloads OK. I just cant unzip it. Can you try to unzip it please ?
If it fails and you still have the Zip file that you unzipped originally cann you please PM it to me ?
Thanks
It is possible - I've just done it. I'm away from home and I've been using my Hermes (with WM5 AKU 3.3) to get my iBook online all week. Finally WM6 has appeared but I'm stuck with no Windows PC to perform the upgrade...but XDA-Developers gave me all I needed to do it. Here's the outline of how to do it (you'll need to figure out some finer details yourself, but I will help where possible if you get stuck).
1) You need just the .nbh file from the WM6 package of your choice. Unfortunately they are built into Windows installers. I downloaded XDA-Live and extracted the .nbh file using Virtual PC.
2)
i) Backup your storage card.
ii) Format your storage card. (I used a program called "Storage Tools" for this).
ii) Rename the WM6 .nbh file to HERMIMG.nbh and copy it to the root of the empty storage card.
3) Get Des' SSPL program from this link:
http://forum.xda-developers.com/attachment.php?attachmentid=34184&d=1171162518
4) Put the SSPL executable on your phone and run it. Cross your fingers. The phone should enter the bootloader and offer to upgrade the OS using the image it finds on the storage card.
And that's it. Once I'd figured this out, the method is straighforward. The part that has taken me all day is getting the image file extracted from a Windows world and onto a blank storage card using only a Mac and the phone itself (and no other internet connection)!
Hope this is useful to someone else.
Edit: typo.
Great! This method is much safe than other methods that depends on USB because you don't have to worry about someone unplug the USB cable, or if the PC will hang during the flashing process.
Maybe the only thing to check is to ensure that the device to have enough battery for flashing
BTW, how long will it takes for this SD upgrade method?
Brilliant!
Very ingenious solution! I'm not ready to flash yet, I want to see some bugs worked out of the WM6, but when I'm ready will probably try it your way just to see how it works!
Ben
Awesome, I'm using Vista, and I don't want to install XP just to flash Thank you.
Will this work with the Universal? I'm getting Vista soon and I want to be able to reflash if I need to.
Thanks in advance.
ahlok_hk said:
BTW, how long will it takes for this SD upgrade method?
Click to expand...
Click to collapse
I didn't time it but I'd guess it only took about 5 minutes.
You CAN flash on Vista using regular ROM updaters (the .EXEs). That's how I upgraded to AKU 3.3 recently (I don't have an XP machine either).
You do it by connecting in bootloader mode so that "HTC USB Sync" appears in Vista's Device Manager. Then you replace that driver with the one from 2004 (I got mine off the CD that came with the phone). Then the ROM updater works
Now is there a way to exec the sspl.exe on boot? So that some of the bricked users can jump start into bootloader and flash any rom.
unfortunately not... sspl is a wince EXE.
Radio ROMS's
Does anyone know if the Radio only ROM's can be flashed by this method also. If you can do you name the .nbh file the same or use a different name.
You can flash any NBH file, radio os or whatever. But not extracted radio roms in NBF, only in NBH. The file must be named HERMIMG.nbh.
pof said:
You can flash any NBH file, radio os or whatever. But not extracted radio roms in NBF, only in NBH. The file must be named HERMIMG.nbh.
Click to expand...
Click to collapse
interesting... does that include unsigned updates??
walshieau said:
interesting... does that include unsigned updates??
Click to expand...
Click to collapse
Yes, but only with SSPL.... not with the real SPL on device.
pof said:
Yes, but only with SSPL.... not with the real SPL on device.
Click to expand...
Click to collapse
ok now back to the drawing board then... do you know whether the SPL can be forced into Service mode via the RomUpgradeUT.exe file... have been doing some digging around in the DLL's and EXE and found some info about a 'Service' mode....
walshieau said:
do you know whether the SPL can be forced into Service mode via the RomUpgradeUT.exe file... have been doing some digging around in the DLL's and EXE and found some info about a 'Service' mode....
Click to expand...
Click to collapse
Not sure if I understand your question.... the so called "service mode" is what we call "booltoader mode" or "tri-color screen".... just the same.
On normal RUU, the bootloader mode is invoked by EnterBootloader.exe, on custom RUU EnterBootloader.exe file has been replaced with SSPL-HERM.exe.
pof said:
Not sure if I understand your question.... the so called "service mode" is what we call "booltoader mode" or "tri-color screen".... just the same.
On normal RUU, the bootloader mode is invoked by EnterBootloader.exe, on custom RUU EnterBootloader.exe file has been replaced with SSPL-HERM.exe.
Click to expand...
Click to collapse
yes i know that BootLoader is a type of Service mode... i was talking about a different procedure... it looks like a command from the RomUpgradeUT file to signal the bootloader to just to flash the ROM and not check the RUU sig's, model type etc....
walshieau said:
i was talking about a different procedure... it looks like a command from the RomUpgradeUT file to signal the bootloader to just to flash the ROM and not check the RUU sig's, model type etc....
Click to expand...
Click to collapse
That's not possible with the normal IPL+SPL on device, load them on IDA Pro and you'll see what it exactly does, its small enough to follow all the disassembled code with the samsung manual in hand.
so......if i want to flash both radio and wm6,
all i have to do .. is to extract the nbh file from .exe using winrar or something and rename it, put it into a formated sd card.. and run the sspl thing and do the same for wm6 ?
yes hellokittyr, that's right.
Hi pof,
have you tried to digg into the radio ROM as well? Probably with the right manual in hand one could seperate the RBL from the rest and create a 1.35.00.11 radio ROM with RBL 0107.
So I haven't upgraded a Titan in while, but a friend wanted me to upgrade his. It's a US Cellular and I put DCD Reloaded on it and forgot it didn't include the radio. so here's what's going on.
As I said before I put DCDs 4 Reloaded.
I had loaded Nuespl 2.47, BUT now THr bootloader is saying it's back too SPL 1.07.0000.
The RADIO is 1.64.00.
THe ROM is 3.2.6.
It stuck on the HTC load screen. I have tried to load the 3.42.50 Radio via SD, but it will say loading and nothing happens. The SD is formatted FAT32 with 1024 allocation. Being US Cellular I don't have access to the stock ROM. Soooo, in short what do I do from here?
Did you name the radio TITAIMG.nbh for flashing with micro sd? What you could do is re-flash the bootloader (use olipro 2.40). When that is done flash a Official Sprint ROM GPS v 3.35 and up. Then flash the titan reloaded or whatever GPS enabled rom you are flashing.
Hope this helps, I would guide you through all the steps but I am exhausted. You can find all that stuff by searching here or ppcgeeks. The olipro 2.40 is on my share site. Sprint ROMS you can get some from htc and some from searching forums.
RyanMogul6800 said:
Did you name the radio TITAIMG.nbh for flashing with micro sd? What you could do is re-flash the bootloader (use olipro 2.40).
Click to expand...
Click to collapse
I have been trying that. OK so with the SD flash which I have never done before this time. Do I put the Unlocker and the Radio on the card at the same time or do I do them one at a time? Thanks in advance.
One at a time. It is not possible to have two files named exactly a like on a card at the same time.
drewcam888 said:
One at a time. It is not possible to have two files named exactly a like on a card at the same time.
Click to expand...
Click to collapse
Ok but the unlocker and the Radio DO have different names. Though I have been trying to added them one at a time, however on the bootloader screen it will say "loading" for either half a second or will freeze on "loading". The end result is still nothing changing, same SPL and same Radio. Im following ever thing to the T form the wiki, but it doesn't seem to work as they say it will.
The unlocker need to be done first.
drewcam888 said:
The unlocker need to be done first.
Click to expand...
Click to collapse
I do this and it doesn't "update" anything I formated the SD in FAT32 w/ 1024 allocation, put the unzipped unlocker onthe card boot the phone in to the boolaoder mode it will load for like a half second and go back to the bootlaoder but the SPL doesn't update it stays stock 1.07.0000. I don't get what I'm missing?
I really don't know what unlocker you are using. But I haven't heard of an unlocker that can be run in bootloader. For example 2.47 can be opened in WM. I thought you might have found the .nbh for a unlocker but it sounds like you are putting a zip file on the card which won't work.
drewcam888 said:
I really don't know what unlocker you are using. But I haven't heard of an unlocker that can be run in bootloader. For example 2.47 can be opened in WM. I thought you might have found the .nbh for a unlocker but it sounds like you are putting a zip file on the card which won't work.
Click to expand...
Click to collapse
I'm following these instructions.
Upgrade via the microSD (<=2GB) card
(Thanks to No2Chem - donate here)
IMPORTANT: The nueROM web site indicates that nueSPL version 2.47 is designed for the HTC Titan with GPS enabled only (ROM versions 3.xx or higher). Any other device will be permanently and irreversibly damaged by this version of boot loader. (Please use your OEM's latest signed radio ROM to get to this version or higher before trying to install.)
Copy the nueSPL-2.47.exe file from the nueSPL-2.47 package onto your device. (A PDF file with instructions is also included in the package.)
Using File Explorer, run the nueSPL-2.47 application from where you copied it, read the license agreement, then press CONTINUE if you accept.
Read the prerequisite screen carefully. If it indicates that you do not have a FAT32 formatted partition, you will need to format your microSD card by pressing FORMAT (WARNING: this will erase any data on the microSD card).
If you meet all of the requirements, press CONTINUE. It will take approximately 10 seconds for nueSPL to copy the TITAIMG.nbh ROM to your microSD card, then nueSPL will automatically reboot your phone in order to load the ROM.
After the reboot, you will be prompted to press the POWER button to begin updating the new SPL boot loader. Once the installation is complete, the phone will reboot.
Allow your phone to fully reboot. Once your phone is rebooted, open File Explorer and inspect to see if your storage card contains the file TITAIMG.nbh. If it is present, delete it before continuing.
Press and hold the CAMERA and POWER buttons at the same time and hold down the RESET button (with stylus) until you enter a multi-color bootloader screen. You should see a screen that says SPL-2.47No2Chem Titan SPL EVT. If you see this text, your SPL has been sucessfully updated. If you do not, press the RESET button and start over from step 1.
I don't get where I'm going wrong?
Are you able to boot to windows to even run the .exe?
if you are unable to boot the phone bc the rom and radio do not match and you say that the spl is stock you won't be able to change it to unlock without being able to boot into the phone to flash the proper spl onto it to ublock it. Here is what your choices are.
Go to HTC's website http://www.htc.com/us/SupportDownload.aspx?p_id=75&cat=2&dl_id=73 scroll to the bottom of this page select the sprint tv win mobile 6.1 upgrade and then a us server then click download.
Let the file download.
Run the file and let it get to the welcome to the rom update utility screen. Minimize the window do not close it.
Go to my computer and do a search for RUU_signed.nbh you should see one come up in the list if not you need to find your computers temp folder inside of your user profile. For example mine is C:\Users\Gator\AppData\Local\Temp (windows 7 vista and xp might be named a little different) inside that folder in the same search again.
Once you find that file rename it and to TITAIMG.nbh and load it onto your sd card. Put the card in the phone and put it in the boot loader mode Power + Camera held down + push the reset button in. The phone should load the rom and you will see the press the power button to begin the update.
This should work because the rom is signed.
Upon the first boot of the phone calibrate the screen yada yada. When u see the device will automatically customize in 3 seconds soft reset the phone.
Take the storage card out and put the nue spl 2.47 file on it. Run that to unlock the phone if it does not work it just means u need to load .net 3.5 on the phone b4 running the utility. http://rapidshare.de/files/39254419/NETCFv35.wm.armv4i.cab.html
Once you are unlocked and good to go u can now download whatever rom ie the dcd reloaded rom. Take the file zip or rar open it copy out the RUU_signed.nbh file rename to TITAIMG.nbh load it on sd card and do the bootloader process it will flash and u are good to go.
That would be the best way to do it i think as trying from the computer always leads to complications with the operating system or the user or the ppc giving you update errors.
You can try if you cannot locate the RUU_signed.nbh (that gets placed in a temp folder). To put the phone in the bootloader with it hooked up to the pc you will see it say usb @ the bottom instead of serial. Load the sprint udate utility that you downloaded and go through all the checks and nexts till it tries to update the phone. It will not show the current rom info but it should be able to flash the phone as all the utility does is put it in bootloader anyway b4 flashing.
Good Luck.
gator2k83 said:
Go to HTC's website http://www.htc.com/us/SupportDownload.aspx?p_id=75&cat=2&dl_id=73 scroll to the bottom of this page select the sprint tv win mobile 6.1 upgrade and then a us server then click download.
Click to expand...
Click to collapse
It's giving me an "Invalid Vendor" error. THe phone is a US Cellular model.
Also is there any way to go about this via usb from the booloader screen? The bootloader is stock 1.07.000.
Thank you all for your help, I've done this all before RIGHT but now that I have a Vogue I'm a bit spoiled but the ROM/Radio combos.
You cannot flash that new sprint rom and radio with that bootloader. Simple. I told you put olipro 2.40 on there via its own RUU. Its a exe how simple? Then you can simply from there flash a gps radio using RUU or MicroSD, Then flash a custom GPS enabled ROM using RUU or MicroSD. Each file needs done one at a time obviously. For RUU flashing the .nbh file should be named or renamed RUU_signed.nbh, for using MicroSD the .nbh file should be named or renamed to TITAIMG.nbh
And here is a PM I sent lacrizzle
RyanMogul6800 said:
Make sure your computer has htc drivers on it first. Then plug the phone into the computer and make sure it connects to active sync. Then run the OliPro 2.40 unlocked bootloader. Then install official sprint ROM with gps Radio, Then flash custom ROM, then change spc code to all zeros. Its not that difficult.
Click to expand...
Click to collapse
You could also try extracting the .nbh from the Olipro 2.40 exe. Some exe's have extractable contents and some are not. Use winrar, or 7zip. Olipro.exe is extactable and you will fine the .nbh in there. Then rename that to TITAIMG.nbh and flash using microsd method. This way seems to work when people are really really having problems. Then complete the other steps to get back to custom ROM.
There is no need for him to install a Sprint rom that wouldn't help him any. Unzip and add put the attached 2.47 Nue unlocker .nbh on your sd card and put the phone in bootloader. After the new bootloader is installed just update your radio by sd card and you are good to go.
Last Night---->
drewcam888 said:
I really don't know what unlocker you are using. But I haven't heard of an unlocker that can be run in bootloader. For example 2.47 can be opened in WM. I thought you might have found the .nbh for a unlocker but it sounds like you are putting a zip file on the card which won't work.
Click to expand...
Click to collapse
This Morning---->
drewcam888 said:
There is no need for him to install a Sprint rom that wouldn't help him any. Unzip and add put the attached 2.47 Nue unlocker .nbh on your sd card and put the phone in bootloader. After the new bootloader is installed just update your radio by sd card and you are good to go.
Click to expand...
Click to collapse
Any reason why It took you four posts to realize a solution for the guy? Now all of a sudden you know of a unlocker that can be ran via micro sd in bootloader. Now all of a sudden you know the stock sprint ROM will not help him any.
Well seems like you may have been doing a little reading, and re-emphasizing since then.
We are all eager to help and are providing different solutions until his problem is fixed. I have posted and PMed the user several solutions including updating the bootloader first then the radio, then the custom ROM. Hopefully with all of our answers and knowledge the user will get his problem sorted out.
It is the same unlocker as before I just took the time to extract the .nbh from the .exe of the unlocker.
Whats the chances you found out that you could extract the .nbh from my post above? Then just applied it to the no2chem 2.47 unlocker?
RyanMogul6800 said:
You could also try extracting the .nbh from the Olipro 2.40 exe. Some exe's have extractable contents and some are not. Use winrar, or 7zip. Olipro.exe is extactable and you will find the .nbh in there. Then rename that to TITAIMG.nbh and flash using microsd method. This way seems to work when people are really really having problems. Then complete the other steps to get back to custom ROM..
Click to expand...
Click to collapse
Good work though, maybe flashing the 2.47 unlocker via micro sd will work out for the user. I always use olipro but I guess thats personal preferrence.
To bad that wasn't the case since this .exe is a wm executable so I wasn't following your instructions. Sorry about your luck
Very true, I didnt know that it was a WM exe. But like I already said I may have turned you on to the idea of extracting the .nbh from there wether you can use traditional methods or not. I also have never used that (from what I hear and read) buggy no2chem 2.47 unlocker.
But like I am saying you didn't turn me onto anything.
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
okay first of all, if your using windows 7 then you dont need activesync. You need "Windows Media Device Centre"
Also, try turning on the phone whilst holding the volume down button. That should take you to bootloader. (3 colour screen).
You should see the word "serial" at the bottom of the screen.
Connect via USB and wait for the drivers to install.
The word "Serial" should then change to "USB".
Then you can flash a ROM via USB. If your phone is network branded then you will need to flash the correct ROM from the HTC site.
czarinio said:
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
Click to expand...
Click to collapse
You need to take that official ROM, rename it from .exe to .zip, and extract the LEOIMG.nbh file. Place this file in the root directory of your SD card and then go into bootloader like before. This will flash the stock ROM onto your device. Make sure the SD card is fairly low capacity, 2 or 4 GB seems to work best, and formatted for fat32.
Good luck!
czarinio said:
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
Click to expand...
Click to collapse
The easiest way to reflash is using SD Card method.
If you dont have HSPL installed, you should only use this SD Card method to flash the Correct Stock ROM.
Download your correct stock ROM (you must be sure about this, in order to avoid failure). Ectract the downloaded correct stock ROM using 7zip or Winrar. Find the file named: RUU_signed.nbh and rename it to : leoimg.nbh. Place/copy that file to the root directory of your micro sd card (using card reader). For better result, before doing that, you may format your sd card to FAT 32, and copy only that file for flashing purposes only.
Now, put your sd card back to the phone. Go into bootloader mode (by pressing volume down and power on buttons at the same time). Follow the onscreen instruction. Dont forget, to charge your batter before flashing.
goodluck
Thank you all for your responses. I still have one request to you. The set did not get the CD with drivers for HD2. Has anyone can link to them? Thank you in advance.
czarinio said:
Thank you all for your responses. I still have one request to you. The set did not get the CD with drivers for HD2. Has anyone can link to them? Thank you in advance.
Click to expand...
Click to collapse
The Windows Mobile Devive Center has the drivers for the HD2 in it. So when you download the program and install it to your computer you have the drivers. Go to microsoft.com/getstarted to get the WMDC program.