Got a good deal on a used Eris, the ebay description said that it was stuck on the boot screen, and that the verizon rep told him that it was because he didn't upgrade to the new os, so he bought a new phone. I get the phone, flash the new update to it and all goes well.
Well, turns out that it's not the os that was the problem, the digitizer screen isn't responding, at all. The phone boots up and everything looks like it's working. It gets to the lock screen, and this is where I'm stuck. Since the screen doesn't respond to any touches, I can't unlock it and try anything out. Is there a way to get it to boot to a screen other than the lock screen? I just want to test it out to make sure it's the digitizer and not something else.
So I'm wondering, do the digitizers fail like this often, just stop working? I opened it up and checked all of the connectors, nothing loose. I got such a good deal that getting a new digitizer for it is still an option, I just want to make sure that that's what the problem is.
Any help is greatly appreciated,
Dale.
Ask for a refund, you encountered a problem he didn't list
Sent From Eris with XtrSense
destes said:
Got a good deal on a used Eris, the ebay description said that it was stuck on the boot screen, and that the verizon rep told him that it was because he didn't upgrade to the new os, so he bought a new phone. I get the phone, flash the new update to it and all goes well.
Well, turns out that it's not the os that was the problem, the digitizer screen isn't responding, at all. The phone boots up and everything looks like it's working. It gets to the lock screen, and this is where I'm stuck. Since the screen doesn't respond to any touches, I can't unlock it and try anything out. Is there a way to get it to boot to a screen other than the lock screen? I just want to test it out to make sure it's the digitizer and not something else.
So I'm wondering, do the digitizers fail like this often, just stop working? I opened it up and checked all of the connectors, nothing loose. I got such a good deal that getting a new digitizer for it is still an option, I just want to make sure that that's what the problem is.
Any help is greatly appreciated,
Dale.
Click to expand...
Click to collapse
Some roms allow you to unlock using the menu key, once in you could use the trackball, use a sense rom those i think allow unlock with the menu key. Good luck!
Related
Qeustion
My HD screen is off, and i cant seem to get it on again.
I just was working on it 1hour ago, took it out of my pocket and see that i have no screen.
Rebooted the phone, but no succes .. i see the screen turning on, but it light-gray (backlight) but no actual info/colors etc, also tryd a soft reset, no succes.
I have the Energy ROM Com5 build from 8July with the new 2.12 radio rom.
Could it be that in some way the screen died?
Hope someone can help me, im @ work now so i cant connect it with the PC.
When im home im planning to reflash the device ..
Thanks!
Weird
I just pressed a button and the screen turned on, and the colours/info just slowely fade away ... weird.
Could it be that the touchscreen is not oke anymore?
Or could it be a problem in the radio/rom i use? (and therefore a reflash could fix this?)
Hope its a easy sollution, otherwise ill be flashing it to stock and get it fixed by HTC.
Very very strange.
It seems to work again.
Anyone think i should reflash it to stock and try get a new one?
Are these signs of a screen going defect?
I dont know, first phone for me with touchscreen.
I would suspect a faulty screen, if it is still within warranty i would deffinately get a new one, however yes, try going back to stock first, see if it helps, it may be just a bad flash.
screen problem
I've had this and similar problems with my HD2, now on the 5th replacement from HTC in just 6 months of owning the phone. I also had the same problem on my HTC HD previously. Press the power key and just the buttons at the bottom light up but no response from the screen. Also had exactly the same problem your experiencing where you can faintly see the screen but not lit up. Flash it to stock rom and return to HTC for repair.
BEWARE!!! take some pics with date stamps of your handset before returning. They sent me 3 handsets all with the glass front panel not fitted correctly. Check the return handset carefully, you should be able to feel a lip between the casing and the screen as the screen is set a fraction lower than the casing. THis should be uniform all around. They tried telling me that i had damaged it myself despite calling them as soon as the handset had been delivered back to me.
micky9869 said:
Press the power key and just the buttons at the bottom light up but no response from the screen.
Click to expand...
Click to collapse
That's 'sleep of death', which affects loads of htc devices.
Oke i will stock it soon and return for repair.
I think its idd a screen problem, cause when the screen isnt functioning anymore, and when i put my ear on the glass, i hear a little squishing sound, like air is escaping .. it doesnt do that when the screen shows info/colour.
I know there are hundreds of threads and articles posted about HD2s freezing with the lock screen but this issue seems different to me. My problem is that whenever I lock the phone the touch screen will freeze entirely. I thought a work around may be to install a different lock screen. After installing that I can get past the lock screen but the touch screen still is not responsive. I have no idea what to do. I already did a hard reset and it still does it. I would like to add that it is completely consistent. It happens every time without fail. In order to even use the phone I have to pull the battery and I get one use out of it before it locks and I have to pull the battery again. Does anyone have any suggestions? I would really appreciate it..
Update: I flashed the original ROM to my phone and the freezing problem still exists.. I have no idea what to do at this point.
Update 2: Narrowed down the problem to being the physical "power/end/lock" button. If I slightly press it but not fully it will go to the honeycomb style menu with all the apps. If I press it fully the screen will go out like normal but then if I restore it, the entire screen is locked up. Nothing will work after that until I pull the battery.
I've directly linked the issue with the power button. I dont know why all of a sudden the power button would have a different function. The work around I found is while the phone is locked and the screen is off I can press the green button to unlock the phone and the touch screen will then function. If I use the power button it will remain frozen. Any ideas what happened?
Hello,
I got some bad news for you, this issue is actually related to the digitizer (hardware) not software. What i would recommend is called HTC for a repair and send it in, it is covered by warranty, hopefully you have warranty.
A lot of people are having this issue, no-one yet has been able to pinpoint the cause, but here is the link a thread with similar problem:
http://forum.xda-developers.com/showthread.php?t=854165
Luckych
Thanks for the reply. I do not think I have a warranty on this phone considering I bought it privately. Ill talk to Tmo and HTC and see what I can do. Just a theory, I may be wrong. But I live in PA and its been getting below 20 here lately. I noticed today that my work around didnt work when I was outside working on my car. Then I went inside and used a blow dryer to heat up the phone and it started working again. The end button didn't function properly but I could unlock the phone with the green send button. Perhaps the cold weather is shorting out people's digitizers? I don't really know how they work so that's why i said its only a theory. I bought this phone in the spring and didnt have an issue until now when it started getting really cold.
Well I did it... Broke the screen a couple of weekends ago. Ordered and received a new one. (No problem and not too bad price-wise) Then I ordered the correct screwdriver. That came in yesterday and I followed a couple of tutorials online to take the thing apart. Not too bad despite the teeny-tiny parts. I got it back together and lo-it worked! Actually it took a couple of tries and I reflashed it but then it booted right up. All the apps seemed responsive and life was good once again...
Until I tried to make a call. Then the screen went dark and it appeared that the phone froze up. Called myself from the house phone and discovered that the Aria was dialing, connecting, and sending voice but that I couldn't hear anything on the Aria.
Disassembled, re-set the earpiece, reassembled, called myself again, and I could hear. The screen came on and stayed on, but the touchscreen would not function.
Disassembled, checked all the connections, and reassembled again. The phone appears to work correctly in all aspects until I try to make or receive calls. At that point the screen shuts down and the only way to disconnect a call (or get the screen back) is to pull the battery and reboot.
I tried reflashing the ROM and that didn't work. I'm afraid the transceiver is shorting the screen out somehow but have reached the limits of my expertise.
Any suggestions?
Thanks,
Jerry
I have never had to replace my digitizer so only speaking from what i have read but it sounds like the very small rubber piece that covers the proximity sensor. I have read that if missing or not placed correctly people have had the same problem as you. Just my thoughts
I've replaced my digitizer and I have had the exact same problem. E.Cardo is correct, it is the small rubber piece on the proximity sensor not positioned correctly or not present at all.
Thanks to both of you. The proximity sensor is supposed to be right behind the ATT logo, correct?
I can't wait to get home and try this. I really don't like the backup Cliq Xt... I'll post once I've messed with it.
gdgeorge said:
The proximity sensor is supposed to be right behind the ATT logo, correct?
Click to expand...
Click to collapse
It's hard to see them exactly so I took a picture to show exactly where they are:
http://imgur.com/a/36h8t#ayQhv
It's actually just above the & in the at&t logo, although if you have a replacement digitizer, it might not have the at&t logo on it. If you have trouble seeing it, try looking at it in the sunlight.
To add to what drumist said there as small black rubber piece that goes around the proximity sensor that prevents light seepage and allot of people discard it by mistake when disassembling the phone.
Sent From Deep Within The Rabbit-Hole
Why did you have to reflash? The new screen didn't worked?.
My aria's screen is broken too. I boutgh a new one but It doesn't work. Do you resolve this reflashing? (that's mean applying the new rom version from ATT)
Thanks for your response.
javierarenas said:
Why did you have to reflash? The new screen didn't worked?.
My aria's screen is broken too. I boutgh a new one but It doesn't work. Do you resolve this reflashing? (that's mean applying the new rom version from ATT)
Thanks for your response.
Click to expand...
Click to collapse
The screen or digitizer are hardware they should have nothing to do with the rom. The op only tried flashing the phone to illuminate it is a possible source of the problem. It sounds like you did not install the new screen or digitizer correctly you may need to disassemble and make sure everything is connected correctly and securely. Flashing your phone will most likely not correct your problem.
Sent From Deep Within The Rabbit-Hole
Maybe, just maybe, there are new drivers for the touchscreen included in the rom. I am using cyanogen 7.0.3 without problems, and it works nice with the old screen.
Or the new screen is defective.
I am pretty sure I installed correctly the new screen. Of course the old one is working fine right now.
I requested a new screen so I will wait...
Thanks again.
I have a new HTC flyer, the screen is unresponsive out of the box.
every thing else seems to be working fine, it can even connect to 3g, switch to landscape while locked.
I can't go past the unlock screen, so it's as good as bricked.
I didn't do any rooting or ROM downloading on it.
please help.
engineer05 said:
I have a new HTC flyer, the screen is unresponsive out of the box.
every thing else seems to be working fine, it can even connect to 3g, switch to landscape while locked.
I can't go past the unlock screen, so it's as good as bricked.
I didn't do any rooting or ROM downloading on it.
please help.
Click to expand...
Click to collapse
Take it back where you bought it, and get another one, replaced by your vendor,of course.
this is the problem .. .. I can't return it
I got it from overseas with one of my friends and he didn't keep the casing ...
any ideas ... what possibly could be the cause of this ? software, screen, digitizer ,... ?!!!
Turn it off. Then hold down the power button and volume down at same time. Then do Factory Reset.
I'm brand new to HTC devices so I'm unsure if the dialer is sense or if this is a ICS dialer were dealing with. (My old phone was a Droidx, so my exp is with blur and asop 2.3 from liberty).
Either way though i seem to have come across an interesting "bug" or at least unusual behavior.
I've noticed on almost every other call, weather it's incoming or outgoing, the MOMENT you dial/answer the screen goes dark. Now i can press the power button to wake it up again and it will stay on for exactly 5 seconds before going dark again. If i flip on speaker phone the screen will stay on, however the moment i turn off speaker phone it goes dark again.
Whats really annoying is if i go back to the home screen it still goes dark after 5 seconds but now when i wake it up it's at the lock screen. If i try to unlock it the moment i touch the screen it goes dark. No matter where i touch the screen the phone is now perma locked until the call is finished.
Now like i said this happens every other call so far in the 6 times I've tested this, which i thought was really odd. The other times the screen stays on and acts completely normal no matter what i do while a call is active. Fresh reboot makes no difference. I haven't done a factory reset yet as I'm trying avoid that.
What i have done so far is unlocked the bootloader, Flashed recovery, and the root from con247's thread in the dev section. I don't think that has anything to do with it though since i noticed the screen going black during a call before i started messing with bootloaders/recovery/root. I just didn't test it as well before doing those things cuz i didn't think anything of it.
Is anyone else seeing this behavior and does anyone have any suggestions?
Void4ever
void4ever said:
I'm brand new to HTC devices so I'm unsure if the dialer is sense or if this is a ICS dialer were dealing with. (My old phone was a Droidx, so my exp is with blur and asop 2.3 from liberty).
Either way though i seem to have come across an interesting "bug" or at least unusual behavior.
I've noticed on almost every other call, weather it's incoming or outgoing, the MOMENT you dial/answer the screen goes dark. Now i can press the power button to wake it up again and it will stay on for exactly 5 seconds before going dark again. If i flip on speaker phone the screen will stay on, however the moment i turn off speaker phone it goes dark again.
Whats really annoying is if i go back to the home screen it still goes dark after 5 seconds but now when i wake it up it's at the lock screen. If i try to unlock it the moment i touch the screen it goes dark. No matter where i touch the screen the phone is now perma locked until the call is finished.
Now like i said this happens every other call so far in the 6 times I've tested this, which i thought was really odd. The other times the screen stays on and acts completely normal no matter what i do while a call is active. Fresh reboot makes no difference. I haven't done a factory reset yet as I'm trying avoid that.
What i have done so far is unlocked the bootloader, Flashed recovery, and the root from con247's thread in the dev section. I don't think that has anything to do with it though since i noticed the screen going black during a call before i started messing with bootloaders/recovery/root. I just didn't test it as well before doing those things cuz i didn't think anything of it.
Is anyone else seeing this behavior and does anyone have any suggestions?
Void4ever
Click to expand...
Click to collapse
Sounds like the proximity sensor is going wonky. You might try a factory reset and without installing anything else see if you get the same issue. Also, make sure that any programs you have installed are not affecting it for some reason.
blazingwolf said:
Sounds like the proximity sensor is going wonky. You might try a factory reset and without installing anything else see if you get the same issue. Also, make sure that any programs you have installed are not affecting it for some reason.
Click to expand...
Click to collapse
Just factory reset it, skipped setup completely and started making calls, same issue. You maybe right about the sensor though. The first call acted up like i explained. The second call the screen was staying on like i expected, but once i switched speaker phone off and then back on the screen shut off and started acting like call one again.
I just got this phone 6 hours ago i wonder how hard it will be to convince verizon there's a hardware fault. I guess i'd better unroot it and remove recovery so i can call in the morning.
Void4ever
I just wanted to make sure i understand this before i do it.
To remove the root i need to install the RUU for the phone, which i found at http://themikmik.com/showthread.php?13550-Asian-Shooter-goes-ICS-and-a-VZW-Fireball-RUU (second link i assume).
I haven't downloaded it yet, but it's an exe. Will it flash the phone via USB, or does it just extract something i can use recovery to flash with?
Once i get the root removed i just need to flash back the original recovery and i should be good to go right?
Void4ever
void4ever said:
I just wanted to make sure i understand this before i do it.
To remove the root i need to install the RUU for the phone, which i found at http://themikmik.com/showthread.php?13550-Asian-Shooter-goes-ICS-and-a-VZW-Fireball-RUU (second link i assume).
I haven't downloaded it yet, but it's an exe. Will it flash the phone via USB, or does it just extract something i can use recovery to flash with?
Once i get the root removed i just need to flash back the original recovery and i should be good to go right?
Void4ever
Click to expand...
Click to collapse
There are directions in the RUU that will explain all of the steps. You will connect your phone with the USB cable.
It shouldn't be to hard to convince them. Just show them the steps you did to reproduce the issue. Good luck.
On the phone right now and the guy is setting up overnight sat delivery to my house. We are a fairly large business account so i'm glad they are going that extra mile.
Just to note I've noticed the sensor doesn't shut off after a call is complete. In fact it stayed on last night for around 6 hours before finally turning off. I did another test this morning and once again the sensor is stuck on, so good call. Thanks so much for your help, i never would have thought sensor, it seemed like a software issue to me!
Void4ever
void4ever said:
On the phone right now and the guy is setting up overnight sat delivery to my house. We are a fairly large business account so i'm glad they are going that extra mile.
Just to note I've noticed the sensor doesn't shut off after a call is complete. In fact it stayed on last night for around 6 hours before finally turning off. I did another test this morning and once again the sensor is stuck on, so good call. Thanks so much for your help, i never would have thought sensor, it seemed like a software issue to me!
Void4ever
Click to expand...
Click to collapse
No problem. Glad you got a new one coming.
replacement came today and it works like a dream now, got custom recovery and root going! It was def a bad prox sensor on the other one. Thanks again for your help wolf!
Void4ever
Good to hear man. Enjoy that puppy.
void4ever said:
replacement came today and it works like a dream now, got custom recovery and root going! It was def a bad prox sensor on the other one. Thanks again for your help wolf!
Void4ever
Click to expand...
Click to collapse
Awesome.
Sent from my ADR6410LVW using Tapatalk 2