Related
im not a newby to flashing ive been through my tytn flashing left and right. i just got my fuze about a month ago and ive been reading evaluating all these roms to see which one would be best for me with the least amount of bugs.
i had no issue unlockin my fuze and by doing that i know i can go straight to flashing. but when i go to flash my fuze it gives me a Error Code 244 Device ID....i have no clue and am completely lost. any help?
I'm not familiar with that error code but do you have Olinex's HardSPL? If not download it and flash it to your Fuze, and then you may flash cooked ROMs.
PRETTY POSITIVE I DO BECAUSE I SIM/SECURITY UNLOCKED MY PHONE ETC...
will it hurt to flash hardspl again even if i already have it on here?
Nope, just do the HardSPL again...
read this: http://wiki.xda-developers.com/index.php?pagename=Elf_RUU_Error_Codes
Even though its for the elf the error codes will be the same
also when u enter boot loader, does the top white bar say "security unlocked?"
be very sure you hardspl properly by holding down bottom volume button and soft reset button at the same time. Top left should be 1.90 olinex. if not, you are not hardspl properly.
im going to just reflash hard spl. i know its flashed bcuz i unlocked the phone and thats part of the process. see what happens then. thanks for all the info
no luck. getting the same error 244 invalid device id
cediesaid said:
PRETTY POSITIVE I DO BECAUSE I SIM/SECURITY UNLOCKED MY PHONE ETC...
will it hurt to flash hardspl again even if i already have it on here?
Click to expand...
Click to collapse
That sounds really, really ominous. This is what error 244 says (thanks for the link, Warjcowski, it's an interesting read):
ERROR 244 (Invalid Model ID):
First reason: Your device is not CID unlocked, and the Model ID of your device does not match the Model ID of the ROM. CID unlock your device by flashing a Hard SPL and then try again, or flash a shipped ROM with the correct Model ID.
Second reason: You have the Hard SPL and are trying to flash a shipped ROM (which is attempting to overwrite the SPL). Flash a ROM that does not contain an SPL, or remove the SPL from this shipped ROM (i.e. use NBHextract.exe to grab all the components then rebuild just the OS.nb with HTC ROM Tool).
Third reason: You have the Hard SPL and are trying to flash an older (usually cooked) ROM. Downgrade to a USPL (different from Hard SPL!) using the 'white screen' method and then flash the ROM again.
Click to expand...
Click to collapse
That doesn't sound good. It makes me think you don't have hard spl. So I did a little poking around, and found this post from a thread that you started (emphasis mine):
cediesaid said:
i just got mine from sprint. im not a fan of the speaker volume. just doesn't ring as loud. i know with my tilt i found a way per this website to make it higher. not sure how to do it on my touch pro. can someone help?
Click to expand...
Click to collapse
In the first post, you said you had a fuze. You don't have a fuze, you've got a Sprint Touch Pro (unless you got rid of it and got a fuze-excuse me if you did). What ROM did you flash to your Touch Pro (probably Energy ROM, wasn't it?)? I'm afraid that you killed your phone.
excellent detective work Farmer Ted. I was going to go check to see all his posts as well to see what device he really had but you were ahead of me lol
i dont think ive killed my phone. im using it noe to reply. lol. i have not flashed any roms and im attempting. but i own fuze now
when you go into bootloader does it say? 1.90oilnex? i know someone said it before but i just want to make sure you have Hard Spl on there properly.
yes it did before i reflashed hardspl again. and it says it now too.....im sooo lost on what to do
cediesaid said:
im not a newby to flashing ive been through my tytn flashing left and right. i just got my fuze about a month ago and ive been reading evaluating all these roms to see which one would be best for me with the least amount of bugs.
i had no issue unlockin my fuze and by doing that i know i can go straight to flashing. but when i go to flash my fuze it gives me a Error Code 244 Device ID....i have no clue and am completely lost. any help?
Click to expand...
Click to collapse
What ROM (OS or radio; custom or stock) and what version are you trying to flash to?
cediesaid said:
i dont think ive killed my phone. im using it noe to reply. lol. i have not flashed any roms and im attempting. but i own fuze now
Click to expand...
Click to collapse
cediesaid said:
yes it did before i reflashed hardspl again. and it says it now too.....im sooo lost on what to do
Click to expand...
Click to collapse
Ok, now I'm really confused. In the first post, you say the phone is fine and you're using it to write the post. Maybe you're joking there-honestly, I don't know. But if it's fine, then why are you lost on what to do? Is the phone bricked, or is it fine? You can get into bootloader (I assume so, since you know that hard spl was flashed)? Then just flash your previous ROM back onto the phone off of an sd card.
im confused because i keep gwtting the same error message when i go to flash the rom
cediesaid said:
im confused because i keep gwtting the same error message when i go to flash the rom
Click to expand...
Click to collapse
Let's head back to the basics again.
What exactly and completely does it say when you go to the bootloader screen?
What is the model number of the device you are trying to flash?
What carrier do you have?
What ROM are you trying to flash?
What method are you using to flash this ROM?
My bootloader shows the following
Security Unlocked
RAPH110
SPL-1.90.Olinex
MicroP-Raph (LED) v13
MicroP-Raph (KEY) v5
PSOC-Raph STAGE_CVT v0x36
I bought my fuze form a corpoate att store.
I have tmobile and have been using my fuze on the tmobile network for about a month now.
I have tried flashing via usb with actie sync. and when it goes to flash it brings up the percentage bar saying it could take ten minutes and just go straight to 100 percent in like 2 seconds then gives me the error invalid device id.
the rom i was attempting was natv v4 for the fuze. then i tried the elite rom as well. no luck same result
received response
Just flash from your SD card assuming you have one.
he guys, i posted this thread a while ago
http://forum.xda-developers.com/showthread.php?p=7913347#post7913347
and i tried the 2nd advice.... i did the task 29 and all was removed....
i had the HSPL 1.42. and according to the steps posted there, i install the 2.08 HSPL version on my mobile...i tried to install the
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
and it is not working.....so i put it back to HSPL 1.42......... now its not installing the ROM....
wat am i supposed to do? help guys......
djameel said:
he guys, i posted this thread a while ago
http://forum.xda-developers.com/showthread.php?p=7913347#post7913347
and i tried the 2nd advice.... i did the task 29 and all was removed....
i had the HSPL 1.42. and according to the steps posted there, i install the 2.08 HSPL version on my mobile...i tried to install the
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
and it is not working.....so i put it back to HSPL 1.42......... now its not installing the ROM....
wat am i supposed to do? help guys......
Click to expand...
Click to collapse
Flash to HSPL, and flash a Custom ROM and see if it works.
here on my screen its like this
PB81100 HX-BC
SPL_1.42.HSPL XE
0x05
costullaHSPL 0x40
Upgrade ROM code error
Please try again
wat am i supposed to do?
hmmm gaarry how do we flash to HSPL?
you already have hspl, try flashing a different rom, or download the one you want again.
ok well i gave it a try still not working stuck on 9 % and saying upgrade ROM code error
will this ROM be compatible
Energy.Leo.21914.Sense2.5.Cookie.DinikGlass.Aug.28.7z
here's the link http://forum.xda-developers.com/showthread.php?t=654504
i think you ned to go back to stock and start again.
Go to the t mobile website and get the 2.13 rom and flash that.
can u please give me a link for the 2.13 ROM ?????
please
ill be grateful...
Guys when using the task29 program , it installed the 2.00....version on my mobile....i dont know wat it means
all i know that now i dont have any rom on my mobile...right...
so now can i install any version of ROM on my mobile?????
@samsamuel: thk u for your advices... can u please tell me where can i get the 2.13 ROM coz when i bought the mobile there wasnt any brand name on it, i.e. no T-mobile......on it
i went to the Tmobile site and didnot find anything....
can this be installed on my mobile
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
Sry guys for my ignorance and lack of knowledge on windows mobile....just that u guys are awesome always coming up with new Roms which are interesting to use.....i just wanted to try one and now im in a mess
ahh sorry, i thought you had a t mobile, but you dont, thats my mistake.
Go HERE, first post, first link. pick a folder for version you want, for example the 1.66 folder for a 1.66 version rom. Grab one that says HTC WWE
That would be the stock HTC unbranded rom.
Try flashing that, see what happens.
thank u , ill try it and see what happens?
i have both.....already downloaded them a while ago....non is working....stuck on 0 %......
go into bootloader (power off, hold and keep holding volume down, tap and release power)
What does it say next to 'spl'? (check now, please, dont just tell me what you think it says )
im writing everything that is written ok
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x40
Sorry for late reply wasnt at home....
hmm so its deffinately got hspl installed.
and you say you have tried the wwe HTC 1.66 rom?
try it again, to be sure.
Grab THIS one (1.66 HTC WWE) and flash it using usb.
Meanwhile, do you know what your original rom was? Was your phone provider locked? (Meaning do you need an o2 rom, or a t mobile rom, or whatever)
mine was in russian....i bought in ukraine while i was studying there..... thats why i said allmy money went in the phone...lol
so i was using it in russian.. then i installed the 1.48...WWE from tom codon....was working out fine except that the programs i wanted to install werent working..not even skype( old version i read some post that skype works on hd2)..
so i looked for another ROM got the 1.43 WWE.. didnt workfine gets restarted again and again....then has been like that...the heating up of the mobile + its restarting....
ill try your link ,,, the 1.66......btw thks
ahhh ok. Now im not sure about this, but i have heard in the past that russian devices can have issues when flashing different roms, but i dont understand why this would be,
give this one a try
RUU_Leo_HTC_RUS_1.48.411.1_Radio_Signed_15.28.50.0 7U_2.05.51.05_2_Ship.exe
its in leo official roms, first post first thread 1.48 folder.
the russian ROM link is a dead one....
im getting that one from htcpedia http://htcpedia.com/official_wm_rom_htc_hd_leo_russian_version/soft/htc-leo-rom.html
got the 1.48 version from this one http://www.4shared.com/dir/25026486/e973b316/Leo_148.html
ill try and tell u...1st ill try the 1.66 roms...
@samsamuel, thks for your message...
Does this means that for the 1.66 ROM im installing, i will be needing the 1.66HSPL....
any way the 1.66 rom got stuck on 8%....what does that mean coz the other roms also did the same? ( coz before when i first installed the WWE 1.48 version, there was no problem)
ill try the russian ROM and tell you..
any version hspl will work, (or at least it will in normal circumstances)
yours seems to be a complicated problem, not the usual flashing problems, and all i can suggest is that if the russian rom doesn't work over usb, you can try it from sd card, which "should" completely reset the rom, radio and spl back to stock.
heading to bed, good luck!
Well none worked.....at first the 1.66 ROM was up to 100% and it finished installing...but when it rebooted, the phone remained on the white screen.... the russian stuck on 8%...
i was doing through the sd card but the phone got turn off and now the phone is not even charging itself ...its not turning back on.............
can anything happen to the hardware?
here is the thing from the start.
a friend of mine bought a HD2 from hong-kong.
after installing a cab file for hebrew support the device wont go up.
hard reset to the device didnt help.
so i thought i should hspl the device and then flash the new nrg rom.
after i did hspl from version 1.66 i made a ROM FLASH BEFORE RADIO FLASH.
anyways the NRG system refused to go up then i made radio upadte and tried flash again to NRG rom but the flash keep stucking in the middle every time.
i got stucked with the error cable code in bootloader menu.
flashed from sd the newest ROM 3.14.405.2 still nothing changed still with error and now without the HSPL.
is there anything else i missed?
JUST TRIED TASK29..afte 4% stopped with messege not allowed
Welcome to the dark side,I did the same thing,I followed someones advice and flashed the official 3.14 from the SD card,now I am stuck at the bootloader with SPL 3.03.
Lots of peaople here have become bummers asking for a new HSPL but the smart guys seem to be turning a deaf ear.
try to flash earlier official rom e.g 1.66 rom not from sd card but with the pc
hagba said:
Welcome to the dark side,I did the same thing,I followed someones advice and flashed the official 3.14 from the SD card,now I am stuck at the bootloader with SPL 3.03.
Lots of peaople here have become bummers asking for a new HSPL but the smart guys seem to be turning a deaf ear.
Click to expand...
Click to collapse
Holy h*t...
Are you freaking crazy?
You MUST NOT flash a original ROM from SD card... That will overwrite the hardspl...
If you guys follow the RTFM tradition before do something you don't understand, then that would not happen...
Now you have to wait until a new hardspl is released...
Maybe you should do a task 28/29 and flash 3.14 with RUU.
Before you guys do another stupid thing... Don't try a "task 2a".
Maybe it don't brick your device, but it also will not help.
coneman23 said:
here is the thing from the start.
a friend of mine bought a HD2 from hong-kong.
after installing a cab file for hebrew support the device wont go up.
hard reset to the device didnt help.
so i thought i should hspl the device and then flash the new nrg rom.
after i did hspl from version 1.66 i made a ROM FLASH BEFORE RADIO FLASH.
anyways the NRG system refused to go up then i made radio upadte and tried flash again to NRG rom but the flash keep stucking in the middle every time.
i got stucked with the error cable code in bootloader menu.
flashed from sd the newest ROM 3.14.405.2 still nothing changed still with error and now without the HSPL.
is there anything else i missed?
Click to expand...
Click to collapse
maybe try SSPL
Hi
ive had similar problem (stuck with hspl 3.03) and flashing official leoimg from sd card worked for me so it is worth trying.
Regards
artiik said:
Hi
ive had similar problem (stuck with hspl 3.03) and flashing official leoimg from sd card worked for me so it is worth trying.
Regards
Click to expand...
Click to collapse
Why you freaking guys flash an official ROM from SD-Card?
tired that all
i couldnt get offical flash..
keep getting not allowed messege on the screen.
the thing is that the 3.03 update wasnt successul either and stopped at 44%
coneman23 said:
i couldnt get offical flash..
keep getting not allowed messege on the screen.
the thing is that the 3.03 update wasnt successul either and stopped at 44%
Click to expand...
Click to collapse
Did you try to flash the HD2 with 3.14 ROM (with the RUU)?
Crusoe86 said:
Did you try to flash the HD2 with 3.14 ROM (with the RUU)?
Click to expand...
Click to collapse
yes i have from sd and from usb..getting 28002 not allowed.
tried mtty42.1 task 29 and task 28 55aa
still no hope.
What should task 55aa do? In my opinin it should flash everthing except the radio. Right?
What kind of HD2 sells HK? Is it an ordinary 512MB one?
Is this an original HTC? I know the chinese people does not like originals, they like to sell their own not working but nearly original looking phones...
Look at this Touch Diamond
What happens if you install the latest HSPL (2.08)?
Is it possible to flash a new SPL (does not matter if original or not)
What kind of Radio do you have actual on your Phone?
Many regards
Crusoe86 said:
What should task 55aa do? In my opinin it should flash everthing except the radio. Right?
What kind of HD2 sells HK? Is it an ordinary 512MB one?
Is this an original HTC? I know the chinese people does not like originals, they like to sell their own not working but nearly original looking phones...
Look at this Touch Diamond
What happens if you install the latest HSPL (2.08)?
Is it possible to flash a new SPL (does not matter if original or not)
What kind of Radio do you have actual on your Phone?
Many regards
Click to expand...
Click to collapse
it is the orginal,he bought the phone with the wwe_asia 1.66 rom with english and chinese.
as i said tried to flash to 1.66 and again with new 3.16. but still getting not allowed.
task 28 55aa should format the device but some say its working only in case of hspl.
and since my phonw now got the 3.03 spl i guess its not possible.
correct me if im wrong but my only optios seems to be jtag which cost here in some labs about 150$...
Oh my god... What shoudl I do with you?...
I don't want to brick my HD2 to try something for you...
But... Did you know something about a "Goldcard" method?
If not I will help you to create one. On other phones the Goldcard allows to flash ROMs from another Provider... For example you have a Vodafone ROM and want a Stock HTC ROM... Normally this should not work. With a Goldcard it does...
Maybe you have an old microSD Card which we can use?!
Maybe we can also try to flash it with SSPL. Did you try this, too?
I never used SSPL, maybe it did not work in Bootloder mode, but we will se this when we try it
That's really nice help, from you Crusoe86.
PINki92 said:
That's really nice help, from you Crusoe86.
Click to expand...
Click to collapse
I hope it will help the author...
I know how it feel when the own phone is broken.
My first HD2 was overrun by a car... And it takes me 5 month to repair it, because I can't get a keypad ribbon...
And my second HD2 is not really broken... My girlfriend loaned it two weeks ago for one week. She still has is, because she like the Android OS on it and until now she won't give it back to me. Now I have to wait until my Desire HD arrives me
What should I say... Women...
But... PPP works very well for her operator (BASE) on Android, I've interruptions every 5 minutes and I can be lucky if I can reconnect after each disconnect
Back to topic...
@coneman23:
I'll hope you've flashed a 2.**.50 radio (for e.g. 2.12.50) not a 2.**.51.
I've noticed, that those radios do not work with some ROMs.
Crusoe86 redirected me here.
is there actually a way to fix this?
maybe with goldcard and official 1.48 rom?
Here I am...
You could try HSPL3 to revert back to an older SPL. Maybe that works...
And you can try older Stock ROMs like the 1.48 (from SD card (I use an old one when I flash my HD2, maybe thats is more compatible like newer SDHC cards)).
Andhopefully it replaces the new SPL.
But I would try the Goldcard method or try to boot SSPL from bootloader mode...
My girlfriend has my HD2 actually. I can't try anything
Crusoe86 said:
Here I am...
You could try HSPL3 to revert back to an older SPL. Maybe that works...
And you can try older Stock ROMs like the 1.48 (from SD card (I use an old one when I flash my HD2, maybe thats is more compatible like newer SDHC cards)).
Andhopefully it replaces the new SPL.
But I would try the Goldcard method or try to boot SSPL from bootloader mode...
My girlfriend has my HD2 actually. I can't try anything
Click to expand...
Click to collapse
I dont know how to make a goldcard, so i cant make one.
I recommend that you try this (found in your thread).
If that does not work, we can make a Goldcard.
It is not very difficult, but this solution in your thread seems to be easier if it works.
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
CotullaHSPL 0x05
0x50
Upgrade ROM code error
please try again.
This is currently what my bootloader loads up. This all happended when i tried to flash back to stock. Im pretty sure I messed up somewere.
Whenever I try to load a custom rom (I was using an energy rom prior), it will get up to 81% the highest ive gotten it, then gives me an error.
When I try to flash another stock rom I found here, the 2.10 ship rom, i cant get it passed 23%.
anyone know what I have to do to fix this brick?
bbsix6 said:
When I try to flash another stock rom I found here, the 2.10 ship rom, i cant get it passed 23%.
Click to expand...
Click to collapse
are you trying with 2.10.0 which comes as an .exe file, or 2.10.1 which doesn't? Because the 2.10.1 rom found in the tmous section stock roms thread is treated by the phone as a cooked rom, (requires hspl) and doesn't include the stock spl. Make sure to use the 2.10.0
Also, can you connect to the phone with hspl3? if so, can you reset the hspl to 2.08.0000? (thats good enough for warranty, and it may also fix the flashing problem.)
So as title says I want every god damn person who have, had this kind of buged phone, tell their expirence, for start I will tell mine.
When i got phone in about was writen x310e, then in SPL screen was written spl 2.5.16.xx in bottom F400, no connection to PC, my next step was to download every god damn europan eternity ROM and flash it via Gold card, when i was getting tierd of changing memory sticks i found one that did the trick with HD7, so i was happy but bump, no work on Titan, so I was searching for solutions and found Cingular eternity ROM with 1.x.xx, so i tried to flash it via gold card and it worked!!! BUT(one big but) it didnt changed Baseband version it stayed 2.5.16.xx i was kinda surprised i thought the flashing failed, but it didnt, the F400 was away and i have Cingular ROM, next step was trying to flash 4.06 bb 2.06... Nothing worked, so i thought i destroyed it since after cingular ROM nothing was flashable, the HSPL allways showed success but nothing changed in SPL screen, but my Titan isnt unflashable it can only be flashed vai goldcard with famous Cingular stock ROM, i managed to update Titan via cab and thats my max triumph.
My humble opinion is that the baseband chip got overloaded or mybe locked to this single stock ROM witch is Designed for this version of Titan.
I have and offer that for 20 euros a phone repair shop can do something with my phone and change the baseband same as make it posible to run customs ROM, they told me 99% it will work, tho he didnt wanted to tell me the method he will use, i supose the J-TAG box method.
You all are free to comment on my case and tell your I am willing to do something extra for at&t Titan users.
Thanks for reading
..... lucky
Ok, I'm in same situation. My titan is trapped in spl 2.5 and the only rom I can flashed is the Cingular eternity rom. You're lucky man if you can flash a custom rom if you're titan was trapped in spl 2.5. Need to know in more detail what do you do to got the freedom.
I'm not getting this, so you're saying you have an AT&T Titan with a model X310e? I though US Titan models are X310a.
It was saying x310e because i had europan ROM when i got it, how that guy managed to install european ROM on it have no clue, all i know is i couldnt install that ROM again after i flashed Cingular ROM, if i could i would investigate how he did it, but i think he flashed European eternity ROM with spl 2.05 without debranding phone first so he got stuck in 2.05 and F400 errror. That is my opinion
I'd say the same thing, the SPL block probably been overwritten by the X310e model. Happened to my DE Trophy, HSPL'd first then installed a stock NZ Rom, but bootloader has been overwritten by the NZ ROM, now the CID is broken but it still recognizes itself as DE Trophy.
So i found this ROM and flashed it IMG Eternity Cingular 2.01.502.04 Radio 16.23.03.17_16.27.00.23U OS 7.10.7740.16 TEST and it did flash, but Bootloader Version didnt changed
nikola92 said:
It was saying x310e because i had europan ROM when i got it, how that guy managed to install european ROM on it have no clue, all i know is i couldnt install that ROM again after i flashed Cingular ROM, if i could i would investigate how he did it, but i think he flashed European eternity ROM with spl 2.05 without debranding phone first so he got stuck in 2.05 and F400 errror. That is my opinion
Click to expand...
Click to collapse
The European ROM can be flashed; change the image name from ETERIMG to ETERDIAG; be patient; it will flash; my device says x310e but the SPL remains 2.5.160015.3 (137079). A couple of days ago I got that same F400 error and I reflashed and it went away. He isn't using a custom ROM, what he did was use the WP7 Cab Sender and updated the OS to the latest build which is 8773 (8779 for some AT&T language packs).
I just HSPL'd my device...all of you with x310e ROMs, I will post this in detail later today...I put on my gold card DFT's NBH file for the SPL2.05...it took forever for the "Enter USB Host Mode" to change to load, but it will; next restart the device in bootloader and run DFT's HSPL...I think you have to be really, really patient with the USB Host...I will post more over on DFT thread later.
nikola92 said:
So as title says I want every god damn person who have, had this kind of buged phone, tell their expirence, for start I will tell mine.
When i got phone in about was writen x310e, then in SPL screen was written spl 2.5.16.xx in bottom F400, no connection to PC, my next step was to download every god damn europan eternity ROM and flash it via Gold card, when i was getting tierd of changing memory sticks i found one that did the trick with HD7, so i was happy but bump, no work on Titan, so I was searching for solutions and found Cingular eternity ROM with 1.x.xx, so i tried to flash it via gold card and it worked!!! BUT(one big but) it didnt changed Baseband version it stayed 2.5.16.xx i was kinda surprised i thought the flashing failed, but it didnt, the F400 was away and i have Cingular ROM, next step was trying to flash 4.06 bb 2.06... Nothing worked, so i thought i destroyed it since after cingular ROM nothing was flashable, the HSPL allways showed success but nothing changed in SPL screen, but my Titan isnt unflashable it can only be flashed vai goldcard with famous Cingular stock ROM, i managed to update Titan via cab and thats my max triumph.
My humble opinion is that the baseband chip got overloaded or mybe locked to this single stock ROM witch is Designed for this version of Titan.
I have and offer that for 20 euros a phone repair shop can do something with my phone and change the baseband same as make it posible to run customs ROM, they told me 99% it will work, tho he didnt wanted to tell me the method he will use, i supose the J-TAG box method.
You all are free to comment on my case and tell your I am willing to do something extra for at&t Titan users.
Thanks for reading
Click to expand...
Click to collapse
can you help me,please.(i want to flash room 7.8 and fix error code.)
my mobile is htc titan.it has some infomation: PI39100 MFG
SPL-2.5.160015(137079)
eMMC SND 15188MB
TOUCH A1(F:81,Í:1,V11,B:F8)
RADIO-16.23.02.26_A
thanks!
thuan92xd said:
can you help me,please.(i want to flash room 7.8 and fix error code.)
my mobile is htc titan.it has some infomation: PI39100 MFG
SPL-2.5.160015(137079)
eMMC SND 15188MB
TOUCH A1(F:81,Í:1,V11,B:F8)
RADIO-16.23.02.26_A
thanks!
Click to expand...
Click to collapse
Just follow the steps I have posted or other instructions where the debrand instructions are; read that entire thread thoroughly; my device began with those specs but now I'm HSPL and using a 17 version Radio. Be patient; read it and the HSPL thread and Wiki.
Bootloader problem?
Your problem is exactly like I had when the HTC bootloader (no matter if SPL HSPL or RSPL is used) got "semi-bricked" , although the auto-turn offs I also experienced vanished in two or three weeks after installing OS (depends on amount of restarts)
This was on another Mango-Tango device (Trophy) but semi bricked for sure......And I guess your device was recovered and then sold after being dumped before as -"completely bricked"- by another owner.
berrywr said:
The European ROM can be flashed; change the image name from ETERIMG to ETERDIAG; be patient; it will flash; my device says x310e but the SPL remains 2.5.160015.3 (137079). A couple of days ago I got that same F400 error and I reflashed and it went away. He isn't using a custom ROM, what he did was use the WP7 Cab Sender and updated the OS to the latest build which is 8773 (8779 for some AT&T language packs).
I just HSPL'd my device...all of you with x310e ROMs, I will post this in detail later today...I put on my gold card DFT's NBH file for the SPL2.05...it took forever for the "Enter USB Host Mode" to change to load, but it will; next restart the device in bootloader and run DFT's HSPL...I think you have to be really, really patient with the USB Host...I will post more over on DFT thread later.
Click to expand...
Click to collapse
Hi,
my Titan is stuck at
PI39100 MFG
SPL-2.5.160015.3(137079)
with europian official 7.5 rom
I can't HSPL. I wonder if I may rename the ETERIMG to ETERDIAG for the SPL2.05 so I can reinstall it, just it case the device may unblock...