possible brick, fml. - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

PB81120 SS-B3
SPL-2.08.HSPL 8G XE
CotullaHSPL 0x05
0x50
Upgrade ROM code error
please try again.
This is currently what my bootloader loads up. This all happended when i tried to flash back to stock. Im pretty sure I messed up somewere.
Whenever I try to load a custom rom (I was using an energy rom prior), it will get up to 81% the highest ive gotten it, then gives me an error.
When I try to flash another stock rom I found here, the 2.10 ship rom, i cant get it passed 23%.
anyone know what I have to do to fix this brick?

bbsix6 said:
When I try to flash another stock rom I found here, the 2.10 ship rom, i cant get it passed 23%.
Click to expand...
Click to collapse
are you trying with 2.10.0 which comes as an .exe file, or 2.10.1 which doesn't? Because the 2.10.1 rom found in the tmous section stock roms thread is treated by the phone as a cooked rom, (requires hspl) and doesn't include the stock spl. Make sure to use the 2.10.0
Also, can you connect to the phone with hspl3? if so, can you reset the hspl to 2.08.0000? (thats good enough for warranty, and it may also fix the flashing problem.)

Related

Spl: 1.42.000

if im in the us where can i find this version to down load it. i cant track it down on htc support.
spl comes as part of stock roms.
assuming you have a tmous?
if so, any rom that includes 1.42.0000 spl will brick your phone permanently.
care to give more detail what you are trying to achieve, including your phone model?
i have the htc hd2
screen after teh volume reset is
PB81120 SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
its how i have it since i bought it i havent done the update that has been released by t-mobile yet. Id like to get it to where i can flash other roms on it but its at 2.10.0000 and of course wehn i run the program to put HSPL on there it tells me i need first SPL 1.42.0000. any advice would help
i think there are different hspl designed for each spl is
okay, take carefull note of this
you have a 'tmous' or 't mobile us' version of the hd2.
This is important, you WILL kill your phone if you try to flash ANY official rom other than those for the tmous.
You don't need spl 1.42.0000, you need spl 2.08.0000, and that will allow you to use hspl1024 (see in my sig)
go to '[ROM]Leo 1.5 T-MOBILE Test & Stock ROMS' thread in the tmous rom development thread,
find and download rom 2.10.0
connect to usb, run the .exe, let it install, and voila, , , your spl is now 2.08.0000 and hspl1024 will now work.
You are currently in the regular hd2 section, you do not have a regular hd2, you should bookmark THIS and do all your rom finding, etc. there.
Apps, and themes from teh regular hd2 section will work fine on your tmous, but not roms, and especially not radios.
When picking a rom, be sure that the chef has marked it as 'tmous compatible'. If you aren't sure, don't bother.
all is good
i think i made a huge mistake..anyway i'm a noob (still)...so this is my story:
i flashed succesfully wp7 on my hd2 ..so i didn't liked it and i decided to go back on wm6.5 and flashed with a stock rom with 1.42 spl...
now i'm trying again to flash hspl so i can have a cooked rom like before but it gives me an error...it says that i need spl 1.42 in order to do that...but when i flashed the stock rom the spl remained 2.08 and it looks like this:
spl-2.08.hspl 8g XE
cotulla HSPL 0x05 0x40
can anyone help me?
now i made it with hspl2. i have spl 1.42 hspl but i can't flash a custom rom or radio :error code 240?
fix robotic voice running android 2.2 via sd card.
running andriod 2.2 via sd seemed to work ok apart from the robotic voice during calls i'm led to believe that you need to change the radio version which opened up whole new kettle of fish
Tried to install HSPL, which it wont because it requires spl version 1.42 to install HSPL
Can anyone shed any light on how this is done without bricking the phone permanently? or is there a better way to ultimately run android 2.2 from the sd card.
current spec
os 5.2.21913
rom 3.14.405.2
radio 2.15.50.14
spl -3.03.0000
any feedback much appreciated.
barryhd2 said:
Tried to install HSPL, which it wont because it requires spl version 1.42 to install HSPL
Click to expand...
Click to collapse
that version of hspl went out of date ten months ago. use hspl2 which works with any spl.
barryhd2 said:
Tried to install HSPL, which it wont because it requires spl version 1.42 to install HSPL
Click to expand...
Click to collapse
that version of hspl went out of date ten months ago. use hspl2 (download from teh same hspl thread, the link directly underneath the one you downloaded.) which works with any spl except 3.03.0000

[Q] HD2 Completely locked down

I have been searching and googling for over 2 hours straight and cant find any solution to my problem:
I was going to install the Custom HD2 Android. But my radio was to old. so I decided to update it with the newest rom.
I Installed the HSPL thingy, did the whole renaming and placement of LEOIMG.nbh
and tried to install it via bootloader. But it stopped at 9% telling me: "00028002 Not allowed"
So now I cant get passed a screen:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Upgrade ROM code error
Please try again
USB
I'm starting to believe there is nothing I can do.. Cant access my sd card when plugged to the pc or nothing..
Is there ANYTHING someone can help me with?
I believe your problem lies with SPL 3.03. I don't think even the latest HSPL will work. I think what you have to do is flash an older stock ROM in order for your SPL to revert to 2.10. Then use HSPL3 to HSPL your device. Then you can flash any ROM you want.
juggs said:
I think what you have to do is flash an older stock ROM in order for your SPL to revert to 2.10. Then use HSPL3 to HSPL your device. Then you can flash any ROM you want.
Click to expand...
Click to collapse
won't work on none tmous phone because spl 3 won't let itself downgrade to spl1. just like spl2 wouldn't downgrade to 1.
the tmous users CAN downgrade from 3 to 2, but there are no spl2 roms for none tmous users.
@OP
if you have a tmous phone then flash a stock tmous rom from sd card.
if you have a normal hd2 then you are stuck on spl3 until hspl gets updated.
EDIT - my answer was incorrect, I was being wary until someone confirmed the spl CAN be downgraded by flashing a correct stock rom for your phone (USB is fine), or by using a goldcard.
Leffernan said:
I Installed the HSPL thingy, did the whole renaming and placement of LEOIMG.nbh
and tried to install it via bootloader. But it stopped at 9% telling me: "00028002 Not allowed"
Click to expand...
Click to collapse
you flashed the 3.x rom from sd card. the first thing an sd card flash does is remove hspl, and replace it with stock spl. next, the rom checks that the phone matches the rom, which in your case it doesn't, so it stops and fails.
you could try forcing an spl 2.08.0000 tmous rom on it using goldcard, in the hope it will then allow you to run hspl2.
But all of this requires me to have access to my sd card? I don't have that :\
ah ok.then its time to wait for the next hspl version to support spl3.x
Would it be too much to ask if you could send me a pm or a mail at [email protected] whenever that happens? Probably going back to a good old Sony Ericsson in the meantime, hehe
i'd like to say yes, but it could be several weeks, and i can barely remember to feed myself from one day to the next, so..... heh.
however When it does come out, it will be hard not to notice, just skim the latest thread titles every day or two.
edit - oh, and don't give up just yet, I could be mistaken, its not unusual!. i haven't touched the 3.x rom/spl yet, so i could be wrong.
this thread, for instance,
http://forum.xda-developers.com/showthread.php?t=814838
suggests that the spl CAN be downgraded. reports are still confused.
you could for instance try flashing the 3.x rom over usb using SSPL, and then you'd at least have a working phone.
EDIT - MY RESPONSES IN THIS THREAD WERE NOT BASED ON ALL THE INFORMATION WE NOW HAVE REGARDING SPL 3.03
THE 3.03 SPL CAN BE DOWNGRADED EASILY BY USING THE CORRECT STOCK ROM FOR YOUR PHONE, FLASHED EITHER USB OR SD CARD.

[Q] HTC HD2 - Internet Problem - This connection is pre configured?

Hey,
I am in India. My friend has just given me a HTC HD2. I have performed a factory reset on it.
Now, when I try to open any website I get the below message.
"T-Mobile internet
This connection is pre-configured. It cannot be modified."
Please suggest how to overcome this. I have never faced such kind of problem in my earlier Windows 6 Mobile Phones.
I have googled it and found that I need to flash the ROM of the phone to enable other carriers data settings.
BUT, I am not sure which ROM to download and how to install it
Regards,
Ankur
ok first of all be VERY careful, sounds like it is a tmous (t mobile US)
does it have green send & red end keys?
if yes then you CANNOT flash ANY stock roms (except tmous), so do not try to change the language or region by flashing a different stock rom. you WILL kill it.
Apply hspl and find a tmous compatible cooked rom, or perhaps look into android.
If no, if the send and end keys are white, then you can simply apply HSPL and flash anything you like, which will most likely get rid of that stuck connection.
Thanks a ton for your time Sam. I really appreciate this.
It has white keys just like the in the attached pic.
I have installed HSPL on my device using this thread youtube video to install HSPL. I searched "How to install HSPL (HardSPL) to the HTC HD2 (Leo)" and tried it
Bootloader before HSPL
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Click to expand...
Click to collapse
Bootloader after HSPL
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x40
Click to expand...
Click to collapse
Now, I need to Flash any ROM on it. I am not sure which on to use. Request you to please send me any link of any ROM which is suitable for my phone.
Although, I have downloaded 190 MB file -RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe. I am not sure if I can use it.
Thanks again for your help.
Ahh. Then you have a regular hd2 and there is much less danger.
You can take your pick. The rom you mentioned is old. 3.14 is the latest.
samsamuel said:
Ahh. Then you have a regular hd2 and there is much less danger.
You can take your pick. The rom you mentioned is old. 3.14 is the latest.
Click to expand...
Click to collapse
Hi Sam,
I tried on the HTC Europe site, when I am trying to download I am getting the error in the attached screenshot.
Can I download "Download Artemis 56.0 WWE (English)" from here ?
OR
this one given here.
Please suggest which one to go for, I am absolutely new to Flashing ROMs.
Also, can I Flash the new ROM using Microsoft Activesync, I saw the procedure in this youtube video and found it very easy.
I am extremely sorry if I am annoying you, but I have another small question. What if I mess up while flashing new ROM, will I be able to restore back to my Original Phone.
Thanks a lot again. You people are gems.
you can flash any of those roms. dont get confused by the words 'activesync', , , the best way to flash is to put teh phone uin bootlaoder yourself first, THEN run the flash over usb. activesync will not look like it is connected, but dont worry.
Yes, sure, go for the artemis rom. you need 3.03.hspl for that rom, so
hspl4 - 3.03.hspl - flash the rom.
or, since you already have spl 3.03.0000, you can avoid hspl and use sspl to flash the artemis rom.
samsamuel said:
you can flash any of those roms. dont get confused by the words 'activesync', , , the best way to flash is to put teh phone uin bootlaoder yourself first, THEN run the flash over usb. activesync will not look like it is connected, but dont worry.
Yes, sure, go for the artemis rom. you need 3.03.hspl for that rom, so
hspl4 - 3.03.hspl - flash the rom.
or, since you already have spl 3.03.0000, you can avoid hspl and use sspl to flash the artemis rom.
Click to expand...
Click to collapse
Great, I have flashed HSPL4 3.0.3.HSPL using this link
Now, I have this in my bootloader
PB81100 HX-BC
SPL-3.03.HSPL XE
0x05
CotullaHSPL 0x40
Click to expand...
Click to collapse
As suggested, I will now download and try installing Artemis rom from here
Many thanks Sam,
I am a relieved man now. I have flashed Artemis ROM.
All is working well, now I am able to browse internet perfectly
I just found bug (I believe), when I try to increase volume "during call" , the phone hangs. Otherwise it works well.
Now, I am looking a "registry entry" to fix this.
Again, thanks you made my day.

[Q] Bricked phone with SPL 3.03

It seems that my phone is bricked after I tried to flash a stock rom on it (3.14 something), which is obviously not for my phone because it is WWE. That failed flash left me with SPL 3.03 and now I can't flash anything else. Tried to Hard reset it with another stock rom from the sd card, but failed again. Any ideas how to fix it?
Hspl4, pick whatever spl you want.
or, use your serial to grab a rom from HTC website, into bootloader, flash it.
I tried using the usb flash aproach but it failed as well.
So I tried hard reseting with a stock rom on the sd card and I got this on the red green blue screen when after it failed.
pb81100 hx-bc
spl 3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
wrong stock rom. Only the CORRECT stock roms will work, hence using your serial number on eth htc website.
Thats the usual reason for this type of error, wrong stock rom from sd card.
I got my spl to 1.42 but it gives me error when I try to flash this rom from the official web site. RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
And none of the roms on the htc site accepts my S/N. Which rom should I get?
Where's the phone from? Its down to you to find out. Example, mines from o2, so I would try to download o2 roms cos wwe wouldn't work.
Course, the easy way is to use hspl4, and then flash any rom you like OVER USB.....SD will remove hspl and then fail, which is prob what happened to you in post 1
I think the phone is from Germany, because the packaging is in German. I used Energy rom before, so can I use it to flash via the usb cable ?
bqlkovich said:
I think the phone is from Germany, because the packaging is in German. I used Energy rom before, so can I use it to flash via the usb cable ?
Click to expand...
Click to collapse
Yes but flash HSPL first, I suggest you use HSPL 3.03 which is in HSPL 4.
Thanks guys, fixed it. Now I'll try installing Android on the SD card.

[Q] HD2 from NAND Android to Stock WM6.5

As the title says, I had NAND Android running (2.2) on my HD2 with magldr 1.13 My battery started giving me issues (short life) and to claim on my guarantee, I wanted to clean up the phone so they don't give me any excuses not to exchange.
Unfortunately, I simply tried to flash a stock WM6.5 rom (3.14 WWE) straight from the SD card using VolDown while turning on. It simply stopped about a minute into the process, restarted, and I get faced with the infamous ! triangle with "Software update failed."
I try the VolDown thing again and I get given:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Upgrade ROM code error
Please try again
So I try using the PC RUU update facility. BAM! Invalid Vendor ID.
So, is this just an issue of the wrong rom? I bought the HD2 here in South Africa and as far as I know, there was no branding whatsoever on it.
Any suggestions?
Zen_Jackal said:
So, is this just an issue of the wrong rom?
Click to expand...
Click to collapse
correct. the flash was allowed to start because you had hspl installed, (otherwise it would never have even started, you would have just seen bootloader flicker for a second), and step 1 of an sd card flash is update the spl, which became 3.03.0000 and then it rebooted and checked the vendorID and found a mismatched rom and failed.
you can either...
1
use hspl4 to set 3.03.hspl, flash the rom you just used but using USB, then use hspl4 again to reset spl to 3.03.0000
2
go to htc.com and find a rom that it allows you to download using your serial number, and flash that.
Well, step 1 worked like a charm. Thank you so much.
Now I see I have another issue. At some point in the past, I put a custom boot splash (I think it is). It pops up when those three red lines of info about radio version etc. appear. I'm not sure if this is the custom splash or what, but I'd like to get rid of it too. Where can I find the stock splash image (again, if it *is* that)?
does it first come to the stock splash, for 7 seconds, and then switch to the custom one when the red lines appear? if yes, that's the secondary splash screen, you can get info about it in my sig 'watermark your leo'. Some stock roms will reset that, some seem not to.
Strangely, thats the area of memory that magldr uses, so odd that its returned to the previous custom one.
Yeah, that's the one...
When I run an nbh file with a RUU .exe I found that's supposed to contain the stock splash and animation, the progress bar just sits at 0%... maybe I need to use that nbimg file floating around here with a bmp of the stock splash? Or maybe I could remove that 2nd splash altogether?
Hangs at 0 because it needs hspl.
So, I should install HSPL, remove the splash, then re-flash the stock ROM to remove HSPL again?
I'm in the same situation. But I have the stock tmobile (uk) ROM from HTC website that I used my serial to get....so can I just flash it and it will revert everything to stock?
Sent from my HTC Sensation Z710e using XDA App

Categories

Resources