hey everytime i try and change my wall paper i get this error.. can anyone tell me why and how to fix it..?
likwid25 said:
hey everytime i try and change my wall paper i get this error.. can anyone tell me why and how to fix it..?
Click to expand...
Click to collapse
Hi there
You are getting '' This error'' ?
A litlle more info is needed i think.
Plz post wat error you are getting.
And it,s always a good thing to put your Rom and Manila info in it to.
And maby its a question for the CHT thread
Greetz.
the error says:
an unexpected error has occured in CHT_Wall.exe
Select quit and then restart this program, or select Details for more info
im going into cookies home tab editor and selecting a wall paper from my camera folder..
im using the stock rom v. 2.13.531.1
manilla version 2.5.20121412.2
likwid25 said:
the error says:
an unexpected error has occured in CHT_Wall.exe
Select quit and then restart this program, or select Details for more info
im going into cookies home tab editor and selecting a wall paper from my camera folder..
im using the stock rom v. 2.13.531.1
manilla version 2.5.20121412.2
Click to expand...
Click to collapse
Did you reed/saw this instruction on the CHT Thread?
I'm not sure if it is that, but maybe it can help you.
Q: I get this error message: CHT_Wall.exe OutOfMemoryException
A: You will get this message if the resolution of the image you have set for your wallpaper is too big. Try selecting a smaller resolution - anything below 10MP (around 3000x3000) will be OK.
Click to expand...
Click to collapse
Take a look on the CHT Thread;
likwid25 said:
hey everytime i try and change my wall paper i get this error.. can anyone tell me why and how to fix it..?
Click to expand...
Click to collapse
just install .Net v3.5
ok i already have Net 3.5 installed and the picture that i am trying to select is a small image file.. nothing bigger than 640x480 so its none of those.. any other ideas..?
just reinstall .Net v3.5 it worked for me
Related
hey i am trying to change my rom from the pro black 3.0.1 version. but every time it gose to update the active sync connection closed down and i get a connection error. then it connects again.
Any ideas what to do ?
i'm updating to HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108
regards in advance
anyone? any ideas
Got an SD card?
get Hard-SPL v7 and install that on your PDA first,
then extract the installer, then extract the RUU_Inside file and rename the RUU_signed.nbh to HERMIMG.nbh and throw it on your memory card, then reset into the bootloader and press the power button to update
You can also try putting into bootloader mode (tri color screen) manually and then running the RUU package - manually selecting the appropriate SPL version. Be sure to select the right one though.
On that thought, be sure to do HardSPLv7 as the first upgrade - will protect the phone from getting permanently stuffed.
graztd said:
hey i am trying to change my rom from the pro black 3.0.1 version. but every time it gose to update the active sync connection closed down and i get a connection error. then it connects again.
Any ideas what to do ?
i'm updating to HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108
regards in advance
Click to expand...
Click to collapse
It is also possible that you have Windows Vista as OS on you're computer. Then you first have to change you're WDMC. These settings have to be done, believe me. At least if you have Vista! The procedure can be found in the Mr Vanx guide, see my signature.
Good luck
Thanx guys got it working now
an dno dont have vista but a friday of mine does an he hand that problem so thanx for the info
Glad U were able to get back on the road again!
jump here: http://forum.xda-developers.com/showthread.php?t=347451
How to build your own rom: first download the kitchen, then replace the boot.rgu in XIP folder with the one abusalza attached in his thread. Then put the diskimage.nb0 in to rom folder (you can use jiggs'). Then double click dumpFiles.cmd, wait.....-> there will be 2 folder OEM&SYS created. Change things in those two, when finished-> double click BuildOS.cmd-> start-> wait........->close buidOS->wait the cmd window finishes, there'll be a diskimage created in Flash foder, copy and overwrite it to folder "ATOMWM607WWE6PP". And voila: you've got new rom
Okay, i'm trying to download it, would you upload to somewhere else else? mediafire seems have some trouble with my internet connection,. would you tell us more detail about, step by step installation, major and minor bugs, etc?what about you? have you tried your own ROM? does it works perfectly?
ofcourse I've tried it myself.
pp is 6MB
it has a bug: sim tool kit didn't work at all.
I don't know what happens to your network but I can download it very fast from here in Vietnam (with IDM). Can you ask somebody else to upload it to you ? I don't have much time to stay and wait for uploading it again.
steps to up this rom: download->unrar->connect your device with your pc by active sync-> double click Device Software Update Utility.exe-> then wait it,until finishing, easy hah ?
^^Downloading , will upload soon in about 30 - 45 minutes
Here's the link CLICK ME
medkid said:
ofcourse I've tried it myself.
pp is 6MB
it has a bug: sim tool kit didn't work at all.
I don't know what happens to your network but I can download it very fast from here in Vietnam (with IDM). Can you ask somebody else to upload it to you ? I don't have much time to stay and wait for uploading it again.
steps to up this rom: download->unrar->connect your device with your pc by active sync-> double click Device Software Update Utility.exe-> then wait it,until finishing, easy hah ?
Click to expand...
Click to collapse
do we need to enter to bootloader mode??
is it safe upgrading without entering to bootloader mode??
Flashing while in bootloader moder is safer although flashing without entering it would probably be successful but why take the chance
udayrulz said:
Flashing while in bootloader moder is safer although flashing without entering it would probably be successful but why take the chance
Click to expand...
Click to collapse
have you flash your atom with this rom?
how is it? succesfull?
is it faster mate?
Just about to man , waiting for it to charge up (was outta bat.)
Will let you know soon how it works mate.
udayrulz said:
Just about to man , waiting for it to charge up (was outta bat.)
Will let you know soon how it works mate.
Click to expand...
Click to collapse
thanks mate, i'll borrow my friend computer which use a faster broadband connection, might this help me to download the file,.
Mate , i am uploadin it too so dont bother borrowin the computer if you can download from rapidshare .
http://rapidshare.com/files/67638815/ATOMWM607WWE6PP.rar
udayrulz said:
Mate , i am uploadin it too so dont bother borrowin the computer if you can download from rapidshare .
Click to expand...
Click to collapse
great,. thanks uday,.
waiting for the link then,.
^^Link added to previous post
nice, its downloaded,.
well,. so many files,.
its a ROM Upgrade i've never done before,.
okay will try it,.
- Extract
- Connect Device by entering bootloader mode
- Run Software Update Utility
- Wait
was that right????
^^yes^^ , i am flashing it too now
Just finished with it , works fine
CONFIRMED!!
will write a short review soon
@medkid
Mate how am i suppose to run the flash plugin included , do i need to install the VLC player too coz i see you have included the plugin in the rom.
If i try to watch youtube video without installing the VLC player it gives me an error .
Am i doing something wrong??
okay,.
installed on my device already,.
well,.
i havent tried it any longer,.
but,. i like it for now,. hehe,.
hei medkid, what was that, the bottom line? color red, yellow, green??
I've included Flashvideobundle.cab in extended rom, if u installed it, you can go to start menu\programs\internet, you will see an IE shorcut right there.
But, you have to install TCPMP 0.72 to play FLV files directly from those sites
Garmin said:
okay,.
installed on my device already,.
well,.
i havent tried it any longer,.
but,. i like it for now,. hehe,.
hei medkid, what was that, the bottom line? color red, yellow, green??
Click to expand...
Click to collapse
that's your battery level, you will see it moving when it's charging
here's another link
http://www.megaupload.com/?d=7WZ7NS7C
udayrulz said:
here's another link
http://www.megaupload.com/?d=7WZ7NS7C
Click to expand...
Click to collapse
he he, thank you, but don't be so fast mate , I've built another rom when you upload it
i tried to update to wm6.1
then my phone hanged to the boot loader screen.
i tried to reverse to the old way i get the error 300 invalid update tool,
i tried to upgrade the hardspl using the upgrade tool it replies the same error
i tried to use PVtemp, it replies the same.
can anyone help me ?! PLEASE URGENTLY
btw i've search the forum for answers specially http://forum.xda-developers.com/showthread.php?t=353547 which was very helpfull but still have the same problem,
crazy_luv said:
i tried to update to wm6.1
then my phone hanged to the boot loader screen.
i tried to reverse to the old way i get the error 300 invalid update tool,
i tried to upgrade the hardspl using the upgrade tool it replies the same error
i tried to use PVtemp, it replies the same.
can anyone help me ?! PLEASE URGENTLY
btw i've search the forum for answers specially http://forum.xda-developers.com/showthread.php?t=353547 which was very helpfull but still have the same problem,
Click to expand...
Click to collapse
replied to you, see my thread...
==Solution Found==
==Solution Found==
okay let me explain, the rom update utility shipped in PVtemp file seems not working and always gets that error 300.
i used ftp://xda:[email protected]
and the same nknbf file it worked fine till now it's 82% now wish me luck
am planning to do HARDSPL afterwards ..and reupdate with the WM6.1 again
WISH ME LUCK
crazy_luv said:
==Solution Found==
okay let me explain, the rom update utility shipped in PVtemp file seems not working and always gets that error 300.
i used ftp://xda:[email protected]
and the same nknbf file it worked fine till now it's 82% now wish me luck
am planning to do HARDSPL afterwards ..and reupdate with the WM6.1 again
WISH ME LUCK
Click to expand...
Click to collapse
good luck
what was the full path of the tool you used to fix the update tool problem? im getting the same thing and it sounds like you might have a viable solution, but the link is broken.
shizenyasuya said:
what was the full path of the tool you used to fix the update tool problem? im getting the same thing and it sounds like you might have a viable solution, but the link is broken.
Click to expand...
Click to collapse
http://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e
Flash to WM5 ( as the result..) with the about NVID
Only in bootloader
My htc could only start in bootloader mode and it seems to freeze in this mode(i can tell this because when i remove the cable it still writes USB in the left corner). How can i flash a rom to it. Please help me.
w4rius said:
My htc could only start in bootloader mode and it seems to freeze in this mode(i can tell this because when i remove the cable it still writes USB in the left corner). How can i flash a rom to it. Please help me.
Click to expand...
Click to collapse
where no one read my sticky thread??
In tried Sd flashing(none other way works(
it stops for 5sec on
"Checking SD content"
but the processbar doesn´t change and then it goes to bootloader without changing anything.
i have same prb with my imate kjam... i tried to upgrade now its dtuch on start..
and itoo getting error when i tried to instal no vender rom.. plz tel me guyz. plz help me.
Little tutorial I made on how to change the gene splash screen, I'm ataching the files with tools and instructions.
Based on the Wizard tutorial.
hope u like.
Thanks.
MarceloFB said:
Little tutorial I made on how to change the gene splash screen, I'm ataching the files with tools and instructions.
Based on the Wizard tutorial.
hope u like.
Thanks.
Click to expand...
Click to collapse
will this work on p3400i
I have absolutely no idea, ask the gurus!
I have used this on the p3400 with hard spl, and worked like a charm!
MarceloFB said:
I have absolutely no idea, ask the gurus!
I have used this on the p3400 with hard spl, and worked like a charm!
Click to expand...
Click to collapse
This will work with P3400i as well.
Good Work!!!!!!
finally i changed my splash screen
help
i am having some problems..... when im running the nb image converter...... im getting some error messages............ some body please help
comdlg32.ocx is not correctly installed
Really well done man! It worked on my new gene, htc P3400i Now i have my photo on my bootsplash too
@go4thomman: If this is happening in vista, right click on file and click properties. ON the compatibility tab, enable compatibility for XP SP2 and check the box for "Run as Administrator". Click OK, run it and press OK if Vista asks you for admin rights.
Enjoy!
MarceloFB said:
Little tutorial I made on how to change the gene splash screen, I'm ataching the files with tools and instructions.
Based on the Wizard tutorial.
hope u like.
Thanks.
Click to expand...
Click to collapse
thanks. great app
EDIT:
Not working - "Unable to execute GLUE.EXE" any idea?
i did it 1 month back
no its happening in windows XP. the exact error message is ....
"component 'com32dlg.ocx' or one of its components not correctly registered : a file misssing or invalid"
please help guys...
splash.bat and glue is not working...
In command line glue is showing some error like
"cannot found aa or .001 files".
i tried creating a nbh with a nb image of 150k and i pad it with htcrt to default size. but now its only showing a green screen .....
is there any other tool other than glue for increasing the size......
please help,...
go4thomman said:
please help guys...
splash.bat and glue is not working...
In command line glue is showing some error like
"cannot found aa or .001 files".
i tried creating a nbh with a nb image of 150k and i pad it with htcrt to default size. but now its only showing a green screen .....
is there any other tool other than glue for increasing the size......
please help,...
Click to expand...
Click to collapse
I have no idea, Glue is not working in my home PC but working in my Office . But don't you dare tell it to my boss .
In my case, the error was "Unable to execute Glue.exe". Please try to re download the zip file and retry, there is no reason why it shouldn't find the 001 file !
Hope you have XP SP2 installed? Any way try to install VC++ redistributable if I am not wrong, it updates Microsoft common dialog control ocx and dll, not sure though. But give it a shot. Also you need .Net Framework 2 or higher to run htcrt, please give it a shot.
Thanks Addicted2xda.....
Problemo Solved.........
I downloaded com32dlg.ocx and VC++installation........ i dont know what is this com32dlg.ocx ......but my system had only com32dlg.dll .... now everything is working fine,..........
finally any idea how can we use "Gif" (animated) files for Splash screens and welcomeheads???..... I am sure we can use them..... I have seen many devices......
Animated Splashes are currently not working on my ROMs. I am working on it, will tell u when i get successful.
i need hlp to update p3400
i am unable to update my p3400 it always gives error use new update tool pls hlp to update
Hi please can someone give me a hand.I am trying to flash my device as i naffed it changing the fonts on device.
first problem is flashtool is now saying scatter file is not LEGAL and then i get another saying brom error (1013) port fail... the preloader what was the big problem at first but i installed that after an hour or so...i just can not get this device flashed..nightmare...
please point me to what i am doing wrong
and when i try to use MDTflashtool i get error Microsoft Data Access Components 2.1
whats going on....
many thanks
IS THERE A ANDROID TOOL I CAN USE TO COMPLETELY FORMAT A DEVICE?
sas007 said:
Hi please can someone give me a hand.I am trying to flash my device as i naffed it changing the fonts on device.
first problem is flashtool is now saying scatter file is not LEGAL and then i get another saying brom error (1013) port fail... the preloader what was the big problem at first but i installed that after an hour or so...i just can not get this device flashed..nightmare...
please point me to what i am doing wrong
and when i try to use MDTflashtool i get error Microsoft Data Access Components 2.1
whats going on....
many thanks
IS THERE A ANDROID TOOL I CAN USE TO COMPLETELY FORMAT A DEVICE?
Click to expand...
Click to collapse
come on please guys anything...help me
every time i try to flash i am now getting this error in sp flashtool.
"BROM ERROR S_COM_PORT_OPEN-FAIL.(1013)" PLEASE ANYONE GIVE ME A HINT I AM PULLING MY HAIR OUT
u need to run it as adminstrator
i got the same error when i ran it as normal program
then i went an run it as admin an then it worked
-fluffy- said:
u need to run it as adminstrator
i got the same error when i ran it as normal program
then i went an run it as admin an then it worked
Click to expand...
Click to collapse
Thanks for the info will give it a go
Sent from my e1901_v77_gq2002_fg using Tapatalk 2
-fluffy- said:
u need to run it as adminstrator
i got the same error when i ran it as normal program
then i went an run it as admin an then it worked
Click to expand...
Click to collapse
thank for the help,
now i dont have the error 1013 but i have a new error that is 6010 (code_download_forbidden)
please help
talvigi said:
thank for the help,
now i dont have the error 1013 but i have a new error that is 6010 (code_download_forbidden)
please help
Click to expand...
Click to collapse
the only thing u need to uncheck is preloader
an is it the right scatter file u are using
1013 error
i'm having 1013 error please help meeeee.....
Hi ,I had a 1013 problem and solved by changing the option in the connection tab by High Speed & With battery
tried to flash again with battery inside and it worked!
hi guys
im trying to flash on my huawei g750-u10
and im getting this error over and over again
i try to change cable change port reinstall vcom drivers but not working any thing
how to fix it ?
see this : https://ibb.co/bFnhgk
-fluffy- said:
u need to run it as adminstrator
i got the same error when i ran it as normal program
then i went an run it as admin an then it worked
Click to expand...
Click to collapse
Oh, thank you, I got rid of it.
Thumbs up Man!:good: