Since a week ago I'm having a strange problem. Bottom part of my screen doesn't respond well to touch input. I think its kind of out of calibration or is it broken? Does anyone else have this problem?
I've installed several ROMs but all of them have the same problem. Is my Hero dying?
This is a well documented problem. Try searching the forum for the related posts.
Thanks. Unfortunately I couldnt find exact answer to my question.
Would you please be kind enough to give me a link to the solution?
http://forum.xda-developers.com/showthread.php?t=595485
OK. Thanks man. I guess I have problem. Here there is no official HTC center so I guess I have to deal with it. For thos in my condition, The original HTC keyboard works the best for me and with it I have little to no problem unlike default Android keyboard.
I had the same problem before.
But without a service center, you are out of luck.
Maybe try those DIY guides they have on fixing this problem.
Related
Hey guys,
I do got some issues with the WIFI reception on my gtab. The signal is always very low and weak. I tried every rom, even did an NVFlash to go stock but that didnt help either. I did put carbon stickers on the whole device though, can that have any impact? Are there more people with this problem and if so have you got stickers on the device? Please let me know, thanks in adance!!
Peace!
After submitting this post my connection dropped which it also does more often.
Anyone has a clue?
3sade,
I actually had this same problem about 2 weeks ago. I would be directly over my WiFi AP and had a weak signal (2bars) no matter what ROM I used. I called up GTab support (310) 228-4000 and opened a RMA with them. Despite what's I've read in other posts, support was very nice and willing to help for me. They will tell you that you'll have to remove the carbon stick from the device and restore it to the stock ROM. That part sucks but when I got my gtab back (14 business day wait), it is in better working condition then when I sent it to them (the screen is more responsive, seems less sluggish with the stock ROM).
I don't know if this is what you were hoping to hear, but I thought I would pass it along.
I'm sorry to reply to an old thread but I've just recieved a hannspad sn10t1 which I believe has similar if not the same hardware as the GTab. I'm having the same issue with wifi connection, if I actually touch it to the router then I might get 3 bars! I definately cant leave the room and still be connected.
Have I got a faulty unit or is there a software or settings fix? By the sound of this its a hardware fault but I'd rather try and find a fix first.
htc-rocks said:
I'm sorry to reply to an old thread but I've just recieved a hannspad sn10t1 which I believe has similar if not the same hardware as the GTab. I'm having the same issue with wifi connection, if I actually touch it to the router then I might get 3 bars! I definately cant leave the room and still be connected.
Have I got a faulty unit or is there a software or settings fix? By the sound of this its a hardware fault but I'd rather try and find a fix first.
Click to expand...
Click to collapse
Most definitely a hardware issue. It sound like your antenna is not even connected at all. I would contact the manufacture for a RMA. If not crack it open and find the antenna
Hi all!
I have a problem with my mini pro and would be most thankfull, if anyone could help.
Since a while now, my front speaker is not working anymore. I am using my phone with an unlocket bootloader, custom kernel and custom rom. First I thought this might have to do with that, since I first noticed it after trying an ICS beta (CM9). I did go back to SE-kernel and also restored everything with SEUS, but nothing worked. I have used various kernels and roms since, but my front speaker has not been working again.
Today I got a new speaker and changed it myself. Unfortunately, this still did not bring any changes, no sound at all.
Now I am a bit clueless, if this is really a hardware-issue or could be software related after all??
If any of you has any idea on the topic, it would be great.
All the best,
Jonathan
DerJonathan said:
Hi all!
I have a problem with my mini pro and would be most thankfull, if anyone could help.
Since a while now, my front speaker is not working anymore. I am using my phone with an unlocket bootloader, custom kernel and custom rom. First I thought this might have to do with that, since I first noticed it after trying an ICS beta (CM9). I did go back to SE-kernel and also restored everything with SEUS, but nothing worked. I have used various kernels and roms since, but my front speaker has not been working again.
Today I got a new speaker and changed it myself. Unfortunately, this still did not bring any changes, no sound at all.
Now I am a bit clueless, if this is really a hardware-issue or could be software related after all??
If any of you has any idea on the topic, it would be great.
All the best,
Jonathan
Click to expand...
Click to collapse
Bro I had the same issue with my phone.. It is the flex which goes from the motherboard to the lcd part (upper half of the slide) which might be damaged probably causing no connection to the front speaker.. U get it replaced by the SE serice center.. Thats the only way.. hope it helps..
Sent from my U20i using xda premium
Please explain the sense of your silly full-quote!
I never understand why people quote the whole post when answering directly to a post.
steiff said:
Please explain the sense of your silly full-quote!
I never understand why people quote the whole post when answering directly to a post.
Click to expand...
Click to collapse
Does it really matter.. ?!! Atleast I am helping him out and If you cant help others stop posting crap.. !!
Peace..
Sent from my U20i using xda premium
Hi there, first of all, dissasemble your cellphone, here you have the service manual, it has everything you could need to make a hardware rapair, including dissasemble and reassemble videos. http://www.cpkb.org/wiki/Sony_Ericsson_E10i_Xperia_X10_mini_service_manual
Once you obtained acces to the speaker, test it, you can do it taking a wire with a 3.5 plug on one end, and bare wires on the other end, by plugin it on an mp3 player and making sound going trough the speaker. If your speaker works, you will have to take the schematics from the service manual, follow the circuit and locate the failure. Most common failures are a flex broken or pressure contacts failure but you can have problems like this one, that are more difficult to find and solve http://forum.xda-developers.com/showthread.php?t=1472440. If your speaker doesn't works, just replace it.
Any problem just say it
Sorry, The service manual for The mini pro is here! http://www.cpkb.org/wiki/Sony_Ericsson_U20_Xperia_X10_Mini_Pro_service_manual
Sent from my E10i using XDA App
Thank you all very much for your replies!
It sounds like you all do believe it must be a mechanical problem. I allready changed the fron speaker by myself, but it is still not working. I will see how the flex looks!
But it is good to know, none of you thinks, it could be something with the custom rom/kernel
same problem for me man!
have you solved the problem after all?
i've tried to check with a tester and it seems that there isn't signal on the two contacts of the speaker...so i think the problem isn't the speaker but it is on some connection!! (maybe the main plan connector that connect the keyboard part with the sceen part)
Hi There People, I'm sorry if this issue was already solved in another thread, I just couldn't find it. =/
I've gotten an ATRIX MB680 that is not connecting callings. I've seen that some other users have had this same problem and solved it, however I wasn't successfull in solving it myself. I've turned it to stock Gingerbread ROM, changed radios but NOTHING so far. I REALLY need this phone working ASAP. Does anyone know how to and if this issue is solvable? =/Anyways, thank youbso much for the help.
Aquele Abraço...
Hello everyone
I explain my problem.
I bought it a few Blacview Zeta, this phone encountered problems with the GPS and network reception problems.
I thought, "How bad idea" that I went searching on the internet an official rom to see if the problems could beings corrected.
I went to the official website of BlackView then I followed a link to download the rom.
While Roma are available on their official forum, so I download with confidence, I flash the phone, I restarts the phone and then surprise the display is illuminated but a black screen with vertical and horizontal lines.
The phone responds well to touch and hear different sound when you click on the screen. But we see nothing except the lines.
So I posted on the forum, but none of my posts do appear, I send messages directly to the contacts available on the official website no answers.
So I searched the internet for several days so I found other Roma.
I found three different rom a v0.5 and a v0.6 v0.7 but the problem remains the same at the screen.
I also saw the other person have the same problem as me, but she did not find one solution.
To me it seems that this is a graphic driver problem, a hardware modification to the model to be made that I own.
So I'm looking desperately this rom "S509_G3_Blackview_Zeta_V1.2_20160309" which is the one that corresponds to my phone.
I know my message is long, but I tried to explain to me the best.
Anyway thank you to everyone who can help me
sincerely Vincent
seven00766 said:
Hello everyone
I explain my problem.
I bought it a few Blacview Zeta, this phone encountered problems with the GPS and network reception problems.
I thought, "How bad idea" that I went searching on the internet an official rom to see if the problems could beings corrected.
I went to the official website of BlackView then I followed a link to download the rom.
While Roma are available on their official forum, so I download with confidence, I flash the phone, I restarts the phone and then surprise the display is illuminated but a black screen with vertical and horizontal lines.
The phone responds well to touch and hear different sound when you click on the screen. But we see nothing except the lines.
So I posted on the forum, but none of my posts do appear, I send messages directly to the contacts available on the official website no answers.
So I searched the internet for several days so I found other Roma.
I found three different rom a v0.5 and a v0.6 v0.7 but the problem remains the same at the screen.
I also saw the other person have the same problem as me, but she did not find one solution.
To me it seems that this is a graphic driver problem, a hardware modification to the model to be made that I own.
So I'm looking desperately this rom "S509_G3_Blackview_Zeta_V1.2_20160309" which is the one that corresponds to my phone.
I know my message is long, but I tried to explain to me the best.
Anyway thank you to everyone who can help me
sincerely Vincent
Click to expand...
Click to collapse
Hello
my position is still relevant, I am still waiting for a solution.
Thank you to all
seven00766 said:
Hello everyone
I explain my problem.
I bought it a few Blacview Zeta, this phone encountered problems with the GPS and network reception problems.
I thought, "How bad idea" that I went searching on the internet an official rom to see if the problems could beings corrected.
I went to the official website of BlackView then I followed a link to download the rom.
While Roma are available on their official forum, so I download with confidence, I flash the phone, I restarts the phone and then surprise the display is illuminated but a black screen with vertical and horizontal lines.
The phone responds well to touch and hear different sound when you click on the screen. But we see nothing except the lines.
So I posted on the forum, but none of my posts do appear, I send messages directly to the contacts available on the official website no answers.
So I searched the internet for several days so I found other Roma.
I found three different rom a v0.5 and a v0.6 v0.7 but the problem remains the same at the screen.
I also saw the other person have the same problem as me, but she did not find one solution.
To me it seems that this is a graphic driver problem, a hardware modification to the model to be made that I own.
So I'm looking desperately this rom "S509_G3_Blackview_Zeta_V1.2_20160309" which is the one that corresponds to my phone.
I know my message is long, but I tried to explain to me the best.
Anyway thank you to everyone who can help me
sincerely Vincent
Click to expand...
Click to collapse
Well coming back to you I found a ROM that matches my Zeta.
In made there are two versions of Zeta normal and V16, V16 I am..
Except that the rom that I found can be returned to the phone with "easy TRWP" I understand the procedure except that it must enable the USB debugging, but as I see absolutely nothing on the screen I can not activate it.
I know if a developer can do something with this rom so I can flash it with spflashtool?
I put a link is on my personal server that contains the rom.
I sincerely hope that someone finds a solution for me.
Because my skills are not sufficient to do something with this rom.
Thank you
Link :http://88.167.54.40:31796/share/M5neJI2eTFzDs7Yk/
seven00766 said:
Hello everyone
I explain my problem.
I bought it a few Blacview Zeta, this phone encountered problems with the GPS and network reception problems.
I thought, "How bad idea" that I went searching on the internet an official rom to see if the problems could beings corrected.
I went to the official website of BlackView then I followed a link to download the rom.
While Roma are available on their official forum, so I download with confidence, I flash the phone, I restarts the phone and then surprise the display is illuminated but a black screen with vertical and horizontal lines.
The phone responds well to touch and hear different sound when you click on the screen. But we see nothing except the lines.
So I posted on the forum, but none of my posts do appear, I send messages directly to the contacts available on the official website no answers.
So I searched the internet for several days so I found other Roma.
I found three different rom a v0.5 and a v0.6 v0.7 but the problem remains the same at the screen.
I also saw the other person have the same problem as me, but she did not find one solution.
To me it seems that this is a graphic driver problem, a hardware modification to the model to be made that I own.
So I'm looking desperately this rom "S509_G3_Blackview_Zeta_V1.2_20160309" which is the one that corresponds to my phone.
I know my message is long, but I tried to explain to me the best.
Anyway thank you to everyone who can help me
sincerely Vincent
Click to expand...
Click to collapse
well my problem is solved thanks to this forum http://www.htcmania.com/showthread.php?p=24006863#post24006863
thank you all anyway
Hi people, sorry if my english is not good.
Hi, thanks for reply me (and sorry if my english is not good)
The problem is LIKE this:
youtube.com/watch?v=iMnaUsH_Wfg
I went where i bought the mobile to repair it and they said "now all is OK, We change the display". But when I was come back to my home, the problem start again.
I come back to the shop again and they change me for other mobile but the same model.
3 hours all was perfect, but then, has started the problem again with the new mobile!!.
I read a lot of posts in Internet but i don't have any solution.
Someone can help me??
Thanks for all!!
Hello, I've tried in vain to get rid of this horrible flicker by flashing various ROMs. Sometimes it helped for a while, but the flicker always came back. Zopo seems to completely ignore this issue. So better don't expect to get a solution for this device ever. As PWM-dimmed monitors and TVs have become standard, unfortunately, it also seems to me that many people have become unresponsive (or rather dull) to this dramatically technical aberration, so the complaints are rather limited. At least some PC monitor vendors like BenQ have become aware of this impairment and offer flicker-free monitors (DC-dimmed instead of PWM). But, actually, PWM doesn't seem to be the issue here...?! I've tested with my DSLR and there are no PWM-typical hard light on-off cuts. Regardless of that, the flicker is visible and is more than disturbing. I've now switched to a flawless Moto G4 Play and will never ever buy any of Zopo's junk.