I've got problem with USB Host, when i plug in any device, nothing happens, pendrive doesn't flash with busy led.
What can be wrong?
Did you test a keyboard or Mouse?
I've got 3 usb mouses and none lights up.
methyl said:
I've got problem with USB Host, when i plug in any device, nothing happens, pendrive doesn't flash with busy led.
What can be wrong?
Click to expand...
Click to collapse
try using the official rom
Ok, i just need to softreset after i plug in device.
But I have gamepad with current draw 100mA and it doesnt work, i cant map any key in FpseCE, drivers was installed, i tried trick with 1_5 to Default rename.
Led on gamepad lights up, i've got no information about device on TG01.
Related
I am having trouble with my Pc not reading my HTC HD2,when i plug the USB cable in the PC it say's device not supported.
For the last six months i have had no problem i just plug it in and i could read the storsge card in my computer with the rest of the drives ie C: D: E: ect, now it wont read at all i have windows media device centre installed and it wont pick it up either,any ideas. I can bluetooth and charge the phone no problems ,Maybe the usb cable
Thanks
with teh phone connecvted, (after it has said not supported) open up device manager on the pc, find teh entry which will have an exclamation mark, right click it and choose4 uninstal. then try it again.
also worth reinstalling windows mobile device center
Hi Samsamual
When i open windows mobile device center it does nothing even while my phone is connected,it just says phone not connected,i have uninstalled windows mobile device center a couple of times and nothing happins,it seems that when i plug phone and USB cable in the usb port or pc just wont recognise it at all.
Thanks for your reply
harv123456 said:
Hi Samsamual
When i open windows mobile device center it does nothing even while my phone is connected,it just says phone not connected,i have uninstalled windows mobile device center a couple of times and nothing happins,it seems that when i plug phone and USB cable in the usb port or pc just wont recognise it at all.
Thanks for your reply
Click to expand...
Click to collapse
He did not say open device center , he said open "Device Manager", you can open it from computer management in the control panel ...
You did say it said "device unrecognized" that means the pc is "seeing" it , just not seeing it right ...
When in device manager find ,the item that is this "unknown device" if you are not sure which it is, unplug it see what dissapears, and what reappears when you plug it back in, it may just be under usb devices or the similar ..
Then Uninstall that device, then unplug the phone, wait a few seconds and plug it back in ... also plug it right into the computer do not use a usb hub ...
Thanks watcher,i understand now i did not read it right,i will try Device Manager now.
Thanks
harv123456 said:
Thanks watcher,i understand now i did not read it right,i will try Device Manager now.
Thanks
Click to expand...
Click to collapse
Still no luck,below pic's are the messages i am getting when i plug my phone into usb port.
Note my card reader and flash drive work ok on the same usb port,so i assume its my phone or usb cable.
harv123456 said:
Still no luck,below pic's are the messages i am getting when i plug my phone into usb port.
Note my card reader and flash drive work ok on the same usb port,so i assume its my phone or usb cable.
Click to expand...
Click to collapse
i have had several experiences with usb devices malfunctioning and causing that kind of error. and a few of those times i was able to isolate the problem to a faulty cable. but those were generic usb/miniusb cables (ie not supplied with the device... just available loose in the market). if its a cable supplied by the OEM, i doubt it would fail all of a sudden. but try swapping cables and see... good thing hd2 has a standard mini usb interface...
Thanks silenced i will try a different cable tomorrow thanks for your help
harv123456 said:
Still no luck,below pic's are the messages i am getting when i plug my phone into usb port.
Note my card reader and flash drive work ok on the same usb port,so i assume its my phone or usb cable.
Click to expand...
Click to collapse
Did you right click and Uninstall the "Unknown Device" then unplug and re-plug?? ...
Yes i did all that,i got a new USB data cable today and all works fine now.
Thanks guys for all your help,this is a great forum thanks evervbody.
harv123456 said:
Yes i did all that,i got a new USB data cable today and all works fine now.
Thanks guys for all your help,this is a great forum thanks evervbody.
Click to expand...
Click to collapse
Did you solve this problem because I m getting same problem with my cable. Charging but no connection with PC or Notebook. No Memory card reading or syncronize
HI !
I have an HD² with official Operator's ROM and my HD² never sync with my computer.
I want to know if it's possible to Flash everything without any sync (only by SD)?
Thanks a lot for my LEO
settings menu all settings connections connections usb to pc, untick "faster data". restart the pc, restart the phone.
it should now sync fine.
Thanks for the Answer, but I've already do this and the results is the same.
Sorry about my English cause I'm French
Go into Bootloader Mode (hold Volume button down while switching on the phone). You will get a tri colour screen with the word 'Serial' at the bottom of it. Plug in the USB calbe and it should change to 'USB'. If this happens then you can run HSPL and then ROMs - just ignore the conditions about making an ActiveSync connection prior to running.
I've already try this
But not exactly how you say.
I've plug the in the USB calbe when the HD2 was Off, and after loading the bootloader.
And nothing was happen.
Juste the 3 colors and the SPL version but never "USB" or "Serials", serial appears only if I don't plug the cable.
Load it into Bootloader Mode, then connect the USB cable - and see if the 'Serial' changes to 'USB'. If it doesn't, then you have a hardware problem (phone or cable or computer).
I think it's a Phone probleme.
Cause I've a Samsung wave and I havn't any problem with the same cable and the same computer.
Also I can't flash my HD²...
Sph1nxXx said:
I think it's a Phone probleme.
Cause I've a Samsung wave and I havn't any problem with the same cable and the same computer.
Also I can't flash my HD²...
Click to expand...
Click to collapse
got another pc to try? what windows you using? stock usb cable? tried all your different usb ports? remembering to right click and "run as administrator"? no usb hub? if its 64bit windows, definately try a different pc.
samsamuel said:
got another pc to try? what windows you using? stock usb cable? tried all your different usb ports? remembering to right click and "run as administrator"? no usb hub? if its 64bit windows, definately try a different pc.
Click to expand...
Click to collapse
I've already Try on another computer.
I've try with my seven OS, and with XP OS.
The problem is the same.
But when I plug the USB cable, the computer says "unknown Device" and it's the same on different computer with different cable...
I think my HD2 mother card is probably broke for this.
For some reason, whenever I plug my X10a into my computer, I get "USB Device Not Recognized", and the phone doesn't charge and I can't mount SD Card or use ADB...
It still charges through the wall socket though.
Anyone know what the problem is?
chris_knows said:
Anyone know what the problem is?
Click to expand...
Click to collapse
Your computer or SD. Uninstall any SE drivers with USBDeview and reconnect which should install new drivers and hopefully sort it out.
Thanks for the suggestion, but it didn't work...I tried connecting to another computer too, and nothing happened. So my only option now is to get a new SD card?
Hi, I am experiencing the same thing and this happened after that I first rooted my phone using superoneclick and then replaced my fonts with arabic fonts.
I hope someone can find the root cause for this error.
chris_knows said:
For some reason, whenever I plug my X10a into my computer, I get "USB Device Not Recognized", and the phone doesn't charge and I can't mount SD Card or use ADB...
It still charges through the wall socket though.
Anyone know what the problem is?
Click to expand...
Click to collapse
I've had off and on problems in this area. Searched around and found this thread.
[GUIDE] ADB, Fastboot, and Nandroid for Noobs
This is what he suggests to solve problems with ADB and USB, (below is ALL the work of the Guide author):
"Im not getting a notification of Android ADB when i plug in my USB"
Why: Your computer has detected your phone but as a protable device and as a storage device.
Fix: This took me a lot of research and time to figure out so this is what your are going to do.
First download USBDeview - Here
Unzip it
Run USBDeview.exe as Administrator
You will see all drivers being used on your computer
Highlight and Uninstall all drivers with the description have HTC Android (Should be 3 of them)
Right Click on the driver and press uninstall
Once done, Unplug your phone and plug it back in
You should now get the notification of the ADB device
Plug in your phone through USB and DO NOT MOUNT IT!!!!!
Your computer should see a new device and try to install Android 1.0 driver (If it doesnt, scroll down to the "Im not getting a notification of Android ADB when i plug in my USB" section)
Let it load
Once it cant find them select "Install drivers from my pc"
The drivers you need are in the Android SDK 1.5r2 folder (C:\android-sdk-windows\usb_driver)
Depending on your OS pick x86 or amd64
You ADB Android Device should now be installed! Good Job
chris_knows said:
Thanks for the suggestion, but it didn't work...I tried connecting to another computer too, and nothing happened. So my only option now is to get a new SD card?
Click to expand...
Click to collapse
Had the same issue my friend. it's the USB socket within the phone that is gubbed. I spent days searching for a solution to no avail.
Why don't you install PC Companion? You can download it from SE. Once you've finished installation, connect your phone and let it detect your phone.
After that, you can uninstall PC Companion. The purpose is to let PC Companion installs all X10 drivers.
Hi guys,
Well it's not the socket because I can charge it normally with wall charger. Regarding the drivers, of course I have tried with PCcompanion and it didn't work.
Thanks...
well i think it can be the socket, becouse, wall charger only uses two wires of the five the socket has, so may be data+ or data- wire is broken. Have you tried with different usb cable?
As the mobile usb socket only has TWO solder points and it is very small socket and the position is not the best, may be some of the five lanes of the socket have unsoldered...and this is why it charges but it cant connect to computer.
It is only an idea..i hope the cause is some driver, mobile configuration (have you tried to reset your phone? ) or the USB cable.
after changing 3 cables I got it to work...
Thank you for your support.
USBDeview is giving me a virus, the .exe is the problem
x10user2011 said:
USBDeview is giving me a virus, the .exe is the problem
Click to expand...
Click to collapse
nvm i downloaded the file from nirosoft.com instead and it works fine.
USB Controllers
Usually if it works on another computer, but not your own, it is because your USB Controllers are messed up. In Device Manager go to Universal Serial Bus Controllers -> right click each one and say Uninstall(your USB mouse/other peripherals will stop working so be warned) -> restart your computer and let it install all the drivers again. Should be working now.
I'm on v2.3 and taking out the battery and SD card and re-inserting it solved the problem for me.
Saz
***
I'm still having this issue. 3 cables 3 computers I think its my port. Charges fine when I plug it into wall or computer.
Just nothing for data its like nothing is happening.
Sent from my X10i using XDA App
Yeah, so i've read plenty of topics about USB problems, but none gave me the
anserw.
I'm running Villain ROM 3.0. I just cant connect my phone to the computer (Mac).
It work well before also after flashing Villain.
What i tried:
1. connecting my phone without usb debuging ->phone gives the sound and report in the notification bar : "MTP - initializing" then "USB Connected, MTP-connected" But it does not gives a connection with my mac.
2. Connecting my phone with usb debuging ->phone gives the sound, but nothing happens. nothing in the notification bar neither on the computer. It's strange becouse before it was making the same sound and giving me the info in the notification to connect.
3. I've also tried KIES air it works fine. i can see my phone content, but when im trying to send one file (130mb) there is no reaction to this.
Also some time ago i was able to get usb working by simply choosing usb debuging and restarting phone.
But now i have no acces to my storage
Please help
I have a similar problem.
When I connect my SGSII to my PC (with USB Debugging On) I see 2 Removable Drives in Windows' Explorer. If I click on either one I get the "Please Insert Disk". If I connect to the same USB with USB Debugging off, then Kies Starts but does not connect.
Now the weird bit, if I do the same thing in the next USB port, then everything works fine.
Going back to the first USB slot then the problem reappears.
The 2 USB slots are next to each other and go back to the same controller on the motherboard. I have removed Kies and reinstalled Kies. I have uninstalled all the drivers. I have even changed the USB cable. When I plug a USB External Hard Drive into either USB, it works fine.
Maybe the phone just likes the one connection per computer. I'll have to test that out in my work's PC.
Update:
managed to get a microUSB cable and tested it on my work's PC. Exact same situation. Both PCs run Windows XPpro.
Has anyone else noticed this?
Now, when you said that, i checked with my second usb por, and everything works fine .
So thanks for your help. One working with sgs2 usb port is enought for me
I use my device daily and there is no such big issue but when i used to change the rom, my otg didn't respond when my device is booted and in the recovery section it shows perfectly.
And after connecting to computer it starts connecting and disconnecting.
When i used switch the usb cabel then it starts behave normally.
The same situation happens with my pd but it only shows in the recovery.
I think my otg output is not good?
If anyone facing the same issue please help me too if u having any solution.