Hi, unfortunately I broke the mini-USB connector soldered on my qtek 9100. now I know how to load the battery or rather I ordered a battery charger from China but I will come no earlier than 20 days. Now while I unsoldered a 5-pin connector of an old camera and I paid the phone. The problem is still not working. my question is:
it takes a mini USB 5 pin connector for my particular phone or go well all those who are around?
Thanks and I hope I was clear!
I solved all the mini USB port I had a tiny piece of tin made contact, I removed it and now everything works perfectly!
It is good to hear your success story. My brother has an old Cingular wizard with a broken USB connector. He dropped the phone while it was plugged in. I will visit him next week, and will try to repeat your success.
He still has a stock Cingular ROM, and has never had a data plan.
He uses it as a PDA that happens to also be a phone.
Related
Hi,
I have a wired GPS solution named Kirrio which has been working fine with my old XDA II.
Ive just recently bought an MDA III (XDA IIs) and was expecting it to be an easy swap.
However it seems that although the connector in the bottom of the PDA looks the same between the two, it has changed.
When I connect the wired GPS cable (which also includes power for the PDA) nothing happens.. the power led doesnt light yellow as is custom on the PDA when its charging, and the GPS doesnt work.
Ive noticed that the MDAIII connector seems to have a small spring thingy in the front of it which match with a slot carved out in the plugs. This is different to the XDA II... but Im not sure if the spring thingy is a small switch or something... and if the wiring is totally different between the two.
Kirrio cant help me.
Anyone have some ideas?
I am using my original Destinator (Leadtek) wired GPS that I got for the XDA, used it on XDAII with no problems and have been using it since last October with no problems on my MDAIII (XDAIIs)
check this
http://www.mobile-review.com/pda/review/htc-blue-angel-en.shtml
Reset key, cradle and cable connector is placed on the low part of the device. The connector is differed from the old device, it means that old cables and cradles can not be used with the new smartphone.
My MDA does not charge anymore. Nothing wrong with the battery, I put battery in my 8125, it works fine. When I put the USB connector to USB port and shake little bit sometime it charges. I guess the USB connector form MDA was loose and failed. How to fix it. I can USB connector from here http://www.modaco.com/index.php?showtopic=254157 but what part number I don't know and how to install it properly (I have the repair service manual and I already disassembly my MDA with no problem at all). The part cost about $3.00 and I am very handy with electronic components soldering but I want to be sure. I have a quote from couple places they charge about $69.00 plus shipping. It is too much. Anybody can help me. Thanks
I have a problem with my C550, I hope someone can help me:
A carcharger won't charge my phone. It senses the cable (screen goes from black to lit) but it won't charge. I use a motorola USB-charger, which worked on my SPV-M600.
I have the same problem with my PPC Techs Lil Sync USB AA Battery Adaptor I use on my bike.
The phone also won't charge on a PC without the proper software (active-sync?) installed.
I suspect it to be a software-issue in WM2003SE, maybe a registry-setting?
I have considered an update to WM6, but in that case I would like to backup the original rom that the phone now has, so I can revert to it. Can someone give me a link to a howto, or explain how to do this?
charger from motorola doesn't work with c550. i bought motorola charger to and it doesn't work.
I found an interesting message on spv-developers. The only thing then is how to do this. Pin 4 is not connected, so you can't connect line 4 and line 5 by cutting the cable and joining the two lines. Buying the C500/C550 car charger solves my problem partly because my lil sync remains....
I have solved the problem. I have bent pin 4 on my phone so it connects to the outer shell of the mini-usb-port (=ground). Now it charges off everything I feed to it.
hanz71 said:
I have solved the problem. I have bent pin 4 on my phone so it connects to the outer shell of the mini-usb-port (=ground). Now it charges off everything I feed to it.
Click to expand...
Click to collapse
Hi,
is that pin 4 as in the official pin 4 from the mini-usb pinouts so thats the far right if looking at the mini usb port with the phone facing down?
or do you just mean pin 4 counting from the left?
Hey guys, i am hoping i missed something really stupid.
But i just bought a few accessories for my TP2.
I bought an extra charger, and an extra USB connection for my Cradle, and an official HTC car charger
All marked as being for the TP2
But they have a standard Mini-USB connection on them, not the wierd little cut off corner connection that is on the underside of my TP2
wht the hell have i forgotten?
is there an adapter i need to buy or summin?
I am thoroughly confused
Thanks for any help
TM411
No they will work fine, for Data and Power transfer normasl mini-usb cables work fine, you only need the EXT-USB connector (the cut off one) for video and sound transfer (headphones etc.)
Excellent,
Thankyou very much
It' s kind of strange, isn't it. But all mini usb connectors will fit.
Hi all, I bought my S3 9 months ago. First 4-5 months, everything was okey. Then I started using Custom Roms and unfortunately usual charging problem started to occur. I changed my cable first and for 2 week new cable worked. Then it started not charging too. I bought a new one. That worked for 2 weeks too. Then a new one... I'm fed up with this. I don't wanna pay any more for charger so what's the solution? I resetted rom counter and returned back to stock rom but no it didn't work. So if you can help me in a way, I'll appreciate it. Thanks
do you charge the GS3 from an USB port or from the power supply (travel charger)?
i have a few ideas, so you can try if you want.
1.- If charging from USB port of PC, make sure if this port dont have a short circuit or is damaged, USB ports from PC's can damage devices in some cases.
2.- if charging from the travel charger, (that thing like an ice cube) ... switch the charger with a friend who also have an gs3 and try for a few days to see if the charger is the problem or not.
3.- Do you warranty valid , could be problem of the micro usb port in the device.
Hope i have helped a little.:fingers-crossed: good luck!
I'd say most likely reason for the problem is your phone USB connector. It could be a bit worn and new cable works for two weeks until the cable plug wears itself out too. Having the combination charge won't work.
While your phone is un rooted, return it for warranty.