Here's the tether that T-Mobile removed from the Galaxy. Just flash using Clockwork recovery.
I tried and its working great. Once it's installed, you turn it on in Menu>Settings>Wireless Settings>Mobile AP. It's working flawlessly on 3G.
http://www.talkandroid.com/download/signed-mobileapv2.zip
Sent from my SGH-T959 using XDA App
I loaded this today too and it works wonderfully. Should have been there in the first place.
Works perfectly. And the great thing I can tether other android phones with it so I'm assuming it's not creating a adhoc connection. Speeds seem to be a little better than wireless-tether app.
My iPad and anyother phone is able to disconnect and reconnect with out any problem. With wireless tether every time I'd disconnect or stop tethering and try to start again at a later time I'd have to change the name (ssid)
Thanks for posting it!!!
Works very well! Thanks a lot
Sent from my Vibrant
I tried to download the wireless teather and it said it's not corrupt. Can you re post the link?
nice find, thank you very much.
is clockwork necessary to flash this/stock recovery won't work?
stock recovery didnt work for me. but by rebooting with clockwork it did. this is an awesome thing.
Is there any difference between this and http://forum.xda-developers.com/showthread.php?t=756804 ?
....Holy Cow! I did it!!!
I'm a rooted noob (Yep.. A Roob.)and this my first actual use of the root. It Worked! WooHoo! Thank you. You guys rock!
hellcatrydr said:
Would someone please give me step by step directions on the above.
I've read & searched & read some more. I'm a Vibrant rooted noob (Yep.. A Vroob.) and I have the Clockwork Recovery tool but I'm still not quite ready to start clicking things I don't really understand yet. I D/L'ed the tether zip. Lil' help? Thanks guys.
Click to expand...
Click to collapse
Make sure you have ROM manager, if not, it can be found in the market by searching for it.
Go into ROM Manager
If you don't already have it flashed, click "Flash ClockworkMod Recovery"
After that, click "Reboot into Recovery."
Phone will go into ClockworkMod
Use your volume buttons to go to "install zip from sdcard", and press the power button to select.
Select "choose zip from sdcard"
Go to whatever folder or location the file is, and select it
Click on "Yes - Install signed-mobileapv2.zip"
After that happens, click go back, then reboot system now, and that's it!
Works great on my Vibrant. Thanks so much!!!
worked great!
I tried this six times I download it to sd card then do clock work recovery but I cant find the file I even tried moving it still no luck
-------------------------------------
Sent via the XDA Tapatalk App
dbm0361 said:
I tried this six times I download it to sd card then do clock work recovery but I cant find the file I even tried moving it still no luck
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Make sure you have it on the phones memory, not on an external SD card.
Sent from my Vibrant
it worked great thanks
Does this work on the stock rom
Sent from my SGH-T959 using XDA App
Works perfectly on my stock rom.. The first time it rebooted, it hung on the Galaxy S screen, but a battery pull solved it.
Sent from my SGH-T959 using XDA App
Writing this reply now using wireless tether. SWEEEEET! Our comcast connection drops from time to time so this would be extremely helpful.
Thanks a million.
Great. Thanks! Works wonderfully
Sent from my SGH-T959 using XDA App
Related
Ok im coming from an iphone which had them for years. Always had them jail broke & knew my way around them pretty well. Im def enjoying my Vibrant but its like learning to riding a bike all over again lol
I just cant flash any roms what soever. Ive tried quite a few from this site & they just wont install on my phone.
Running 2.2/rooted w/ super one click. I mount the phone, copy rom to sd card. Once I boot into recovery & select the zip file I want to flash, I either get file not found or it will it actually start to install for a moment & then just stop & it puts me back to the recovery menu.
I've searched all over & have tried numerous things but no good results. Any help I would def appreciate it thnx.
Sent from my SGH-T959 using XDA App
Do you have clockworkmod recovery installed?
Sent from my SGH-T959 using XDA App
johnny13oi said:
Do you have clockworkmod recovery installed?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Yes, I do, still no luck.
Sent from my SGH-T959 using XDA App
If you are on a pc, click the noob guide link in my signature and follow the steps for the alt method.
Once you have that and followed all steps, grab the rom you want and flash it.
I blame the 2.2 mini kies update for a lot of issues.
doin-it said:
Ok im coming from an iphone which had them for years. Always had them jail broke & knew my way around them pretty well. Im def enjoying my Vibrant but its like learning to riding a bike all over again lol
I just cant flash any roms what soever. Ive tried quite a few from this site & they just wont install on my phone.
Running 2.2/rooted w/ super one click. I mount the phone, copy rom to sd card. Once I boot into recovery & select the zip file I want to flash, I either get file not found or it will it actually start to install for a moment & then just stop & it puts me back to the recovery menu.
I've searched all over & have tried numerous things but no good results. Any help I would def appreciate it thnx.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
have you triede the toolbox
http://forum.xda-developers.com/showthread.php?t=954509
so i just rooted/flashed my phone with das bamf,
as ive been reading and watching videos people have been flashing the rom before the radio..
so i flashed the rom and was going to reboot with my adb so i could flash the new radio.. but whenever i flashed the rom it rebooted automatically before i could type the reboot command.. so i thought ok this would be fine and i would just do it when the phone rebooted itself..
so when the phone came up i tried to mount as a disk drive and my computer doesnt see the sd card or the phone and my adb doesnt see the phone online either.. so i cant reboot it to flash the radio i need, i still have the stock radio on here so i dont have any service right now..
so i either need to know how to make the adb recongnize my phone.. or i need to know if their is a way to reboot into the bootloader so i can flash the radio.. its already on my sd card and everything. thanks!
Hold volume down while pressing power will get you
to the boot loader.
Thank you so much man, i just did it and flashed my radio and now everything is working and im becoming in love with this rom!
Willis_G said:
Thank you so much man, i just did it and flashed my radio and now everything is working and im becoming in love with this rom!
Click to expand...
Click to collapse
Dont forget to delete or rename that radio file.
sent from my BAMF'n thunderbolt.
RootandBoot said:
Dont forget to delete or rename that radio file.
sent from my BAMF'n thunderbolt.
Click to expand...
Click to collapse
I didnt man i guess i have another question.. as i previously stated that since i cant get my phone to interact with my computer after flashing this rom..
Is their a special setting that i have to toggle? or something? because i would really like to be able to transfer files again.. even with the disk drive option checked it still does nothing.. it does charge though but it wont come up in windows explorer
Select internet pass through, then give it 15-20secs. Then change to sdcard. That is a little trick they mentioned in one of the threads.
Sent from my ADR6400L using XDA App
trott33 said:
Select internet pass through, then give it 15-20secs. Then change to sdcard. That is a little trick they mentioned in one of the threads.
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Thank you man!
Ok guys I have a Sensation and I thought I'd guinea pig my WiFi Flyer to see if the permroot method from it works, and it does!
So I will copy from this thread!
Step 3. TO permanently root your Sensation - THIS WILL NOT AFFECT WIFI
1. Copy su-2.3.6.3-ef-signed.zip to your sdcard root DOWNLOAD HERE:
2. Start clockworkmod recovery (instructions below)
3. BACKUP YOUR ROM USING CWM BEFORE ATTEMPTING ROOT!
4. Press Volume Down, Select "Backup & Restore" then select "Backup"
3. Select "install zip from sdcard" after backing up
4. Then select "Choose zip from sdcard"
5. Then select "su-2.3.6.3-efgh-signed.zip"
6. Then select "Yes - install su-2.3.6.3-efgh-signed.zip" to confirm
7. Then go back
8. Then reboot.
9. You're rooted!
EDIT: If you get stuck and the device will not reboot hold Power/Hold+Volume Down for a while and the device will restart!
After this the device rebooted, and I was able to obtain SU in terminal and also use root explorer to mount R/W!
So big ups to ikhzter for the guide!
Hope this helps you guys out!
Also I will say I used this only on a WiFi Only US Flyer and cannot guarantee this will work on your Flyer/View! Again this is for S-Off devices only!
EDIT: People have reported this working on the View 4G and Flyer GSM
Also if you did not get the ClockworkMOD installed after AlphaRev check here for directions on how to obtain CWM!
Worked thanks
Great!
Great glad to hear, if anyone tries this on a View or GSM Flyer (if you can) could you report back so I can update the OP
It worked on my View.
Out of curiousity how did you get clockworkmod?
Sent from my PG41200 using XDA Premium App
worked easy as pie! thanks!
StormMcCloud said:
Out of curiousity how did you get clockworkmod?
Sent from my PG41200 using XDA Premium App
Click to expand...
Click to collapse
It's in the thread "its here! S-off something. " It asks is you want to flash cwm after the root script runs.
regards,
Ernie.
StormMcCloud said:
Out of curiousity how did you get clockworkmod?
Sent from my PG41200 using XDA Premium App
Click to expand...
Click to collapse
You can install CWM when you make your device S-OFF, at the last step you are asked if you want to download and install it.
Worked nice on my Flyer.
You can also do it this way: http://forum.xda-developers.com/showthread.php?p=14693680
superdino said:
You can install CWM when you make your device S-OFF, at the last step you are asked if you want to download and install it.
Worked nice on my Flyer.
Click to expand...
Click to collapse
**** I'm sorry I thought I edited before your response! No its in the other thread!
Edit. Oops sorry, I quoted the wrong person.
regards,
Ernie.
I believe that the instructions to do this are in the faq on the http://revolutionary.io site ... you should be reading this before s-off'ing in the first place... hense already know this
Kris
Help, I just ran s-off for my wifes view and clockwork mod will not reststart the device. I tried power down and restart but nothing will work. I am now stuck at android box open with arrow and nothing will get it to move. Can't find a place to pull bat. Is this even possible?
Sent from my PG86100 using XDA Premium App
CrippleB said:
Help, I just ran s-off for my wifes view and clockwork mod will not reststart the device. I tried power down and restart but nothing will work. I am now stuck at android box open with arrow and nothing will get it to move. Can't find a place to pull bat. Is this even possible?
Sent from my PG86100 using XDA Premium App
Click to expand...
Click to collapse
press and hold the power button (for a long time) until it powers off, then power it back on
glitzbd said:
Ok guys I have a Sensation and I thought I'd guinea pig my WiFi Flyer to see if the permroot method from it works, and it does!
So I will copy from this thread!
Step 3. TO permanently root your Sensation - THIS WILL NOT AFFECT WIFI
1. Copy su-2.3.6.3-ef-signed.zip to your sdcard root DOWNLOAD HERE:
2. Start clockworkmod recovery (instructions below)
3. BACKUP YOUR ROM USING CWM BEFORE ATTEMPTING ROOT!
4. Press Volume Down, Select "Backup & Restore" then select "Backup"
3. Select "install zip from sdcard" after backing up
4. Then select "Choose zip from sdcard"
5. Then select "su-2.3.6.3-efgh-signed.zip"
6. Then select "Yes - install su-2.3.6.3-efgh-signed.zip" to confirm
7. Then go back
8. Then reboot.
9. You're rooted!
After this the device rebooted, and I was able to obtain SU in terminal and also use root explorer to mount R/W!
So big ups to ikhzter for the guide!
Hope this helps you guys out!
Also I will say I used this only on a WiFi Only US Flyer and cannot guarantee this will work on your Flyer/View! Again this is for S-Off devices only!
Click to expand...
Click to collapse
I have the 3g unit and I followed the steps to s-off (another thread) and I also did the steps above for prem root, it worked
alwayslearning said:
press and hold the power button (for a long time) until it powers off, then power it back on
Click to expand...
Click to collapse
Holy crap that was scary. Thank you so much. My wife is against root and if could not get it going. Why would that happen is there a problem with cwm? I am wary of using it cause had other problems in the past.
Sent from my PG86100 using XDA Premium App
superdino said:
You can install CWM when you make your device S-OFF, at the last step you are asked if you want to download and install it.
Worked nice on my Flyer.
You can also do it this way: http://forum.xda-developers.com/showthread.php?p=14693680
Click to expand...
Click to collapse
Thanks man, revolutionary never offered to let me do that. It gave me s-off then when it went to reboot fastboot the second time it hung and gave me lemonaid.
And the link you sent worked. Thanks again!
Sent from my PG41200 using XDA Premium App
As far as I can tell it didn't give the option to anybody that I know of with a View. I had to go to the thread and do it but it was easy to do.
ElAguila said:
As far as I can tell it didn't give the option to anybody that I know of with a View. I had to go to the thread and do it but it was easy to do.
Click to expand...
Click to collapse
It gave me cwm on my view in revolutionary. But after getting into clockwork it froze and had to hold power to shut off. After reboot cwm made nand successfully. That is as far as I can go until I convince my wife there is a better rom.
Sent from my PG86100 using XDA Premium App
Shoots that theory down. I know why it didn't install on mine. I was one of the ones where it said it failed but when I rebooted I actually had s-off after all.
ElAguila said:
Shoots that theory down. I know why it didn't install on mine. I was one of the ones where it said it failed but when I rebooted I actually had s-off after all.
Click to expand...
Click to collapse
Mine did the same thing. I just followed the link that superdino posted and it worked great.
Sent from my PG41200 using XDA Premium App
ElAguila said:
Shoots that theory down. I know why it didn't install on mine. I was one of the ones where it said it failed but when I rebooted I actually had s-off after all.
Click to expand...
Click to collapse
I screwed up my Evo 3D root(well not entirely). After I got s-off on 3D I was so excited I unplugged before I ran CWM install. So when I realized the stock recovery would not flash anything even with s-off I went to run revolutionary again only to get "Your device is not supported at this time" Thankfully I was able to flash TWRP using fastboot with their instuctions. My 3d is really the only new device I can play with. My wife does not know her view is rooted.Oops
I have a ATT sgh-1717 samsung note with Android 4.0 on it. I tried to root it this morning using Odin3 and pda.tar. It passed but I am unable to put on the next file Superuser 3.0.7-efghi-signed.zip. It just goes to a black screen with samsung logo. If I hold down the volume up and down at the same time as the power button I am able to go into Clockwork mode. I can not reboot my phone. What can I do at this point? Is there a way to copy the zip file to the sd card on my phone? Any suggestion is greatly appreciated! I have been reading all day and am quite frustrated at this point. Of course my schedule is on my phone....Thank you so much.
deb410s said:
I have a ATT sgh-1717 samsung note with Android 4.0 on it. I tried to root it this morning using Odin3 and pda.tar. It passed but I am unable to put on the next file Superuser 3.0.7-efghi-signed.zip. It just goes to a black screen with samsung logo. If I hold down the volume up and down at the same time as the power button I am able to go into Clockwork mode. I can not reboot my phone. What can I do at this point? Is there a way to copy the zip file to the sd card on my phone? Any suggestion is greatly appreciated! I have been reading all day and am quite frustrated at this point. Of course my schedule is on my phone....Thank you so much.
Click to expand...
Click to collapse
Put it on Download mode and go back to stock and try again. and Superuser can be install from the PlayStore
Take the sd card out and put it in a pc and copy the file to the sd card.
rangercaptain said:
Take the sd card out and put it in a pc and copy the file to the sd card.
Click to expand...
Click to collapse
That is a great idea, but it is a mini sd...
How do I do that?
Ltilt2 said:
Put it on Download mode and go back to stock and try again. and Superuser can be install from the PlayStore
Click to expand...
Click to collapse
How do I do that? Where do I find stock? I had Superuser on my phone before I upgraded to 4.0 but I think it wiped out all my apps..
Please help I am lost.
deb410s said:
That is a great idea, but it is a mini sd...
Click to expand...
Click to collapse
No adaptor?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Bubbajoe40356 said:
No adaptor?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
No adaptor.. Starting to get really freaked out...
deb410s said:
No adaptor.. Starting to get really freaked out...
Click to expand...
Click to collapse
You can easily get one I'm sure. Slow down.
Get an adaptor and go from there.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Looks like he doesnt know what he is doing?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Ltilt2 said:
Looks like he doesnt know what he is doing?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
You. are right! I don't understand. I followed a guide and got stuck, now I am trying to get some help. I just wan to get my phone up and running. Please point me in the right direction.
I found the easiest way for me was to download custom Rom to sd.move it to external.odin cwm then flash twrp.reboot to recovery n wipe all caches.system.internal.not external.then install ur custom Rom.reboot system n let Rom settle.most roms already have the rooted files.if ur planning to stay stock.there's plenty of present roms for that.n make sure all the devs get their thx :thumbup:
Sent from my SGH-i717 using xda app-developers app
Went back to stock and all is well...Thanks for the help!
I will try to keep this short and sweet, but it is what it is. Please don't let this be the end of my phone!! so i had my vibrant rooted and running a cm. 10 rom. i was an idiot and when it randomly flipped into recovery mode and wouldn't do anything else i panicked. I immediately factory reset which wasn't bad but when the problem wasn't solved instead of reinstalling the zip, (I wasn't thinking about it at the time) I figured using odin I would reinstall éclair. now my phone is in boot loop and will only pull up the boot menu if the sd card is in. another symptom is that when i use odin to install éclair everything in the process works as it should up until it gets to the reset then the phone says cannot wipe data... phone reboot then it shows that it is charging and when i unplug it and try to power it up i still get boot loop if anyone knows the solution to this I would greatly appreciate it and any other ideas I could try to bring this baby back to life. ANY SUGGESTIONS AT ALL ARE GREATLY APPRECIATED
Perhaps you are not using Odin properly? You're using the file called pda .tar and the .pit file? And be sure to uncheck the repartition toggle.
Sent from my SGH-T959 using xda app-developers app
Try using the AIO to get the proper files and such to restore to stock
I am the Potati King!
Ace42 said:
Perhaps you are not using Odin properly? You're using the file called pda .tar and the .pit file? And be sure to uncheck the repartition toggle.
Sent from my SGH-T959 using xda app-developers app[/QUOTE
I assume that I am doing it right... from what I have researched it is correct. I have double checked to make sure that the tar goes into the pda and that the pit has pit. but the reparition toggle may be something I over looked. I just downloaded the pit and tar files online would there be anyway that those could be the wrong file or I have to use a proper combination of two files? do you suggest downloading those files from a certain site? Once again thanks a bunch for your comment!
Click to expand...
Click to collapse
Cooptx said:
Try using the AIO to get the proper files and such to restore to stock
I am the Potati King!
Click to expand...
Click to collapse
im not exactly sure where or what the AIO is. can you send a link or fill me in? Thanks again!
kelton money master said:
im not exactly sure where or what the AIO is. can you send a link or fill me in? Thanks again!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=954509
Sent from my SGH-T959 using xda app-developers app
Ace42 said:
http://forum.xda-developers.com/showthread.php?t=954509
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
I could not figure that program out to save my life the comments made me believe that its an app for the phone itself. but my phone doesn't boot up.
im kinda thinking that the problem is actually when the phone says cant wipe data. because then the loading bar stops and it boots straight from there. What would keep the phone from not being able to wipe the data?
Use that aio program. Put the phone into download mode start phone while holding volume up and power. Then use the aio oden. It cones with the correct files.
Sent from my SGH-T959 using xda premium
kelton money master said:
im kinda thinking that the problem is actually when the phone says cant wipe data. because then the loading bar stops and it boots straight from there. What would keep the phone from not being able to wipe the data?
Click to expand...
Click to collapse
A corrupted internal SD card most likely , have you been on an ICS ROM lately? Try to Odin Eugene's Froyo that does not brick, if this works then you most likely got hit by the EU bug. If this is the case you will have to do the external SD card work around.
Sent from my SGH-T959 using Tapatalk 2
kelton money master said:
I could not figure that program out to save my life the comments made me believe that its an app for the phone itself. but my phone doesn't boot up.
Click to expand...
Click to collapse
The program is an installable computer program. A working download link can be found in one of the sticky threads
I am the Potati King!
iTz KeeFy said:
A corrupted internal SD card most likely , have you been on an ICS ROM lately? Try to Odin Eugene's Froyo that does not brick, if this works then you most likely got hit by the EU bug. If this is the case you will have to do the external SD card work around.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
YES I was on ics passion for quite some time. Then I went to ics slim then I went all the way to cm 10 jelly bean. would you mind sending me a link or the files for that froyo? also if my phone does have a dead internal, will that effect how the phone runs (using the external?) and is there a way to recover it the dead one? sorry lots of questions! thank you for your comment!
becalmotonkr
scottcom said:
Use that aio program. Put the phone into download mode start phone while holding volume up and power. Then use the aio oden. It cones with the correct files.
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
alright i will give it a shot. can you tell me how to use the AIO program?????? the comment has the link i just don't know what the heck it means or how it works. PM me? or comment or email whatever works best. Thank you!!!!!!!!!
iTz KeeFy said:
A corrupted internal SD card most likely , have you been on an ICS ROM lately? Try to Odin Eugene's Froyo that does not brick, if this works then you most likely got hit by the EU bug. If this is the case you will have to do the external SD card work around.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
maybe this will tell you more if my phone has a dead internal sd card. I just barley noticed this but the phone actually doesn't bootloop unless the external sd card is in. if the external is in the phone shows the Samsung vibrant logo and then it turns off. if you hit power it will try to boot again.
kelton money master said:
alright i will give it a shot. can you tell me how to use the AIO program?????? the comment has the link i just don't know what the heck it means or how it works. PM me? or comment or email whatever works best. Thank you!!!!!!!!!
Click to expand...
Click to collapse
Download the program from http://d-h.st/kWH and install it on your computer by double clicking the .msi file
Go through the install
Open the program
Click the "Flash to Stock" option
Click Reboot into Download + Start ODIN
Take out your phone battery and replace it without turning on your device
Plug your phone into your computer WHILE holding BOTH volume keys
Follow the instructions below the "Reboot into Download + Start ODIN" button
unsuccesful
Cooptx said:
Download the program from http://d-h.st/kWH and install it on your computer by double clicking the .msi file
Go through the install
Open the program
Click the "Flash to Stock" option
Click Reboot into Download + Start ODIN
Take out your phone battery and replace it without turning on your device
Plug your phone into your computer WHILE holding BOTH volume keys
Follow the instructions below the "Reboot into Download + Start ODIN" button
Click to expand...
Click to collapse
didn't work does that mean that the internal sd is dead?
Try hemindall there is a something about it here http://forum.xda-developers.com/showthread.php?t=1875966 download hemindall file and the flash able hemindall file u can find them in the top of the tread of the link above
And follow the instructions also found in that thread
Sent from my SGH-T959 using xda app-developers app
kelton money master said:
didn't work does that mean that the internal sd is dead?
Click to expand...
Click to collapse
Not necessarily but it is looking that way. If what Apples723 suggested doesn't work then try to Odin Eugene's Froyo and see if that will boot up. It can be found in the thread he linked but here it is again http://forum.xda-developers.com/showthread.php?t=1875966.
Sent from my SGH-T959 using Tapatalk 2
apples723 said:
Try hemindall there is a something about it here http://forum.xda-developers.com/showthread.php?t=1875966 download hemindall file and the flash able hemindall file u can find them in the top of the tread of the link above
And follow the instructions also found in that thread
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
hemindall didn't work. I followed the instructions and the computer said it had downloaded it successfully but the phone didn't show that anything was downloaded. same symptoms. im going to try the froyo that does not brick. thank you for your inputs! if you think of anything else let me know!
kelton money master said:
hemindall didn't work. I followed the instructions and the computer said it had downloaded it successfully but the phone didn't show that anything was downloaded. same symptoms. im going to try the froyo that does not brick. thank you for your inputs! if you think of anything else let me know!
Click to expand...
Click to collapse
did you make sure that the device was detected under utilites in heimdall my computer wont even detect my phone it says usb device not reconginzed so im screwed if my devices gets bricked