Related
Hi guys,
I have a problem with my BT headset.
It's a Nokia BH-504.
When I make a call and use the headset, hanging up sometimes sends my headset into a weird state in which it no longer responds to input. I have to reset it. It does not behave this way with other phones.
It does however work beautifully when using just the media routing with it.
Is there any way in which I could prevent the phone from using the headset as a phone call audio device? I mean permanently.
I am using a non-rooted official 2.1 GSM HTC Hero.
Thanks.
ok, this has been plaguing me and preventing me from switching permanently to 2.2 since the camera has been fixed.
the problem:
you pair your bluetooth device and connect. media works fine. then disconnect and turn off bluetooth and the bt device. turn everything back on, and media won't play through the bluetooth device.
the cause:
well, i have been using the same jabra sp700 for a few years now. worked great on all my devices (iphone 2g, iphone 3g, dream, various nokias and my x10 up to 2.1). well, apparently 2.2+ android requires a bluetooth device that supports avrcp or the avrcp handling of 2.2+ roms require avrcp to work on the bluetooth device. however, my sp700 (and i would imagine other older bt devices) either do not have this or it doesn't work as android wants it to.
the solution (tested multiple times, works sometimes, not others):
pair and connect, go into settings and disable "phone audio" for the bluetooth device.
kind of sucks since this is my car speaker phone, but i use it for media more than i use it for phone. but i have connected/disconnected several times and media is still playing through the bt and not the phone speaker.
so those who have bt media problems with 2.2+ roms, try this, it may work for you.
will this fix the problem? http://www.foogod.com/android/ ?
it is the same with MW600 headset on Wolfbreak's CM 6.1.3 0.54 ROM.
what happens for me:
both devices were paired in the past and remember each other. I turn on BT on the phone and power on the headset. press play in the music player - nothing plays, it hangs and come back to paused state.
when I press play for second time music comes from headphone speaker.
what helps:
stop the playback at this point. turn the headset off and on again. press play and the music should play through it. with both music headset and phone audio profiles active.
this is how I have to do it every single time. headset works normaly afterwards until you turn the BT off on the phone again. it's just a little inconvenience.
what troubles me more are the short gaps in the playback you get about every minute and when you turn the screen off.
krobar77 said:
will this fix the problem? http://www.foogod.com/android/ ?
Click to expand...
Click to collapse
i'll try it today.
krobar77 said:
will this fix the problem? http://www.foogod.com/android/ ?
Click to expand...
Click to collapse
does not work
what about the method I wrote about? I think it is the same problem.
power off/on your headset again when the music starts playing from the headphone speaker used normally for calls. every single time this happens it fixes this for me.
dante-fu said:
what about the method I wrote about? I think it is the same problem.
power off/on your headset again when the music starts playing from the headphone speaker used normally for calls. every single time this happens it fixes this for me.
Click to expand...
Click to collapse
that was working on and off for me. sometimes it does, sometimes it doesn't.
i made some modifications to the bluetooth audio.conf, will test those on my way home tonight.
no problems here with my bluetooth and i'm using wolfbreaks' 2.2 rom. i'm using a sony dr-bt50 headphones.
I've been having this problem with my headset too (hbh is800) and I'll try once I get back from home. Hopefully it works. I've tried the foogod link before and it never helped. I've been experiencing the bluetooth problem with my watch too (mbw 150) it connects and later it disconnects. and the cycle keeps repeating.
I have the same problem with dante-fu. I use Wolfbreak's CM 6.1.3 v0.54 ROM and MW600 headset. But turn on/off headset doesn`t help me sometimes and I have to re-pair devices.
I'm too having some problems with my mw600 head set.
Sometimes it does not play through the Bluetooth headset but through the speaker of the phone (it happens rarely)
But the most annoying thing is after a call, my headset just freezes & nothing works expect for the power button. Only solution is to turn the device of & turning on it again.
Using Wolf's 2.2 CM ROM
well, this sucks, i've tried changing all the media configs and nothing.
only solution i can think of is porting the bluetooth stack from 2.1 to 2.2.
back to 2.1 since my bt speaker is the only option for music in my car since my kid decided to deposit $.42 into my cd player.
Blutooth Media streaming problem
Hello,
Has anyone had any luck resolving this issue?
It's starting to drive me crazy. Bluetooth phone calls work perfectly but media streaming works intermittently.
Is there an easy way to replace downgrade the blutooth stack?
I am running CM 6.13
My Galaxy S3 connects to my car's Bluetooth and allows me to make and receive calls. However, notification sounds are not playing via Bluetooth. It seems that the phone is sending the sounds to bluetooth but the car system doesn't play them. The result is that I have no audible indication when I receive a message when my phone is connected to my car's Bluetooth system.
Similarly, if I try to use S-Voice it would seem that the phone is expecting sound input via bluetooth and not from the phone's built in microphone, which means it does not detect any sound. Audio output also does not play on the phone or via bluetooth.
Presumably my car's bluetooth does not support receiving such sounds - only supporting basic phone functions. I cannot find any configuration settings on the car system to enable it.
Is there any way of stopping my phone trying to send notification sounds to bluetooth and to just play these via the phone's speaker but still allowing the phone to be connected to bluetooth for making and receiving calls? Similarly can I force S-Voice to use the phone's microphone and speaker if it cannot be made to work with my car's bluetooth?
S Voice on AT&T Galaxy Note Bluetooth In Car
First off, I am having the same issue, I tried even holding down talk / voice command button on steering wheel, No luck. I have a 2012 Kia Optima GLI full Nav and Voice command options. I have my Note working nicely with Team Perfection ICS R2, S Voice is fully functional except:
When using S voice in car connected to car Bluetooth (pushing search button on bottom of phone face) it tries to accept audio input from car Mic over Bluetooth, but never receives input. Can't find any setting in S voice app to change input setting from car to phone mic. Not sure why the car mic doesn't work other than just not supported by the s voice app? Anyone out there know of a fix or work around?
s voice does not work over any bluetooth
I have tried this on multiple Bluetooth devices. It does't hear anything and it responds with a very feint. Robotic distorted voice. Music plays well on Bluetooth but I have had problems with phone calls.so maybe the problem is the Bluetooth stack rather than s-voice.
I am having the same problem with SGS3. When I was testing s-voice on SGS2 you could set s-voice to use SGS speaker and mic for voice commands and notifications. Now I can't find that toggle.
BT Devices , yes....Car BT, No
It works fine on my headsets. IT doesn't work in my car.
spanout has nailed the problem. It apparently does NOT use the mic in the phone when hooked to BT. The car is not designed to pass voice to the BT. The car BTs typically have their own voice control, and as such is handling the voice itself.
When you think about it, it makes sense. Less chance for outside noise if it takes the input from the mic on your BT device, as likely the phone will not be close to your mouth.
The only way we'll get it to work is to find a way to enable the mic on the phone when on BT. Probably would need help from the DEVs here on that.
im in the same boat!
the real kicker is SIRI can send her voice over the car speakers and utilize the car mic.
so logic says, its purely a BT setting on the software ice cream and s3.
any apps for that? or any dev's want to chime in?
im using a very simple bmw bluetooth (not idrive).
it cant stream music, so i dont know how the fak siri can send her voice over it.
I have this problem with my SGS3, and had it with the SGS2 in my Ford S-Max. The problem is Ford's. Using the phone with a parrot car kit has all notifications fired over bluetooth.
georgedeaves said:
I have this problem with my SGS3, and had it with the SGS2 in my Ford S-Max. The problem is Ford's. Using the phone with a parrot car kit has all notifications fired over bluetooth.
Click to expand...
Click to collapse
same with a jabra freeway with latest v3 firmware and a galaxy s3 i9300xxblfb.
very dissapo9nted, finaly a fast, accurate voice app that understands my music requeats and i cant use it in the car!
Yakumo.unr said:
same with a jabra freeway with latest v3 firmware and a galaxy s3 i9300xxblfb.
very dissapo9nted, finaly a fast, accurate voice app that understands my music requeats and i cant use it in the car!
Click to expand...
Click to collapse
so switching the s-voice and nav to MONO works with bluetooth, but the a2dp or whatever protocol it uses normally doesnt work.
however calls are done using a2dp, so wtf?
can someone make a quick app that just forces ONLY s-voice and NAV in to mono?
the apps out there make everything go mono or nothing at all...sucks for voice call quality
I needed to revive this thread as a search for my problem led me to it.
1) Is anyone able to play a video on the S3 (GT-I9300 4.1.2) and stream the sound from the video to the car while connected via Bluetooth?
I am not.
2) S3 notification sounds do not play via the car's speakers when receiving a text message or email etc.
I can make and receive calls just fine and even play music from the S3 via BT by selecting the phone from the list of devices on the car's screen.
Blutooth / Voice App Issue - SOLVED
First of all this does work on my 2009 Highlander, but it's a bit Kuldgy.
BT Mono allows my voice app to work, but by itself it's not a solution. You have to activate it manually before using S-Voice, Google Voice or AVX. It opens the connection and has to be activated each time or it can be set to reconnect automatically…. Killing my radio.
Download the free version (I can’t access the play store to give you the link) and see if it works manually. If it works for your test then the rest should work as well.
Install Tasker:
Create a task to keep the screen from locking when your state is Bluetooth connected to the car device.
Create a Task (you don’t need it in a profile)
- Set bluetooth on (in case it’s off)
- Load BT mono (with auto on enabled in the BT mono app)
- Wait ~400MS
- Load App AVX (or S-Voice, or whatever)
- Wait 9 seconds
- Kill BT mono
- Kill BT mono root (it wasn’t always killing BT mono)
I’ve been thinking about trying to simply reboot the BT (BT off then wait then BT on) rather than kill an app.
You can add the task to your home screen as a widget…. Still not safe to do while driving.
That’s where GMD Gestures comes in. You set a swipe command, I use 2 fingers down, to launch the task.
Seems to work pretty well. I can keep my eyes on the road and still use voice commends. You do need to hang up the phone when you’re done talking, but I had to do that with Siri.
I still wish there was a force mono on all connections app, but I still haven’t seen one. AVX just added the ability to force mono for speech, it’s worked for other people, but I’m still trying to figure out why it doesn’t work for me (he's had reports that the Note 2 doesn't like his solution, Kudos to him for trying to add this).
Hope this helps
****UPDATE****
BT Mono may work for me because I'm rooted. According to the app on the store (pro version) Apparently Samsung, in an effort to prevent call recording, blocks the ability to re-route the microphone.
Hello,
I was wondering if maybe someone experiences the same or if someone has a solution for this.
When I drive I like to use TomTom Go on my phone as my main navigation, I don't like the car's navigation. I have a new Peugeot 308 SW and it has a large multimedia touch screen.
I enable bluetooth on my phone so that when I am called, the audio of the call goes through the car's audio system. This works great but because I am using bluetooth, the audio from the navigation is muted. Looks like the audio via bluetooth of TomTom Go (but also Google Maps) cannot communicate with my car's audio system. This is really annoying and the only way to get audio from TomTom Go is to disable the bluetooth and then I get audio through the phone's speaker, which is fine.
I tried an app called SoundAbout for Android and this gave me the option to route "media audio" via speaker. So I thought that I had found the solution, unfortunately it also routed phone call's audio through the speaker.
So, to summarize: does someone have an idea how I can enable bluetooth in my phone, use a navigation app (like TomTom Go) and hear the navigation's audio? I am fine if the audio is then through the phone's speaker, as long as the phone calls are through the car's audio.
Thanks for the help and Merry Christmas!
lobo81 said:
Hello,
I was wondering if maybe someone experiences the same or if someone has a solution for this.
When I drive I like to use TomTom Go on my phone as my main navigation, I don't like the car's navigation. I have a new Peugeot 308 SW and it has a large multimedia touch screen.
I enable bluetooth on my phone so that when I am called, the audio of the call goes through the car's audio system. This works great but because I am using bluetooth, the audio from the navigation is muted. Looks like the audio via bluetooth of TomTom Go (but also Google Maps) cannot communicate with my car's audio system. This is really annoying and the only way to get audio from TomTom Go is to disable the bluetooth and then I get audio through the phone's speaker, which is fine.
I tried an app called SoundAbout for Android and this gave me the option to route "media audio" via speaker. So I thought that I had found the solution, unfortunately it also routed phone call's audio through the speaker.
So, to summarize: does someone have an idea how I can enable bluetooth in my phone, use a navigation app (like TomTom Go) and hear the navigation's audio? I am fine if the audio is then through the phone's speaker, as long as the phone calls are through the car's audio.
Thanks for the help and Merry Christmas!
Click to expand...
Click to collapse
At first look in sound settings for TomTom if is not there then I remember that I have been using it the same way as you described in Waze
Send from tapatalk space
SpPes said:
At first look in sound settings for TomTom if is not there then I remember that I have been using it the same way as you described in Waze
Send from tapatalk space
Click to expand...
Click to collapse
Hi,
I've checked all the settings, in TomTom, Google Maps and Bluetooth, nothing helps.
I've been reading some stuff online and it's a very common issue. I do read that people using an iPhone don't seem to have this issue.
In Google Maps' settings I've checked that audio goes through Bluetooth, but no success. I guess it also has to do with the software in my car. My colleagues have the same problem. I guess when I use TomTom and I want to hear turn-by-turn guidance, I will need to switch off Bluetooth.
I will keep looking for a solution and will reply here when I find it. I just installed A2DP Volume Androi app but haven't test it yet. The description sounds promising, I hope this helps me.
You can try different navigators, like igo,that can use alarm volume setting instead of app volume setting, and it can be seen by Bluetooth speaker
Inviato dal mio D5803 utilizzando Tapatalk
PeppeBove said:
You can try different navigators, like igo,that can use alarm volume setting instead of app volume setting, and it can be seen by Bluetooth speaker
Inviato dal mio D5803 utilizzando Tapatalk
Click to expand...
Click to collapse
Thanks PeppeBove.
I have Google Maps, TomTom Go and Sygic, not really looking for another navigation app.
I will keep looking for a decent solution.
Thanks for your input!
What is your car audio system? If it's Sony's, you can use Songpal.
you can hear voice from phone through your car audio if you change input from radio to bluetooth.
#1 Set up can be:
CAR
Input: bluetooth
PHONE
play music by bluetooth,
use your navi, and music will automatically go quieter when navi speaks
#2 Another solution is:
PHONE
in app, in voice settings or bluetooth settings, set up "use phone speaker instead of bluetooth"
It will play navi by phone, and calls will be like always by car system.
You cannot mix inputs in car system, so radio and phone bluetooth. When you have call, your car system is changing inputs, but it take some time. So if you would like to play it like that, you will have 3 sec of every communicate cuted off. So better use, solution #1 or #2
So I have a Ford Edge with a bluetooth receiver where I can play music, as well as some headphones, and I'm having intermittent issues when using this type of playback. The issue doesn't occur with my partner's Note 5, does anybody have any issues with stereo bluetooth? I'm close to writing to LG about it so they can log with (possibly) other reports for the same issue.
groovdafied said:
So I have a Ford Edge with a bluetooth receiver where I can play music, as well as some headphones, and I'm having intermittent issues when using this type of playback. The issue doesn't occur with my partner's Note 5, does anybody have any issues with stereo bluetooth? I'm close to writing to LG about it so they can log with (possibly) other reports for the same issue.
Click to expand...
Click to collapse
Just today i had issues with mine, i have one the parrot devices on my car and it picks up my iphone right away but i tried for about 2 minutes to play music from my v10 and it wouldn't connect to it, someones it connect right away its very off and on. I didn't try to unpair it and re-pair it though.
Am I reading that right, are both BT devices trying to connect at the same time? If so I had sorta the same problem in my Audi. I sometimes had to toggle Bluetooth on and off to get it to reconnect. But what I did was go into the Bluetooth settings for each device and specifically select the profile I want to use for that device. So for Audi MMI, which handles the phone calls, I selected the profile "Call Audio" only. Then for my headphones I selected the "Media Audio" profile only. I just figured that if two BT devices are fighting for the same profile only one is going to win it. And it seemed like it was a toss up which one got the call or media profile first.
turbophreak said:
Am I reading that right, are both BT devices trying to connect at the same time? If so I had sorta the same problem in my Audi. I sometimes had to toggle Bluetooth on and off to get it to reconnect. But what I did was go into the Bluetooth settings for each device and specifically select the profile I want to use for that device. So for Audi MMI, which handles the phone calls, I selected the profile "Call Audio" only. Then for my headphones I selected the "Media Audio" profile only. I just figured that if two BT devices are fighting for the same profile only one is going to win it. And it seemed like it was a toss up which one got the call or media profile first.
Click to expand...
Click to collapse
No, you are not . However, allow me to clarify that the devices I mentioned are having issues on their own when using the V10. One incident is with my car's stereo, if I'm lucky, the audio will hold or it will decide to be a douche and start getting choppy with 1 second gaps.
Also, I'm noticing with the WiFi that my signal is horrible, but my partner's Note5 is perfect and super quick. I really really like this phone, but these issues are a bit annoying.
I have problems with my car stereo too. When I get in the car, it will connect automatically and start playing like normal but only for a minute or two. Then bluetooth will disconnect. So, I turn bluetooth off and on and, it will stay connected after that.
I also have a bose bluetooth speaker which doesnt have any problems.
I just found this thread after posting to the rom thread I am using...
I am having a minor annoyance with Bluetooth and media streaming.
When the phone auto pairs to my cars stereo head unit (Kenwood KDC-BT762HD), system sounds/calls etc come through the car fine, but not Media like music, videos etc.
Phones says it is paired to Media and the head unit does show the song info and I can control the app via hardware buttons on the unit, the phone acts as if it is playing, but no sound is heard. I have to turn bluetooth off then on or re-pair and then it works fine. I thought it was just the music app I use, but its any apps that play media like music or videos, including Pandora and Youtube.
I have 4 varying bluetooth headphones and they auto- reconnect to the phone just fine with no issues.
Anyone else having a an issue like this with any of their car stereos? My G3 never did this.
Known issue
speedingcheetah said:
I just found this thread after posting to the rom thread I am using...
I am having a minor annoyance with Bluetooth and media streaming.
When the phone auto pairs to my cars stereo head unit (Kenwood KDC-BT762HD), system sounds/calls etc come through the car fine, but not Media like music, videos etc.
Phones says it is paired to Media and the head unit does show the song info and I can control the app via hardware buttons on the unit, the phone acts as if it is playing, but no sound is heard. I have to turn bluetooth off then on or re-pair and then it works fine. I thought it was just the music app I use, but its any apps that play media like music or videos, including Pandora and Youtube.
I have 4 varying bluetooth headphones and they auto- reconnect to the phone just fine with no issues.
Anyone else having a an issue like this with any of their car stereos? My G3 never did this.
Click to expand...
Click to collapse
This is a fairly known issue to specific cars.
check here http://forums.androidcentral.com/lg-v10/664713-lg-v10-bluetooth-audio-not-working-2.html
Also, I have a gmc canyon 2015. I have the same issue. I stopped using my car's bluetooth , I now only use aux cable. Amazing in 2016 and I still have to use aux cable. I am looking to moving to one plus 3 because of this issue. marshmallow also brought gps bugs on top of the bluetooth one.
jmichaels1982 said:
This is a fairly known issue to specific cars.
check here http://forums.androidcentral.com/lg-v10/664713-lg-v10-bluetooth-audio-not-working-2.html
Also, I have a gmc canyon 2015. I have the same issue. I stopped using my car's bluetooth , I now only use aux cable. Amazing in 2016 and I still have to use aux cable. I am looking to moving to one plus 3 because of this issue. marshmallow also brought gps bugs on top of the bluetooth one.
Click to expand...
Click to collapse
I don't think its a MM issue or a vehicle specific issue (and i have an aftermarket stereo head unit) I have not had this issue with any of my other MM (or LP)devices I have tried with the radio. I have a spare LG G3 and a Moto X Pure that is running MM that is running MM and many of the mods and same apps I use on my G3 and now V10, again, no BT issues.
I am not having any disconnect or not pairing issues at all....just the odd thing that the media sounds don't work unless i disconnect/then connect the phone to the head unit when I get back into the car and power up and it auto pairs.
My folks have a much more serious issue with their 2015 Ford Escape and Ford Sync and their Samsung S4's they both have. Phone pairs and works fine once, but then the mic acts like its muted, no one can hear u, even if u un-pair the phone from the car, the phone itslef no longer outputs sound at all. You have to reboot the phone in order to get it to work again. It did it when the phones were on Android L and still after the MM update. Web search finds many folks with same issues in regards to that issue. (which is not the issue i am having at all, infact, their phones work fine on my car).
I found a work around for my issue. Since i simply just needed to disconnect and reconnect the BT to my car's head unit, found a widget that does just that. A2DP Connect2. Car auto pairs, i tap widget once, disconnects, wait a few sec, tap again, connects, my media streaming now works fine.
Still a annoyance, but much better than having to navigate menus and such.
BT issues fixed with update to 20j.
I can confirm that the annoying Bluetooth media stream issue in 20e, where you had to re-connect the phone or no media stream....is fixed in 20j. Auto connect works perfectly every time now on my Kenwood head unit.