Related
Hi everyone, and hails to all devs. I'm a long time lurker, first post here. Should have posted in the development thread, but it won't let me because I never posted before :-( ... so hopefully roebeet looks at this section as well...
Also, some background about myself, I'm an android phone user, being using an rooted MB300 phone for a year now. But I am a new gtablet user, and jumped onto this bandwagon with the rest of the wooters. I've flashed the newest TnT lite 4.4 (3/30/2011) onto my gtablet, the installation is smooth, booted up without a problem, and just to be safe, I also did a data wipe (well, actually a factory reset since I didn't use CWM to flash the system). The system runs fine, everything works great, except two things.
1. It won't let me switch input method. I've downloaded and installed swiftkey and iflytek to the gtablet, and in settings, it won't let me check the enable checkbox, after pressing on the checkbox for about 100 times, it finally give me a FC...
2. The speaker constantly playing a low pitch drumming sound for no reason, the sound comes randomly, even during the system idle, with no apps running (i force stopped all running apps in application management). So I figure it is not a problem associated with a perticular app.
is anyone else experiencing the same problems, or is it just me? If it is just me, I'll probabiliy reflash the rom, and hopefully have better luck at it.
Thanks a lot.
To get the keyboard working you'll need to move the apk to data/app then reboot and switch keyboards like normal, I used root explorer. As for the sound issue, I'm not having anything like that on my end so not sure.
Yeah, the keyboard addon issue is one that stock has had since Day One, so TNT Lite is also affected. It's one of many reasons why VEGAn is such a popular ROM, as it doesn't have this problem. VEGAn also supports USB mice, as I recall, whereas TNT (Lite) does not. I keep hoping that the vendor will fix this problem, one of these days.
That sound might be a hardware problem, however. I would recommend getting back to a clean stock baseline like 3588, and test it that way for a day or so. TNT Lite 4.4.0 is using a UAT 3991 system image that should work fine, but perhaps there's something buggy in there. I haven't had the issue, at least not yet.
thanks a bunch for the replies, I've actually played with the stock rom for a day before flashing, it doesn't seem to have to sound problem, and I've flashed to calkulin's rom, it doesn't have to sound problem as well, maybe if i reflash tnt lite, the problem would go away. As for the input method, after encounter the same thing with calkulin's rom, I figured it would be a limitation with orginal tnt system... thanks a lot anyways, I'll try out the different roms on the board, have nothing better to do at friday night anyways...
That keyboard thing
I went nuts wondering why I couldn't change keyboards even when I had three different ones in the input method showing. Here is something someone else posted that seems to work everywhere. I just tested it on tnt lite 4.40 and it works there too. Go to some app that wants keyboard input. I used QuickOffice - QuickWord. Touch the area that will call up a keyboard for input but do a long press. A menu will pop up and one of the choices will be input method. When you choose it another menu will pop up with all the keyboards you have installed. Whichever one you select will become your new default keyboard. To change to another just repeat this procedure. Hope this helps.
enigma0456,
I have the same issue as the original poster and what you and many others describe does NOT work for new keyboards installed via standard methods. Before new keyboards can be exposed to that selection list they need to be enabled and the TNT settings UI doesn't allow for this. :-(
I put together a quick tutorial to push whatever keyboard apk you want to the system.
http://www.youtube.com/watch?v=WK-TQvx6Q-Y&feature=channel_video_title
enigma0456 said:
I went nuts wondering why I couldn't change keyboards even when I had three different ones in the input method showing. Here is something someone else posted that seems to work everywhere. I just tested it on tnt lite 4.40 and it works there too. Go to some app that wants keyboard input. I used QuickOffice - QuickWord. Touch the area that will call up a keyboard for input but do a long press. A menu will pop up and one of the choices will be input method. When you choose it another menu will pop up with all the keyboards you have installed. Whichever one you select will become your new default keyboard. To change to another just repeat this procedure. Hope this helps.
Click to expand...
Click to collapse
That's very cool, good to know.
Different issues...
I do not have any problems with the speakers.
Have not tried a different keyboard.
I am seeing problems coming out of sleep. I get FC on gapps and have noticed lag as well.
Problems with tnt lite 4.40
Hello everyone, i'm new to the rooting and flashing thing. I just bought the viewsonic g-tab and right off the bat noticed that I hate the orginal software. I rooted it with Z4 and flashed TNT lite 4.40. I am having f/c all the time and it freezes just about the same. I have tried to watch movies on it but am unable to hear sound.
Ist it the apps or possably the flash? Again I'm new to this stuff if anybody could help.
Also what is the difference when you root with Z4 than with anyother? Can I flash other roms like vegan if I have already flashed TNT?
scwyno said:
Hello everyone, i'm new to the rooting and flashing thing. I just bought the viewsonic g-tab and right off the bat noticed that I hate the orginal software. I rooted it with Z4 and flashed TNT lite 4.40. I am having f/c all the time and it freezes just about the same. I have tried to watch movies on it but am unable to hear sound.
Ist it the apps or possably the flash? Again I'm new to this stuff if anybody could help.
Also what is the difference when you root with Z4 than with anyother? Can I flash other roms like vegan if I have already flashed TNT?
Click to expand...
Click to collapse
Yep. Just make sure you wipe data and cash. Were you getting the process.acore fc? If so that is a known and easily fixable solution. Did you ever use cwm to fix permissions? That really hrlps with fcs
Im not sure what process.acore or cwm.....Im really green at this, first time doing it
scwyno said:
Im not sure what process.acore or cwm.....Im really green at this, first time doing it
Click to expand...
Click to collapse
You don't need cwm, at least not yet. Backup the data you care about, then do a data wipe via Settings -- Security -- Factory Restore (and let it reboot).
scwyno said:
Im not sure what process.acore or cwm.....Im really green at this, first time doing it
Click to expand...
Click to collapse
I am new to all this too..but i will take a shot....
Do you know what version you had before you went to TNT Lite?
You could try a factory reset (settings->security) to see if it fixes your problems.
Unless you were on the most recent update of the stock ROM version (build 4349) and you dont care about it in the near future, the usual way to flash a new ROM was using ClockworkMod (cwm)
http://forum.xda-developers.com/showthread.php?t=865245
However with the new update (4349) things are in a flux right now, cwm is not the best thing to use if you are on an older stock rom, and if you want to install 4349 at some point. Read through the stickies and familiarize yourself with everything that is going on.
youtube videos by ehunyadi are also a good source of information.
http://www.youtube.com/watch?v=mY_FvJnWNEw
Read Read Read the stickies
If so have you found anything that was not working on it? I am currently running VEGAn Ginger and want to try the HC but I want to know what is not working before taking the time to nvflash and install new ROM.
No, but
Many things are still not workin, but there are great improvements daily. I think it wont be long to say a stable beta version.
So i would suggest to be patient and wait till the beta is out
Thanks, I will stay with VEGAn for now until then.
I loaded a2.2 and it is pretty good. They updated the email apps in a2.3. The only things now not really working are hd video, camera, flash (not sure if flash is working in further updates). Overall, for me the things that are missing are already missing in vegan rc1 (hd video and camera) so I am gonna stay with honeycomb and continue updating as new updates come out. It is nice and streamlined.
Been running every iteration. I've stuck with a2.1 now for a bit.
After this update, they have the overclocking kernel back in place and my gtab hates that. So I reverted back to 2.1, and then just copied the working email and gmail apps over.
Just missing the flash, who cares about the camera.
Came from Vegan Ginger, so the only thing this doesnt have over that is the working flash. But to be honest, its been a lot more stable than ginger ever was.
jetguy35 said:
I loaded a2.2 and it is pretty good. They updated the email apps in a2.3. The only things now not really working are hd video, camera, flash (not sure if flash is working in further updates). Overall, for me the things that are missing are already missing in vegan rc1 (hd video and camera) so I am gonna stay with honeycomb and continue updating as new updates come out. It is nice and streamlined.
Click to expand...
Click to collapse
When you update do you have to reflash the tablet?
Where can I get the honeycomb build for the point of view tablet,
http://cgi.ebay.com/140549831346?ru=http%3A%2F%2Fshop.ebay.com%3A80%2Fi.html%3F_from%3DR40%26_trksid%3Dp5197.m570.l1313%26_nkw%3D140549831346%26_sacat%3DSee-All-Categories%26_fvi%3D1&_rdc=1#ht_4538wt_1065
Quick Update:
I installed a2.2 and it is crazy fast. 1900 quadrant before OC 2900+ after OC. Only caveat is the wifi crashes and the camera issues. Waiting for RC now.
zack407 said:
Quick Update:
I installed a2.2 and it is crazy fast. 1900 quadrant before OC 2900+ after OC. Only caveat is the wifi crashes and the camera issues. Waiting for RC now.
Click to expand...
Click to collapse
You need to update to 2.4 - a good bit was fixed. Still no camera or OpenGL, but almost everything I need is fine as wine!
(I still am not happy with Asus-based 3.X yet - hoping for an Acer-based version 2.5 or something higher ... or version 4)
acid123 said:
Where can I get the honeycomb build for the point of view tablet,
http://cgi.ebay.com/140549831346?ru=http%3A%2F%2Fshop.ebay.com%3A80%2Fi.html%3F_from%3DR40%26_trksid%3Dp5197.m570.l1313%26_nkw%3D140549831346%26_sacat%3DSee-All-Categories%26_fvi%3D1&_rdc=1#ht_4538wt_1065
Click to expand...
Click to collapse
Pretty sure that is just running the Adam or Bottle of Smoke ROM.
The 3.01 they reference is the Honeycomb version, the 2.X referred to here is version of the Bottle of Smoke mod by Roebeet.
Bottle of Smoke
Just got it running today. It took me several hours to figure out the process, but I have successfully loaded the software. I am running Smoke Alpha 3.3. I am experiencing problems with wifi which seems to only be available for about 10-20 minutes. Once it stops working I have to restart the system. I can't scan or restart wifi from with in settings. I did get vulkano to work but it to locked up when I tried to change channels. I couldn't get Dolphin HD to work -- it loads but won't render any web pages, but Firefox beta (5) seems to work just fine. For some reason I can't download opera 11 from the market but other apps install with not problem. I have tried a few basic games (for the grand kids) and they seem to be working ok.
Does anyone know if Netflix is working for Bottle of Smoke??
Not on my viewsonic. You can access your queue but you can't view any videos.
johnqfig said:
Just got it running today. It took me several hours to figure out the process, but I have successfully loaded the software. I am running Smoke Alpha 3.3. I am experiencing problems with wifi which seems to only be available for about 10-20 minutes. Once it stops working I have to restart the system. I can't scan or restart wifi from with in settings. I did get vulkano to work but it to locked up when I tried to change channels. I couldn't get Dolphin HD to work -- it loads but won't render any web pages, but Firefox beta (5) seems to work just fine. For some reason I can't download opera 11 from the market but other apps install with not problem. I have tried a few basic games (for the grand kids) and they seem to be working ok.
Click to expand...
Click to collapse
Except for Opera, all of those are (well) documented issues. Read through the last 10-20 pages in Roebeet's BoS thread at Slatedroid and you will see many other people talking about the same things.
johnqfig said:
Just got it running today. It took me several hours to figure out the process, but I have successfully loaded the software. I am running Smoke Alpha 3.3. I am experiencing problems with wifi which seems to only be available for about 10-20 minutes. Once it stops working I have to restart the system. I can't scan or restart wifi from with in settings. I did get vulkano to work but it to locked up when I tried to change channels. I couldn't get Dolphin HD to work -- it loads but won't render any web pages, but Firefox beta (5) seems to work just fine. For some reason I can't download opera 11 from the market but other apps install with not problem. I have tried a few basic games (for the grand kids) and they seem to be working ok.
Click to expand...
Click to collapse
which version, where did you get it, link please and what was the process?
Hello - I've been using Vegan Tab 5 since I got my gtablet last Christmas. It has been pretty nice except that the power/screen button always glitches, and every so often corrupts the profile and I have to wipe all my user data and start fresh.
I have the market, flash/hulu, and the camera working. So my question is, since I just had to wipe it again and start over, what is/is there a current, most stable installation I can use that will have the same features - market, wifi, flash/hulu, camera, and does not crash and force a wipe from the damn power button?
Gingerbread? Honeycomb? Flashback? Beasty/Clemsyn Ultimate Froyo?
If there are awesome new features in newer ROMs that don't have a working camera (I think I read something about that in Honeycomb) let me know. My daughter will be disappointed but thats ok
Thanks
basalt51 said:
Hello - I've been using Vegan Tab 5 since I got my gtablet last Christmas. It has been pretty nice except that the power/screen button always glitches, and every so often corrupts the profile and I have to wipe all my user data and start fresh.
I have the market, flash/hulu, and the camera working. So my question is, since I just had to wipe it again and start over, what is/is there a current, most stable installation I can use that will have the same features - market, wifi, flash/hulu, camera, and does not crash and force a wipe from the damn power button?
Gingerbread? Honeycomb? Flashback? Beasty/Clemsyn Ultimate Froyo?
If there are awesome new features in newer ROMs that don't have a working camera (I think I read something about that in Honeycomb) let me know. My daughter will be disappointed but thats ok
Thanks
Click to expand...
Click to collapse
You might consider moving to a 1.2Bootloader.
http://forum.xda-developers.com/showthread.php?t=1392761
Try a HC based ROM FB 10.3. It's pretty slick.
If you prefer a FROYO base, Beasty/clem Ultimate is stable also..ans very fast
to make your current problem go away, you need to back up your apps/tab and NVflash and reinstall your current ROM
qkster said:
You might consider moving to a 1.2Bootloader.
http://forum.xda-developers.com/showthread.php?t=1392761
Try a HC based ROM FB 10.3. It's pretty slick.
If you prefer a FROYO base, Beasty/clem Ultimate is stable also..ans very fast
to make your current problem go away, you need to back up your apps/tab and NVflash and reinstall your current ROM
Click to expand...
Click to collapse
While I do agree Flashback ROM is very pretty, I've had zero luck with Flashback ROM concerning a fully working and stable Flash Player. I watch a lot of streaming videos on my gTab on Hulu, CBS, FOX, Amazon Prime, etc... and I've tried with Flashback 10.1 and 10.3 and neither of them would let me watch videos via Flash Player.
So, after trying VEGAn 5.1.1, CyanogenMod 7.0.1, VEGAn Ginger, Mountain Laurel 3.1.0, and Flashback 10.1/10.3 I've come back to VEGAn 5.1.1 because it's the most stable and fastest for me (with pershoot's latest FroYo kernel).
I've also used VEGAn 5.1.1 off and on for the better part of a year but haven't had the issues the OP is reporting where my profile gets corrupt forcing a wipe/restore. I guess I've been lucky.
sjmoreno said:
While I do agree Flashback ROM is very pretty, I've had zero luck with Flashback ROM concerning a fully working and stable Flash Player. I watch a lot of streaming videos on my gTab on Hulu, CBS, FOX, Amazon Prime, etc... and I've tried with Flashback 10.1 and 10.3 and neither of them would let me watch videos via Flash Player.
So, after trying VEGAn 5.1.1, CyanogenMod 7.0.1, VEGAn Ginger, Mountain Laurel 3.1.0, and Flashback 10.1/10.3 I've come back to VEGAn 5.1.1 because it's the most stable and fastest for me (with pershoot's latest FroYo kernel).
I've also used VEGAn 5.1.1 off and on for the better part of a year but haven't had the issues the OP is reporting where my profile gets corrupt forcing a wipe/restore. I guess I've been lucky.
Click to expand...
Click to collapse
From my experience, funny things happening is usually due to corruption data.
NVflash/wipe usually restore most functions.
I don't use flash much, so I didn't care much about streaming.
I'd just tried out Beasty/Clem Ultimate...It is very fast and stable as well...
Thanks for the advice. Flash is pretty important for me, so it sounds like I'm using the right build for my needs.
I wish i didn't have issues with the power button, but wiping/flashing isn't the end of the world. It doesn't happen very often, but occasionally when the screen sleeps, the button won't bring it back up. After few tries the tab reboots and then sometimes i end up with a corrupt profile and it wont startup.
I'll learn to live with it.
Thanks again
Power button sleep
basalt51 said:
Thanks for the advice. Flash is pretty important for me, so it sounds like I'm using the right build for my needs.
I wish i didn't have issues with the power button, but wiping/flashing isn't the end of the world. It doesn't happen very often, but occasionally when the screen sleeps, the button won't bring it back up. After few tries the tab reboots and then sometimes i end up with a corrupt profile and it wont startup.
I'll learn to live with it.
Thanks again
Click to expand...
Click to collapse
I had this problem as well. I read a post on this site to use a program on the Market Place called Wifi lock or Wifi keep alive, seems to work for me. The problem is when the Wifi goes to sleep.
As for the new ROM I have just upgraded to Vegan Tab 7.1 files can be found here
http://vegantab.gojimi.com/2011/08/26/vegan-tab-gingeredition-7-1-0-for-bootloaders-1-1-and-1-2/
Do not upgrade Google Maps this will cause force close for maps you need to stay on an older version I’m using 5.5.0.
Hello There I updated my folio to cm9 and found out that i cannot post on developement , so i decided to create a new thread to here in order to publish todays testing of the new rom.
First thing is that i installed with cwm 5.0.0.9 with no problem so that worked too.
It worked smooth and fast. Not as fast as foliomod 1.4 but almost.
I have SOD with no app installed only market. (i try to reinstall with the creator proposed recovery)
I found that i can install now the 3.1 and up applications like adobe photoshop and ideas .
I painted photoshop for a few hours and had a strange freezing first than after a minute and so it came to life by itself.
30 minutes later it freezed for good and it ruined the system so i had to reinstall the ROM...
I couldnt make a photo of the system message of boot error but it said 2 differend one wifi related and 1 driver related...
(sorry i have no chance to logcat because of win7... If someone pm me about a solution of logcat work in win7)
I am a newbie so i dont know how to use developer related programs and webpages but i try to share information with the community here.
All in all i think this ROM is faster and better than honeycomb mods and runs photoshop (i wanted a tablet to paint...)
I had strange wifi signal ups and downs during connection...
working:
- UI
- Wifi
- Bluetooth
- Sensors
- Audio
- Gapps
- skype, imo
- games (cut the rope), gameloft apps (x2 optimus version)
not working
-youtube app
-flash in browsers
-playing flash videos
I want to thank for all who is working on the ICS ROMs right now, you do a really good job guys, please keep up so we can all have a very good tablet working .
Im looking forward for solutions for not working parts and updates .
So glad to hear the photoshop works on it - that's one of the apps that I was really hoping would work. Did you say that photoshop remained pretty stable over those few hours?
I know that the rom is going to be pretty unstable though - SOD is not a real issue to me, but the rom corrupting itself is a bit of a worry!
no sod for me, stable rom, youtube works fine, remove the hd video display, we have to wait for the flash player updates the rom, maybe you should use the Opera browser.
Hey guys,
Flash didnt work with my 4.0.3 Rom too. The "SOD" wakes up after round about 30 sec in my case, dont reboot so fast.
Working Stuff:
Apparatus
GTA 3 (v. 1.2)
Youtube (not full tested)
Reckless Racing HD
My Issues:
Sound sometimes didnt work after "half SOD"
Wlan Problems (didnt connect to my wlan, after reboot 2 or 3 times its gone, this bug is since the Dexter 0.3 mod)
My Question:
Can i change the Resolution? The HC 0.3 Rom, had the best for my opinion
Anyone try a usb gamepad? This would be awesome with the snes emu
Can i turn off the softkeys?
Can i fix the 180° display rotation from bootup?
I will try some tests and things and give feedback.
best regards
Dave
A guy called Strozzi posted that
Screen rotation: OK but after having enabled it in the trebuched app
Click to expand...
Click to collapse
Does that fix what you mean?
I find the whole 10 posts before you post in the development section a bit silly. I understand the desire for the forum to not be full of 'noobs' but I registered because I could help with an answer to a question that someone asked. Oh well...
Loving all your reports on ICS tho... going to give it a try once the app store starts showing everything! Photoshop is the main pull for me tho...
It was stable until the slowup and freeze, i think it is useful if u save frequently. It has the core funcions of everything you need in photoshop.
someone write that the flash contend work only with the opera browser, i will test this at the evening.
What i mean with the rotation is, the display looks greater when the screen is 180° rotated
greets
Dave
realmausi said:
someone write that the flash contend work only with the opera browser, i will test this at the evening.
What i mean with the rotation is, the display looks greater when the screen is 180° rotated
greets
Dave
Click to expand...
Click to collapse
Ah yes, i dont think thats possible to phisically turn the display 180 degrees because of construction... It is the biggest fault in toshiba's development history to use a screen like this...
SO todays testing last update on cm9:
Still no idea on SOD.
I got into a bootloop from a normal power off than power on with wifi
After that loop i used mblasters recovery to reinstall it again...
got into bootloop right after intstall. I did a factory reset to get it started up again.
I got a system up and running again with no apps :S
I dont think this is app related...
I have SOD with the new recovery too. Looks like i'm the only one fighting with SOD. ( my device go to hibernation after 30 sec from screen off and no way to wake it up)
And.... after the first SOD i got into bootloop again... then with a simple restart it is working... i dont know what to do now. Maybe reinstall is not necessary if this happens every now and then...
i got the 2. time a SOD, dunno why its totally random....
Flash didnt work with the Opera Browser. I think i make a fastboot -w shortly and test it again.
Its possible that is the old genovea problem with the 256 mhz and vcore bug, with the SOD?
I think i install a Linux to get some logcat output.
edit: im a dumbass, logcat also available @ adb.exe logcat :/
best regards
Dave
really good job on this rom! Try it with ADW launcher EX and it will run completely smooth!
It's an experimental build and we already have a nearly stable rom, it just needs to improve the performance, add ondemand cpu governor (performance governor has horrible battery life), get flash working, use camera (not really important for me) and we would have the perfect rom!
painkiller_93 said:
really good job on this rom! Try it with ADW launcher EX and it will run completely smooth!
It's an experimental build and we already have a nearly stable rom, it just needs to improve the performance, add ondemand cpu governor (performance governor has horrible battery life), get flash working, use camera (not really important for me) and we would have the perfect rom!
Click to expand...
Click to collapse
Someone mentioned in the dev thread that there is no flash version for ICS yet which is why flash isn't working. This true?
As for camera - really not a biggie. They'll only get that working once the source for it is released. Not sure if that is...
The strange thing is that some people are saying this rom is perfect and stable while others are talking about it crashing and going into a bootloop... :/
EnergyUK said:
Someone mentioned in the dev thread that there is no flash version for ICS yet which is why flash isn't working. This true?
As for camera - really not a biggie. They'll only get that working once the source for it is released. Not sure if that is...
The strange thing is that some people are saying this rom is perfect and stable while others are talking about it crashing and going into a bootloop... :/
Click to expand...
Click to collapse
It's pretty stable for me, I'm using it as "every-day" rom. Flash Player for ICS was released in December, also I've seen it working nicely on a GT-i9000 with 4.0.3 just downloading flash from android market.
I neither care about the camera. I've never used it. Now I rmember another problem on the rom: USB storage (connecting folio to PC) doesn't work.
Well I bit the bullet and have gone to CM9. The rom is great, took a while to get my google account setup (kept getting the unreliable connection error) but overall I was impressed. One SOD but seems way more stable than foliomod and the speed is great.
My only question is... How did you guys get apps on that aren't 'supported'. Two apps that I know work are 'unsupported'. Do I just change the build.prop or are you guys using a different method? Really want photoshop touch and RawVision on my device.
Oh and a small tip, I forgot to wipe when I upgraded and I had a working update from CM7. Only issue was that the market app was broken, but as that's pretty integral I had to wipe...
tested the new build, so far it has he same issues as the previous build, but Wifi lost when tablet is sleeping seems to be fixed! Also I've noticed that multi-mount sdcard app doesn't work now.
new version
I still cannot get the folio out of hibernation in cm9, however i figured out that my total crash message was not real. When freezed, the folio wont boot for a while (30 minutes or so). After about half an hour it is booting like nothing happened. Freezing was a rare thing with r1 now it is regular, so it is not too good. I think battery drain is still problem. Many apps is working corrupted or not work at all, but some other work that not before. Oh and you have to forget flash for now. I think it is still not good for everyday use but it is definitely not far from that. Hold on for 1 more month Nopy pls.
My issuses:
- Power Button needs to be pushed twice or more for wake UP from standby
- camera Shows mutiple (4) live pics, no Video ins possible
- No Market Download works
- home Button (softbutton on the side ) is out off order
- Touchscreen ins a little Bit less sensitive
Flash, gmail, and youtoube works, gapps Form goo-inside ins installed
Sent from my GT-P7510 using Tapatalk (No, its my folio100 )
hitting several times power button solves SOD problem for me......
After instaling last cm9 version with 2.6.39 kernel I can't get rid off SOD...
hi there,
i just installed the new CM9.0.0.0
Great ROM, very good job, everything seems to work fine
Just one thing : i've got something like small electrical discharge when i touch the screen, i can hear the sound of it like static electricity
Am i the only one and what can i do?
Market not working
Hi *,
also installed cm9 with kernel 2.6.29.
A real awesome rom, thank you for the good work!
I have the issue that apps won't install in the market. When trying to download, folio says that an error has occured.
Any hint what could cause this behavior?
I installed the gApps with clockworkmod recovery.
renamed zinfile in update.zip, copied to sdcard
booted into recovery
applied update.zip to recovery.
Apps work, market also but u can't donload any app.
thanks,
Buggi
Hi All,
I would like to try a better ROM on my HD2 (Tmous WM6.5)... any suggestions and where to download?
BTW it was running really slow for some weird reason so I flashed stock ROM back on and my MobiTV stopped working
I found the mobitv cab here and tried to reinstall it, it immediately upgrades to the latest file from MobiTV then it says cannot authenticate user. WTH...
But anyway I'd like to try a few ROMS since so much work has gone into making them...
Thanks!
http://forum.xda-developers.com/forumdisplay.php?f=534
Artemis & Energy are worth trying & near top of threads on link above, Energy being my favorite & a superb WM6.5.x experience.
Do read up a little to make the install & user experience a smoother task.
very cool thanks I got a couple of the Energy ROM's. the install says to install hardSPL first
update: I have SPL 2.10.000
cant install now go find what to do to get to a compatible SPL....
update 2: i installed HSPL 2.08 then an energy rom, looks great! i installed mobitv, and the program just freezes when started. any idea why?
update 3: just installed skype and it too wont work... mobitv and skype my two favorite apps grrrrr any advice appreciated!
update 4: got skype working by going to internet browser first (wake up internet data connection?) mobitv still dead, jim
Skype has setting for connection type used when started, wifi, sim data ect so this needs adjusting to your requirements & will save need of triggering data via your browser.
As for Mobitv I am unsure as have not used it as for AT&T network only, could be your version only runs on genuine AT&T rom & need a modded version to run on other roms, do a search on NRG rom thread & see if you come up with anything. I will browse later & if see anything relevant post links.
Hi just an update, I did install one of the Energy ROMs and it looked and worked AWESOME! Many thanks for the help here to get that going. My HD2 on/off button died and the screen wouldnt respond, same as the last one. I bought a button strip off the web but broke the HD2 trying to get it apart to do the install despite following the youtube example. I wont buy another HD2 since the lower right button is obviously defective and they wont back it up.
Waiting for the Samsung Galaxy Note to come out on TMO-US, and meanwhile I picked up a Dell Streak 7 with Android 3.2 and a monthly sim card for data. I cant receive calls (except on skype) or SMS, so I bought a cheap walmart flip phone and when the Note comes available I will try that, even though they are EXPENSIVE without contract!
Also, of COURSE the Streak's honeycomb 3.2 wont run TmobileTV but it does run skype nicely. I find it odd that there is TmobileTV for 2.2 and 4.0 but not 3.2 but whatever.... :|