Related
ok, now I am totaly screwed.... imate stuck in loading screen with version numbers etc... Not going further and bootloader not available.... Is there any way to communicate with unit while it's in this mode?
what you are saying is unclear. Does your device say "Serial" (or "USB") on top with "V 1.06" on the bottom?
If so, you ARE in bootloader mode. If not, then please specify what it actually says on the screen
no, it's not in bootlader mode. it's in Tmobile screen at the bottom it says R 1.12.00
G blah
D blah
it stuck there. and I can't enter bootloader mode. looks like it's totaly dead
What happens when you try to enter bootloader (Power - Action - stylus)?
What happens when you try to press (Camera - Record - Stylus)?
GO TO HELL ROM 1.72.104
F%@#&!?G FREAK ROM!! :evil:
Please calm down... in a day or two, this problem will be solved and everyone will probably be back to where they were
((and a lot smarter than they were too))
Victor said:
What happens when you try to enter bootloader (Power - Action - stylus)?
What happens when you try to press (Camera - Record - Stylus)?
Click to expand...
Click to collapse
It both cases it still sits in this screen
Try removing the battery and waiting for a period of time (20 Mins ??)
Then try the two things again (first without the battery -- for the heck of it -- and then replace the battery and try them)
...obviously, you need to remove it from the charger too :wink:
to be clear... nothing is expected to happen when you try to do these without the battery in, except perhaps (??) clear out any remaining charge held in capacitance, if any.
Kinda like removing the batteries in the remote control of a TV and then pushing a button on it (there is always enough charge in the capacitors for a single push/command to the TV
that once happent to me
and softreset dident help
so i did a hardreset and that fixed it
fixed my data too though :/
Rudegar said:
that once happent to me
and softreset dident help
so i did a hardreset and that fixed it
fixed my data too though :/
Click to expand...
Click to collapse
nothing happenes Sent email to imate tech support. I am not sure if they going to warranty unit with Tmobile betta screen stuck on IMATE. looks like i am short 700 USD........
Is there any way to communicate with XDA2 when it stuck in this loading screen? Terminal via serial cable doesn't work. anyother low level programs are out there? please, help.
Have figured out that the problem is in the Bootloader. If there is a way to (and I know there is) revert to an older Bootloader version, then the problems will all be solved.
Problem Solved : Dead devices due to tmob 1.72 + Downgrade
OK Guys. Problem Solved : Dead devices due to tmob 1.72 + Downgrade
http://forum.xda-developers.com/viewtopic.php?t=8606
That's great, but unfortunately my device is one step more screwed that others - no bootloader not even working Windows now.
Is there any way to boot directly from SD card?
victor,
can you upgrade or downgrade the bootloader ? If you can, HOW? please post the way to upgrade or to downgrade the bootloader. :shock:
ID64,
I had an XDA I and wiped the bootloader by accident. As far as I know, you have only two options. The first one is JTAG [http://www.xda-developers.com/jtag/] but I don't think the boards have been documented yet for XDA II. The other option is to bring it back to where you bought it from. Tell them there's something wrong with it and play dumb. If you're lucky they might replace it for you, if they assume that you are still within warranty.
Yes, there is a way to upgrade/downgrade the Bootloader. I just don't know how.
The bootloader is locked, that is the problem you have (except for those who cannot access the bootloader).
If you know the right syntax and use the password to the bootloader (it is BOOTLOADER), you can load the proper ROM back using the "LNB" command. However, they have changed the syntax since ITSME's doc on the subject, or he mis-documented the syntax to the bootloader. Or at least his syntax was wrong with 1.06 version.
I got mine fixed, but I have means available that 99.9% of the people out there do not have. If I knew more, I would tell you about the percise syntax in the bootloader -- but alas, I am not a developer.
Victor said:
Yes, there is a way to upgrade/downgrade the Bootloader. I just don't know how.
The bootloader is locked, that is the problem you have (except for those who cannot access the bootloader).
If you know the right syntax and use the password to the bootloader (it is BOOTLOADER), you can load the proper ROM back using the "LNB" command. However, they have changed the syntax since ITSME's doc on the subject, or he mis-documented the syntax to the bootloader. Or at least his syntax was wrong with 1.06 version.
I got mine fixed, but I have means available that 99.9% of the people out there do not have. If I knew more, I would tell you about the percise syntax in the bootloader -- but alas, I am not a developer.
Click to expand...
Click to collapse
Thanks for the reply, Victor. When you talking about commands for bootloder what connection to PC you are talking about? Serial or jtag?
I am referring to the device in the cradle, in bootloader mode. The screen in this mode should read "USB" on top and "V.1.06" (or whatever version) on the bottom. Very hard to read, as there is no backlight.
Anyhow, just for fun.... why don't you try the following:
Uncheck the USB option in Active Sync Connection Settings
Cold boot your system (hard reset)
place the device in the cradle
run the communications software (found on this forum)
When asked which COM port to use, click on the down arrow and see if there is a USB port listed (should be top entry in list).
If so... click it. (if not, you are basically done)
After clicked, then hit return (enter) on the pc a few times.
Anything happen?
I was able to access the bootloader for 5 times using the softreset and holding the power button.
By the time I figured out how to use the patch to bypass it, it's too late.
It no longer boot to the bootloader.
Now it just by-pass the bootloader screen and goes directly to the T-Mobile screen.
I've tried everything . Hard cold reset. Hold power-on and softreset
numerous time without success.
Anybody knows of any other way to access bootloader?
Bootloader version 5.22.
Maybe the Bootloader has a malfunction.
You can try to fix the bootloader. In the XDA-Tools, there should be a little tool to fix it.....
Stefan
If you are referring to running from the command prompt:
"pnewbootloader bootloader_v5_15.b0"
It didn't work for me.
I cradle it and ran that command and this is what I got:
"
unable to find flash info offset, cannot disable bootloader writeprotect"
message.
Anything else I can try?
TIA
Chip
Yes, this program i´ve meant. WHich version are you using of this tool? There have been an update of it, about half of a year ago. Maybe you download again the XDATools of the ftp and retry it.
Stefan
Thanks, got the updated file and fixed my bootloader.
the version you are referencing to is included here in case anyone
else wants it.
"pnewbootloader_40116.exe"
Thanks to all the people working hard to bring us these features!
And a special thanks to "stefan" for bringing a great kitchen!
The machine by it's default is so "weak!".
Chip
Glad to hear all is working now again....
Stefan
Hello.
I have a problem I hope someone here can help me to solve..
I have an Orange SPV M3100 that hangs on the Windows Mobile screen when I try to start it.
I'm able to go into bootloader mode, and i have tried using mtty142.exe with the set 14 0 command. It still won't boot. I've also tried to hard reset it.. still won't boot..
What I did was trying to unluck the SIM-lock with the Universal unlocker (HTC_Uni_Unlock_v1) from buzz. At the time I thought universal meant that it worked on all HTC devices (stupid, I know)... And I also thought it was harmless to just try and see if it worked. But I got an error around 92-93% and after that my device won't start. So my radio ROM might be screwed.
I'd like to flash my ROM with the i-mate one (JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship.exe) and then add the ext-rom. But how do I do that when I can just access the bootloader screen? And do you think it will boot again if I'm able to flash it?
Here's some more info about my device:
HERM100
IPL-1.01
SPL-1.04
Thank you very much in advance. Help will be highly appreciated.
No your rom *is* screwed. You can get into bootloader, you can even get to 11% of a dopod etc rom upgrade if you try, but you will not flash a new radio.
You CAN boot the device.
Do a hard reset, but do not press spacebar to reboot after. Instead, do a soft reset. The unit should boot but as you've screwed the radio you will not get a gsm signal and the phone will say unknown sim status.
I know this as I bought one cheap after the owner had done exactly the same as you.
IMEI-check's unlock solution is the only one that works IIRC, and in some cases this re-writes the security area of the phone and repairs similar issues, but in this case I could not get the prog to read.
You need to return the device to HTC - you'll need to pay approx £35 for reflashing back to the orange rom. This is what I had to do.
Currently you cannot book the m3100 in through the web as it's too new, instead email / call them.
http://service.htceurope.com/
edit - or if you're an orange customer ring 150 and act dumb saying it ' won't work'.... :wink:
Richard
What happens if you just leave the phone in bootloader mode and then try to flash any ROM (imate, dopod, htc...)? run 2 times the RomUpgradeUt.exe if you get an error on the 1st try.
If you get an error while running the rom upgrade utility you can monitor the USB port while upgrading (you will see the real error from the bootloader then), there's some more info on this wiki page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
good luck
pof said:
What happens if you just leave the phone in bootloader mode and then try to flash any ROM (imate, dopod, htc...)? run 2 times the RomUpgradeUt.exe if you get an error on the 1st try.
If you get an error while running the rom upgrade utility you can monitor the USB port while upgrading (you will see the real error from the bootloader then), there's some more info on this wiki page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
good luck
Click to expand...
Click to collapse
No, if you want to send it back under warranty do not try to run a rom update as there are no orange rom packages. As described in my post above, it will get to 11% and stop. The device will be in the same state as before, with the same ext rom, but the splash screen and bootloader will have changed.
i.e: it will be bloomin obvious you tried flashing it and failed. Not what you want if you try for a warranty repair....
There is no error from the bootloader - as there is no radio rom present and no security area the upgrade process just hangs.
Richard
fluffcat1 said:
No, if you want to send it back under warranty do not try to run a rom update as there are no orange rom packages.
[...]
i.e: it will be bloomin obvious you tried flashing it and failed. Not what you want if you try for a warranty repair....
Click to expand...
Click to collapse
That's true, do not try to flash any other roms if you want to use the warranty or send the device back...
Thank you very very much for your help guys.
As I'm the administrator of these devices in the company I work for I just grabbed a new SPV and will send this thing back to Orange. It sounded like I'm getting a new one..
Well, I think I've learnt my lession.
Oh, and I have another question. Is there a reg editor I can install on this one so I can remove the app lock? I know I can install java apps, but it's a bit grumpy about apps that needs installation (the developer must be certificated).
Cheers guys.
Hi,
Try to flash a new rom using the SD card method described here:
http://forum.xda-developers.com/viewtopic.php?t=62596
The rom must match your CID. Let us know if it works
pof said:
Hi,
Try to flash a new rom using the SD card method described here:
http://forum.xda-developers.com/viewtopic.php?t=62596
The rom must match your CID. Let us know if it works
Click to expand...
Click to collapse
Errr, did you read the last post? He sent it back......
Richard
I just wanted to let him know there's a possible solution, it just in case he still has the unit
pof said:
I just wanted to let him know there's a possible solution, it just in case he still has the unit
Click to expand...
Click to collapse
Maybe his search is broken as well as his old phone eh?.... :roll:
fluffcat1 said:
You need to return the device to HTC - you'll need to pay approx £35 for reflashing back to the orange rom. This is what I had to do.
Click to expand...
Click to collapse
Sorry to take the thread a bit OT, but just wanted to confirm this again.
So, if I flashed my M3100 with a different ROM, and then had to return the phone to Orange for repair for a different reason, I can send it back to HTC just to have the ROM reflashed, and then send the phone to Orange to get the repairs done?
I've been hesitating on whether to flash the phone with a non-Orange ROM because I didn't want to give up the ability to obtain warranty repair (as there is no ROM upgrade yet). If it's just a matter of £35 and then everything else as normal, maybe it's not so bad...
Thanks!
My SPV M3100 won't start!!!
I also did this, so if anyone can find a solution it would be greatly appreciated.
Also tried this and it didn't work for me:
Try to flash a new rom using the SD card method described here:
http://forum.xda-developers.com/viewtopic.php?t=62596
"I have a problem I hope someone here can help me to solve..
I have an Orange SPV M3100 that hangs on the Windows Mobile screen when I try to start it.
I'm able to go into bootloader mode, and i have tried using mtty142.exe with the set 14 0 command. It still won't boot. I've also tried to hard reset it.. still won't boot..
What I did was trying to unluck the SIM-lock with the Universal unlocker (HTC_Uni_Unlock_v1) from buzz. At the time I thought universal meant that it worked on all HTC devices (stupid, I know)... "
rachelm700 said:
I also did this, so if anyone can find a solution it would be greatly appreciated.
Also tried this and it didn't work for me:
Try to flash a new rom using the SD card method described here:
http://forum.xda-developers.com/viewtopic.php?t=62596
"I have a problem I hope someone here can help me to solve..
I have an Orange SPV M3100 that hangs on the Windows Mobile screen when I try to start it.
I'm able to go into bootloader mode, and i have tried using mtty142.exe with the set 14 0 command. It still won't boot. I've also tried to hard reset it.. still won't boot..
What I did was trying to unluck the SIM-lock with the Universal unlocker (HTC_Uni_Unlock_v1) from buzz. At the time I thought universal meant that it worked on all HTC devices (stupid, I know)... "
Click to expand...
Click to collapse
the above link doesnt work?
zohaer21 said:
the above link doesnt work?
Click to expand...
Click to collapse
IIRC it is this link on the new forum:
http://forum.xda-developers.com/showthread.php?t=277281
spv m3100 don't start
hello guys
I have the same problem about spv m3100. I used "universal unlock tool" to unlock my device and now it don't start,don't boot...I tried the Hermes SD Card flashing methods with qtek001 rom and, a white screen with "loading...." appears for 2 second and then nothing else appened. I think that the method is right but I need to use a different software. what do you think about?
please help me
thankksssss
My SPV M3100 won't start
SD card method is no good as there is no upgrade from Orange until January.
Tried to do a radio upgrade explained here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
But it didn't work just came up with connection error, tried to monitor USB but nothing showed up to find out why, althouth mtty commands always do show up in USB Monitor.
Still have a brick and looking for a solution, hopefully, someday, please someone help me I am loosing my mind.
Hello
How to enter boot mode on HTC 200 ?
My htc hangs on HTC screen.
I'm trying to reflash it.
Thanx
Chris
@chrisro, Please read the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
http://wiki.xda-developers.com/index.php?pagename=Hermes_Resets
Thank you very much.
Greets form Poland !
Chris
Please dont tell me to read the other threads on this issue. Your better off skipping this topic and moving on to the next. I preffer this to go untouched with no replies than to have smart ass comments. Ive been reading pages and pages on how to do this for weeks with no luck. Theres about a few dozen options and with all the suggestions I have no idea where to start, nor what programs to download first, understand what these terms mean, etc. Maybe this isnt my cup of tea and I shouldnt even be attempting this but thats neither here nor there cause the fact of the matter is I screwed things up. Now Im looking for some help from the community.
Its getting real expensive and I need a serious expert who has patience and is very thurough. This is my second unit and I still have the 1st one that is still bricked as well. This is the situation for both. When I go to setting>system>device info, there was no radio version, no protocol version, no IMEI, and the call duration info was zero. I was able to use both units for thier PDA functions but not the phone prtion. I was attempting to SIM unlock and SuperCid em both. Now they are both stuck in bootloader. Im not sure what went wrong but I have done 3 other 8525's with success also updated roms and reverted back and no problems. I just cant seem to get the bricking undone. Now Ive done tutorials on housing swaps, step by step and provided pics as well. You know what, people still ask how to do it. Its a fact guys. some people just need a little more direction than others. What Im trying to say is Im looking for help not criticism, Im a grown man and the last thing I need is for some young punk to flame me,or telling me to read cause Its already been done. I can easily buy another phone but Im willing to learn how to get out of this bricking crap. So its back to reading. TIA
Heres How You Do It
I know how you feel because last night i bricked my 8525 cingular, Okay, If You Can Start Up Your DEvice All You Have to do is reset it to te factory condition and that would help you, unfortunatley all of your data would be lost, but its better than a bricked expensive phone. Oh, but your stuck in bootlaoder, well i have good news for you your not bricked your just stuck, go to the att website and a download and update and the update should recogize your phone even though the computer dosent, after that you have a brand new updated 8525 and that should get you out of bootloader.
ivan345 said:
I know how you feel because last night i bricked my 8525 cingular, Okay, If You Can Start Up Your DEvice All You Have to do is reset it to te factory condition and that would help you, unfortunatley all of your data would be lost, but its better than a bricked expensive phone. Oh, but your stuck in bootlaoder, well i have good news for you your not bricked your just stuck, go to the att website and a download and update and the update should recogize your phone even though the computer dosent, after that you have a brand new updated 8525 and that should get you out of bootloader.
Click to expand...
Click to collapse
Really??? This seems too easy. I'll try anything at this point. So you say its not bricked,just stuck in bootloader? So there is hope? Thats def bice to hear. I'll give it a shot. Thanks
LOL. Tried and and same problem. It sounded too good to be true. Thanks for the tip though
I'm not trying to be smart (believe me, I'm not equipped to do that!) just trying to help determine the exact state so that someone may be better able to help.
You say the phone's are stuck in bootloader, but that you're able to look at the device info on them, and use them for their PDA side. I always thought stuck in bootloader meant that when you switched it on, it came up with the multi-coloured bars but got no further (as if you'd reset it while holding the power and side OK button). Do you mean that the phone's work as normal but have no PHONE side of things, or can you get no further than the bootloader screen when trying to start them up?
Like I said, not trying to split hais just trying to get the exact symptoms for someone cleverer than me to help.
OK by the sounds of it you are definatly NOT stuck in bootloader.
firstly can you please answer the following questions from the wiki:
1. Which is your SPL version?
Put your hermes in bootloader mode (side ok + power button + softreset), the SPL version appears in yellow letters on the upper side
2. Which is your radio bootloader (HTC_BOOT) version?
If your radio version is <=1.27 your HTC_BOOT is 0106 or 0107, the only exception is Softbank X01HT 1.14 radio which has HTC_BOOT 0108
If your radio version is >= 1.30 your HTC_BOOT is 0108
If you don't know which is HTC_BOOT, but you have bootloader 1.01 MFG, 1.10.Oli or 1.04 you can access to the radio bootloader using the command 'rtask a', then type 'rversion' and hit enter (you won't see anything in the screen when you type rversion, because the radio bootloader has no echo, this is normal).
3. Is your device able to boot Windows Mobile OS?
This one is easy: If can you see your today screen and use your phone as a PDA means you can boot OS. If you only see the splash screen, bootloader screen (tri-color) or windows mobile splash screen you can't boot OS.
4. Do you see "No GSM" message in red letters on the first splash screen?
Reset your hermes, you will see some numbers and letters appear in red and disappear after a few seconds... your radio version is there, but if your radio is corrupted for some reason, you will see 'No GSM'.
5. Does your OS rom have KITL enabled?
Hold COMM MANAGER and POWER buttons together and reset with stylus, if you see the message "Select KITL Transport" your OS rom has KITL enabled, otherwise not.
Click to expand...
Click to collapse
Please post the answers back here when you are done.
Stu has an excellent point. Need to know the exact state of the 8525. Exactly what you have done to it....
Example: I used Pof's free HTC SIM unlock and SuperCid program. It appeared to complete successfully. However, now when I start the 8525 up it automatically goes into the tri-color boot loader screen. I had not applied anything else to the 8525 prior to trying to unlock it.
Also, there is a sticky for dead hermes. I bricked mine as well, and was able to get passed it. I posted in the sticky. If you post in that sticky, then someone else may benefit from what you find out. Keeps everything in one place
jeffreyj900 said:
Stu has an excellent point. Need to know the exact state of the 8525. Exactly what you have done to it....
Example: I used Pof's free HTC SIM unlock and SuperCid program. It appeared to complete successfully. However, now when I start the 8525 up it automatically goes into the tri-color boot loader screen. I had not applied anything else to the 8525 prior to trying to unlock it.
Also, there is a sticky for dead hermes. I bricked mine as well, and was able to get passed it. I posted in the sticky. If you post in that sticky, then someone else may benefit from what you find out. Keeps everything in one place
Click to expand...
Click to collapse
Yeah, but, if you used V3a to unlock it, you actually got Oli's BL as part of the deal--hence why you can unbrick it easily!
WELP no smartass comments HUH? Well if you ****ed up 2 phones like this you really must be doing something wrong there buddy. your phone is not stuck in bootloader if you can see the device info thats for damn sure. first thing load SPLV7 on your phone then flash a a complete ROM including radio and OS and then you should be all fixed and if that dont work there is a WHOLE thread just for BRICKED phones so go read like you said you whrere doing.... To me its sounds like you dont have a clue what your doing since you have done this to 2 phones and if you did have a clue your first thing would have been to load SPLv7
so go enjoy your not really bricked bricks
and if i remember right your one of the fools that was making fun af elf because he charge people like you to fix phones over at hofo... so take your problem over there or call elf for some one on one and eat some ****....
Click to expand...
Click to collapse
I gotta give you a lot of credit for that post. Me and a few other members had a bet that it would take less than an hour before the first idiot would surface, Thanks LOL. Who the hell is elf, and I would like to see the post that I had made making fun of anybody. If your gonna try to put someone on blast, back it up. Its assholes like you that a community can do without. Your a true idiot man. No1 needs you around here with that type of attitude. I dont blame you though, I blame your parents for having you. Your mom should have flushed the toilet when she had you then we wouldnt have a piece of **** like you in this world, shame on her. They should be ashamed of themselves for they way you have turned out.
I was able to do all the PDA functions prior to gettting my phones stuck in bootloader. That is were I am now. I got myself stuck in bootloader while trying to load HardSPLv7. I had not done any type of mods or upgrades prior to doing this.
Elf, I want you and that moron to post topics if me bashing you, I cant imagine me doing that. I am 30+ years of age, 3 children and a beautiful wife. I dont have a lot of time, nor do I have the time or care to flame other on these forums. I know that I look to people here and other forums more than they will need me. So please back up that what you are saying and I make sure that I make it an effort to put in my sig that I am an idiot and that you are god. If this it was gets you thru the day, so be it. Just back them comments up. Its a bad tag to put on someone.
My phone reads on tri color screen
Herm100
IPL-1.01
HERM1
SPL-1.40. Olipro
I can do anything other than see this bootloader screen.
(directed at the OP)
Instead of wasting your time replying to posts which are off topic why dont you answer the question posed in my reply...then we can get your two Hermes devices back to working order. Otherwise a mod will inevitably lock this thread and you will be back to square one.??
mrvanx said:
(directed at the OP)
Instead of wasting your time replying to posts which are off topic why dont you answer the question posed in my reply...then we can get your two Hermes devices back to working order. Otherwise a mod will inevitably lock this thread and you will be back to square one.??
Click to expand...
Click to collapse
When I recieved the phone there was no radio version displayed nor was there a protocol version. I also noticed that there was no IMEI that was displyed under the device info. While I was attempting to load the HardSPLv7, that is when I got stuck.
Bro I need serious step by step instructions on this. I've taken all that had been posted about this stuff and a have a pile of info about it. Theres not a whole lot I can do in the boot mode si Im trying to make sure Im doing the steps properly. The info I have given is based on the 8525, I'll work on the TYTN after. Thanks
My appologies.. I just checked HoFo.. You were not one of the idiots on there, as far as I can tell..
Sorry.
Click to expand...
Click to collapse
Appology accepted. Im not worried about man. I got other things to worry about.
Again can you PLEASE answer the questions in my reply?? I need an answer to all FIVE of them, a simple task which will give us the correct status of your device, even if it seems stupid...do it. (the questions im referencing to)
mrvanx said:
Again can you PLEASE answer the questions in my reply?? I need an answer to all FIVE of them, a simple task which will give us the correct status of your device, even if it seems stupid...do it. (the questions im referencing to)
Click to expand...
Click to collapse
1.SPL-1.40 Olipro
2.Dont know. Is there a way to check this now that I am in boot mode.
3.NO.
4.NO
5.Not sure. How can I find this out in the stage Im in
FLiPinoy9oNe6 said:
1.SPL-1.40 Olipro
2.Dont know. Is there a way to check this now that I am in boot mode.
3.NO.
4.NO
5.Not sure. How can I find this out in the stage Im in
Click to expand...
Click to collapse
OK, right you need to flash ANY ROm that contains an OS only, DO NOT try flashing a ROM which has a radio or SPL etc...
Follow my WM5 Downgrade Guide, this will take you through the steps necessary, select the relevant ROMs by HTC and Cingular (found in the wiki).
If that works as desired then update to HArdSPL v7 for both devices then flash a new radio.
mrvanx said:
(directed at the OP)
Instead of wasting your time replying to posts which are off topic why dont you answer the question posed in my reply...then we can get your two Hermes devices back to working order. Otherwise a mod will inevitably lock this thread and you will be back to square one.??
Click to expand...
Click to collapse
wont lock the thread since the guy needs help... but instead i will play janitor and clean it up... since some people will never learn to play nice...
More to the point, have you managed to fix them using the procedure i described?
mrvanx said:
More to the point, have you managed to fix them using the procedure i described?
Click to expand...
Click to collapse
No sir, Ive got two computers working on this right now. One to look at replies and the other to do the update. I had to get a bite to eat so Im back at it. Im trying to connect to sync but not working. Im reading up again on this Sd card deal and mtty so Im trying.
Yes ofcourse i forgot, once you have rebuilt the nbh to make an OS only update (OS,Ext ROM and the 2 splashes) you cant update as normal because there is no activesync connection...the sd card technique is what you need to do. After the device can get into OS and connect over activesync you can do the rest (HardSPL and Radio).
ok mrvanx, after using device monitor I fianlly got a connection and tried downloading a rom. Process goes thru and at 12% it stops and gives me the 262 error message. I do wat it suggest when getting the message with sof reset and try again, still same error.
flash from a damn SDcard and be done with this **** man... your wasting time half assing around... flash an OS.nb from your card and then do all that was told to you from above... this is the only way you will get your hermes working again
mrvanx said:
OK by the sounds of it you are definatly NOT stuck in bootloader.
firstly can you please answer the following questions from the wiki:
Please post the answers back here when you are done.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=9664136#post9664136
Sir please help me
1 HERM100
IPL-1.01
HERM100
SPL-1.40.Olipro
2 - rite now dont show while OS is on
3 yes OS loads ok
4 (yes) No GSM shows while boot
m 05
s 04 No GSM
B 06 D 3.57
5 I can't find as comm manager button confused
I have downloadet ATHE_wm6_x7500.zip file from another threat.
Is there anything that I should think of before I'l go on?
I know I need to take backup first.
But anything else?
And 2 more thing.
I know 3g talk is not working on wm6. Is there something else problem with it?
And is there possible to install the public release when it is released? (after I have installed this version)
Edit: Sorry for bad language.
I'm from Norway. And I spent to little time in my class
Before flashing your device:
Is it sim-unlocked and superCID ?
what is sim-unlocked and sid unlocked?
The phone is bought without simcard og something.
I can use whatever simcard I want
First Unlock
You will first want to download and install the program in this thread http://forum.xda-developers.com/showthread.php?t=315831. Make sure you read all the instructions and understand exactly what you will be doing. Then your phone will be ready to install WM6
I have read the post now.
Do I need to whatch the movie? Or is the steps readable from the exe fil when running it?
I'm in linux now and can't check the exe before rebooting.
Thanks for helping me
The steps are readable during the install but since you might not feel comfortable with english you can watch the video which always helps.
Thanks for the help. Read english is no problem. I'm just bad at writing it
First do the unlock program.
And then go for the rom file that I have mentions in first post?
Thanks again for the help
It failed after step 2. Black screen and nothing is working.
I got no error on step 1.
I have tryed to use cam button and reset to get it in debug?
And I get many colors and some info about firmware.
And there is standing USB.
Others are talking about a loading screen. Where can I find that?
Iminzilion said:
It failed after step 2. Black screen and nothing is working. I got no error on step 1.
I have tryed to use cam button and reset to get it in debug? And I get many colors and some info about firmware.
Click to expand...
Click to collapse
That multi-color screen sounds like the bootloader. Assuming you are now super CID (not sure because your message doesn't say what the "some info" is), you simply establish a USB connection between a PC and your 7500, download the WM6 ROM on to your PC, and execute it. This was exactly my experience (just got to step 1, black screen on step 2). Lot of posts on this, so make sure you do your research before proceeding. Hope this helps, and good luck.
thanks. love it. JUST LOVE IT.
I have fixed it before you posted. mmmm.
(l)
happy