Related
Ok...I have been through all the posts about upgrading etc. I still have a problem and I'm sure that I'm overlooking something....but I can't figure it out on my own. Here is what is happening (it does the same thing with every RUU that I've used...the DST fix...upgrading to WM6....etc)
1. I run the RUU and let it go through its routine (extract files, verify info on pc, etc.)
2. I check the box that says I have read the readme and click next
3. The next screen appears and it has the following steps:
Connect to the USB cable (check)
Establish an ActiveSync Connection (check)
Disable standby and hibernation on PC (check)
Make sure batter is > 50% (check)
Then I check the box and click next
4. I pick the update and click on the update button
5. I verify that I want to upgrade my phone from ROM verion x.xx.xxx to x.xx.xxx and click next
6. The program tells me that I am finally ready to update...and if I am sure I want to proceed to click next...so I click next
7. As soon as I click next...the progress bar comes up on my pc and my phone goes into standby mode (no bootloader...just standby). The progress bar never moves.
8. After a minute or two the RUU give me the ERROR [260]: Connection
9. I reboot my device and repeat steps 1-8
10. I reboot my device and my computer and repeat steps 1 - 8.
Now if I leave my device connected to the usb and close out the RUU after it gives me the ERROR [260], and then run the RUU again...when it is first verifying the information on my pc (before it asks any questions and before it tells me to connect my device) it will throw the device into bootloader mode. If I try to keep running the RUU while the device is in bootloader mode it give me the error that my device is not connected. I have tried and tried...maybe one of ya'll can help me. Thanks in advance
Chris
Some questions:
.) Is your desktop PC running XP or Vista?
If you have a firewall running, close it.
.) If you running Vista check this guide:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
.) What updates did you try to flash?
.) Did you install Olipros bootloader first?
gerald_s said:
Some questions:
.) Is your desktop PC running XP or Vista?
If you have a firewall running, close it.
.) If you running Vista check this guide:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
.) What updates did you try to flash?
.) Did you install Olipros bootloader first?
Click to expand...
Click to collapse
XP
No firewall
I tried to flash the WM6 from AT&T I assume its beta
and no did not install the Olipros bootloader
Ok...I think I found out how to do this...Ya'll can tell me if I'm screwing something up.
I go through all the steps listed above until it gets to the progress screen. When it gets there I manually put the the device in bootloader mode (Power, side ok, and reset). Once I do this...the progress bar starts moving. I will let you know if this works...
Hmmmm
Its not the way it should work but if it works its ok
You should have installed Olipros HardSPL first and then try to flash an official rom. If its working then something with your download is wrong.
What ROM is on there now?
Has the phone been CID unlocked?
Oli's CustomRUU is better, you may want to unpack the ROM and put the NBH in a folder with Oli's RUU and then do the upgrade.
BTW, gerald_s is right, you should not have to do that... what you may want to do is put the phone in Bootloader mode manually (while not connected to the PC), then plug in the USB, then start the RUU. That helps some people with 260 error.
I've got the same damn issue... it's driving me crazy. I had this occur when I flashed my Hermes100 from the stock version to Custel's. After about 15 starts and reboots it took. I'm now trying to get to Vp3G's 3.60 and it continues to give me the 260 error.
I am trying to figure out how to fomat my micro, but really hoping to find a solution over cable.
Hermes 100
IPL 1.04
SPL - 2.10 Olipro
Any suggestions?
You may be trying to flash a rom that includes the radio rom. What is your device? Is it possible that your device is a new x01ht with radio 1.14 and radio bootloader 0182? If yes, then you will get this error when you try to flash a rom with this method because during the flash it will be disconnected by the radio bootloader because it is not overwriteable. If you flash using the NBH file on the microSD, it will skip past radio and radio boot and just flash the other parts of the file.
mikebraeuer said:
I've got the same damn issue... it's driving me crazy. I had this occur when I flashed my Hermes100 from the stock version to Custel's. After about 15 starts and reboots it took. I'm now trying to get to Vp3G's 3.60 and it continues to give me the 260 error.
I am trying to figure out how to fomat my micro, but really hoping to find a solution over cable.
Hermes 100
IPL 1.04
SPL - 2.10 Olipro
Any suggestions?
Click to expand...
Click to collapse
If you are running windows XP, just connect the card to the computer, open MY COMPUTER, right-click the removable disk that is your microSD and then click format. Default in windows xp is to format using FAT32 filesystem which is perfect.
The thing is... if you dont know how to format a drive in Windows, should you be flashing your device yourself?
Which Solution???
I've got a Softbank X01HT with:
S/N: HT639
SuperCID <--- result of checking by mtty
IPL: 1.04
SPL: 2.10Olipro
GSM: 1.47.00.10
OS: 3.54.07 WWE
I tried to flash with new Schap 3.54c but the process would not be done coz ERROR 262 or ERROR 302. Fortunately, after failure of flashing, my device is still normal running. Then I tried to flash radio 1.51.00.10 but I got the same above. Once again, I have just tried to flash splash screen and I got the same result too. It mean my device can not upgrade anything !
Anybody here show me a solution that help my device to become a normal device, I mean it will be able to flash anything ROM as it would be! Don't tell me READ and READ, I had read so much . And don't tell me use MTTY again SPL1.01MFG, I think that is a final solution
Wantoknow said:
I've got a Softbank X01HT with:
S/N: HT639
SuperCID <--- result of checking by mtty
IPL: 1.04
SPL: 2.10Olipro
GSM: 1.47.00.10
OS: 3.54.07 WWE
I tried to flash with new Schap 3.54c but the process would not be done coz ERROR 262 or ERROR 302. Fortunately, after failure of flashing, my device is still normal running. Then I tried to flash radio 1.51.00.10 but I got the same above. Once again, I have just tried to flash splash screen and I got the same result too. It mean my device can not upgrade anything !
Anybody here show me a solution that help my device to become a normal device, I mean it will be able to flash anything ROM as it would be! Don't tell me READ and READ, I had read so much . And don't tell me use MTTY again SPL1.01MFG, I think that is a final solution
Click to expand...
Click to collapse
Have you tried flashing with your microSD?
Kevbodian said:
Have you tried flashing with your microSD?
Click to expand...
Click to collapse
I forgot to tell that, I had flashed through extra memory card yet, and could be done!
But I wanna flash ROM against CustomRUU through MS Active Sync as I had used before. Can you help me
i have a problem very similar to Chris. when i check the box "yes activesync is syncronised", and then the progressbar shows up and the phone goes into standby.
i've turned standby of in powermanagement options.
my os is XP
i use active sync v4.5
and this is first time i try this.
i've read something about this bootloader, i can get there but then i cannot sync with active sync. so i kinda stuck.
have been searching the forums and this was the same problem as mine but i don't understand your solutions.
//KufrA
--Problem solved--
i did all things without activesync,
1. start phone in bootloader
2. do the install
3. wait 0% to 100%, and done.
is there a problem with active sync or why do i have to do anything with it at all?
First of all, Hi!
Now, how do I clear my nike to the point where it has nothing on it?
I need to do this because I got stuck in the process of flashing it with HARDSPL 1.22 that I need in order to flash a new rom!
I tried everything, I followed the guide on how to do HardSpl, but got stuck at step 8 of the tutorial, the process bar is constantly at 0%, and followed by recovery steps!
I do not need them because everything works just fine, only with the original rom still on!
So I want to flash a rom, but am unable to!
Please help me!
Even if my solution is deleting everything ( I do not mean a Hard Reset- Did that 10 times ) and starting from 0!
But this is one thing I never did, and do not know where to start or what to do!
So any good soul out there willing to help, please do so!
Thanks in advance!
Ok let's try to help, can you tell us more details about your phone, model 16 or 20 keys, rom and radio.
If this is not clear just send me a pm
Regards Rataplan
Thanks, mine is a 16 key version.
Radio 1.65.28.25
Rom: 2.09.405.1
Rom date: 30.08.2008.
Protocol version: 25.98.40.07H
And I did the first few steps of flashing the HardSpl
and now it says SPL 1.22
and further more, on start up screen it says "TEST ONLY NOT FOR SALE"
BTW: I was looking of flashing your ROM but as I said, no can do!
HELP
Ok from what I see it looks to me that you already flashed a rom, just one question is it telling SPL 1.22 or SPL 1.22 Hard
just SPL
That is my problem!
Any solution!?
You need to start all over again, do you have a Niki, you can see that under the battery
Okay just read your post in the other thread, that cleared a lot of things, just do it all over again and use 1.15 instead of 1.22 maybe that will work for you, btw from what I can see you didn't do anything wrong, I also flashed directly the 1.22 and from me that works.
Just keep me informed how it goes.
Regards
The phone is niki100
There is no simlock!
What do I need to do?
Refer me to a tutorial, or just tell me everything here?
And thank you for the help so far!
Edit:
OK, I did what you said, and so far works!
But, could you please explain to me a couple of things!
1. download the attached files DONE
2. REMOVE SIM and SD CARDS !! DONE
3. connect usb cable DONE
4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!) DONE
5. after a few seconds "USB" appears on the display DONE
6. unplug and replug the usb cable DONE
(OPTIONAL, better to skip it! step 7. if you only want to test the sspl try flashing the attached splash screen by running ROMUpdateUtility.exe from flash-splash-niki) SKIPPED
8. you can now flash the hardspl-1.15mfg-nike.nbh by running ROMUpdateUtility.exe from flash-uspl-niki
AND NOW here is my question, in the file FLASH-USPL-NIKI there is a uspl-1.16-nike.nbh file, but here in this step it says to flesh the 1.15mfg(wich I downloaded), so do
i have to delete the 1.16 and replace it with the 1.15mfg or what?
9. after installing the hardspl you can flash any rom (rom cook project here)
Okay I think I kow what you mean, you must flash the 1.15mfg, do not copy it to your phone, you don't have to delete the 1.16.
EUREKA, it worked!
Flashed your F01-10 rom!
Now I only did the 1.15 HARD Spl
Please suggest to me a radio?
I tried flashing the Radio_1.71.09.01_25.75.40.02K and it got to 100% and then said FLASH WRITE ERROR, so I was stuck wit the old radio!
AND OMG, THE ROM IS WONDERFUL
Thank you so very very much!
I need help, i have flashed a rom but now my niki stops at the radio details. It doesn't boot to windows mobile.
How do i reflash a working rom now?
How long have you waited before taking out the battery?
It takes a while to load!
It takes a while to load yes, but 5-10 minutes is to long for it to start to boot.
It has passed 1 hour now.
Anyone knows how can i fix my niki?
2 die 4 said:
EUREKA, it worked!
Flashed your F01-10 rom!
Now I only did the 1.15 HARD Spl
Please suggest to me a radio?
I tried flashing the Radio_1.71.09.01_25.75.40.02K and it got to 100% and then said FLASH WRITE ERROR, so I was stuck wit the old radio!
AND OMG, THE ROM IS WONDERFUL
Thank you so very very much!
Click to expand...
Click to collapse
You're welcome for the rom, about the radio if you want to try the 1.71 radio you have to go back to an older radio before you flash the 1.71.
I suggest to use a 1.5.. radio, that will do the trick.
For now you can always put Hardspl 1.22 on your phone, some people are recommended that if you flash a wm 6.5 rom, personally I don't see any difference.
Btw The radio I use is 1.65.29.22
Regards
masterxiter said:
It has passed 1 hour now.
Anyone knows how can i fix my niki?
Click to expand...
Click to collapse
Hmm, that's a long time without a phone , did you already try a hardreset, just turn the phone off, and turn it on by pressing the power and the send and end key on the dame time, I think that will do it.
Just keep me informed.
Regards
Rataplan said:
Hmm, that's a long time without a phone , did you already try a hardreset, just turn the phone off, and turn it on by pressing the power and the send and end key on the dame time, I think that will do it.
Just keep me informed.
Regards
Click to expand...
Click to collapse
Yes it enters restore mode. If i have the usb cable, when the restore finishes, on the pc it says "unrecognized usb" / Unknown device. I reboot the phone and its the same.
masterxiter said:
Yes it enters restore mode. If i have the usb cable, when the restore finishes, on the pc it says "unrecognized usb" / Unknown device. I reboot the phone and its the same.
Click to expand...
Click to collapse
Hmm, okay this will be diffucult, I've read you flashed a rom and after that you get this issue, just a few questions did you cid unlock your phone, and is the bootloader still there. (that is the 4 coloured screen with the spl info)
masterxiter said:
Yes it enters restore mode. If i have the usb cable, when the restore finishes, on the pc it says "unrecognized usb" / Unknown device. I reboot the phone and its the same.
Click to expand...
Click to collapse
hey dude
y dont u flash the original rom of htc nike once and then retry?
Rataplan said:
Hmm, okay this will be diffucult, I've read you flashed a rom and after that you get this issue, just a few questions did you cid unlock your phone, and is the bootloader still there. (that is the 4 coloured screen with the spl info)
Click to expand...
Click to collapse
Yes i have both.
I allready change those 4 colors for an image, lol but ok i have the spl info:
M 04
B 04
R 1.65.28.25
G 25.98.40.07W
D 2.12
What happened was, i had an working cooked rom flashed in my phone. I was working with it for about a month.
yesterday i flashed with another one. It got me 100% rebooted and voilla doesn't pass the spl boot.
masterxiter said:
Yes i have both.
I allready change those 4 colors for an image, lol but ok i have the spl info:
M 04 R 1.65.28.25
B 04 G 25.98.40.07W
D 2.12
Click to expand...
Click to collapse
Ha ha yeah that would be nice if we could replace that for an image.
Okay, connect it to your computer when you're on the 4 coloured screen and see if it connect then, in the phone you see serial changing in usb, if yes just flash your original rom.
sorry if this shouldnt be here, but i really cant figure this out. Im using a united states HD2 with 1024, i have it connected via usb with active sync then i run HSPL2 and then it restarts to the bootloader, and it allows me select the HSPL 2.08 and then i run it and it just sits there and nothing happens. =( any help?
oops.. didnt mean for this to go here... this can be deleted @[email protected]
After you select spl 2.8, it goes through a short process and then it asks you:
Do you see "we hacked this"? Now if you do, all is well and just because it sits
there after the above process, do not be alarmed, just take the battery out, put back in after 15 seconds. But if the hack process doesn't happen, you have to go into bootloader(volume down,press power briefly) and run HSPL3 again.
Hope this helps you.
Good Luck
niiza said:
sorry if this shouldnt be here, but i really cant figure this out. Im using a united states HD2 with 1024, i have it connected via usb with active sync then i run HSPL2 and then it restarts to the bootloader, and it allows me select the HSPL 2.08 and then i run it and it just sits there and nothing happens. =( any help?
Click to expand...
Click to collapse
HSPL2 doesn't work on TMo US device. Run HSPL3
Hi. I wanted to install Android on my HD2 but for that I need radio versions 2.08 - 2.12. And currently my radio version is 2.06 so I wanted to flash it to 2.10 or one of them between 2.08-2.12. For this I used Custom RUU. Everything went well untill it said installing, and it went to 4% and then suddenly my phone reboots and then on my computer it says "Error 270. The image file is corrupted. Please check your Update Utility."
Well what have I done wrong?
Nilee said:
Hi. I wanted to install Android on my HD2 but for that I need radio versions 2.08 - 2.12. And currently my radio version is 2.06 so I wanted to flash it to 2.10 or one of them between 2.08-2.12. For this I used Custom RUU. Everything went well untill it said installing, and it went to 4% and then suddenly my phone reboots and then on my computer it says "Error 270. The image file is corrupted. Please check your Update Utility."
Well what have I done wrong?
Click to expand...
Click to collapse
Did you have install HSPL on your device?
Yes I have installed HSPL. But if you have installed HSPL, is it then supposed to show "HSPL" somehere on the bootloader screen? Because on mine it doesn't.
But then that's weird because I did install HSPL and it even said succesfull. But still I get the same error when I try to flash the radio.
Go into bootloader by holding the VOL- (down) button, while pressing the End Call button to boot up your phone from being all the way turned off.
Check on your bootloader (tri-color) screen for the letters HSPL and the name Cotulla.
If these things are not present, then for some reason you don't have HSPL installed.
If this is the case, stay in bootloader, and re-run HSPL, and then check again in your bootloader to make sure you have HSPL, and then re-flash the custom_ruu
Chances are it just didn't take because your phone didn't have HSPL for whatever reason. You might want to re-download the radio ROM just to be sure you didn't get a corrupted/incomplete download.
Good luck
oops ignore plz
but what a shame that my pc even doesnt play with custom ruu.nothitng happen when i click.i have everything installed.
huggs said:
Go into bootloader by holding the VOL- (down) button, while pressing the End Call button to boot up your phone from being all the way turned off.
Check on your bootloader (tri-color) screen for the letters HSPL and the name Cotulla.
If these things are not present, then for some reason you don't have HSPL installed.
If this is the case, stay in bootloader, and re-run HSPL, and then check again in your bootloader to make sure you have HSPL, and then re-flash the custom_ruu
Chances are it just didn't take because your phone didn't have HSPL for whatever reason. You might want to re-download the radio ROM just to be sure you didn't get a corrupted/incomplete download.
Good luck
Click to expand...
Click to collapse
Ok, then my HSPL isn't installed. But that's real' weird. Because when I install HSPL everything goes okay and it even says "Succesful" etc. I've tried to install HSPL for like 4 times and it always says installation completed, but however it doesn't show anything like HSPL or Cotulla on the bootloader screen. And I do have SPL 1.42.0000, which is required to install HSPL. And I also disabled my anti-virus so what have I done wrong?
By the way: When I go to bootloader mode it always goes to a grey screen first with blue words "Loading" and after a few seconds it says "Not allow" and after that it finally goes to bootloader mode. Is it supposed to be like that or what's wrong with this?
Nilee said:
But then that's weird because I did install HSPL and it even said succesfull. But still I get the same error when I try to flash the radio.
Click to expand...
Click to collapse
did you use hspl3 and not changing the dropdown from its default 2.08.0000 which is stock. run it again and make sure the dropdown ends .hspl
saurabh88 said:
but what a shame that my pc even doesnt play with custom ruu.nothitng happen when i click.i have everything installed.
Click to expand...
Click to collapse
anti virus program give you a hit when you first downloaded it?
many times the file gets disabled so you need to download it again, even if you turned off the av or told it to allow customruu.
also right click and "run as administrator" even if you are logged in as admin.
Nilee said:
By the way: When I go to bootloader mode it always goes to a grey screen first with blue words "Loading" and after a few seconds it says "Not allow" and after that it finally goes to bootloader mode. Is it supposed to be like that or what's wrong with this?
Click to expand...
Click to collapse
there's a leoimg on your sd card (or your phone thinks there is) but it isn't starting. remove the card.
Ok, well I used HSPL 2 and it installed correctly. HSPL 1 however didn't work for me. After I installed HSPL 2 it clearly said something like HSPL 2.08 on the bootloader screen. So I tried to flash to a new radio with CustomRUU. It all went well, untill it was installing and suddenly said: CONNECTION ERROR CRITICAL ERROR or something like that. It also said that the USB cradle or something was unconnected, however it was still connected and I didn't even touch it. After that my phone rebooted and went into bootloader mode again. The weird thing is that it doesn't say HSPL 2.08 anymore. Now t says SPL 1.42 again so the HSPL went away or something. I tried to reboot the phone (using the red button at the back of the phone) but it went into bootloader mode again. Well, all it does is go into bootloader mode. I can't even get to the normal thing again, only the bootloader mode. What the hell have I done wrong?
By the way: If I'm in bootloader mode all it says is this:
HX-BC
SPL-1.42.0000 XE <-- (before this it still had HSPL but now it went away)
MicroP-Wrong Platform (0x0)
MicroP(TOUCH) 0x30
Can anyone help me? Have I bricked my phone??
Just a question/suggestion,
Did you already thought to use/install the latest stock ROM 3.14 !?
the reason of this suggestion is this stock ROM have Radio 2.15.50 already integrated (no need of HSPL) and it's compatible with Android.
Well I didn't, I will try to do it. But I don't know how. Because my phone is still only able to get into bootloader mode. And it won't even charge it's battery..
So do I have to put the Stock ROM on my SD now, and flash it from the SD card?
I don't even know how much battery my phone still has..
Nilee said:
Well I didn't, I will try to do it. But I don't know how. Because my phone is still only able to get into bootloader mode. And it won't even charge it's battery..
So do I have to put the Custom ROM on my SD now, and flash it from the SD card?
I don't even know how much battery my phone still has..
Click to expand...
Click to collapse
You can flash stock ROM when you are in bootloader mode.
kurt-willems said:
You can flash stock ROM when you are in bootloader mode.
Click to expand...
Click to collapse
How?
By the way, my phone is in bootloader mode but it won't connect to the computer using a USB cable, it also won't charge it's battery.
Nilee said:
How?
By the way, my phone is in bootloader mode but it won't connect to the computer using a USB cable, it also won't charge it's battery.
Click to expand...
Click to collapse
Ok, then rest you the flashing over SD.
Make attention to use the right stock ROM; use your S/N to get access at your stock ROM on the HTC webpage.
deleted please ignore
Ok so I just extract the .exe and take the .nbh file of it and rename it to leoimg.nbh and put it on SD and start flashing?
Nilee said:
Ok so I just extract the .exe and take the .nbh file of it and rename it to leoimg.nbh and put it on SD and start flashing?
Click to expand...
Click to collapse
Yes; that"s it.
Hi all,
I've installed the latest official ROM (World Wide English (WWE) 3.14.405.2) downloaded from http://forum.xda-developers.com/showthread.php?t=623283 and also co0kie home tab 2 from http://forum.xda-developers.com/showthread.php?t=792303 on my HD2.
At the beginning everything OK but when time goes on (right now it is second week) it starts to slow down to almost freeze in several cases!! any idea?
By the way, 80% of program memory is always occupied!
Thanks
Go into bootloader, look at spl line.
if it DOESN'T say 3.03.0000 or 3.03.hspl then that's the problem,, use hspl4 and choose either of those.
Thanks, but could you help me more detailed on what you recommended? I've no idea what you're talking about?! Sorry for that
I'm not expert about this.
By the way, would this method remove all information (i.e. contacts, sms and ...)?
Thanks in advance
power off phone
press, hold and KEEP HOLDING volume down key
press and release power
KEEP HOLDING VOL DOWN
when striped coloured screen appears, that is bootloader, , now you can let go of volume down.
What does the 'spl' line say?
It says:
SPL-1.42.HSPL XE
What should I do now?
See? If you had read and understood post 2 it would be fixed by now
so you haven't got the right spl to run 3.14, just like I mentioned in post 2, it needs to be 3.03.xxxx for 3.14 and you have 1.42.xxxx
Enter bootloader, run hspl4 choose 3.03.0000 or 3.03.Hspl and reboot.
Thanks, but the problem is I've no idea "how to run hspl4"!!! Should I download something and install it on my HD2?
I've found this link (http://forum.xda-developers.com/showthread.php?t=609477) and I think it has a full guide for this!
Thanks for your help,
After installing this new HSPL4 should I install the ROM again?
vivid80 said:
Thanks, but the problem is I've no idea "how to run hspl4"!!! Should I download something and install it on my HD2?
I've found this link (http://forum.xda-developers.com/showthread.php?t=609477) and I think it has a full guide for this!
Thanks for your help,
After installing this new HSPL4 should I install the ROM again?
Click to expand...
Click to collapse
All you have to do is put hour phone into bootloader (multicolor screen) by holding the vulume down button down as your HD2 is booting up. Connect your HD2 via USB to the computer wait for the computer to install the drivers if they are (if they are not already) then you will see the Serial change to USB in the white bar of bootloader. When you see USB right click on the HSPL.exe and select run as administrator. The DFT utility will ask what version you want to install, it will be on 2.08 as default. Click on the little arrow to make the drop down box come down and select either 3.03.0000 or 3.03. The .0000 is regular SPL and the 3.03 is HSPL. And no you do not have to reflash the ROM but I would sugest a hard reset just to be safe.
Thanks guys,
Now the memory usage dropped down to below 50%!!! Let's see if there would be freezes or not