after playing with x10 mini (framework-res) i kill my phone.... now i want to repait it by pc comparsion but i have small problem i can`t switch off phone if i push midle button and power for few seconds phone vibrate , but after this phone start again ... i must "switch off , press back and insert usb" .... any idea when i make repair procedure ?
thanks
solved , patient patience and patience (and patience one again , after hour trying home + power with combination of back buton (one minute minimal) and usb cable is repair done ...
Related
the memory i´ts full so their not pass the splash screen.someone help me please to make a hard reset.i use the win 6.1 s.o thanks.
Turn Off The Phone , Keep Both Softkeys Pressed And Press The Power Button (keep Softkeys Pressed) And A Message Will Appear . Just Follow The Instructions
they not work
i try but not result,i pressed about 2 or 3 minutes but they not pass the screen "mobile operator".i think they do not have suficient memory to start the s.o.because before reboot the phone the memory avaiable it´s a 16 kbites.i think the problem it´s the memory and a hard reset resolved the problem but this group keys not result.i start to belive i´m fuc... hum hum hum!!!
reset oxygen solution
finaly i solved the problem.so for everyone they have this problem you first press the power button and wend the keyboard make light you stop press power button and press both sofkeys and not stop before appear the blak screen so you stop press the softkeys and press only the call key and wait a few moments,the welcome screen appears.the desespere hits a god incentive.tanks to everyone they try to make this site betther day by day and to florinox to.
Ok i got my self stucked in se logo and i cant access recovery cause recovery's version was invalid and i reboted.......
so thats i did and it worked 4 me
1)connect phone to pc
2)do a hard reset(press power + middle button untill it vibrates)
3)after the se letters appear press power button + middle button and after that immediatly press back button and a green light(in notification will apear)
ok now you are in flash mode
connect your phone into pc companion go to support etc and software update
when you will press next and that it will ask you (after a minuite ) to unmount usb and shut down your phone you only unmount it
so now 1) conect the usb cable into your pc
2)press power + middle button and then connect the usb into ur phone immediately!
3)just continue your update and now you have android 2.1 and a fuctionable phone ......
but i will be still in danger 'cause i will continue updates!
hope it helped you! if it did hit the thx button <3
edit: i found this sollution by reading different posts and i bring them together in one (i did what i wrote and my phone works now)
devilakos said:
Ok i got my self stucked in se logo and i cant access recovery cause recovery's version was invalid and i reboted.......
so thats i did and it worked 4 me
1)connect phone to pc
2)do a hard reset(press power + middle button untill it vibrates)
3)after the se letters appear press power button + middle button and after that immediatly press back button and a green light(in notification will apear)
ok now you are in flash mode
connect your phone into pc companion go to support etc and software update
when you will press next and that it will ask you (after a minuite ) to unmount usb and shut down your phone you only unmount it
so now 1) conect the usb cable into your pc
2)press power + middle button and then connect the usb into ur phone immediately!
3)just continue your update and now you have android 2.1 and a fuctionable phone ......
but i will be still in danger 'cause i will continue updates!
hope it helped you! if it did hit the thx button <3
edit: i found this sollution by reading different posts and i bring them together in one (i did what i wrote and my phone works now)
edit 2: plz can you send me a beer i am so thirsty
Click to expand...
Click to collapse
Does this work for xperia x10 mini pro ?
http://forum.xda-developers.com/showthread.php?p=10885406#post10885406
just download ftf file for your x10 mini pro.. choose one of them and flash it
you just connect your phone (turn off and press back button and than connect) via usb and flash it
Yesterday i've bought ONN M6 PC TABLET.
During exploring it i tried the pattern password which i forget it and phone now is locked.
I tried every thing to reset it like:
- click many times in the small button in the small whole after (- volume) button which is reset button but no thing happen even when tablet is open or shut down.
- try install the firmware but i came to the step when we should hold the (- volume) and then active usb cable and then click 10 times in (power) button then release the (- volume) but no recover mode appear and no device appear in the pc
- i also tried hold the (+volume) button and power while open but no thing happen.
so please help me.
thank you.
help how can i turn off this unit? it shows the Sony Ericsson name in the Screen
i bricked it..and i want to update it using SEUS but i should turn it off but i tried to hold the button but nothing happened..
i hope you could help me about this..thanks:highfive:
P.S. Newbie :crying:
connect your phone with SEUS and wait untill u see detecting phone after the model choice screen...... once it asks u to turn off the phone , press home button and power button u will hard reboot the phone quickly hold back button and connect usb u will have no problem
alienwrz said:
connect your phone with SEUS and wait untill u see detecting phone after the model choice screen...... once it asks u to turn off the phone , press home button and power button u will hard reboot the phone quickly hold back button and connect usb u will have no problem
Click to expand...
Click to collapse
I have same problem but i cant flash my X10mini nothing happens on flashtool pls help me!
Hello.
I have a U20i (x10 mini pro) and i installed a custom rom (sonystyle v1.1) and i wanted go to stock rom via reperation in pc companion.
The problem is that i cant enter flash mode any more. I've tryed in many ways (take out the battery , plug the cable and insert the battery with holding "back" key) but phone always boot and on the screen there is a charging battery and a yellow led
install SEUS and turn off phone on 30 sec witout USB cable, press and hold back key and then plug cable (you must hold pressed back key all times) program will tell you when u can release back key.
Still the same only charging battery icon and yellow led
Clean your USB connector from your cable, and dont forget to:
Pull of the battery for 5 sec a insert the battery, your phone must be disconnected from USB. Start SEUS and follow the steps, connect your phone holding back key.
Still nothing .
Once i entered flash mode. I connected the cable with holding back button and when the display turn on (before SE text) i pulled battery and inserted it quickly still holding back button. But when i want to do that again it aint working.