Hi Xda Members,
I'm using HTC HD2 for 6 months.
I've installed Hard SPL first. Then i've upgraded my Radio Rom from 2.07 to 2.12. Then I've installed ChuckyRom and later I changed my rom to EnergyRom.
Now, I'm going to send my HTC HD2 to service and I want to send it with factory settings because of warranty issues.
I need to know;
1. How can I change the boot screen to original one? (The first one which seems when I turn on the phone; it shows ChuckyRom's boot screen now.)
2. How can I erase every clue about custom roms after flashing the shipped rom? Is it possible for them to understand that I had flashed a custom rom before?
3. When I press Volume Down + Start Button i see LEOIMG.nbh and other stuff. Is it possible to erase them? (I've removed the LEOIMG.nbh from SD Card already.)
If you help me I'll be grateful.
Tatenen said:
Hi Xda Members,
I'm using HTC HD2 for 6 months.
I've installed Hard SPL first. Then i've upgraded my Radio Rom from 2.07 to 2.12. Then I've installed ChuckyRom and later I changed my rom to EnergyRom.
Now, I'm going to send my HTC HD2 to service and I want to send it with factory settings because of warranty issues.
I need to know;
1. How can I change the boot screen to original one? (The first one which seems when I turn on the phone; it shows ChuckyRom's boot screen now.)
2. How can I erase every clue about custom roms after flashing the shipped rom? Is it possible for them to understand that I had flashed a custom rom before?
3. When I press Volume Down + Start Button i see LEOIMG.nbh and other stuff. Is it possible to erase them? (I've removed the LEOIMG.nbh from SD Card already.)
If you help me I'll be grateful.
Click to expand...
Click to collapse
Normally, you should post this in either the HD2 ROM or the HD2 Q&A sub-forum...
If you've read the HSPL/HSPL2 thread, you would've seen this:
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
So basically: download the right official ROM from HTC for your device (this means: right language/vendor), rename to leoimg.nbh and flash from SD-card.
After this, just format your SD-card (or remove it, you shouldn't send it in normally) and you're done
Grtz,
Degake
Thank you degake.
When this progess is done, is it possible for to understand that I had flashed a custom rom before?
Will the boot screens return to default ones?
Tatenen said:
Thank you degake.
When this progess is done, is it possible for to understand that I had flashed a custom rom before?
Will the boot screens return to default ones?
Click to expand...
Click to collapse
no- once you have placed an official rom and have removed hspl everything is back to stock (boot screen and all). no one will be the wiser.
jsmccabe78 said:
no- once you have placed an official rom and have removed hspl everything is back to stock (boot screen and all). no one will be the wiser.
Click to expand...
Click to collapse
Exactly.
If you flash the shipped ROM this way, HTC won't be able to tell if there was anything else installed prior to this flash (as the whole internal memory got wiped before installing the shipped ROM).
Grtz,
Degake
should he task 29 before doing this flash?
miller710 said:
should he task 29 before doing this flash?
Click to expand...
Click to collapse
not necessary. just flash stock rom and then remove hspl- now is back to factory and ready to be sent in.
Related
Hi Xda Members,
I'm using HTC HD2 for 6 months.
I've installed Hard SPL first. Then i've upgraded my Radio Rom from 2.07 to 2.12. Then I've installed ChuckyRom and later I changed my rom to EnergyRom.
Now, I'm going to send my HTC HD2 to service and I want to send it with factory settings because of warranty issues.
I need to know;
1. How can I change the boot screen to original one? (The first one which seems when I turn on the phone; it shows ChuckyRom's boot screen now.)
2. How can I erase every clue about custom roms after flashing the shipped rom? Is it possible for them to understand that I had flashed a custom rom before?
3. When I press Volume Down + Start Button i see LEOIMG.nbh and other stuff. Is it possible to erase them? (I've removed the LEOIMG.nbh from SD Card already.)
If you help me I'll be grateful.
Tatenen said:
Hi Xda Members,
I'm using HTC HD2 for 6 months.
I've installed Hard SPL first. Then i've upgraded my Radio Rom from 2.07 to 2.12. Then I've installed ChuckyRom and later I changed my rom to EnergyRom.
Now, I'm going to send my HTC HD2 to service and I want to send it with factory settings because of warranty issues.
I need to know;
1. How can I change the boot screen to original one? (The first one which seems when I turn on the phone; it shows ChuckyRom's boot screen now.)
2. How can I erase every clue about custom roms after flashing the shipped rom? Is it possible for them to understand that I had flashed a custom rom before?
3. When I press Volume Down + Start Button i see LEOIMG.nbh and other stuff. Is it possible to erase them? (I've removed the LEOIMG.nbh from SD Card already.)
If you help me I'll be grateful.
Click to expand...
Click to collapse
I am using Energy rom, couple of months ago I sent my phone back for warranty. I just downloaded the latest rom from HTC site. If I remember correctly it changes hard spl and radio, but i'm not sure of that. Perhaps you need to install normal spl with the spl tool.
I know for sure that it also changed my boot screen to stock(with the red Vodafone boot screen for NL).
Hope this'll help you out a bit! Maybe this'll help too: http://forum.xda-developers.com/showthread.php?t=713977
Just flash a stock ROM from SD card. See forum.xda-developers.com/showthread.php?t=609477
I need to sent my hd2 to HTC for warranty purposes. I'm a newbie in this and i know how to uninstall hspl2. Just wondering about the radio rom, do i flash back to original radio rom first before uninstall hspl2 or can i just flash it straight using the microSd method. Thanks
jingwen91 said:
I need to sent my hd2 to HTC for warranty purposes. I'm a newbie in this and i know how to uninstall hspl2. Just wondering about the radio rom, do i flash back to original radio rom first before uninstall hspl2 or can i just flash it straight using the microSd method. Thanks
Click to expand...
Click to collapse
Flashing the original stock ROM over SD will remove HSPL, will bring your radio on the version who is integrated in stock ROM and brings you back on stock settings.
So the only thing you need to do is flashing over SD
thanks alot!
can some body help me how to flash over the sd ???
i just flash the elegancia rom and ryt now i need to get back to the original windows mobile that i bought it,,
any solutions ???
thx before !!!
safio911 said:
can some body help me how to flash over the sd ???
i just flash the elegancia rom and ryt now i need to get back to the original windows mobile that i bought it,,
any solutions ???
thx before !!!
Click to expand...
Click to collapse
1) Download the correct Stock ROM from the HTC Webpage by using your S/N. (you will get a RUU_Leo_xxx_x.XX.xxx.x_Radio_xx.xx.xx.xU_x.xx.xx.x_LEO_Ship file.)
2) Right click on the RUU_Leo_xxx_x.XX.xxx.x_Radio_xx.xx.xx.xU_x.xx.xx.x_LEO_Ship file and select extract with 7Zip/WinZip
3) Prepared your SD-card (use a 2 or 4GB SD no bigger) and format it by FAT32
4)Take the "RUU_signed.nbh" from it and copy it to SD card.
5) Rename the "RUU_signed.nbh" to "leoimg.nbh"
6) Reset the device while pressing the volume down button
7) Follow the instructions mention on your screen
i've done that. worked so far to flashed my HD2 without errors.
but after i come to home screen my HD2 acts like someone's permanently pressing VOL(-). don't matter what i press or do. i tried a lot of different ROMs, flashing by cable or with SDcard, task29, diff. radio, flash hspl new. all that.
i'm going crazy 'bout that :'(
any idea what i could do?
thanks!
dj_memory said:
i've done that. worked so far to flashed my HD2 without errors.
but after i come to home screen my HD2 acts like someone's permanently pressing VOL(-). don't matter what i press or do. i tried a lot of different ROMs, flashing by cable or with SDcard, task29, diff. radio, flash hspl new. all that.
i'm going crazy 'bout that :'(
any idea what i could do?
thanks!
Click to expand...
Click to collapse
Get start to give us some more device information.
- witch Rom version do you have now?
- Radio version?
- SPL/HSPL version?
i tried to flash the latest official HTC ROM: "HTC_HD2_5CRUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship" to get shure its no ROM problem.
Radio i had on my HD2 was: Radio_Leo_2.15.50.14 witch worked well for the last 3 months!
HSPL is: 2.08HSPL
i also had to say that before that i flashed gingerbread on NAND. working fine (exept battery drain and the default known ROM problems
an there i had also a VOL (-) problem (see http://forum.xda-developers.com/showthread.php?t=906881)
because of that i wanted to change back to WM.
and thats the state know!
i first thought my bad usb-connector causes flash problem (i found 2 bad made conntacts under the microscope), thats why i flashed wia SD now.
dj_memory said:
i tried to flash the latest official HTC ROM: "HTC_HD2_5CRUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship" to get shure its no ROM problem.
Radio i had on my HD2 was: Radio_Leo_2.15.50.14 witch worked well for the last 3 months!
HSPL is: 2.08HSPL
i also had to say that before that i flashed gingerbread on NAND. working fine (exept battery drain and the default known ROM problems
an there i had also a VOL (-) problem (see http://forum.xda-developers.com/showthread.php?t=906881)
because of that i wanted to change back to WM.
and thats the state know!
i first thought my bad usb-connector causes flash problem (i found 2 bad made conntacts under the microscope), thats why i flashed wia SD now.
Click to expand...
Click to collapse
First of all remove your HSPL; HSPL and stock ROM 3.14 isn't compatible and create lot of issues/problems.
allready done (by flashing via SD) ?!
as written here:
http://forum.xda-developers.com/showthread.php?t=623402
for me it looks like WM is missing a sound file or something like that, and thats why it permanetly switch down VOL.
because i get a "file missing" windows for a few ms, but there is no concret file name so i don't now really whats missing
is this possible?
i solved it!
I've got no idea why but its working!
I started the SD update process once more (the third time now
(nothing changed!)
what I've done is i waited after reboot till it locked it selves (screen black)
but i think that made no difference
probleme there again
once more bad news.......tomorrow mornig my HD2 is going crazy again :'(
actual state: my VOL(-) button isn't working.
so i think the real problem was my (know) defect VOL (-) button.
sometimes working sometimes not....
Hi everybody,
Well yesterday i figured out that i could update my rom.
I started to look the Arthemis thread to find out what's new.
I saw SSPL and the 3.14 rom.
I downloaded the 3.14 rom and i installed it.After that i took the SSPL and the Arthemis V42 Rom and tried to install it. No success.
After that i took the energy rom to install it and it works but i still have the 3.14 rom display instead of the energy rom.
So right now i'm a little bit stuck cause i don't know what to do
Here's my specs:
SPL-2.08.HSPL 8G XE
Systeme version : 5.2.21684 (21684.5.3.10)
Manila version : 2.5.20191914.0
Rom version: 09 November 2010 FRE
Radio Version: 2.12.50.02_2
Protocol Version : 15.40.50.07U
So i'm asking you guys a little help please to put energy or new arthemis back in my phone.
Thanks for your help
Ps: ( I need help on how to put my phone back to normal i'm a little confused about SSPL and the 3.14 rom :s )
run Task29
! Read Edit 2 down below first !
Well, you could try to run Task29. That will purge your ROM and leaves it nice and perfectly clean for another ROM without the risk of residua in the memory.
You can find it here:
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
You will need to install a radio ROM after that, too. But having the memory wiped clean this way between installs is a good way to avoid trouble.
ThoroSOE
Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh. Copy that to your freshly formattet memory card and bring up your phone to the bootloader screen (power up with volume down pressed). It will then prompt to install the original ROM. This will overwrite HSPL and any ROM and Radio ROM you installed.
Edit 2: It could be that with ROM 3.14 the SPL is too new for HSPL! Mind that it just supports specific SPL versions! Check that! I think 3.14 has an 3.XX SPL version.
Before I could install HSPL properly I had to downgrade my ROM with an older original one to get the proper SPL (see Edit 1).
Thanks i try it now ill let you know.
Sir you don't need to look fare for your problem.
The problem is that stock ROM 3.14 isn't compatible with HSPL!!
And about Artemis ROM; I suggest you to take your time and read the "How to install?" At the Artemis ROM.
If you did it; you was ale to see you need to remove HSPL before install stock ROM 3.14!
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
OcmyHtc said:
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
Click to expand...
Click to collapse
Sir I don't see how I can write a better step by step guide on how to do it.
I will suggest you to read these post's.
If you have a unbranded device:
http://forum.xda-developers.com/showpost.php?p=8776196&postcount=26465
Ore this in case you have a branded device:
http://forum.xda-developers.com/showpost.php?p=8945325&postcount=28077
PS; if you have random questions, follow the link at my signature "Q&A: How? Where? what? Ideas? [New Users?]"
And if your have other questions, just ask. but it is important to read and follow the institutions.
Thanks again kurt-willems for your answer.
So after reading the entire post on how to flash arthemis rom i did all the steps but i am stuck at the step 7
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
I did all as it is explained in the thread my SSPL is good etc but when i launch SSPL + arthemis nbh, i got into the bootloader.
I tried like 5 times and i start to be angry.
So if you can help me it would be great.
Thanks
Ok i dont have nerves to do it again, can you guys just simply explain me how to uninstall SPL 3.03 and just install HSPL 2 and put a simple rom cause right now my phone don't work because of that.
Thanks you guys for reading me.
If you will install Artemis ROM I suggest you to use v42.0!
I/we know that flashing over SSPL isn't alway's easy (it will not start alway's)
but some important things to know is to deactivate your Anti-Virus; and creating a file with only the rom.nbh and SSPL_RUU in it nothing els!
(PS; Artemis ROM v42.0 starts better than previous v41.0 (own experience))
But if you will return to previous settings;
Reinstall a previous stock ROM ex 1.66 ore 1.47 (depending of you're aria)
Reinstall HSPL use HSPL3_RUN.exe fore this.
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
OcmyHtc said:
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
Click to expand...
Click to collapse
I know this event sir, I have guide lot of users in this part. When you are on the bootlouder screen and at the bottom there is no mention of "usb" the installation will fail.
Its very important to be sure that your device is connect (control it in Active sync), Anti-Virus is turn off, the folder have only the rom.nbh and the SSPL_RUN (nothing more) in it, changing from USB port if you can.
And don't double click on SSPL_RUU fore run, but left click on it and select run ass administrator.
Lately I guide a other user on this and it have takes him 5 tray's
Ow, to be sure you have a good SSPL_RUU version takes mine: Download
Thanks but right now i just want one thing.. My phone to work.
I downloaded V42 and still the same problem.
I downloaded stock rom V1.93 from orange and i can't install it , don't ask me why.
So right now basically my phone is on the stock 3.14 rom and i don't know what to do to put an old rom and to flash to a energy rom with HSPL 3.
Seriously this all thing start to piss me off , no offence guys you making good stuff but sometimes its just to risky to flash.
I followed all the steps one by one and right now i got a useless phone in my hands.
I'm searching a way to get an old rom to be installed and desinstall SSPL.
If you can help me it would be great , im still searching.
You can flash a older stock ROM over SD.
Read my first post. There you can read how to reset to stock (Edit 1). Use an older stock ROM for a proper SPL that works with HSPL.
Install HSPL as instructed in the "how to flash everything" thread.
Run Task29 (see my first post)
Install Radio ROM with x.50.x in it from desktop via Active Sync (you need a Custom_RUU.nbh and the desired Radio ROM).
Install the main ROM you like, f.e. Energy ROM (that's what I use) normally from destop via Active Sync (Energy is one package that works like an official update).
Never had any problems with this way, never needed more than one try.
Hey ThoroSOE i rode Edit 1 and Edit 2.
I hope its not that much to ask but, could you give me a WWE rom like you said in Edit 1 to put it in the SD card ?
It would be really appreciated.
I'm downloading right now a official orange rom (1.66) but i tried installing the 1.43 and it didnt worked, thats why i'm asking you the question for a WWE rom to accomplish what u told me on Edit 1.
Thanks you guys for helping me.
Ok i'm trying this right now Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh
With the 1.66 official rom.
I will let you know.
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly? It must be FAT 32, 4092K - and better not be done with quick formatting.
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
kurt-willems said:
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Click to expand...
Click to collapse
As you can see in my post i already tried to install threw SD card.
When i enter in bootloader (vol down + boot the phone)
I have:
PB81100 HX BC
SPL- 3.03.0000 XE
So i have SSPL in my device.
ThoroSOE said:
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
I have the orange operator in france.I took the version 1.66 put it into the sd card like you said.
When i pressed Vol down + boot to go into bootloader i get the error message:
00028002
Not Allow
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - YES
in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly?
I format my SD card by the format option on the HTC leo.So i don't know if it's the good way to do it ?
It must be FAT 32, 4092K - and better not be done with quick formatting.
Click to expand...
Click to collapse
Please guys help me out i really don't know what do to anymore..
Hey XDA, i've been having trouble with my Hd2 lately, so i wanted to return it back to its original rom, like when i first got it. Right now i have the NRG rom, but i'm trying to get it back to the stock rom. I've followed a lot of guides, but when i try flashing the stock rom it just boots back as the NRG rom. Can anyone help me?
i'm currently trying to use the method where you rename the "ruu_signed.nbh" to "LEOIMG.nbh" and place it on your storage card, but when i reboot while holding down the VOLUME DOWN button, the grey screen thats suppost to show up only flashes for a second, and it leaves me at the red/green/blue screen.
please help...
windwaker said:
Hey XDA, i've been having trouble with my Hd2 lately, so i wanted to return it back to its original rom, like when i first got it. Right now i have the NRG rom, but i'm trying to get it back to the stock rom. I've followed a lot of guides, but when i try flashing the stock rom it just boots back as the NRG rom. Can anyone help me?
i'm currently trying to use the method where you rename the "ruu_signed.nbh" to "LEOIMG.nbh" and place it on your storage card, but when i reboot while holding down the VOLUME DOWN button, the grey screen thats suppost to show up only flashes for a second, and it leaves me at the red/green/blue screen.
Click to expand...
Click to collapse
Try to alter, Download official ROM from HTC.com , run task29 to remove previous ROM, run the downloaded ROM (.exe) after sync'ing your phone with WMDC .
Although HSPL isn't compatible with stock ROM so you can remove it if wanted to.
i just did this. run from your computer hspl3 an install spl 2.08 then run hspl2 and install spl 1.42 then just install the official rom.
never did no sd card stuff
Hi,
After months and months of installing custom ROMs, and I even ran Android for few months, I need to take it to service (I broke the screen).
I have tried (not successfully) to install SPL on it using HSPL3 (info got from here http://forum.xda-developers.com/showthread.php?t=609477). After I have opened HSPL3 and clicked first "Next" button, few seconds later it has generated an error. The phone remained in the 4 color screen showing me the HSPL version I have (SPL-1.42.HSPL XE). From here nothing works (hard reset doesn work, it takes to same screen).
PLEASE help. Nothing I read helped. Phone is unusable now.
Thank you in advance.
PS: I admit I am doing something wrong (since I can not fix it any more)...
[LE: I have copied "RUU_signed.nbh" renamed it, opened Bootloader and I was able to install SPL-1.42.0000. But now I am still stuck in same 4 color screen in the beginning... Hard Reset nor Soft reset do not work.]
Try to star in bootloader mode (vol down + power button), connect usb cable and install HSPL 2.08:
http://forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
Hi,
I did, this is the screen I see (see attached, apologize for the quality).
And also, I need to install stock ROM.
dea.cristi said:
Hi,
I did, this is the screen I see (see attached, apologize for the quality).
And also, I need to install stock ROM.
Click to expand...
Click to collapse
Install stock rom from sd card:
Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
One more info your sd card has to be a normal one (1G or 2G) not HC
and after that reinstall hspl let me know if it was working
Regards,
Me
icsulescu said:
Install stock rom from sd card:
Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
Click to expand...
Click to collapse
Did that and that is the screen I get. I put a 2GB card, copied the .nbh opened bootloader, and the screen above showed.
Any other thoughts?
Did you downloaded the rigth stock rom???
i had similar error trying to install a wwe on a portuguese HD2...
Then i downloaded the portuguese stock rom and worked.
I hope you can recover it.
See ya...
S_Phoenix said:
Did you downloaded the rigth stock rom???
Click to expand...
Click to collapse
I have bought the phone from Romania and this is the ROM I downloaded:
RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship
dea.cristi said:
Did that and that is the screen I get. I put a 2GB card, copied the .nbh opened bootloader, and the screen above showed.
Any other thoughts?
Click to expand...
Click to collapse
I remember someone here few months back also accidentally flashed SPL which give similar error (Stuck at OSPL which you cant flash HSPL due to unsupported version. Means you are stuck with SPL which was not intended for your region/product code). If im not mistaken, you may need to try and flash various version of stock roms with different bundled SPLs (steps to lower version). Meaning, the goal is to slowly step down towards the supported SPL version so that you can flash HSPL and then finally use the right Stock ROM to get your original (out of the box) SPL.
Anyone, please correct me if im wrong. Good luck mate.
tidus18 said:
I remember someone here few months back also accidentally flashed SPL which give similar error (Stuck at OSPL which you cant flash HSPL due to unsupported version. Means you are stuck with SPL which was not intended for your region/product code). If im not mistaken, you may need to try and flash various version of stock roms with different bundled SPLs (steps to lower version). Meaning, the goal is to slowly step down towards the supported SPL version so that you can flash HSPL and then finally use the right Stock ROM to get your original (out of the box) SPL.
Anyone, please correct me if im wrong. Good luck mate.
Click to expand...
Click to collapse
Yep, it seems this is the problem.
Find the first of the stock roms for the country the phone is locked to and flash it.
But try to flash the complete rom and not only the radio.
Try this older rom:
Code:
http://www.htc.com/ro/SupportDownload.aspx?p_id=297&cat=2&dl_id=804
Or this one:
http://www.4shared.com/file/236870807/d9482029/RUU_Leo_HTC_WWE_EastEurope_166.html
Or go here and flash older radios:
http://forum.xda-developers.com/showthread.php?t=611787&highlight=serial
What you need to do is go to HTC's website, for your area, and try and download ROMs with your phone's serial number. This will ensure that you are only allowed to download a ROM that is allowed on your phone. If you get an invalid message, then you need to try another ROM.
You may have a operator locked phone - you can only flash a O2, Vodafone, T-Mobile, etc ROM.
More ROMS
Just in case you need it, here's an absolutely HUGE collection of original shipped ROMs for the Leo.
http://shipped-roms.com/shipped/Leo/
fred_up said:
What you need to do is go to HTC's website, for your area, and try and download ROMs with your phone's serial number.
Click to expand...
Click to collapse
Wish I could... If I enter the serial and try to download I always get the message "not available".
JWhipple said:
Just in case you need it, here's an absolutely HUGE collection of original shipped ROMs for the Leo.
http://shipped-roms.com/shipped/Leo/
Click to expand...
Click to collapse
Thanks for your replies. However, I was able to fix it... by mistake.
After seeing that nothing works I connected the phone while it was showing that screen (4 colors) and I have flashed the stock ROM mentioned by me in previous posts using the flashing tool inside the package. Even if the main condition was to have it sync-ed, I have tried anyway and it worked (it is not sync-ed unless it boots up first).
Now it is functional again and ready for service.
Happy ending eventually.
thanks for link of roms btw how i now what rom is mine my phone is brand not from some network orange t mobile etc....
gagi75 said:
thanks for link of roms btw how i now what rom is mine my phone is brand not from some network orange t mobile etc....
Click to expand...
Click to collapse
If you don't know from where your device is coming from, with witch operator it is brand; than you can contact HTC.
And share them your S/N thy will be able to communicate you to witch provider your device is branded.
thanks m8 thanks again
unbricked Vibrates 7 times then freeze
so i did this and unbricked my phone but now my phone will Vibrates 7 times and then freeze???? help me plz