i have chucky rom on my usa hd2 an i want to change it to energy. ive tried just reflashing but it says "error 244" invalid model id. what am i suppose to do ive lookd on this forum but cant find any solutions.
Related
I tried to downgrade from ROM T-Mobile to 1.60 WWE asia rom, but received the message 100 Device ID Error, what should i do? I have changed my model id to PH10B and still does not work, and i can't even up rom to T-Mobile, because the same error, anyone have an ideas?
Hi all,
I am puzzled ! I can not upgrade my XDA II anymore.
It was first a 1.66 FRA/Orange XDA II.
I succeed in upgrading it to 1.72WWE.
When using HimaGetDevice, I get PH10/CDL/WWE.
I would like to get back to the french version of 1.72,
but no way : country code error.
I patch the file to CDL/WWE : no way.
Orange/FRA ? Same.
Orange WWE has no more success, nor CDL/FRA.
Seems I am stuck in 1.72WWE...
Does somebody ever meet this strange behaviour ?
blg
try to delete all id-entries in the three update files by using er2003edit and re-start updating. that should help.
regards
peter
I 've just tried this few minutes ago : it doesn't work.
blg
No idea, everyone ?
Since my last post, I have tried many other things,
but still Country Id error.
I have tried without PH10 stuff, and the error
changed in Model Id error.
So I put back PH10.
I have tried the following settings : PH10/Imate/WWE
and Coutry Id Error again. With O-O-O-O-O flags.
Someone knows the meaning of the flags ? Seems
the second one is the model (when no model in
ROM, then PH appears in second place).
blg
When I want to upgrade my old WM5 with WM6, there shows a mistake, error (ERROR 294 INVALID VENDER ID. I tried a few WM6, but none of them work. There is the same mistake with all of them. Help me, please, so I can upgrade my O2 TRITON.
Thank you.
either install hardspl first or use the official o2 trion wm6. it should be linked to in the wiki somewhere
He might be using an official o2 rom, but maybe his device isnt an o2 device here is a link to the latest o2 rom http://rapidshare.com/files/82987999/RUU_Hermes_O2_UK_3.62.206.2_6275_1.50.00.00_108_Ship.exe
if you still get the invalid vendor id install HardSPL as xtreme_g stated ,then install the o2 rom
I get after 1% of the progress bar after all the rest of the questions an error 244 on the athena. Can anyone help. This apparently is a "INVALID MODEL ID " and I can't see why this would be. I have tried the 12 AP 3an and 4 as well as the michy rom. All do the same
And yes I have seen "How to FIX INVALID MODEL ID after bad flashing " post but when I follow the thread through the forun I get to the fixing wifi using mtty, is this really all that needs doing. Does the mac address and wifi sort also fix the vendor ID?
btbill said:
I get after 1% of the progress bar after all the rest of the questions an error 244 on the athena. Can anyone help. This apparently is a "INVALID MODEL ID " and I can't see why this would be. I have tried the 12 AP 3an and 4 as well as the michy rom. All do the same
And yes I have seen "How to FIX INVALID MODEL ID after bad flashing " post but when I follow the thread through the forun I get to the fixing wifi using mtty, is this really all that needs doing. Does the mac address and wifi sort also fix the vendor ID?
Click to expand...
Click to collapse
from the readme doc in radio 1.58 upgrade
" ERROR [242] : INVALID LANGUAGE
ERROR [244] : INVALID MODEL ID
ERROR [294] : INVALID VENDER ID
ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade."
Have you unlocked the phone?
read this
http://forum.xda-developers.com/showthread.php?t=429013
Yep thanks, aware of that and already new it was invalid model ID hence why its in my post. It a freinds Athena running SPL1.2 Mine on 3.5. We have both tried a number of roms previously and this happened when going to michy 6.1 for SPL1.2. (Note I had no issues on the SPL 3.5 athena).
Its odd, but what I really wanted to know was why when you follow the forum thread through on how to fix this you end up getting to the mac address fix using mtty? Why would the MAC WiFi fix fix the invalid model ID?
The Invalid model ID that that thread was for was caused by trying to flash a 3.5 ROM on SPL1.2which messed up all sorts of things.
Have you tried flashing the ROM you were using before?
btbill said:
Yep thanks, aware of that and already new it was invalid model ID hence why its in my post. It a freinds Athena running SPL1.2 Mine on 3.5. We have both tried a number of roms previously and this happened when going to michy 6.1 for SPL1.2. (Note I had no issues on the SPL 3.5 athena).
Click to expand...
Click to collapse
more information is good,better than mind reading!
My point was as confucious pointed out , you need to flash the right SPL version
btbill said:
Its odd, but what I really wanted to know was why when you follow the forum thread through on how to fix this you end up getting to the mac address fix using mtty? Why would the MAC WiFi fix fix the invalid model ID?
Click to expand...
Click to collapse
The reason they are both together was that cmonex was talking people through fixing both these problems on irc and eventually got sick of this so wrote a script to fix both problems at once.
Have you checked your SPL from bootloader? Sometimes it is not what you think and you will be able to see if the model id is corrupted.
I don't know your level of knowledge and if you have tried to flash from bootloader or can boot into an OS and are trying to flash via active sync.
It would also help to know what radio you had installed and if you are using vista/xp withh the appropriate Dotnet package
When you see someone with only a few posts asking for help, most people assume you don't have a lot of experience flashing roms
Thanks for the notes. Yes I tried to reflash from the bootloader. This is the first thing I tried. This where It all looks good then as the rom is progressing in the update bar on the PC and the grey screen you get on the athena. It never gets past 1% and then comes up with the error as described, the 244 error. BTW I have just done MTTY stuff..... holding breath now as try to reflash with a SPL1.2 R5.1 Michy.
Hey Worked, good stuff! always nice to know why you are doing something. So now we have a ROM with SPL1.2 we are now going to load the officeal AP4 latest as I am using on mine and I love it.
AP4 is quite old now - have you thought about Michy's ROM which comes in 1.2?
Mac address
btbill said:
thanks for the notes. Yes i tried to reflash from the bootloader. This is the first thing i tried. This where it all looks good then as the rom is progressing in the update bar on the pc and the grey screen you get on the athena. It never gets past 1% and then comes up with the error as described, the 244 error. Btw i have just done mtty stuff..... Holding breath now as try to reflash with a spl1.2 r5.1 michy.
Hey worked, good stuff! Always nice to know why you are doing something. So now we have a rom with spl1.2 we are now going to load the officeal ap4 latest as i am using on mine and i love it.
Click to expand...
Click to collapse
hi there,
i wanted to know that i am facing the same problem that u faced earlier. And u figured out the way to exit that problem through mtty and mac address.
My athena is stuck the bootloader screen so how can i get the mac address of my athena?
Is it printed somewhere on the device or do it comes with the manuals?
Help needed in this regards.
ERMANO.ESTE said:
hi there,
i wanted to know that i am facing the same problem that u faced earlier. And u figured out the way to exit that problem through mtty and mac address.
My athena is stuck the bootloader screen so how can i get the mac address of my athena?
Is it printed somewhere on the device or do it comes with the manuals?
Help needed in this regards.
Click to expand...
Click to collapse
It should be printed on the label inside the battery door cover, if not then i think you can find a piece of network equipment that you no longer use on your network and use that mac address.
Hello. I have a HTC dual and when i was in half way of a hard spl process, the bar progress stoped and a after a hard reset, the screen displays:
RUUNBH
NIKI100
SPL-1.16.0000
CPLD-4
i tried to flash all kinds of roms, but i have several errors: invalid vendor, invalid update, etc....
i think that i need an original rom to restore mobile phone. the phone is from SFR, but i cant get the french rom...WHat can i do? does it need the original rom? is there an alternative process?
Please, someone, help me!
regards
I have the same problem!
Try flashing the official french shipped ROM, even if I think you'll need the shipped SFR one (which is not available AFAIK...). That's the only solution for you to unbrick the phone since you didn't CIDunlocked it by flashing a hardSPL.
Try to search it on the forum, I can't exactly remember where it is, but I know it's available...
AND NEVER FORGET YOU ALWAYS HAVE TO CORRECTLY FLASH A HARDSPL BEFORE ANY OTHER FLASH !!!!!!