Hello. I have a HTC dual and when i was in half way of a hard spl process, the bar progress stoped and a after a hard reset, the screen displays:
RUUNBH
NIKI100
SPL-1.16.0000
CPLD-4
i tried to flash all kinds of roms, but i have several errors: invalid vendor, invalid update, etc....
i think that i need an original rom to restore mobile phone. the phone is from SFR, but i cant get the french rom...WHat can i do? does it need the original rom? is there an alternative process?
Please, someone, help me!
regards
I have the same problem!
Try flashing the official french shipped ROM, even if I think you'll need the shipped SFR one (which is not available AFAIK...). That's the only solution for you to unbrick the phone since you didn't CIDunlocked it by flashing a hardSPL.
Try to search it on the forum, I can't exactly remember where it is, but I know it's available...
AND NEVER FORGET YOU ALWAYS HAVE TO CORRECTLY FLASH A HARDSPL BEFORE ANY OTHER FLASH !!!!!!
Related
Does anyone have the Orange UK rom ?
Not the : HER_ORRO_123702_1060400_WWE_SHIP.exe
I have a UK preproduction unit and need the rom for this device.
Thanks,
P
What's the problem with your prepro version? older bootloader and not flashing from sd-card?
PrePro TyTn
I updated it with a Imat rom.. no problem (it's a unlocked PDA).
A couple of weeks later i was updating it with the HTC rom and my laptop went in standby mode during the update
Now my pda starts up in de bootloader screen (1.06).
No reset option will work, mtty1[1].42.exe (set 14 0) does not work eighter.
If it try to update it again it gives a "Vendor ID error".
It's a Orange UK device, and it think i need the Orange UK rom.
I tried HER_ORRO_123702_1060400_WWE_SHIP.exe...no succes.
It's the only Orange Rom i can find.
Need some help... can't use the PDA anymore
Thanks for your help..
Pim
If it's a preproduction device it should be SuperCID, but I guess your CID got corrupted during the bad flash, so no Orange upgrade will fix it. Too bad you flashed a rom with bootloader 1.06
Can you attach a usb monitor capture of the flashing process until you get the invalid vender id to confrm that?
I saved the Basic and Complete capture
Yes, it was what I said: your CID is corrupted. Bootloader 1.06 enforces CID checking and yours won't match any ROMs CID, it's just junk characters.
There are many of you with this same problem (search the upgrading forum), I hope someone comes with a fix for this soon...
ok, thx for the help.
indeed i really hope someone has a fix soon....
where to get UK Rom
Is there any way to get the UK Orange Rom anyway?
i've installed diamond black 3.1 rom and tonight i changed registry with advanced config tool(its in this rom-i have changed system cache)....after soft reset device freeze at boot screen. hard reset doesn't work..."format failed"-this message only appers.i have entered bootloader and installed wizard love rom...didn't help. i think that registry messed up everything...how can i get back to old registry when i cannot make a hard reset?? my device is SPV M3000 G4 its CID unlocked.It's strange cause device is charging battery and i can enter the bootloader so i dont have a brick...but problems with hard reset and even wizard love rom couldnt help....can someone had this problem too??
looking for ur advice
thanks
when you say you installed wizard love did it go through install all ok but still no boot?
yeah it went all good...i have instakked it without a problem 100% finished and as usual soft reset...but still freeze at boot screen...it drives me mad, i have tried almost everything and i dont know whats happening
stilll not workin'
i have tried everything...have installed 2 difrent wizard love roms and my htc wizard still freeze at boot screen...i can enter the bootloader and install roms but they are all stuck at bootscreen...my problem started when i changed system cache in my registry using advanced tool configuration ( BD 3.1). first after soft reset Wizard was frozen at windows screen, after hard reset it was hanging at touch screen config...i tried to hard reset again but i can only see info that "format failed"....what can i do now?? pleeeeaseeee help....
does your operator have a stock rom you can download?
i was looking for it...i need polish Orange ROM SPL 2.22.1.1 maybe..its my 2nd night fighting with that freezy bastard...do u know where to find one??i have seen some SPL's but they are for NL orange...do u thnk that original rom from orange will help??
kayzerrr said:
i was looking for it...i need polish Orange ROM SPL 2.22.1.1 maybe..its my 2nd night fighting with that freezy bastard...do u know where to find one??i have seen some SPL's but they are for NL orange...do u thnk that original rom from orange will help??
Click to expand...
Click to collapse
Polish SPL= the same as Dutch SPL.
Orange SPL = t-mobile SPL etc..
Only the version changes..
Operators cannot edit the SPL's, they have to use HTC's SPL's.
What only differs is the CID block, which will not be overwritten when flashing either IPL or SPL.
sooo...i tried to remove the HARDspl but i couldnt get into my wm cause device freeze at bootscreen so i have downloaded the spl nk.nbf for orange and flashed this file with RUU...i have now 2.18.0001 SPL but Dutch rom cannot be installed it shows some error INVALID ID or something like that...I dont think that polish and dutch roms are the same because i cannot flash this dutch rom...have u got any idea what i should do next?? its really annoying cause ive tried almost everything and still no progress....and i still dont know if i removed hardSPL with this method that i described...in order to flash an original rom do i have to go back to CID lock??
i tried to install NL Orange rom but its not working...i can only get message " INVALID VENDER ID" with other roms like T-MOBILE i get message "UPDATE ONLY" --try to get newer nk.nbf file...what should i do now??
hi
I've a SPV C100 bought from orange france
I tryed to upgrade by another rom
when upgrading begin it's stoped at 13%
and restart i got a splash screen (start up orange logo)
I tryed most of rom but upgrading stops at 4% or i got invalid vendor ID
now i can't use my phone if someone can help me
Did my phone die?
I need orange rom fr original or another solution
I'm waiting for your answers
please help me!!!!
IMEI:359534005798165
S / N:SZ645F804879 A
P / N:99HCD060-00
HTC Innovation
Hello,
You should read before trying to flash your device. There is sticky post in the forum who contains a lot of important informations about Hard SPL.
About the original orange Rom i don't know where to find it.
fla242
after a lot of search, finally I got here and read this post...
I encountered the same problem, and I think my phone is 80% dead!
My phone was unlocked, but carelessly, I didn't complete the hard-SPL flash procedure and flash a new ROM directly, so it is dead...
I downloaded an original Orange ROM, but process stopped @4%, and returned "INVALID VENDER ID". Is there anyway that I can flash a new ROM?
Now my phone can enter the rainbow screen only, and it reads:
ONBL 1.08.0000
SPL 1.08.0000
Any experts here can offer a solution? Can I flash rom via SD card, and how? Really really appreciate your help.
SPV C100 was reborned!
I just can't hide the excitement when I finally flashed a ROM back to my phone.
This model is already quite old. Not sure if anyone still encounter the same problem. Anyway, I'd like to share how I did it, just in case it still helps you.
The key point is called "HTC Goldcard". It is made of a normal Mini-SD card, but it helps you to get a super-CID in tri-color mode.
Google it to find more details, and I am sure you guy can work it out yourselves. You could PM me as well, if you understand my Chinglish
how
how o make htc gold card for spv c100
l have not find any thing
imyels said:
I just can't hide the excitement when I finally flashed a ROM back to my phone.
This model is already quite old. Not sure if anyone still encounter the same problem. Anyway, I'd like to share how I did it, just in case it still helps you.
The key point is called "HTC Goldcard". It is made of a normal Mini-SD card, but it helps you to get a super-CID in tri-color mode.
Google it to find more details, and I am sure you guy can work it out yourselves. You could PM me as well, if you understand my Chinglish
Click to expand...
Click to collapse
The HTC GoldCard is a great way of rescuring a WM smart phone or ppc,it not only works on c100,but also other HTC mobile sevices
please tell me is there any way torecover spv c100
Here you can find a few Oxygen ROMs
Hello
after upgrading i'm stucked in spalsh screen (the one with rom version and others...). can i skip this step? the device is lost?
do you have others questions?
Cheers
no one?
Hi.. did I broke the device?
Cheers
Hi!
Give us more info about your device.
IPL,SPL,installed ROM,etc
Did you try hard reset?
BR
Szig
Here you have the answer like given many times before:
If format fails it is hopeless.
If format goes well and works take the original Aku3 ROM and flash it. The device will work again.
Stuck in splashscreen
High to all
I have a problem with my Charmer - I was flashing it, when I didn't read any instructions and I failed it. Some month ago I came back to Charmer and I repaired it with the "Rescue Kit" and it worked some time. But now even if I flash it with any ROM, my PC write "Congratulation", Charmer turns on but stuck in the splash screen and It's all... when I go to bootloader, it goes and write the IPL and SPL, but when I do Hard reser, it writes "Formad failed", but It can be flash!!! With any ROMs... Please, help me, I like this phone...
punker1993 said:
High to all
I have a problem with my Charmer - I was flashing it, when I didn't read any instructions and I failed it. Some month ago I came back to Charmer and I repaired it with the "Rescue Kit" and it worked some time. But now even if I flash it with any ROM, my PC write "Congratulation", Charmer turns on but stuck in the splash screen and It's all... when I go to bootloader, it goes and write the IPL and SPL, but when I do Hard reser, it writes "Formad failed", but It can be flash!!! With any ROMs... Please, help me, I like this phone...
Click to expand...
Click to collapse
ChrBeck said:
Here you have the answer like given many times before:
If format fails it is hopeless.
If format goes well and works take the original Aku3 ROM and flash it. The device will work again.
Click to expand...
Click to collapse
Hi!
As you can see mostly it is hopeless.Rarely rehotting DOC chip can help and I read somewhere that sometimes flashing helped,but that was a desperated try with Prophet ROM or something like that.If I was you I could try to flash it with Goldcard (just from curiousity and nothing to lose),but if ChrBeck can't help then who?
BR
Scootie
OK first:
Yes that mith with the Prophet flashing is true. But for that we need a working Aku1 ROM to get the IPL down.
Then the Prophet thing works. That is what I found out.
The heating up thing is a mith. It helped only 1 time and is not the best you can do.
And Goldcard is the biggest SH*T I ever heared.
For devices without reachable OEMSPL something like a Goldcard doesn't exist. Goldcard just flashs with SuperCID and without Signature checking. It is like using a HardSPL and won't help.
That is all I know.
Get a good working AKU1 and I'll build you the solution (if my idea is realy right).
ChrBeck said:
OK first:
Yes that mith with the Prophet flashing is true. But for that we need a working Aku1 ROM to get the IPL down.
Then the Prophet thing works. That is what I found out.
The heating up thing is a mith. It helped only 1 time and is not the best you can do.
And Goldcard is the biggest SH*T I ever heared.
For devices without reachable OEMSPL something like a Goldcard doesn't exist. Goldcard just flashs with SuperCID and without Signature checking. It is like using a HardSPL and won't help.
That is all I know.
Get a good working AKU1 and I'll build you the solution (if my idea is realy right).
Click to expand...
Click to collapse
Hi!
Thanks for the answer.
Just a few things:
I'm in searching for an AKU1 ROM.I had it on my computer years ago,but it lost when my HDD damaged.If I find it,I will upload it for you.
The heating up:in this case probably it doesn't help.When we have a device that can't be flashed properly,we try this and it helps more often than you think.Not only with PDAs,but with phones too.
Goldcard SH¤T:
I know what is Goldcard about.
The reason I mentioned it,it helped me 3-4 times when the device (not only Charmer,other devices too) stuck on bootloader or splash screen after flashing.I didn't have too much time in the workshop,so I tried this and worked.
I don't want to argue with you,I know you are an expert in this,I just tried to help with my experiencies.
BR
Scootie
P.S.:I found it on the xda-developers ftp server: RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship.rar
ftp://xda:[email protected]_1120223_11202110_11220_T-MobileUK_Ship.rar
OK nice that you found the ROM. Maybe we'll have a new test package for the fix of format failed error soon then.
And yes you are right sometimes Goldcard helps if you have forgotten to flash HardSPL or it is damaged then it may help but you need to have acces to OEMSPL and we don't have it.
So hope I can do something soon.
Hi!
I have a question:
I have a Charmer with IPL,SPL 3.08.Unfortunately it is CID locked,so I can flash it with official v3 ROMs only.Is there any solution to downgrade it?Or with JTAG only?
Thanks in advance!
BR
Scootie
The NoID RUU will be able to downgrade it.
Hi!
I tried that,but:
1.flashing is successful,but nothing has changed,I get the old OS after upgrade
2.I tried the v1 ROM I found.The IPL has been changed to 1.12,but the SPL remained 3.08.The OS has been changed in this case,so it worked flawlessly.
The CID unlocking methods didn't work (obvious,SPL was 3.08).
After that I tried to upgrade it,but it was a torture.I got errors and errors,but after an hour finally I could upgrade it successfully.
So,if you have an idea,I have a device to test it.
BR
Scootie
The IPL is down means it worked. After that you can flash a Prophet ROM.
What ROM of Prophet?
High, I was today flashing my Charmer with all original ROM I mean and the flashing process behaves OK, after flashing, it writes "Congratulation" and all the things like OS, Radio, IPL... are change to the definite ROM. But it's all. It will stuck in the splash screen... I have read in this thread something about Prophet ROM. What is it?
The prohpet ROM is an official Prophet AKU 2 flashable after downgrade.
System is as follows:
Fist flash the Charmer AKU1
Then flash a Prophet AKU2
Then flash Charmer Aku3.
You need to do all these steps with the NOID RUU.
That should fix the HardReset failing.
I'm working to get a tool running that does the whole thing automatically.
THX
Oh ****, Thanx 4 quickly answer...And I'm waiting :-D
Ok, so now I'm having
IPL 1.12
SPL 1.12.0000
GSM 01.12.20
OS 1.12.2.23
And I'm waiting 4 your instructions...
How have you gotten the SPL down?
Normally, with flashing... It can be flashed with every ROM...
OK. Cause normally SPL stays up. I never saw a full downgrade.
I want to help someone on this please , bcs HTC SPV M3100 when i'm trying to switch on phone was stuck on HTC logo and nothing more , i have try to put on boatloader mode and phone was going on bootloader mode three color screen and show this:
HERM100
IPL-1.04
HERM100
SPL-2.03
i'm trying with hard spl from Pof soft but error getting.
Can someone find a time to help me?
hallooo
experts please!
Hello haveri,
what ROM are you trying to start? I was stuck on HTC logo too, when I tried to start a ROM without installing Striped ROM first, which was highly needed. So I done hard reset(three color screen), and flashed again.
For starters, put in bootloader, connect to PC (1st untick "Allow USB Connections" in activesync) and run Hard SPL V7. Install it on your Herms and hope it works because otherwise you are in for a whole heap of hairpulling frustration...
If you get Hard SPL onto your Hermes then use the sd card method to flash a new rom...
You could have avoided this by doing a little research instead of going full pelt into flashing, you Hard SPL BEFORE you get into trouble, NOT AFTER....
Hi guys,
I have a similar problem with a T-Mobile branded TyTn from a friend of mine who thought flashing ROMs without putting device into HardSPL would be clever.
The devices has also IPL-1.04 and SPL-2.03 and from the bootscreen it looks like WM5 should have been installed. I also get the "NO GSM" message and I REALLY tried every fking method but without success.
I even created a Goldcard (and verified on another device it's working, level 0 instead FF) and tried to flash several ROMs (also Cingular WM5 ROM and original german T-Mobile ROM) but no luck.
I also tried to run HardSPL V7 but as far as I remember it just said it cannot connect.
Funny thing: HardSPL V9 DOES start flashing and on the PDA and the PC the bar shows 100% but some moments later it says "Could not update" (or something like that).
I even tried different mtty methods from several posts from the forum (erasing the NAND on different ways, qtek loader method with erasing the first blocks) but I'm really really frustrated now and I believe there is no solution here?! (device has no guarentee)
So, if someone has ANY hint or useful information write it down or send me a PM.
I gladly appreciate your help and hope for a solution!
Cheers
P.S.: I couldn't find any information saying Goldcard method works (or even exists) for Hermes. Can someone confirm it does really work?