Screen problem - Droid Eris Q&A, Help & Troubleshooting

Got a second eris off ebay to use as a test platform, the problem with it is that the screen is selecting whatever it wants. It just goes crazy and won't let me move or remove widgets. I think it is the digitizer.....what are your thoughts?
When I touch anywhere on the screen it will scroll between screens
Sent from my ERIS using XDA App

Give this a shot: http://www.megaupload.com/?d=64CJHQ6L - It's the official HTC touch screen calibration apk. If that doesn't work, I would root it and see if it wasn't a problem with the rom.

Ill give it a try. Ive already got it rooted and running celb 2.3
Sent from my ERIS using XDA App

Applied the calibration and yhat seemed to help. Do you think a bad trackball could cause problems?
Sent from my ERIS using XDA App

Yes. Most common trackball issue is constant scrolling to the left.
Sent from my FroyoEris using XDA App

UPDATE!!
ok, read into the trackball issue...this is what i came up with.
i removed the batt cover and battery, removed the 4 screws in the housing, exposed the circuit board, removed the 2 screws holding the power port. then, gently raising the port, removed the trackball itself (paying close attention to the orientation).
went to the store and got a bottle of 91% isopropyl alcohol and a can of that spray air stuff. took qtips and scrubbed the trackball itself and then did the same to the sensor that is on the board. then took the can of air and blasted all the moisture and residue that remained.
put it all back togeter, powered it on and BAM!! all seems to be working well now.

Related

[Solved] Screen won't let me touch it. Cold...

Sometimes (about half the time now) when i try to unlock my screen the touch won't work. Some of these times (what was just occurring at first) it will unlock and then the screen will "jitter" and select random things while not responding to my touch, other times it just wont respond or do anything. Originally i thought that this was just a problem with the stock rom but i have boot strapped and flashed joker's new rom and it's still having the problem. Should i be contacting Motorola to gave them replace my phone?
Other info:
I have in pocket deselected.
RUNNING 198_7
Using widget locker, but i think it happens with out it
Launcher pro
Thanks for the help!
Edit:
So I figured out that the top left of my screen isn't level with the rest. When the problem starts to happen I turn off the screen, compress the top left corner and the problem is gone for half a day to a day. So... that's cool... at least it is still under warranty.
I found the it happened to my phone ALOT when connected via USB to the computer and after I cleaned the screen off with glass cleaner when I ran the multi-touch test for the 8-point touchmod.
hoslayer13 said:
I found the it happened to my phone ALOT when connected via USB to the computer and after I cleaned the screen off with glass cleaner when I ran the multi-touch test for the 8-point touchmod.
Click to expand...
Click to collapse
I've seen it happen on my hero with bad usb cords but this is happening when not plugged in. I've also never used glass cleaner on it or the multi-touch test on the photon.
Sent from my Photon 4G
Im thinking i need to let a hold of Motorola
Sent from my Photon 4G
So I was using my phone and just set it down and it started freaking out and going into things before the screen even shut off. Should I check out the multi-touch thing to just see where my touch points are or can I do some type of calibration?
Sent from my Photon 4G
Edit: I'm guessing that I'm the only one having this problem?
Have u tried reflashing 8 point touch?
Sent from my MB855 using XDA App
Doballa said:
Have u tried reflashing 8 point touch?
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
I haven't ever put 8 point touch on my phone. I could try to flash it though and see if that does anything.
Sent from my Photon 4G
I would up with a similar issue on my Evo, and I wound up having to get a new one. Not sure if the Photon is gonna be the same, but that was how my phone was sadly. Let us know if the eight point touch helps or not.
So everything looks fine on the multi-touch but i cant get the program up while my screen is freakin out so it kinda defeats the purpose. Jokers skinny 4g doesn't have 8 touch point mod correct?
Sent from my Photon 4G
No not that I know of.
Sent from my Photon via XDA
So I got the multi up while it was freakin out. There was a point toward the top of the screen (the edge of the touch "disc" was touching the edge of the screen) that stayed where it was but just jittered left to right. The really weird part is that my second touch point could not go above it. This has to be a manufacturer flaw as far as I'm concerned so when I have time I'm going to call Motorola.
Sent from my Photon 4G
Its an issue with charging. Just unplug it if it gets annoyingly useless
Sent from my MB855 using XDA App
jokersax11 said:
Its an issue with charging. Just unplug it if it gets annoyingly useless
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
I would agree as I've seen something similar with my Heroc. The problem is it happens all the time when it's unplugged... the micro USB could be haunted with an evil ghost charger... I'm not sure what the exercisium protcol is for that.
So I figured out that the top left of my screen isn't level with the rest. When the problem starts to happen I turn off the screen, compress the top left corner and the problem is gone for half a day to a day. So... That's cool...
Sent from my Photon 4G

[Q] Touch Screen Issues

There is a vertical area on the touch screen that is totally unresponsive. Because of this I am unable to hit c, v, f, g or t on my soft keyboard, and using the input text icon thingy have seen that it goes higher up.
Some background now.
Back in January/February, broke the digitizer on my phone. I ordered a new one from repairsuniverse. Installed, all perfectly fine. I would sometimes get "bubbles" and dust between the screens (I messed up the heat tape some.) I would use the lil plastic prybar and fix the issue without opening the whole phone. No issues before.
Yesterday, I decided to finally root, s-off, and try some mods. Before I got to it, I fixed another one of those bubble things on my screen. Went through it all, and went fairly smoothly, and installed cleanrom de. Touch screen would sometimes wig out and become completely unresponsive last night, but hitting the power button would bring it back. Went on and started downloading allot of my apps from the market, and went to bed.
Woke up this morning, touch screen was completely unresponsive. Couldn't get past the lockscreen, even after pulling the battery. I though I must of messed something up earlier when I popped off the screen yesterday (because the signs before compete unresponsiveness.) Tore the phone apart, physically inspected the cable and screen, found no visible defects, and firmly reseated the cable back into the...thingy.
Still no go. Yesterday I had only flashed the kernel for 3.13 on scotts thread, thought that might of been the issue, and flashed the whole 3.14 ruu from nils business sense rom page (because it has a fixed mainver) onto my phone. Success. The screen was working again. Go unlock>recovery>install cleanrom de again. Trying to sign into google, cant hit the listed letters above, flipped into landscape to continue. Couldn't figure out still what was wrong. I went back to the 3.14 ruu, not testing it before when it was installed, and the issue persisted there as well.
So, software? Hardware? Any ideas for fixes would be greatly appreciated.
In the market download an app like touch test and go over the area that is having problems and see if they persist.
From what you have said sounds like a hardware issue. I just am not sure what you would need to do next.
Sent from my ADR6425LVW using XDA
Downloaded the app, dead area all the way vertical between the 6th and 9th grid
I went and wiped absolutely everything and installed cleanrom again (like you I'm doubting software is the issue.)
Going to open her back up, maybe before it was software, but this time its hardware...I don't know...
Did u ever get this resolved I am having the exact same issue but mine is a "like new replacement".
I too have a dead zone going horizontal from line 22-24, but can still use the keyboard in that space so it's not completely dead
Actually I can touch almost anything in that section, only a few apps give me fits in that area???
Sent from my ADR6425LVW using xda premium
ROB281 said:
I too have a dead zone going horizontal from line 22-24, but can still use the keyboard in that space so it's not completely dead
Actually I can touch almost anything in that section, only a few apps give me fits in that area???
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Op issue is similar to mine, it got to the point where I called VZW and I am having a replacement sent AGAIN! doesn't it annoy you?
Also tried touch test and yep big void right in the middle vertically on the phone but the weird thing is that it goes back to normal after a while.
Also I re flashed thinking it was a software issue but nope.
So do you think it was the cheap digitizer or bad install?

Screen issues. Please help!

So I just installed a new back panel on my phone and I don't think I caused anything to come loose but my screen is having an issues with these weird horizontal lines moving around. They're faint but they're annoying. Could somebody please help me and quickly?
Disassemble your phone like you did before double check all connections test the phone, just hold the battery in place, then if its good do a normal shut down and put it back together carefully not to bump any connectors. Find out what one is the screen connector GENTLY in hook it then hook it back up and test
Sent from my SGH-I777 using xda premium
Thanks. I hope its just a cable not fully attached and I didn't break something.
I'll try that in the morning
Sent from my SGH-I777 using xda premium

Vibrant got wet acting funny

Hi,
I installed a screen protector that used this fluid when installing the protector (you spray it on the screen and the protector and smush them together). I got a lot of the fluid inside the phone when it was on (I took battery cover off and it was dripping through). Now the phone is acting weird, I am randomly getting USB connected notice, the whole screen has flipped sideways and I cant get it to flip back, when I try to turn off screen flipping the button doesn't do anything (I actually cant turn it on the button just doesn't do anything). Its says media scanning sometimes randomly, and I get this wierd screen after pressing the unlock button from a locked state, a screen Ive never seen before, it has like buttons for home and some others, and when I press home it takes me to my unlock code. Its just acting bizarre. Anyone have any ideas what is going on?
Thanks
If it was dripping through the phone It probably fried mutliple things inside the phone. Hence the problems your having
Sent from my SGH-T959 using xda app-developers app
Put it in a container with rice or some bread. It will extract the moisture. Don't plug it in until you get it dry. Good luck.
Sent from my SCH-I535 using xda premium

[Q] [GO] Water Damage, Screen Flickering. Solution

Hi guys,
I took my Go out for a swim and after my swim, the screen started to flicker and eventually the screen died(yes, all the flaps were closed, I double checked). Now this was last month, and I did the whole rice bag thing, and still no improvement :3 But occasionally the screen comes back to life when I tap on it and then dies again.. And last week, I just happened to switch on the phone and it started working like nothing ever happened! And yesterday it stopped working again I took it to the Sony store and they say that it might take about 400RM(120USD) to fix it.. Is there anything that I can do to fix this??
Try to have it tested for water resistance, if a machine test shows leaks even after cleaning the caps it's not your fault (at least if $ony follows their service manuals to the letter)
You can open the screws up in the back and manually troubleshoot what is up with it. Check it for any water or moisture on the inside or any damage from it. Good luck
Sent from my Xperia Go using Tapatalk
@Hukanawa
Did you switch it off the instant it got wet. Using the internally wet phone could damage the main board which could be causing the problems.
Or the screen could have been screwed up...
Sent from my Xperia P using Tapatalk
Hamza Murad said:
@Hukanawa
Did you switch it off the instant it got wet. Using the internally wet phone could damage the main board which could be causing the problems.
Or the screen could have been screwed up...
Sent from my Xperia P using Tapatalk
Click to expand...
Click to collapse
I did switch it off after the screen started flickering :/.. I opened her up today and theres a a little of rust on one of the connectors that lead from the screen to the board..
Well there you go. Youre gonna have to get new parts or fix the old ones.
Try removing the rust from the connector, then fully drying the insides and see if the screen turns on if you moove the connector around. Also check ebay for the price of a new screen. It might be cheaper then you think.
Sent from my Xperia Go using Tapatalk
After water damage my xperia z3 having the same problem! Screen flickering, brightness is very low I can barely see anything in daylight! Otherwise everything working fine! Any idea what might causing the problem? Is it the screen or the motherboard is damaged?

Categories

Resources