Related
Hi,
im currently running the following setup:
phoenix 2.51
radio 1.71
hard spl 1.22
with o2 as service provider in germany.
since some flashing and testing i discovered that after a few seconds of speaking i get massive interferences in the call. my calling partner cant understand me, but i can hear him.
i already flashed back to 6.1 wwe official rom but the error still persists.
does anybody have ideas which could help me?
RsRichard said:
Hi,
im currently running the following setup:
phoenix 2.51
radio 1.71
hard spl 1.22
with o2 as service provider in germany.
since some flashing and testing i discovered that after a few seconds of speaking i get massive interferences in the call. my calling partner cant understand me, but i can hear him.
i already flashed back to 6.1 wwe official rom but the error still persists.
does anybody have ideas which could help me?
Click to expand...
Click to collapse
Try a different radio, eg 1.65.28.25. Works very well, and low power consumption to boot.
use other radio rom
I had the same problem.
Many noises, people on the other side couldn't hear me as well as dropping line.
I also tried different combination in spl/rom/radio (also restoring original spl/rom/radio).
I solved by sending phone to service reparing (warranty).
I don't know exactly what they did since ther was no physical repair but they said they only upgraded something (which sounds strange to me since ther's no official upgrade for my country from HTC) but now it works fine.
shinji_73 said:
I solved by sending phone to service reparing (warranty).
I don't know exactly what they did since ther was no physical repair but they said they only upgraded something (which sounds strange to me since ther's no official upgrade for my country from HTC) but now it works fine.
Click to expand...
Click to collapse
So, what's the build number of ROM and also radio number? If it is one not on the board, any chance of dumping the ROM and posting it?
i tried with 1.5xx roms, 1.65.28.25 etc. and still have the problem.....
rling said:
So, what's the build number of ROM and also radio number? If it is one not on the board, any chance of dumping the ROM and posting it?
Click to expand...
Click to collapse
Rom version: 1.31.408.09
Date rom: 10/30/07
Radio version: 1.58.16.27
Protocol version: 25.61.30.03W
It seems to be the "standard" configuration...
But now on the splash screen there's no more "Niki pro" trace...D 1.31 as it used to be.
ok... i again tried several configurations and also flashed the complete original rom. the error still is there what can i do now? is there any possibility to format the whole phone except the bootloader?
heeeeeeeeeeeeeeeeeeeeeeellllllllppppppppppp
RsRichard said:
ok... i again tried several configurations and also flashed the complete original rom. the error still is there what can i do now? is there any possibility to format the whole phone except the bootloader?
Click to expand...
Click to collapse
The radio, SPL and ROM cover the entire phone's OS. The official HTC WWE release 2.09.405.1 has all three in it. Disable the Hardspl (if other than HardSPL 1.22) by flashing the sspl, then flash this ROM. This will return the phone to original state. You might need to do this if you need to send the phone back for warranty service.
I'm going to send my phone to service again because I got my problems back...because I definetly think I got some "hardware" problems...
If I shake my phone some metallic noises can be heard inside, did you try something similar?
any news on this topic? i still cant use my niki.... im still receiving massive intereferences when calling since my flashing orgy. how to put it back to a fully OEM state without any mods?
nothing? will i really have to send my phone to the service ..... please not, i damaged one of the guarantee seels (back of the phone, right to the camera) mit the pen once....
RsRichard said:
nothing? will i really have to send my phone to the service ..... please not, i damaged one of the guarantee seels (back of the phone, right to the camera) mit the pen once....
Click to expand...
Click to collapse
it must be radio issue - please try to flash a complete rom+radio, flash from microSD this time, rename the nbh file to NIKEIMG.nbh, enter bootloader and flash.
*push* still not working
T-mobile HD2 Update MR Software (Version 3.14.531.1), What is it?
Today T-mobile release a new software update. Does anybody know what it is for?
I assume if you have a rom installed it is no good. I am running Energy Rom, and Radio 2.15.50.14, so I am assuming updating would be a bad idea.
yeah has anyone installed it and what are the benefits of it?? I want to know b4 installing...
You may get better answers over in the TMOUS HD2 forum on this
Features of the 3.14.531.1 update
I also had the same question - what is it that changed with the new HTC HD2 ROM? I spent a lot of time searching, and found this:
Pasting the text below, just in case that link dies (I hate it when that happens):
[pasted from phonesreview uk on 10/22/2010]
==============================================
For all you T-mobile HTC HD2 smartphone users out there who have been waiting for an official software update to land, you’ll be happy to know that today is the day you have been waiting for as T-Mobile is to release software update version 3.14.531.1 to the HTC HD2.
According to an article over on Tmonews, the new software update from T-mobile will deliver several fixes along with stability improvements and access to new apps like Amazon MP3 and Shazam. As for those bug fixes…
The new software update will fix such stuff as slow browsing when on Facebook, the inability to delete Gmail messages in the preview screen, Twitter errors, SMS being delivered to the wrong person, and the white screen whilst browsing the net, the inability to hear Visual Voicemail, unable to unlock the device, unable to unlock the HTC HD2 with correct password, and the lack of a space bar on company directory keyboard, and finally the speakerphone doesn’t work after using the Call Assist app to call 611.
HTC HD2 user can download the new software update by visiting t-mobile and following the instruction; however T-mobile will issue a notification by text to HTC HD2 users when the update is ready, which should be today the 19th of October so keep an eye on your text messages and let us know how you get along.
xxandy said:
I also had the same question - what is it that changed with the new HTC HD2 ROM? I spent a lot of time searching, and found this:
Pasting the text below, just in case that link dies (I hate it when that happens):
[pasted from phonesreview uk on 10/22/2010]
==============================================
For all you T-mobile HTC HD2 smartphone users out there who have been waiting for an official software update to land, you’ll be happy to know that today is the day you have been waiting for as T-Mobile is to release software update version 3.14.531.1 to the HTC HD2.
According to an article over on Tmonews, the new software update from T-mobile will deliver several fixes along with stability improvements and access to new apps like Amazon MP3 and Shazam. As for those bug fixes…
The new software update will fix such stuff as slow browsing when on Facebook, the inability to delete Gmail messages in the preview screen, Twitter errors, SMS being delivered to the wrong person, and the white screen whilst browsing the net, the inability to hear Visual Voicemail, unable to unlock the device, unable to unlock the HTC HD2 with correct password, and the lack of a space bar on company directory keyboard, and finally the speakerphone doesn’t work after using the Call Assist app to call 611.
HTC HD2 user can download the new software update by visiting t-mobile and following the instruction; however T-mobile will issue a notification by text to HTC HD2 users when the update is ready, which should be today the 19th of October so keep an eye on your text messages and let us know how you get along.
Click to expand...
Click to collapse
It will also **** up some stuff, while fixing others.
No Bluetooth stack fixes...
Its horrible...I'm having the worst connections to apps like Omarket, Marketplace, Slacker Radio...The Wifi will not stay connected...The only thing working as far as connections is the internet.
edit: Everything's working now except the Facebook app.
hi... does anyone know?
i buyed my hd2 t-mobile unlocked and i'm using it in argentina with "Claro Argentina"... the question is... if i change the rom in this Leo... it's going to be locked again to be used only with T-Mobile?
i don't want to blow it!
thanks!
cainmako said:
hi... does anyone know?
i buyed my hd2 t-mobile unlocked and i'm using it in argentina with "Claro Argentina"... the question is... if i change the rom in this Leo... it's going to be locked again to be used only with T-Mobile?
i don't want to blow it!
thanks!
Click to expand...
Click to collapse
no. Once a phone is network unlocked it cannot be locked again.
cainmako said:
hi... does anyone know?
i buyed my hd2 t-mobile unlocked and i'm using it in argentina with "Claro Argentina"... the question is... if i change the rom in this Leo... it's going to be locked again to be used only with T-Mobile?
i don't want to blow it!
thanks!
Click to expand...
Click to collapse
yes, it will be locked again! But, there is no reason why T-mobile will not request an unlock code from HTC on your behalf. Usually it takes 24-48hrs
erezgati2 said:
yes, it will be locked again! But, there is no reason why T-mobile will not request an unlock code from HTC on your behalf. Usually it takes 24-48hrs
Click to expand...
Click to collapse
Not correct sir, ons your device is bean unlock't and you upgrade/downgrade your Rom it will not be locked again.
DensoYamaha41 said:
T-mobile HD2 Update MR Software (Version 3.14.531.1), What is it?
Today T-mobile release a new software update. Does anybody know what it is for?
I assume if you have a rom installed it is no good. I am running Energy Rom, and Radio 2.15.50.14, so I am assuming updating would be a bad idea.
Click to expand...
Click to collapse
Why you say it's a bad idea...because the official is no good or because you can damage the phone this way ? I went from omega to the 3.14.531.1 and I experience many problems freezes restarts etc ...I think the update damaged the phone (although it was successful)
yorgosb said:
Why you say it's a bad idea...because the official is no good or because you can damage the phone this way ?
Click to expand...
Click to collapse
no, because it would remove the rom he was using, which he didnt want.
I went from omega to the 3.14.531.1 and I experience many problems freezes restarts etc ...I think the update damaged the phone (although it was successful)
Click to expand...
Click to collapse
you probably left hspl installed, 3.14 plus hspl = "many problems freezes restarts etc"
Ι am no expert but I am sure I replaced HSPL with SPL 2.08
Still I experience all these freezes and restarts with both 2.13.531.1 and 3.14.531.1 versions (in 3.14.531.1 it even freezes when you insert the memory card)
Can it be something else ?
yorgosb said:
Ι am no expert but I am sure I replaced HSPL with SPL 2.08
Click to expand...
Click to collapse
so, is that spl 2.08 or hspl 2.08 or spl 2.08.0000 or hspl 2.08.hspl? clarity please, leaving off the last 4 digits prevents us from double checking your work.
enter bootloader, whats it say next to spl? (all of it, not just the x.xx bit)
samsamuel said:
so, is that spl 2.08 or hspl 2.08 or spl 2.08.0000 or hspl 2.08.hspl?
Click to expand...
Click to collapse
Entering the bootloader right now says 2.10.0000
It must have been changed after flashing the official 2.13.531.1 (via USB)
Prior to doing that I had run the utility hspl3 and chosen 2.08.0000 (there are 2 choices in this utility as you say 2.08.0000 and 2.08.hspl) so (I thought) I had replaced the hspl with the official loader
Does this utility (hspl3) effectively changes the SPL or just updates the displayed number ?
Do you suggest following the micro SD card method to flash and not the USB method ?
I read somewhere that the ONLY way to replace the SPL is by flashing from micro SD...so what is the hspl3 utility for ?
Can you help me with that please ?
I need help because the phone right now although it seems to have been flashed correctly to official 2.13.531.1 and displays 2.10.0000 as it's SPL version freezes and restarts every some minutes...
yorgosb said:
Entering the bootloader right now says 2.10.0000
Click to expand...
Click to collapse
thats stock - any ending 0000 is stock
It must have been changed after flashing the official 2.13.531.1 (via USB)
Click to expand...
Click to collapse
yes, because you chose teh wrong 2.08 (next step) it will be changed by usb flashing. Had you chosen 2.08.hspl, this would still say 2.08.hspl
Prior to doing that I had run the utility hspl3 and chosen 2.08.0000 (there are 2 choices in this utility as you say 2.08.0000 and 2.08.hspl) so (I thought) I had replaced the hspl with the official loader
Click to expand...
Click to collapse
you replaced stock with stock
Does this utility (hspl3) effectively changes the SPL or just updates the displayed number ?
Click to expand...
Click to collapse
completely changes the actual spl software in your phone.
Do you suggest following the micro SD card method to flash and not the USB method ?
Click to expand...
Click to collapse
usb, always usb
I read somewhere that the ONLY way to replace the SPL is by flashing from micro SD...so what is the hspl3 utility for ?
Click to expand...
Click to collapse
thats old instructions.
for a start hspl .exeis for applying hspl, not just removing it - you can simply run hspl3 (or hspl4, whichever, makes no difference) - choose an spl ending .0000, hspl is gone. choose one with .hspl and, , , guess, , , yes! it loads hspl onto teh phone.
Can you help me with that please ?
I need help because the phone right now although it seems to have been flashed correctly to official 2.13.531.1 and displays 2.10.0000 as it's SPL version freezes and restarts every some minutes...
Click to expand...
Click to collapse
yep, happens a lot that, especially with stock roms,, give 3.14 a try perhaps.
3.14.531.1 has more problems...not only it freezes with certain applications (or making phone calls) but it freezes when inserting the microSD card as well...that's why I went to 2.13.531.1...at least I could keep the microSD inside without freezing...
And that's why I think it's not a firmware-software issue...that's what I'm trying to verify...
Now I have another bigger issue...after trying to flash a firmware that I think it wasn't T-Mobile's by mistake (the phone is T-Mobile model) the SPL is now 3.03.0000 and the 2.13.531.1 and 3.14.531.1 firmwares refuse to start flashing
Is there something I can do ?
I want to go back to 2.13.531.1 so I can sent it to T-Mobile
Thanks
Use hspl4, choose 2.08.hspl, reflash 2.13.
Sounds like you flashed a non tmous stock 3.14,,, don't do anything that silly again.
Just confirm for us,,, your send key is green, right?
Thank you very much I used hspl4 and managed to go back to the proper ROM
As for the send key if you mean the key with the little telephone on it yes it's green...the phone is T-mobile it says so on the top
Now that I have tried 2.10.531.1 - 2.13.531.1 and 3.14.531.1 versions and all 3
suffer from strange freezes and restarts when making phone calls or watching movies from the internet or the storage card (after some time) don't you think it's safe to presume that there is a hardware fault and return it to the vendor ?
Do you think there is something else for me to try ?
Thank you again for your help...
I updated my phone (HD2 T-mobile) via internet website and when I finished the updating process, the phone did not work at all.
I tried more than once to switch it on, but it didn't respond. I took the battery out and put it in again, but nothing happened.
When I connect the phone with the charger, the charger light doesn't become on.
It seems that the phone is dead!!!. What do you suggest to solve this problem? If you think it is a hardware problem, what is the name of this hardware
Tray update ROM again
It dose not Enter in bootload mode
How I can apdate rom from diffrent way
What rom did you flash? If it isn't a tmous rom then the phone is destroyed.
HD2-RUU_Leo_HTC_ARA_1.66.415.9_Radio_15.37.50.07U_2.10.50.08_2_Signed_LEO_Ship
This ROM's name
Please support us with a bit more of information.
You´ve got a T-Mobile device and flashed it with a different ROM for a HTC device without branding.
But what did you meant with "flash via Website"? How did you really flash (via Active Sync or via SD card)?
Did you install HSPL or at least SSPL first?
I Flash it via Active Sync
yes I Installed HSPL But sspl I didn't Install
Its dead,the radio in that rom has killed it.
Only options are JTAG or replace mainboard
Though it is strange that the filename says 2.10.50 for the radio version,since 1.66 roms usually come with ..51.. radios,which kill tmouses.
If it really is a ..50.. radio in a 1.66 rom then a tmous should boot but hang at splash, yet you say yours just won't start, so I suspect a typo in the filename. (Not your typo,I can see lots of references to that filename online.)
I am download this rom from HTC site
Mo7ammad_89 said:
I Flash it via Active Sync
yes I Installed HSPL But sspl I didn't Install
Click to expand...
Click to collapse
You said that you have a T-Mobile device, but you didn´t tell that it is the US version of it. Is it or do you have the European version?
If it is the USversion you really flashed the wrong Radio ROM.
For the European version it would be no problem
no My Mobile Is Us version
Mo7ammad_89 said:
no My Mobile Is Us version
Click to expand...
Click to collapse
So it seems you have bricked your device, I would recommend to bring it to a service point and hope that they do not notice what you have done.
Perhaps this thread is a last chance for you:
http://forum.xda-developers.com/showthread.php?t=668347
Good luck!
Thank You My friend But This chance Is Impossible becuse It's need to Enter bootload mode and I can't Enter It
check the pins where the battery connect they bend very easy so you dont get a connection the red light will come on when u charge and the phone wont boot! there are three pins make sure they are all makeing a connection! Its very common!
I am sorry but I don't understand you very well can you explain more please
Mo7ammad_89 said:
I am sorry but I don't understand you very well can you explain more please
Click to expand...
Click to collapse
In other words:
Take out your battery and check the contacts between battery and the deviceframe. Is any of them bent?
No It's Not Any Of Them bent I think
but why you ask About It
AM I can repair My Mobile by them
And If you can explain for me by picture I well be glad
Mo7ammad_89 said:
No It's Not Any Of Them bent I think
but why you ask About It
AM I can repair My Mobile by them
And If you can explain for me by picture I well be glad
Click to expand...
Click to collapse
Sorry, it was not my idea but from b3ltazar. His thought was that your device might get no power to work.
I recommend once again to bring your device to a htc service center in order to repair it. In my mind you seem to have an hardware issue
Hello guys,
I have a question, lately I tried some different ROM's and also a Windows 7 rom. But after a while my touch screen stopped working, so I resetted my phone returned it to it's original state with the normal windows 6.5 rom and brought it back to the shop, although I forgot to change my HSPL.. Now HTC says that my guarantee expired due to me modding my software. Now there is another shop in my city that has a HTC repaircenter so I was planning on bringing it there, I restored it to the original HSPL, but when I try to update my ROM back to the STOCK rom it stays still on 0% while trying to update it. So I'm quite unsure what the state of my telephone is, wether my touchscreen is broken or not because if you could've seen the state my phone is in you would think it's brand new. So I find it hard to believe that my touch screen really broke since I never dropped it. If anyone could help me out what to do, because HTC send me a bill of €480,- if I want to repair that phone and that is outrageous ofcourse.
If anyone has any other idea's, how to get my stockrom back on or take it to another shop where they repair cellphone's, please enlighten me!
wrong stock rom often causes hang at 0%, you sure its the correct stock rom for your phone? cant just use any hd2 stock rom.
Yeah, I'm 100% sure it's the right stock rom.
when you say 'I restored it to the original hspl', , which spl did you set? (which spl shows in bootloader, now?) Also, what does teh top line of bootloader say?
Pb81100 hx-bc
spl-2.08.0000 8g xe
thats not a regular hd2 stock spl, that's only stock spl for tmous phones. send a regular hd2 back with that spl and they will know you've been hacking it.
assuming you don't have a tmous (hd2 model and full filename of any roms being discussed is always very useful in post 1), use hspl2 to set 1,66,0000 and try the sd card flash again. I've tried reverting to stock O2 UK rom from spl 2.08 in the past with the same failure. reverting to 1,66 and the flashing fixed it.
Alright, I've read on some forums that that was the right HSPL. Do you by any change have a link to that HSPL or can I just google it because I'd rather not download any risky files anymore since my phone is ****ed up as it is right now. Thank you so much for answering my questions mate, you've been a great help though.
Tombason said:
Alright, I've read on some forums that that was the right HSPL.
Click to expand...
Click to collapse
its the right 'spl' (its not an 'hspl', , , its an 'spl' ) for a tmous phone, ,
go get hspl2.exe from the hspl thread (or see links in my sig) run it, choose 1.66.0000 or 1.66.hspl
(unless you DO have a tmous? you haven't said, and its hard to tell if you're american or not, , you said 'cellphone', but alos 'shop' instead of store, so hard to tell, hehe)) , and i havent looked up the Pb81100 hx-bc code to check)
samsamuel said:
its the right 'spl' (its not an 'hspl', , , its an 'spl' ) for a tmous phone, ,
go get hspl2.exe from the hspl thread (or see links in my sig) run it, choose 1.66.0000 or 1.66.hspl
(unless you DO have a tmous? you haven't said, and its hard to tell if you're american or not, , you said 'cellphone', but alos 'shop' instead of store, so hard to tell, hehe)) , and i havent looked up the Pb81100 hx-bc code to check)
Click to expand...
Click to collapse
Oh my bad, I am from the Netherlands. Alright I'll try that, thanks for your help mate.
Alright, I got Windows Mobile running again. Thanks for that. Although my touch screen is still not working sadly enough.... Guess I'll have to pay a visit to a phonestore.
good to know for sure that 2.08.0000 prevents downgrading. confirmation is always useful.
Unlucky about the screen.
Hi folks! Please help me! I killed tons of nerves because of this phone!
So here is my sad story. 1 Year ago i bought second hand HTC HD2. Seller told me that phone is locked to T-mobile(Not US one!! UK one!! Transaction was held in UK). After I got phone I rushed home to install Android and I was successful at this point. Then I bought a unlock code from ebay, so I Finally could make phone calls. Then I realized that the only way I can insert code is putting back WM 6.5. And here the worst part starts. I read hundreds of manuals but still was unsuccessful. I downloaded many official WM 6.5 ROM installers but they didn't flash my phone. They just got stuck at 0% and error pops up. I was trying it for a week and then I just raged and put phone to the shelf and was waiting til I get will power to start over again.
I hear that every phone needs its own ROM installer for particular region and operator but I couldn't find UK T-mobile ROM so used many others and it didn't help.
I also heard that by IMEI it is possible to find to what operator the phone is locked(just to check if seller didn't lie me) but again I didn't manage to do so.
Here is my IMEI 354120035834066
Please experts help me, little nooby, with this horrible situation.
thank you
Many people report that you can in fact put the code in under android after all,,,, perhaps its only earlier versions that couldn't. That being said you probably want to put a new one on since it (and magldr) will be old versions.
Anyway, all that hanging at 0% is because there is no hspl installed.
Plenty of places to get tmo stock rom,, go put
3.14 ruu Leo tmo uk
.....into Google. When I just did it the real htc site came up second.
Its not necessary, tho,,
Phone into bootloader,
connect USB
Use hspl4 to set 3.03.hspl
Return to bootloader
Flash any 3.14 rom USING USB,NOT SD CARD
Done.
samsamuel said:
Many people report that you can in fact put the code in under android after all,,,, perhaps its only earlier versions that couldn't. That being said you probably want to put a new one on since it (and magldr) will be old versions.
Anyway, all that hanging at 0% is because there is no hspl installed.
Plenty of places to get tmo stock rom,, go put
3.14 ruu Leo tmo uk
.....into Google. When I just did it the real htc site came up second.
Its not necessary, tho,,
Phone into bootloader,
connect USB
Use hspl4 to set 3.03.hspl
Return to bootloader
Flash any 3.14 rom USING USB,NOT SD CARD
Done.
Click to expand...
Click to collapse
Thank you, but always when I am trying yo install HSPL4 critical error comes up. I think it comes up because I have spl 2.1000000 which should be 2.08 I found information that in order to downgrade to 2.08 I need to flash official ROM. But when I am trying to do so it is always stuck on 0%...
I am so $%^& up ...
any ideas?.... thx
Does HSPL4 not allow you to install 3.03 to your device ?
T-Mobile UK ROM is available direct from HTC site:
http://www.htc.com/uk/help/htc-hd2/#download
Mister B said:
Does HSPL4 not allow you to install 3.03 to your device ?
T-Mobile UK ROM is available direct from HTC site:
http://www.htc.com/uk/help/htc-hd2/#download
Click to expand...
Click to collapse
Hi. Thanks for ROM, but still.. got stuck on 0% and doesn't go further..
When I try to install HSPL4 it always gives me critical error...
Fixed my problem. Now everything works fine!! Thank you very much guys!!
how ??
rom4eg said:
Fixed my problem. Now everything works fine!! Thank you very much guys!!
Click to expand...
Click to collapse
explain