Related
Hello everyone !
Heres a new rom..
This rom is from taiwan made by Youzii.
- Build 18125
- No Cube, but TouchFLO and Touch Comm manager
- Including some tools and apps (Pocket RAR, psshutxp, pbar, and more!)
- Very stable and fast !
- Page Pool is 6 MB !
NOTE !
I have just updated this version and it works very well, BUT you might use the NVID WM5 rom before you flash this one, NOT the one which is included.. That made my phone start to boot loader..
Download Link:
Here
I have changed the files a little so they now look more like the ones we are used to..
http://da9l.4shared.com/
1. Under the EVO7 folder download both EVO7.part1.rar and EVO7.part2.rar
2. Begin with the extraction of part 1.. Run the exe thats the right for you
3. Now after flashing is done remain the pda unused and extract EVO7.part2.rar
4. Run Upgrade_Rom.bat and wait for its completion. Do as the utility tells you to
5. And now the rom should be installed !
Pictures in the bottom if the thread!
Thank You For ROM
All is OK
The page pool is 6mb.
Thank you ! will update it !
Thank you for sharing, Da9L!!
As in EVO7tw, Cube and HTCHome can be installed in EVO7en indepandantly with removable cab files later.^^
Visit http://cid-8231c261cbdd4326.skydrive.live.com/browse.aspx/818EVO/EVO7en to download the long-waited Cube and HTCHome cabs now!!
Thank Support for the mirrors:
http://rapidshare.com/files/51991260/EVO7en.part1.exe
http://rapidshare.com/files/51991566/EVO7en.part2.rar
-------------------------------------------------------------------
How to falsh your device to EVO7：
-------------------------------------------------------------------
1.Flash PV_TEMP (download PV_Temp http://tom-love.net/Rom/Prophet/WM6....et_PV_Temp.zip )
2.Install Cert_SPCS.cab、EnableRapi.cab to the wm5 PVTEMP (your ppc).
3.Execute EVO7.part1.exe >> choose upgrade method 3 (No bother to try part 2, double click EVO7.1 Part 1 will do the tricks)
Note: Part 1 and Part 2 are the same file devided into two parts. The former is a self-decompressing file which associates the latter by itself)
4.Wait for 20 mins or so. (or you may like to check PdocWrite out in your PC for time's saving.)
5. 1st device configuration (the first time)
6.Hard-reset (type 1234 on Clear Storage, rather than hold two buttons + the tiny hole pricking, is strongly recommanded).
7. 2nd device configuration (the second time)
8. Start enjoying your "brand-new" device!
-------------------------------------------------------------------
Wanna try EVO7tw (with removable Cube and HTCHome)?? Here is the link to the original thread:
http://www.mobile01.com/topicdetail.php?f=224&t=385791&last=3478621
Tips: ---------------------------------------------------------------------
1. The default region is Taiwan which can be changed at "Start\Settings\System\Regional Settings\Region.
2. Support Far-East characters including troditional Chinese, simplified Chinese, Japanese, and Korea, etc,. To display the characters properly please set the region accordingly at the same path above.
3. It's strongly recommanded to update the new version of G4 SIP Tweak, a third party application incorporated in EVO7en, for a better dispaly to the app.
4. The blue lines on the uppermost screen is an application to show battery and memory status on the left and right part respectively. Disable it by deleting pwrstat.lnk at the folder of Windows\Startup if it is not right to your eye^^|||
5. If you prefer the original contacts, disable the built-in PocketCM by assing the right soft-button to Contacts with Soft Key at Start\Settings\System.
6. No higher than 264MHz over-clock is recommanded for stability, though 274MHz works fine for some devices.
7. The clock on the upper menu bar can be changed to the battery icon by editing the value of registry as below:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell] "ShowTitleBarClock"=dword:0 >> battery display (1 = clock display)
8. Button 4 is yet to assign. Do it with Buttons at Start\Settings.
9. Edit the values of registry as below to modify the sensitivity of Touchflo (finger scrolling):
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings "SpeedHigh" (20 is recommanded) and "SpeedLow" (65 is recommanded).
10. To edit registry, you may like to run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
11. X-button, thanks to the freelancer contributing it, seems to take to built-18125 better than pBar 1.4. (my case is that there are always 20M or so left no matter how long the device runs)
12. For whom like to read Thai characters properly, please visit the EVO7en link to download EVO extFont.cab
13. Original IM (原生輸入法) installation:
Copy all files OriginalIM.zip into the Windows folder
Import the registry file PhonIM.zip (注音輸入法).
Chajeiim (倉頡輸入法) and Mboxcht (手寫板輸入法) installation:
Copy the AdditionalDll.zip files into Windows
Import All_Chtim.reg instead.
You'll get all three input methods at once.
OriginalIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48906&d=1188663728
PhonIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48907&d=1188663758
AdditionalDll >> http://forum.xda-developers.com/attachment.php?attachmentid=48908&d=1188663783
AllChiIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48909&d=1188663798
14. To get Chinese lunar calendar, change the value of the Dword, "ShowLunarCalendar", under "HKEY_LOCAL_MACHINE\Software\Microsoft\Calendar" from "0" to "1"
15. The letters chopped on the setting pages can be sloved by editing the registry as below: (Note: not for Chinese users)
[HKEY_LOCAL_MACHINE\nls] "SystemLCID"=dword:404 << change dword from 404 to 409
16. Users who are not good at modifying registry please install EVO ENGfix.cab to fix the letter-chopping problem on some setting pages.
http://forum.xda-developers.com/attachment.php?attachmentid=49966&d=1189363816
17. For whom who like to have the setting pages for HTCHome, please install EVO HTCHomeSettings.cab.
http://forum.xda-developers.com/attachment.php?attachmentid=49970&d=1189364038
18. Users who like to check your namelist with Celedial instead of the default SmartDialing, please modify the registry as below:
[HKEY_LOCAL_MACHINE\Security\Phone\Skin]
change the path from "Ext"="\\windows\\phcanhtc.dll" to "Ext"="\\windows\\celedial1.dll" (reboot your device to get it^^)
--------------------------------------------------------------------------
Note: The Evo7 series supports devices listed as below:
* SPV M600
* Qtek S200
* i-mate JAMin
* Dopod 818 Pro
* Dopod 830
* XDA neo (O2 Germany)
* VPA Compact S (Vodafone Germany)
* TC 500 (T-Home Germany)
evo7 EN .....
Flashed and using in the speed of 264. Everything goes so fine, I like its WLM version .2600, no need to mess up my contacts information ......
and I like the function of touchflo although its a bit too sensitive for my clumsy thumb.... ^_^
kool job. ^_^
SUPPORT!!
dioxda2 said:
Flashed and using in the speed of 264. Everything goes so fine, I like its WLM version .2600, no need to mess up my contacts information ......
and I like the function of touchflo although its a bit too sensitive for my clumsy thumb.... ^_^
kool job. ^_^
SUPPORT!!
Click to expand...
Click to collapse
Edit the values of registry as below to modify the sensitivity:
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings
SpeedHigh (20 is recommanded)
SpeedLow (65 is recommanded)
To edit registry, please run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
iiiox said:
Edit the values of registry as below to modify the sensitivity:
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings
SpeedHigh (20 is recommanded)
SpeedLow (65 is recommanded)
To edit registry, please run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
Click to expand...
Click to collapse
Dear iiiox,
noted, set, enjoying now!! ^_^
Thai font display incorrect
Thai font cannot display on today screen, how can I solve this problem?
I already change regional setting to "Thai".
thanks
ITS NOT WORK!
first step: i did upgrade by ROMUpdateUtility_NV_G4
*then HARD-RESET
when Windows 5 was loaded i started UPGRADE_ROM -
new OS not uploaded into device :/
(
extracted OS
Initializing...........End Time
)
G4 SIP Tweak.cab
Hi There,
Can anyone inform me what is G4 SIP Tweak.cab intend to. Is it only for G4 hardware ?
If i have G3 hardware , should i use it ?
Thanks
tb146 said:
Hi There,
Can anyone inform me what is G4 SIP Tweak.cab intend to. Is it only for G4 hardware ?
If i have G3 hardware , should i use it ?
Thanks
Click to expand...
Click to collapse
Hi, nothing has to do with G3 or G4 chips. It's an application to set the default loaded IM (input method), to hide uncessary IMs, and to assign the default display of fonts.
Big Brother iiiox is promoting EV07 English version here! This is a very great ROM. I am using the Chinese version now. It is very stable and fast.
One more important thing is that for all who prefer the BT sound quality of Fantastic B4 but not pleased with its stability and speed, this one will be your solution. Per Youzhi, he has used the A2DP driver from P800W. You will not hear any hiss sound under this ROM. I have tested it with my iTech S38 and Sony HBH-DS220 with great level of satisfaction.
Try it and you will love this ROM!
mark_vip said:
ITS NOT WORK!
first step: i did upgrade by ROMUpdateUtility_NV_G4
*then HARD-RESET
when Windows 5 was loaded i started UPGRADE_ROM -
new OS not uploaded into device :/
(
extracted OS
Initializing...........End Time
)
Click to expand...
Click to collapse
Not totally sure what your point is. If it is that your device failed to upgrade from wm5 to EVO7, try the steps listed below.
How to falsh your device to EVO7：
1.Flash PVTEMP (you can find it at the forum everywhere, literally speaking^^")
2.Install Cert_SPCS.cab、EnableRapi.cab to the wm5 PVTEMP (your ppc).
3.Execute EVO7.part1.exe >> choose upgrade method 3 (No bother to try part 2, double click EVO7.1 Part 1 will do the tricks)
Note: Part 1 and Part 2 are the same file devided into two parts. The former is a self-decompressing file which associates the latter by itself)
4.Wait for 20 mins or so. (or you may like to check PdocWrite out in your PC for time's saving.)
5. 1st device configuration (the first time)
6.Hard-reset (type 1234 on Clear Storage, rather than hold two buttons + the tiny hole pricking, is strongly recommanded).
7. 2nd device configuration (the second time)
8. Start enjoying your "brand-new" device!
iiiox said:
Hi, nothing has to do with G3 or G4 chips. It's an application to set the default loaded IM (input method), to hide uncessary IMs, and to assign the default display of fonts.
Click to expand...
Click to collapse
Thank you bro for your explanation.... downloading now...
I will flash step 1 with PV Temp ..then EVO7.1 part2 , is it right ?
Perhaps you can guide me how to flash this ROM.
Thanks
fungsaikit said:
Big Brother iiiox is promoting EV07 English version here! This is a very great ROM. I am using the Chinese version now. It is very stable and fast.
One more important thing is that for all who prefer the BT sound quality of Fantastic B4 but not pleased with its stability and speed, this one will be your solution. Per Youzhi, he has used the A2DP driver from P800W. You will not hear any hiss sound under this ROM. I have tested it with my iTech S38 and Sony HBH-DS220 with great level of satisfaction.
Try it and you will love this ROM!
Click to expand...
Click to collapse
Haha!! Brother fungsaikit, I'm here only because Youzii's out of sight at the time being^^" You know that I can solve few [email protected][email protected] Only if Youzii ansers calls in person here....
BTW, why don't you try EVO7en^^?? It's even faster (though fewer applications like removable HTCHome and Cube at this moment^^)
Hi, please follow the following steps:
1. Flash the PV Temp Rom;
2. Install the Cert_SPCS cab to your device;
3. Install the EnableRapi cab to your device;
4. Double the file name EVO7.1 Part 1;
5. Choose 3 on the cmd screen;
6. Wait 20 minutes at least;
7. Disconnect the USB;
8. Press the soft-reset button on the bottom. Then press the camera button and command manager button simutaneously. When you see a few lines of words on the black screen, press the phone-calling button. You will see "FAT Format is completed".
9. Enjoy!
tb146 said:
Thank you bro for your explanation.... downloading now...
I will flash step 1 with PV Temp ..then EVO7.1 part2 , is it right ?
Perhaps you can guide me how to flash this ROM.
Thanks
Click to expand...
Click to collapse
Hi, "How-to-do" had been added to the fourth post on the thread^^"
Note: Devices can be upgraded via three options. The method I posted here is the most reliable one^^
-------------------------------------------
haha!! thank yuu very much, brother fungsaikt!! both of us offered the same solution^^!
Hehehe, I am a bit lazy recently. Maybe because I flashed my 818 Pro at least 3 to 4 times a day before. Now the EVO7.1 is really fantastic. It is very stable and fast. The new method of calling out the cube can't be better in elsewhere. Also, I am playing with my new BT headset Sony HBH-DS220 these 2 days. Hehehe.... forgive me being a bit lazy to flash new ROM.
iiiox said:
Hi, "How-to-do" had been added to the fourth post on the thread^^"
Note: Devices can be upgraded via three options. The method I posted here is the most reliable one^^
-------------------------------------------
haha!! thank yuu very much, brother fungsaikt!! both of us offered the same solution^^!
Click to expand...
Click to collapse
So sorry, cannot wait to flash so i miss to read it.
Thank you guys....
This program is for those of you looking for HTC Cube program which -
1) Runs on O2 ATOM
2) Which works fully without using FlashLite or FlashPlayer
3) Which is low in memory requirement and does not increase battery consumption.
4) Has a Contact page on cube that is fully working and integrates with HTC Home plugin
5) Which is tested on ATOM and is considered relatively 'stable' code
THIS IS ONLY TESTED ON O2 ATOM
NOTE: All other PDAs can try but please test it at your own risk and feedback if it works for you.
HTC Touch Cube working on O2 ATOM(WM6 AKU0.7.0)!
================================================================================
LATEST UPDATE - NOV 18th 2007
+++++++++++++
Touchflo Alpha 2
+++++++++++++
PRE-REQUISITE: This program needs HTC Home Plugin, HTC Music Plugin, and HTC AudioManager to be fully integrated.
The latest Alpha 2 cab file is downloadable now!
(See one of the attachments here labelled - Touchflo alpha 2.zip)
Instructions
1) Install this cab file
2) Delete APL, Biotouch, and HUB from the /Windows/Startup first to avoid black screen problem.
3) Soft-reset
Features in this cab file -
1) Finger activation of cube
2) Efrost's 'activation icon' at the top bar is no longer visible.
3) All efrost's finger scrolling features available and functioning.
FOOTNOTE:
1) You must uninstall the old version of this cab first. Then soft-reset before installing this one.
2) This cab does not include Touch Settings - for this feature, you can still download the Touch Settings V1.22.cab attached below.
3) You can ignore all the other archive information below to avoid confusing yourself!
4) You can ask for help in this thread but don't expect me to help you troubleshoot unless you're using an O2 ATOM!
5) Please share your ideas and findings here on how to improve it further.
=====================================================================================
TO GET FULL CONTROL MOVEMENT OF CUBE
THIS CUBE WILL NOT BE COMPLETE WITHOUT MENTIONING THE BREAKTHROUGH THAT KONA MADE FOR THE HTC CUBE ON NON-TOUCH DEVICES LIKE THE O2 ATOM. THANKS KONA AND GANG FOR DOING THIS!
To learn more, visit Kona's thread here: http://forum.xda-developers.com/showthread.php?t=343583.
NOTE: Kindly donate(any amount, no matter how small) to these WONDERFUL DEVELOPERS who solve so many problems for us in O2 ATOM!!!
=====================================================================================
ARCHIVE INFO - from previous postings.
Hi guys,
I've managed to get the HTC Touch Cube working with jiggs's WM6 AKU 0.7.0. Not sure if anyone was previously successful in doing this. But unfortunately, at the moment, it is using the ButtonFlo method of turning the cube.
I dont have the expertise to get this thing working using the Finger or stylus to get the touchscreen to turn the cube yet.
Maybe one of you geniuses out there will be able to take this one step further and get it working fully! (I'm hoping)
To get the HTC Cube working with finger touch-screen capability (using eFrost's FTouchFlo) - just follow the steps in post #150 - http://forum.xda-developers.com/showpost.php?p=1598731&postcount=150
The files needed for this installation is also located in this post.
============================
ALTERNATIVE INSTALLATION METHOD
============================
ALTERNATIVELY, if you want to configure using the long-way; and using the attachments below, please follow the steps listed here:-
INSTALLATION STEPS -
1) Install jiggs's WM6 AKU070 (make sure HTC HomePlugin is activated - dunno if you really need it).
2) Install HTC Audio Manager.
3) Install HTC Audio Mgr Today Plug-in.
4) Install Touch flo(Alpha).cab
5) Install JT ButtonFlo.cab
6) Map Touch Flo pgm to one of the buttons - I chose the O2 Media Plus button.
7) Soft-reset.
PART 2 - Customizing Your Cube using Touch Settings!
Step 1: Install Touch settings V1.22.cab, then soft reset.
Step 2: Go to windows\startup and delete file called "Mediahubmini"
Step 3: Soft reset (I don't think it's neccesary though, but i do perform
this step.
Step 4: OH YES! Also install the missing ICON files for the APLauncher - AL_xx_Touch.zip into a separate directory (eg. \Touch).
Step 5: Copy the same ICON files(from Step4) into \Windows. (these files were missing in Part1).
Step6 - Soft-reset and you should see everything working!
CHECKLIST ON HOW TO AVOID BLACKSCREEN AFTER YOU INSTALL THIS APPS
1) Make sure that you have HTC Home, HTC Audio Mgr & Plugin installed and activated in Today settings.
2) Make sure you install all the missing AP_xx_Touch.zip ICON files.
3) If you have Touch Settings program installed -
a) Make sure you DELETE MediaHubMini.lnk from \Windows\Startup &
b) Start Touch Settings and click SAVE to save the settings once after missing icons are installed.
Once you have Steps 1-3 done properly, just do a SOFT-RESET and the cube should be working.
NOTE: Below is a photo of Touch Settings V1.22.
( and here's the official link from the author - http://ww2.fatattitude.com/software/software-item.aspx?appid=10 )
If you're happy with his work, you can buy him a beer - http://www.fatattitude.com/buybeer)
Additional info available here - http://forum.xda-developers.com/showthread.php?t=324556
(Pls note that this is still in Alpha testing stage so install at your own risk)
ADDENDUM - (POSTED on OCT 16, 2007)
TOUCHSCREEN ACTIVATION FOR TOUCH CUBE
Thanks to efrost's FTouchFlo (Alpha 3 version) with application launcher function, I can now use my finger to 'activate' the cube without using button!
For efrost's program FTouchFlo, please refer to his posting and donate if you're happy with his contribution! Here's the link - http://forum.xda-developers.com/showthread.php?t=334965
Pre-requisite - you MUST have a working Touch Cube on yr ATOM.
Step 1 - Install efrost's FTouchFlo ( and follow his instructions to calibrate and then try making sure u can scroll).
Step 2 - Replace the default FTouchflo config file under /Program Files/FTouchFlo_a3/FTouchFloConfig.txt with the one I've posted here.
Step 3 - Restart FTouchFlo - under Programs, select Start FTouchFlo and then u try to test the scrolling.
Step 4 - You're ready to test the activation -
a) You must first put Ftouchflo into launcher mode (IMPORTANT STEP) - swipe your finger from down-to-up-and-down again in one swift motion. (you will hear a *beep* on your PDA to let you know that you've toggled into launcher mode.
b) Just swipe your finger from LEFT to RIGHT and then it will automatically launch the cube on your screen!
Step 5 - Once the cube is on yr screen, you can then continue to swipe from LEFT to RIGHT and be able to turn the cube.
TO ENSURE RESPONSIVENESS IN YOUR DEVICE
To ensure responsiveness in your device, do not specify too many applications to launch using gestures - I've modified FTouchFloConfig.txt to only launch the cube.
The touchscreen functionality for this Touch cube will improve as efrost improves his program!
Thanks efrost!
(Pls note that this is still in Alpha testing stage so install at your own risk)
NOTE: NO OFFICIAL SUPPORT IS PROVIDED FOR ANY OF THESE SOFTWARE POSTED HERE!
That good news if it can work. Will try it out when i'm free.
http://forum.xda-developers.com/showthread.php?t=333163
this is the one ur asking right? same touchflo? the author of that program is on that thread. He visited there & u may ask some question to him.
Hi mikewtw. May i know the installation steps?
wonder12 said:
Hi mikewtw. May i know the installation steps?
Click to expand...
Click to collapse
please try to read http://forum.xda-developers.com/showthread.php?t=328010 i never try to me also..
Installation steps I used to get Touch Cube working.
Here are the steps I used:-
1) Install jiggs's WM6 AKU070 (make sure HTC HomePlugin is activated - dunno if you really need it).
2) Install HTC Audio Manager.
3) Install HTC Audio Mgr Today Plug-in.
4) Install Touch flo(Alpha).cab
5) Install JT ButtonFlo.cab
6) Map Touch Flo pgm to one of the buttons - I chose the O2 Media Plus button.
7) Soft-reset.
Everything should work beautifully when you press the button for the old O2 Media Plus ( which has now been mapped to Touch Flo program).
Everything in the Touch Flo Cube should work.
And I believe there's also a Touch Flo Cube Customizer program available. I will try to repost it here if I find it working well.
I'm hoping someone will get the touchscreen interface working so that we can swipe and activate the cube using our fingers or stylus! Thats what I'm waiting for!
The ultimate "O2 Touch" is coming!
Mike
I will stick with my Iphone look O2 Atom, much cooler must say
Phone goes missing / Touch Settings V1.22 not working on this Touch Cube yet.
PROBLEM #1
I notice that my Phone button is missing from the HTC Home Plugin after I installed this Touch Cube. So instead of 6 buttons on the Home Plugin, I'm only left with 5 button!
Luckily the Touch Cube (using buttonflo) works and I can put my 9 favorite contacts in the contact page on the cube
When I reinstall Home Plugin again and reset, the 6buttons comes back, but my Touch Cube blanks out Then when I reinstall Touch Cube again, my Home Plugin is missing the Phone button...Oh well...
PROBLEM#2
Also, when I install Touch Settings V1.22, my Touch Cube blanks out when I try to launch it.
Tried installing Touch Settings before Touch Cube and vice-versa, but that didnt help either
If anyone can get Touch Settings V1.22 working with this Touch Cube, please post your files and installation instructions. THanks.
this touchflo is still on demo version, alot of programs have conflict here.
Is this topic's Flo the *actual* one or the Flash based one? <.<?\
Edit: Hm, it's the actual one.
Unfortunately, all the thing does is just blackscreen my device, so I can't test it further.
Ultimate Chicken said:
Is this topic's Flo the *actual* one or the Flash based one? <.<?\
Edit: Hm, it's the actual one.
Unfortunately, all the thing does is just blackscreen my device, so I can't test it further.
Click to expand...
Click to collapse
You must have HTC Audio Mgr and HTC Audio Mgr Plugin installed and also HTC Home Plugin running first.
Then install Touch Flo(alpha).cab and lastly the JTButtonFlo.cab file. Map a O2 Atom button to Touch Flo and then do a soft-reset.
After that, it should work.
Followed the instructions and still got blackscreen'd. Verified that the music manager plugin was running as well.
Is it possible that this program can be affected by the presence of HTC Today?
Also, where do you install it in? Both installing in Device Rom caused a blackscreen. Installing in ExtROM had no effect (pressing the button that runs TouchCube does nothing).
Ultimate Chicken said:
Followed the instructions and still got blackscreen'd. Verified that the music manager plugin was running as well.
Is it possible that this program can be affected by the presence of HTC Today?
Also, where do you install it in? Both installing in Device Rom caused a blackscreen. Installing in ExtROM had no effect (pressing the button that runs TouchCube does nothing).
Click to expand...
Click to collapse
the CREATOR IF THIS program is BYKA.. he is on this thread
Try this in your ATOM..Touchflo...
http://forum.xda-developers.com/showthread.php?t=333163
Byka's Cool Touchflo 3D Cube
http://forum.xda-developers.com/showthread.php?t=328010
try to ask question on that thread..
No no no, Riden, this is NOT Byka's program. If you install it, it says Bepe and someone else, NOT Byka. I have used Byka's rendition before, abliet for just 3 days - this one does NOT require Flash, unlike Bykas, leading me to think it IS the original, ripped, Touchflo cab that I'd seen around here some time ago.
I can NOT ask Byka about this version of the TouchCube. In fact, I have no reason whatsoever to approach Byka, as his flash cube installs and runs perfectly on my device, with the exception of being a memory hog. >.>
Ultimate Chicken said:
No no no, Riden, this is NOT Byka's program. If you install it, it says Bepe and someone else, NOT Byka. I have used Byka's rendition before, abliet for just 3 days - this one does NOT require Flash, unlike Bykas, leading me to think it IS the original, ripped, Touchflo cab that I'd seen around here some time ago.
I can NOT ask Byka about this version of the TouchCube. In fact, I have no reason whatsoever to approach Byka, as his flash cube installs and runs perfectly on my device, with the exception of being a memory hog. >.>
Click to expand...
Click to collapse
ah now its clear so this is another program..can u provide me a screenshot pls.. how good it is?
gives black screen , will wait for touchflo rom ,if it is possible
ah now its clear so this is another program..can u provide me a screenshot pls.. how good it is?
Click to expand...
Click to collapse
I can't, because it blackscreens my device. <.<
I'll try again when I get home, tho, but don't expect a miracle. This needs to be worked on.
started to inspect the TouchFLO. Boy, this is going to be another set of sleepless nights.
Exellent
jiggs said:
started to inspect the TouchFLO. Boy, this is going to be another set of sleepless nights.
Click to expand...
Click to collapse
I can smell TouchFlo on our MightY AtoM soon
GO HERE
NOT FOR ATOM EXEC NOR HP6800 SERIES.
First of all this ROM is basically an extension over JIGGS AKU 0.7A ROM ..
Thanks to Jiggs (Thanks Mate!), abusalza for his kitchen and all the other community members
This new ROM is much faster than the old one thanks to some more tweaks and newer versions..
The Rom is 6MB PAGEPOOL.... and includes the following.. :-
1. HTC DIALER
2. Total Commander
4. HTC communication manager
5. HTC Action Screen
6. Network wizard
7. WM5torage 1.78
8. HTC keypad , HTC Keyboard(with T9 Input )
9. HTC CUBE , works AGAIN this time FASTER , MORE RESPONSIVE and as before the Installation is SEMI-AUTOMATIC..(Senses left-right movement ,Very similar to the real HTC TOUCH) Thanks to Kona_Mtbkr
11.HTC Audio Manager and the Plugin..
12.FINGER SCROLL CONTACTS , comes pre configured with default softkey etc..(icontacts )
13.Many other Misc. add-ons also included
14.X-Button
15.HTC calculator
16.HTC Windows Media Player SKIN
Removed
1.Photo Editor
The free RAM is about - 20 -22 MB(with cube ,and HTC HOME running)
Free Storage :- 35 Mb.
Known Bugs:-
1.Extended ROM does not get unlocked(looking for a solution)
2.A2DP problems
3.Disabling Or Enabling Home Plugins Requires Soft Boot now..
RAPIDSHARE
4SHARED
INSTALLATION
1. Put device to bootloader mode: (CAMERA+RESET)
2. Connect device to PC under Windows XP using USB cable
3. Run the executable DSUU.EXE
4. Follow on-screen procedure
After installation is complete , on the first boot you will be asked to install programs , please dont skip any one of them as this may result in malfunction .. , and also install 1 ,2 ,3 ,4 ,5 ,6 ,7 .cab files on your phone memory when prompted ..
IMPORTANT NOTE- 2.CAB ASKS FOR REBOOT WHEN INSTALLED PRESS CANCEL(right soft key) AFTER YOU INSTALL IT AS OTHER APPLICATIONS HAVE TO BE INSTALLED TOO..(sry forgot to edit..)
PLEASE DONT SKIP ANY INSTALLATION..
After all the programs are installed and you have rebooted once ..
Go to Programs MENU and open SIM MANAGER ,copy all your contacts to phone memory .
NOW REBOOT AGAIN..
You might notice bit slowness during first few startup but dont worry ...it will only be for a few seconds after which everything works smoothly..
After this you are all set to go , the left softkey opens up Action Manager which gives you quick access to new messages etc.. , the right key opens up the new contacts application .
A DOWN TO UP MOVEMENT ON THE SCREEN WOULD RESULT IN OPENING OF THE CUBE.
WHEN THE CUBE IS OPENED YOU CAN CLOSE IT BY SNIPPING YOUR FINGER UP TO DOWN.
FURTHER NOTES :-
1. I have also included Flash Video Bundle in an seperate folder when you UNRAR the rom ... you can install it along with TCPMP player(also included.) to view sites like Youtube etc..
2. In the Previous ROM Slide to Unlock was included by default ,this time i have included it as an optional .cab setup so incase you are interested you can simply install it , Note - You don't need to change the skin as thats all preconfigured in a custom CAB
So i am now uploading and the link will be up soon also , will be posting some screenshots..
Special Note:
This is NOT an OFFICIAL ROM. You can not expect support from O2 by bringing in your device with this ROM. Neither should you contact them for support on this ROM. By downloading and upgrading your device with this ROM, you agree to the considerable risk of bricking your device; and that I can not be held liable for damage brought about by the usage of this ROM.
Side Note: This will not SIM unlock or change your mobile serial no. (IMEI) in any way. You can flash back to original ROM anytime! Do not attempt to flash this on ATOM EXEC! If you get COUNTRY ID ERROR, you did not follow steps above. Do NOT restore from spb / sprite full backup, this will overwrite system files and make your device unstable; worse, unusable.
NEVER ATTEMPT TO UPDATE YOUR DEVICE USING SD CARD FLASHING!!!
I am currently using, jiggs rom 0.7a. and i'd like to give a try on yours but where can i get that mate? Cpacubo...
Rapidshare mirror is up now..mate..
Please READ THE INSTALLATION INSTRUCTIONS CAREFULLY
MMS problem solved?
Does this ROM solve the MMS problem on the previous version?
In the previous version of this ROM, I am having problems receiving MMS even after I do Auto COnfiguration and a Soft-Reset. I did not have this problem when I was on JIGG's AKU070.
I can't really say...but i think it should..man coz nothing at all related to MMS has been touched from the AKU.7A ..so i guess it will..
Sorry i can not check as i dont hv MMS activated..
hi too all
Great work
Hope in this one UNknown contact problam has been sort out.
good rom.
but i have a few questions.
1. is it compatible with atom life?
2. after updating to this rom. can i still use the wisbar to make my phone look like an iphone?
3. does this rom include touchflo already?
4. if i am on the "iphone" theme of wisbar, can i still use touchflo?
thanks!
@t3dong
1.NO
2.Yes
3.Yes
4.-Dont Know-
Thanks , this one works very well..
Ok, thanks a alot. I've downloaded it and will soon reflash my atom with this one... Can't wait to see the cube on mine..
Remember to read instructions carefully, sorry for repeating again but this is very important..
...IMPORTANT NOTE- 2.CAB ASKS FOR REBOOT WHEN INSTALLED PRESS CANCEL(right soft key) AFTER YOU INSTALL IT AS OTHER APPLICATIONS HAVE TO BE INSTALLED TOO..
Thaks 4 quick replay mate. I will follow your instructions...
wow awesome! what a good-looking rom. i love it very much. You've done a great job mate... keep up the good work. so far there's no problem with this rom. the cube turn nicely to the left and right. the other htc application are good as well. Oh ya, one thing, after i install Audio Booster, the skin of audio manager return to blue not black anymore but it's functioning well. Once again thank you for giving a new look and life to black atom!
can't seem to make the cube work...also the icontacts show nothing...am I missing something?
Yes , you are ..did you care to read the instructions..........please read them
Icontacts works after you have copied all contacts to phone memory..
As for the cube i would suggest you to read the instructions carefully , install all application..in phone memory..
No need to reflash just to a HARD-BOOT(Power +RESET) and follow instructions..
Hope it works this time
Yeah I read them very much..before running the ROM anyway, I did try to do Hard Reset to redo the installation of the cab files but it always hangs up after the 4.cab installation...I'm doing a reflash of the ROM from bootloader to try..
Thanks responding..will let you know
I reflashed...I don't get it...I get the Quick Launch Soft Key on the left but as per instruction it supposed to be the Action Manager
And did u swipe your finger DOWN TO UP on the screen to activate the cube mate??
udayrulz said:
And did u swipe your finger DOWN TO UP on the screen to activate the cube mate??
Click to expand...
Click to collapse
cool!
now u become rom creater. hehe. power!!! must pass down ur skill to me.
udayrulz said:
And did u swipe your finger DOWN TO UP on the screen to activate the cube mate??
Click to expand...
Click to collapse
yup..a few times..also I noticed it hangs so much..it only responds to up and down movements..not the left and to the right...
Anyone having trouble installing .net cf 3.5 after upgrade to DCD 3.1.2 ROM? I keep getting an error message.
Anyone having trouble installing .net cf 3.5 after upgrade to DCD 3.1.2 ROM? I keep getting an error message.
Click to expand...
Click to collapse
.NET cf 3.5 is already included in 3.1.2. No need to install it. Probably why you're getting error messages.
ah. that makes sense. thanks.
gc14 said:
.NET cf 3.5 is already included in 3.1.2. No need to install it. Probably why you're getting error messages.
Click to expand...
Click to collapse
when i try to run live search says i need to install net3.5??? im on dcd 3.1.2 and i get the same error when i try to install
I found this on MSDN forum and it worked for me.
Problem solution:
Giving the installation error:
"Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution:
1. download mobile registry editor
2. delete entry \local machine\software\microsoft\netcompactframework (delete all of it)
3. re-install net compact framework 3.5
I take no responsibility for any problems that you may encounter after editing your registry. As always, proceed at your own risk.
I don't know what the problem was on your phones....maybe a bad flash...
3.1.2 has cf 3.5. It's located in the SYS folder of your kitchen in a directory called NetCF35 and gets cooked in.
not sure. but net 3.5 didnt show up in list of programs until i installed it myself. i probably already had it. no harm no foul.
prattner said:
I found this on MSDN forum and it worked for me.
Problem solution:
Giving the installation error:
"Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution:
1. download mobile registry editor
2. delete entry \local machine\software\microsoft\netcompactframework (delete all of it)
3. re-install net compact framework 3.5
I take no responsibility for any problems that you may encounter after editing your registry. As always, proceed at your own risk.
Click to expand...
Click to collapse
Great tip!
This worked for me with the same problem installing NETCFv35 on a Diamond.
prattner said:
I found this on MSDN forum and it worked for me.
Problem solution:
Giving the installation error:
"Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution:
1. download mobile registry editor
2. delete entry \local machine\software\microsoft\netcompactframework (delete all of it)
3. re-install net compact framework 3.5
I take no responsibility for any problems that you may encounter after editing your registry. As always, proceed at your own risk.
Click to expand...
Click to collapse
Does 3.5 contain everything that 2.0 has? Meaning will programs running with 2.0 work the same with 3.5?
yes
i have not seeen the case where having 3.5 installed gives you an error for not having 2.0
GeLopez said:
yes
i have not seeen the case where having 3.5 installed gives you an error for not having 2.0
Click to expand...
Click to collapse
Well, I tried what was suggested and it still didn't work.
prattner said:
I found this on MSDN forum and it worked for me.
Problem solution:
Giving the installation error:
"Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution:
1. download mobile registry editor
2. delete entry \local machine\software\microsoft\netcompactframework (delete all of it)
3. re-install net compact framework 3.5
Click to expand...
Click to collapse
Worked great! Thanks for the tip. It was driving me crazy
prattner said:
I found this on MSDN forum and it worked for me.
Problem solution:
Giving the installation error:
"Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution:
1. download mobile registry editor
2. delete entry \local machine\software\microsoft\netcompactframework (delete all of it)
3. re-install net compact framework 3.5
I take no responsibility for any problems that you may encounter after editing your registry. As always, proceed at your own risk.
Click to expand...
Click to collapse
YEES! Works HTC TOUCH HD BLACKSTONE
or by changing the DWORD Value! NET CF 2.0 to replace its dword value to = 0, whereas NET CF 3.5 dword value = 1
I need to get .net compact framework 2.0 on my 8525 in order for my ifonz to run but all the links I have tried to download from do nothing. I click on the download link and it opens up the thank you page but I am never prompted to save or run the setup.
Rob D said:
I need to get .net compact framework 2.0 on my 8525 in order for my ifonz to run but all the links I have tried to download from do nothing. I click on the download link and it opens up the thank you page but I am never prompted to save or run the setup.
Click to expand...
Click to collapse
yes you need to run that file while plugging your phone to the pc with active sync. or you can get the cab from my 4shared I think if not I will upload will check shortly.
I finally got it. I had to download the file then unzip it then transfer it to the phone. I guess the phone didn't like the zip file format :/ got the ifonz program working great now.