Hi,
I'm not sure but i think my screen needs to be replaced. Example: I put my finger on top of the screen trying to select top contact and instead of selecting contacts from top is selecting contact at the bottom of screen. The same problem is with any other apps. To solve this problem I need to switch the screen off and then switch on again. But it's happening very often now and it's pissing me off. Few month ago I have cleaned my screen from inside (there was some dust under the plastic screen. Obviously now i can't send it for warranty. Do I need to replace scr ? Does anyone has had similar problem.
Regards
Related
So there's a (what I thought was a dead spot) sensitive spot near the top of my screen. It's about an inch tall and spans the whole screen wide. If you press normal to hard it'll do a instant single click. But I found out if you touch it really lightly it'll function like normal.
Now the weird part is it stays w/ the rotation. If you turn it upside down or sideways the bar always effects the same icons and widgets in its path so I don't believe its a hardware problem.
Anyone else have this problem?
i'm assuming you're using a 101 as this seems to be a normal defect of the device. there is a fix where you have to dig inside your archos to get rid of the flex or you can just make a habit of lightly touching it. it's a pain trying to drag widgets on the screen b/c of this.
you can try to recalibrate the screen to see if it may help any.
Yea on a 101 and the recalibrate doesn't help. What is this fix your talking about?
Sent from my htc EVO
The fix that madsquabbles is referring to can be found here:
forum.archosfans.com/viewtopic.php?f=74&t=41717
(You will have to copy and paste the link. I don't have enough posts to enter a URL. )
I have also read that it may go away with time and multiple recalibrations, or that it may be caused by a "rogue" application and/or widget that has issues with the device.
http://forum.archosfans.com/viewtopic.php?f=74&t=41717
Try that one.
I've changed screen on my Flyer. Repair parts were from working tablet with dead battery controller. So I simply replace donor's mainboard with mine. Now I've got this kind of problem: middle part of screen (where upper row of letters is situated in portrait mode) handles my touch like multitouch of near area. For example, I press Backspace, and screen shows touch of Backspace and 0. Other parts of screen works fine. I've made calibration reset, hard reset but nothing gone. Please help me to find solution. Any help would be appreciated
Dear friends, see this, see in the youtube:
watch?v=ixWozCI8sek
I activated the phone in their own settings of android to show screen touches and strokes that you can see in the video above, and installed YAMTT app to better show the problem.
The Problem on mobile touch in the middle of the screen there is a track that is not recognized touch, but if I press the screen sinking, she returns to work temporarily, and now recognizes the touch - but after a few minutes the problem back and touch is not recognized again.
The screen is perhaps dished up, and when I press down her back to be in contact with the part of the cell that recognizes the touch, but with time the screen should be getting back dished up (this is my guess, not i'm sure).
Detail, not always when I press is running, sometimes I press the screen to the center of the touch again be recognized, but it seems that the phone is registering touches alone.
What would be a solution, and change the screen (it does not mean that changing the screen the problem solved), want to try other alternatives before changing the screen.
Perhaps heating up the screen with hot air, in theory it will expand and become more pliable, and then if I press down the center panel of the phone with something for a while until it cools, in theory the screen would remain indefinitely, and if that is the problem could solve -
Anyone have any thoughts, has been there?
Thanks in advanced!
Hello,
Unfortunatel my device seems to have some kind of malfunction.
The Issue is that the devices suddenly locks andd just shows the clock.
I can`t unlock it. After a while it might show the normal screen and I can unlock it.
Then the clock comes back and I can`t do anything.
I reinstalled with wipe all everthing however after a while it will come back.
https://www.pic-upload.de/view-33958545/DSC03631.jpg.html
Any help is appreciated
Check for smart cover option in smart assistance
Turn it off. The pic you posted comes when you use flip cover (when closed )
Have u applied any sceen protector covering upper right (nr front cam) side of screen it may cause this
There a proximity sensor and one other idnt know name but it should be uncovered when using phone.
Or the sensor is misbehaving.
vespin said:
Hello,
Unfortunatel my device seems to have some kind of malfunction.
The Issue is that the devices suddenly locks andd just shows the clock.
I can`t unlock it. After a while it might show the normal screen and I can unlock it.
Then the clock comes back and I can`t do anything.
I reinstalled with wipe all everthing however after a while it will come back.
https://www.pic-upload.de/view-33958545/DSC03631.jpg.html
Any help is appreciated
Click to expand...
Click to collapse
That may be smart cover problem
Good day, I have a problem with the phone of Jinga Basco m500, Sometimes the upper part of the screen is pressed spontaneously.
Is it possible to somehow disable the part of the screen that I need. What would the screen not react to the touch in this part ? How to do it ? with the help of which programs ?