phone have spl-1.16(was in phone,i don't make hardspl) but when i try write an cooked rom phone stop at 75% and now start in bootloader with power on+camera buton, with power on buton phone start in white screen and one vibration.
i try something with mtty but i don't understand very goog the procedure,i need a memory card insert in phone or without memory card?
when i start mtty and write first comand:
Cmd>password BsaD5SeoA
Pass.
HTCST ÚÈÒHTCE
Cmd>
i don't know what do now
can help me somebody?
thanks
nobody can help me?
iugo said:
nobody can help me?
Click to expand...
Click to collapse
I can try, can you tell me what is written in your bootlader and stop using mtty.
Regards,
in left screen writte:
NIKI100
SPL-1.16.0000
CPLD-4
and in down screen write SERIAL without cable in phone and when i insert cable in phone write USB
iugo said:
in left screen writte:
NIKI100
SPL-1.16.0000
CPLD-4
and in down screen write SERIAL without cable in phone and when i insert cable in phone write USB
Click to expand...
Click to collapse
Thanks, just download This rom after download just connect you're phone to your computer, make sure your phone is in bootloader and run the exe from the download this will flash the original rom, if everything is ok, you will have the original wm 6.1 rom after that you need to Hardspl your phone, just read this Thread.
Just keep me informed if the original rom can not be flashed.
Succes buddy
dont'n work ,stop at 1% after that phone restart in white screen. i attached file with error.
In which language was your original rom ?
before was in italian language
iugo said:
before was in italian language
Click to expand...
Click to collapse
Here is the link for Italian, try to do the same as I mentioned before, just make sure active sync or wmdc is turned off.
Greetz,
thanks man,with that rom phone work, now can instal hardspl 1.22? is ok that hardspl?
iugo said:
thanks man,with that rom phone work, now can instal hardspl 1.22? is ok that hardspl?
Click to expand...
Click to collapse
Yep buddy, that's ok, now you can do the Hardspl as I mentioned before, just read carefull.
Succes,
now work with new rom cooked, i see in phone gps antena,have integrated gps antena? wi-fi suport?
iugo said:
now work with new rom cooked, i see in phone gps antena,have integrated gps antena? wi-fi suport?
Click to expand...
Click to collapse
Perfect it worked for you, enjoy your cooked rom, and sorry no wifi, the gps is for communication with an external gps receiver.
Greetz,
ok, thanks for your help.
Related
Hi does anyone know if there are WM6 ROMs for the SPV C550 if not are there any good WM5 ones?
look topic about wm5 for hurricane, there are also links to wm6 for hurricane device
hello again
here is latest, almost perfect rom for hurricane:
http://rapidshare.com/files/56833250/566.zip.html
and new SPL for this device:
http://rapidshare.com/files/56616745/spl566wm6_spfans2006.rar
lazaj007 said:
hello again
here is latest, almost perfect rom for hurricane:
http://rapidshare.com/files/56833250/566.zip.html
and new SPL for this device:
http://rapidshare.com/files/56616745/spl566wm6_spfans2006.rar
Click to expand...
Click to collapse
Has anybody tried this ROM?
lazaj007 said:
hello again
here is latest, almost perfect rom for hurricane:
http://rapidshare.com/files/56833250/566.zip.html
and new SPL for this device:
http://rapidshare.com/files/56616745/spl566wm6_spfans2006.rar
Click to expand...
Click to collapse
Ideal thanks
So is the 566.zip the WM5 or WM6 rom and has it been tested?
Whats the new SPL?
hI ALL, can u tell me the mini guide how to install this rom? I did it once to my sda but I dont remember now, where is the nbfupdatetool and RUU and patched RUU..???
when I type l c:\wm6.bin it give me this:
clean up the image temp buffer at 0x8C080000 Length 0x01B00000 MTTYDownloadImageNot allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
cmd>
maybe damaged rom, or any idea?
Gang: Make sure you're CID unlocked. (Eg, when you issue "info 2", it says HTCSuperCID).
How can do that cid unlock? give me some working link to download that tool or something. thx
here you go
http//www.spv-developers.com/content/SPV-Services.zip
you must check "CID Tool (Alpha)" and click set CID=11111111
after this restart your phone
and short solutions about wm6 installing:
* installation is the same like typhoon
-unlock Super CID
-upgrade new SPL (Patched ruu)
-disable USB connection in ActiveSync
-switch off your phone
-press and hold camera button, and put USB cable to your phone
-next check "Y"
-when your phone will be in bootloader mode (tri color screen) run mtty
- check USB connection in this program
and write: - info 2
- format BINFS
- l c:\566.bin (localization of your rom)
after succeful installising reboot your phone and it will be end
rom is very good, baterry work better
hmm, thx for guide, I believe it will work, but I have little problem : now I cant even connect to activesync so I cant do cid unlock, any idea how to fix that
lazaj007 said:
here you go
http//www.spv-developers.com/content/SPV-Services.zip
you must check "CID Tool (Alpha)" and click set CID=11111111
after this restart your phone
and short solutions about wm6 installing:
* installation is the same like typhoon
-unlock Super CID
-upgrade new SPL (Patched ruu)
-disable USB connection in ActiveSync
-switch off your phone
-press and hold camera button, and put USB cable to your phone
-next check "Y"
-when your phone will be in bootloader mode (tri color screen) run mtty
- check USB connection in this program
and write: - info 2
- format BINFS
- l c:\566.bin (localization of your rom)
after succeful installising reboot your phone and it will be end
rom is very good, baterry work better
Click to expand...
Click to collapse
Thanks for helping out!
A few questions?
1. This link "http//www.spv-developers.com/content/SPV-Services.zip" takes me to Wikipedia.
2. Where can I find the patched ruu to update the spl. It wasn't in the zip file?
Thanks in advance!
to Mr MIAGY :
1. just write that link starting with www. (without http//, or type http://)
2. in ''wm6 for c550'' topic u will find patched RUU and all needed files, they are ziped together
gangstaunitg said:
to Mr MIAGY :
1. just write that link starting with www. (without http//, or type http://)
2. in ''wm6 for c550'' topic u will find patched RUU and all needed files, they are ziped together
Click to expand...
Click to collapse
DoH! I didn't notice the missing ":"
Cheers!
Anybody have idea why I cant connect to activesync after spl upgrade ? Before spl upgrade it all goes well. Can I do something with it?
if upgrade was complited succes then you must turn off USB connection in Active sync, then run bootloder mode and do everything with instructions.
I did it !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
THank u all, thankS
This rom is amazing, everything work perfect, and it looks beautiful,
one more time thank you. jUUHHHUUUUUUUUU
lazaj007 said:
if upgrade was complited succes then you must turn off USB connection in Active sync, then run bootloder mode and do everything with instructions.
Click to expand...
Click to collapse
Upgrade reported as success
However after reboot I see the WM6 boot screen - loverly ...
Then the Mobile Operator Splash screen ... THEN
After too long ... the phone switches itself off and I have to take the battery out to get reponse again.
Any ideas?
It's a C550 ....
MrMiyagi said:
Upgrade reported as success
However after reboot I see the WM6 boot screen - loverly ...
Then the Mobile Operator Splash screen ... THEN
After too long ... the phone switches itself off and I have to take the battery out to get reponse again.
Any ideas?
It's a C550 ....
Click to expand...
Click to collapse
Ok, so a report. The phone boots, goes through WM6 splash screen, then operator screen, then APPARENTLY dead black screen.
BUT I plugged in the USB cable and the screen came on! WM6 Setup screen! All good go through setup eveything looks GREAT!
Only problem is, if I leave the phone alone for a bout a minute, the screen goes black AGAIN. Then no amount of key pressing on the device will bring it back to life.
Plugging the USB cable in brings it instantly back to life! But This means I can't wander too far from my PC ;-)
ANY Ideas
BTW IT LOOKS FANTASTIC! If I can just get around this issue ;-)
MrMiyagi said:
Ok, so a report. The phone boots, goes through WM6 splash screen, then operator screen, then APPARENTLY dead black screen.
BUT I plugged in the USB cable and the screen came on! WM6 Setup screen! All good go through setup eveything looks GREAT!
Only problem is, if I leave the phone alone for a bout a minute, the screen goes black AGAIN. Then no amount of key pressing on the device will bring it back to life.
Plugging the USB cable in brings it instantly back to life! But This means I can't wander too far from my PC ;-)
ANY Ideas
BTW IT LOOKS FANTASTIC! If I can just get around this issue ;-)
Click to expand...
Click to collapse
Heh heh ... seems I'm posting to myself ... that's cool I like my own company ... So I reflashed the SPL and some of the problems have gone away.
Phone will boot OK now ... but it will still "go to blank screen" and require plugging into the USB cable to "wake it up"
I'm out of ideas now ...
First of all, Hi!
Now, how do I clear my nike to the point where it has nothing on it?
I need to do this because I got stuck in the process of flashing it with HARDSPL 1.22 that I need in order to flash a new rom!
I tried everything, I followed the guide on how to do HardSpl, but got stuck at step 8 of the tutorial, the process bar is constantly at 0%, and followed by recovery steps!
I do not need them because everything works just fine, only with the original rom still on!
So I want to flash a rom, but am unable to!
Please help me!
Even if my solution is deleting everything ( I do not mean a Hard Reset- Did that 10 times ) and starting from 0!
But this is one thing I never did, and do not know where to start or what to do!
So any good soul out there willing to help, please do so!
Thanks in advance!
Ok let's try to help, can you tell us more details about your phone, model 16 or 20 keys, rom and radio.
If this is not clear just send me a pm
Regards Rataplan
Thanks, mine is a 16 key version.
Radio 1.65.28.25
Rom: 2.09.405.1
Rom date: 30.08.2008.
Protocol version: 25.98.40.07H
And I did the first few steps of flashing the HardSpl
and now it says SPL 1.22
and further more, on start up screen it says "TEST ONLY NOT FOR SALE"
BTW: I was looking of flashing your ROM but as I said, no can do!
HELP
Ok from what I see it looks to me that you already flashed a rom, just one question is it telling SPL 1.22 or SPL 1.22 Hard
just SPL
That is my problem!
Any solution!?
You need to start all over again, do you have a Niki, you can see that under the battery
Okay just read your post in the other thread, that cleared a lot of things, just do it all over again and use 1.15 instead of 1.22 maybe that will work for you, btw from what I can see you didn't do anything wrong, I also flashed directly the 1.22 and from me that works.
Just keep me informed how it goes.
Regards
The phone is niki100
There is no simlock!
What do I need to do?
Refer me to a tutorial, or just tell me everything here?
And thank you for the help so far!
Edit:
OK, I did what you said, and so far works!
But, could you please explain to me a couple of things!
1. download the attached files DONE
2. REMOVE SIM and SD CARDS !! DONE
3. connect usb cable DONE
4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!) DONE
5. after a few seconds "USB" appears on the display DONE
6. unplug and replug the usb cable DONE
(OPTIONAL, better to skip it! step 7. if you only want to test the sspl try flashing the attached splash screen by running ROMUpdateUtility.exe from flash-splash-niki) SKIPPED
8. you can now flash the hardspl-1.15mfg-nike.nbh by running ROMUpdateUtility.exe from flash-uspl-niki
AND NOW here is my question, in the file FLASH-USPL-NIKI there is a uspl-1.16-nike.nbh file, but here in this step it says to flesh the 1.15mfg(wich I downloaded), so do
i have to delete the 1.16 and replace it with the 1.15mfg or what?
9. after installing the hardspl you can flash any rom (rom cook project here)
Okay I think I kow what you mean, you must flash the 1.15mfg, do not copy it to your phone, you don't have to delete the 1.16.
EUREKA, it worked!
Flashed your F01-10 rom!
Now I only did the 1.15 HARD Spl
Please suggest to me a radio?
I tried flashing the Radio_1.71.09.01_25.75.40.02K and it got to 100% and then said FLASH WRITE ERROR, so I was stuck wit the old radio!
AND OMG, THE ROM IS WONDERFUL
Thank you so very very much!
I need help, i have flashed a rom but now my niki stops at the radio details. It doesn't boot to windows mobile.
How do i reflash a working rom now?
How long have you waited before taking out the battery?
It takes a while to load!
It takes a while to load yes, but 5-10 minutes is to long for it to start to boot.
It has passed 1 hour now.
Anyone knows how can i fix my niki?
2 die 4 said:
EUREKA, it worked!
Flashed your F01-10 rom!
Now I only did the 1.15 HARD Spl
Please suggest to me a radio?
I tried flashing the Radio_1.71.09.01_25.75.40.02K and it got to 100% and then said FLASH WRITE ERROR, so I was stuck wit the old radio!
AND OMG, THE ROM IS WONDERFUL
Thank you so very very much!
Click to expand...
Click to collapse
You're welcome for the rom, about the radio if you want to try the 1.71 radio you have to go back to an older radio before you flash the 1.71.
I suggest to use a 1.5.. radio, that will do the trick.
For now you can always put Hardspl 1.22 on your phone, some people are recommended that if you flash a wm 6.5 rom, personally I don't see any difference.
Btw The radio I use is 1.65.29.22
Regards
masterxiter said:
It has passed 1 hour now.
Anyone knows how can i fix my niki?
Click to expand...
Click to collapse
Hmm, that's a long time without a phone , did you already try a hardreset, just turn the phone off, and turn it on by pressing the power and the send and end key on the dame time, I think that will do it.
Just keep me informed.
Regards
Rataplan said:
Hmm, that's a long time without a phone , did you already try a hardreset, just turn the phone off, and turn it on by pressing the power and the send and end key on the dame time, I think that will do it.
Just keep me informed.
Regards
Click to expand...
Click to collapse
Yes it enters restore mode. If i have the usb cable, when the restore finishes, on the pc it says "unrecognized usb" / Unknown device. I reboot the phone and its the same.
masterxiter said:
Yes it enters restore mode. If i have the usb cable, when the restore finishes, on the pc it says "unrecognized usb" / Unknown device. I reboot the phone and its the same.
Click to expand...
Click to collapse
Hmm, okay this will be diffucult, I've read you flashed a rom and after that you get this issue, just a few questions did you cid unlock your phone, and is the bootloader still there. (that is the 4 coloured screen with the spl info)
masterxiter said:
Yes it enters restore mode. If i have the usb cable, when the restore finishes, on the pc it says "unrecognized usb" / Unknown device. I reboot the phone and its the same.
Click to expand...
Click to collapse
hey dude
y dont u flash the original rom of htc nike once and then retry?
Rataplan said:
Hmm, okay this will be diffucult, I've read you flashed a rom and after that you get this issue, just a few questions did you cid unlock your phone, and is the bootloader still there. (that is the 4 coloured screen with the spl info)
Click to expand...
Click to collapse
Yes i have both.
I allready change those 4 colors for an image, lol but ok i have the spl info:
M 04
B 04
R 1.65.28.25
G 25.98.40.07W
D 2.12
What happened was, i had an working cooked rom flashed in my phone. I was working with it for about a month.
yesterday i flashed with another one. It got me 100% rebooted and voilla doesn't pass the spl boot.
masterxiter said:
Yes i have both.
I allready change those 4 colors for an image, lol but ok i have the spl info:
M 04 R 1.65.28.25
B 04 G 25.98.40.07W
D 2.12
Click to expand...
Click to collapse
Ha ha yeah that would be nice if we could replace that for an image.
Okay, connect it to your computer when you're on the 4 coloured screen and see if it connect then, in the phone you see serial changing in usb, if yes just flash your original rom.
Hi, sorry for capitalized title...
I searched and tested for weeks for a solution in this helpful and very professional forum... but I still haven't found a trick for my problem:
I have a NIKI100 - 20key that ActiveSync doesn't recognize (usb port still charge in Windows environment but no data transmission seems to work).
I tried many PCs with many OS, and now I can say that THIS IS NOT A SOFTWARE PROBLEM (or not?).
So i tried SD flashing, and it works only with signed ROM, so I can't flash WM 6.5
Because of USB issue, I can't flash HardSPL.
MTTY doesn't find the NIKI on COM or USB port.
The question is:
Is there a way to flash HardSPL via SD or is there a signed ROM with WM 6.5??
THANKS A LOT IN ADVANCE!!!
ROM: 2.16.831.3
Radio: 1.65.29.22
NIKI100
SPL-1.22.0000
CPLD-4
Marshalll said:
Hi, sorry for capitalized title...
I searched and tested for weeks for a solution in this helpful and very professional forum... but I still haven't found a trick for my problem:
I have a NIKI100 - 20key that ActiveSync doesn't recognize (usb port still charge in Windows environment but no data transmission seems to work).
I tried many PCs with many OS, and now I can say that THIS IS NOT A SOFTWARE PROBLEM (or not?).
So i tried SD flashing, and it works only with signed ROM, so I can't flash WM 6.5
Because of USB issue, I can't flash HardSPL.
MTTY doesn't find the NIKI on COM or USB port.
The question is:
Is there a way to flash HardSPL via SD or is there a signed ROM with WM 6.5??
THANKS A LOT IN ADVANCE!!!
ROM: 2.16.831.3
Radio: 1.65.29.22
NIKI100
SPL-1.22.0000
CPLD-4
Click to expand...
Click to collapse
Can you tell me what happens when you connect your device with your computer, when it is already in bootloadermode.
You can turn the phone in bootloadermode to turn your device off and press then on/off button and camera button on the same time, and keep them pressed until bootloader appears.
If I'm correct you will see Serial in the white block, just let me know what you see in the white block when you connect the phone with the computer, if I'm correct Serial will change in Usb, if not just let me know.
Greetz,
Tnx for reply...
I see USB when I connect the cable, Serial when I disconnect the cable.
I'm searching for a SD-card-method for flashing HardSPL: is this a good idea or I'm just wondering ?
Marshalll said:
Tnx for reply...
I see USB when I connect the cable, Serial when I disconnect the cable.
I'm searching for a SD-card-method for flashing HardSPL: is this a good idea or I'm just wondering ?
Click to expand...
Click to collapse
Ok, can you tell me if you're device has a simlock ?
Greetz,
Hi.
No simlock.
Tnx.
Marshalll said:
Hi.
No simlock.
Tnx.
Click to expand...
Click to collapse
Ok thanks, I'll do some searching and see if we can fix it.
Regards,
Ok, if I where in your situation I should try it this way, just be aware that I can not test it because I don't have such a problem, and you can brick your device if it went wrong.
1. Copy sspl-1.16-nike.exe to your sd-card
2. Copy sspl-1.16-nike.exe from your sd-card to your device
3. Turn phone off and remove sim and sd-card
4. Turn phone on and connect device to your computer
5. Run sspl-1.16-nike.exe on your phone
6. Wait until usb appears in your device
7. Unplug and replug the usb cable
8. Now flash the HardSPL 1.22
If you can run the HardSPL you should be able to flash a wm 6.5 rom.
Rataplan said:
Ok, if I where in your situation I should try it this way, just be aware that I can not test it because I don't have such a problem, and you can brick your device if it went wrong.
1. Copy sspl-1.16-nike.exe to your sd-card
2. Copy sspl-1.16-nike.exe from your sd-card to your device
3. Turn phone off and remove sim and sd-card
4. Turn phone on and connect device to your computer
5. Run sspl-1.16-nike.exe on your phone
6. Wait until usb appears in your device
7. Unplug and replug the usb cable
8. Now flash the HardSPL 1.22
If you can run the HardSPL you should be able to flash a wm 6.5 rom.
Click to expand...
Click to collapse
All right from 1. to 7. but when I run flashin it shows error code 260 (unable to connect).
Is there a way to run SPL "JUMP" and then flash HardSPL via SD card? I think it's the only way to flash HardSPL
Rataplan is the expert one on this area,
but wath is your operating system? Seven or XP?
Because i just was able to hardspl on XP, all other things I was able to do on Seven.
Marshalll said:
All right from 1. to 7. but when I run flashin it shows error code 260 (unable to connect).
Is there a way to run SPL "JUMP" and then flash HardSPL via SD card? I think it's the only way to flash HardSPL
Click to expand...
Click to collapse
Did you try to run the HardSPL 1.22 from the bootloader ?
Let me explain a little bit better, did you connect your device with your computer when your device is in bootloadermode and then run the HardSPL 1.22
If this fails, you can rename your nbh-file, hardspl-1.22-nike-shipped.nbh into nikeimg.nbh, copy nikeimg.nbh into the root of your sd-card and turn your device on while pressing the on/off button and the camerabutton on the same time and follow the instructions on the screen.
Succes,
Rataplan said:
Did you try to run the HardSPL 1.22 from the bootloader ?
Let me explain a little bit better, did you connect your device with your computer when your device is in bootloadermode and then run the HardSPL 1.22
If this fails, you can rename your nbh-file, hardspl-1.22-nike-shipped.nbh into nikeimg.nbh, copy nikeimg.nbh into the root of your sd-card and turn your device on while pressing the on/off button and the camerabutton on the same time and follow the instructions on the screen.
Succes,
Click to expand...
Click to collapse
Yes, I tried all of this method...The PC can't recognize the niki in bootloader mode.
When I put HardSPL on a tested sd-card (renamed NIKEIMG.nbh), I'm stuck in white screen with "Loading...".
I found some method for flashing HardSPL via sd-card (for Kaiser: http://forum.xda-developers.com/showthread.php?t=433835):
is there a SSPL Jump for Niki that run from sd (as with Kaiser sd-method)?
BTW, I think this is the right way... I'm trying and searching!
For Openview:
I tried with many PCs with XP Pro and 7. The niki usb port seems to be broken (only charges, but no data connection).
Nothing seems to work. If anyone has somethig for flash SSPL and HardSPL from SD, please post!!!
Any other ideas???
I think we tried everything but unfortunally the answer is that it isn't possible to flash the hardspl via sd, the only person you can ask is cmonex, she is the only one who can set this straight.
Here is her User cp but she is a very busy lady.
If you fix it, plse post it in this thread it can help others.
Goodluck buddy
Ok I'll try to contact mrs. cmonex. Of course, I'll post any solution (hope to find one... ).
Tnx for all!
SOLVED!
I solved the issue!! It was only a hardware problem with HTC ExtUSB port!!!
I cleared the pin and resoldered the port on motherboard. Then I flashed HardSPL via standard method and now I can flash anything form sd-card!!
Thanks to all.
Mr. Rataplan, now we can close this post!
Thanks!!
Great Marshalll, I'll ask Electroz to close this thread.
hi friends,
i have a htc dual touch with french language ,
i want to change the language to english ..
first i treid to do hard spl (getting error , not starting)SPL_1160000_Ship.exe
ps help me...
the info is
NIKI 100
SPL-10.16.0000
CPL4D
AND THE VERSION IS 131.71.09.........
and i have run the file
1."RUU_****_HTC_WWE_11340501_Radi.exe"
2.RUU_****_HTCASIA_AUS_13171012_.exe
3.RUU_****_HTC_WWE_2094051_Radio.exe
and the hard spl file "hardspl-1.22-****-shipped.zip"
but getting error
pls help me
info:
NIKI 100
SPL-1.16.0000
CPL4D
radio version:1.31.71.09
AND 1.58.16.27
* (1) i have tried with many rom file ... but its not starting(0%).. ,
(2i) ts starting in 1 or 2 file , but only run upto 1% and getting error
( 264, 294)
* i think the havent any network lock(country lock).. itw working with
all sim..
* I tried by pasting the "sspl-1.16-nike.exe" in phone , but same...
* i tried by repalcing the .nbh file as NIKEIMG.nbh and paste it in
mmc card after format ,but it is stuck on "LOADING"
*i tried to put the "spl-1.16-nike.exe" and NIKEIMG.nbh in mmc card
, then its not starting , stuck on the rainbow window...
some files are
1.ROMUpdateUtility.exe
2.hardspl-1.22-nike-shipped.zip
3.RUU_Nike_Radio_1581627_2561300.exe
4.Hard-SPL-Neon.zip
5.-HTC_Touch_Dual-HTC_P5520_ARA_1.31.415.15_1.58.21.24_Ship.rar
6.Niki-SuperCID-Security-Unlocke.rar
7.SPL_1160000_Ship.exe
8.hardspl-1.15mfg-nike.zip
9.sspl-1.16-nike.zip
pls help me
thanks in advance
can anybody tell me why its not starting even the hard spl??
ameerali19 said:
can anybody tell me why its not starting even the hard spl??
Click to expand...
Click to collapse
Sorry buddy, but you don't have hardspl and that is your problem, so you have to do the hardspl again.
Succes
sir
i have tried with these hrad spl files....
1.hardspl-1.15mfg-nike.zip
2.flash-hardspl-niki.zip
3.Hard-SPL-Neon.zip
4.hardspl-1.22-nike-shipped.zip
if i am wrong can you give me a good /working hard spl??
or how can i cid unlocikmthe phone(i dont know the phone is cid licked or not)
thanks in advance
Hi buddy, try this
1. Copy the sspl 1.16 to your phone.
2. Turned the phone off.
3. Removed sim and sd-card
4. Turn on the phone and launched sspl 1.16
5. Connect on computer and usb appears.
6. Running hardspl 1.22
Greetz,
i have already tried the procedure...
but getting error while click on hard spl... in file explorer(mobile)...
thanks for your reply
pls help me
ameerali19 said:
i have already tried the procedure...
but getting error while click on hard spl... in file explorer(mobile)...
thanks for your reply
pls help me
Click to expand...
Click to collapse
You have to flash the hardspl from your computer (same procedure as flashing a rom) while your phone is conncted to your computer and not try to run or launched it from your phone.
Greetz,
now its running suddenly to 100% and geting the error(244)
i have tried with the file
hardspl-1.15mfg-nike.zip
and
Hard-SPL-Neon.zip
pls help me
thanks in advance
Just do as I wrote above and don't try to use another Hardspl which is not ment for your device, because error 244 means that you have used the wrong RUU to do the upgrade.
If you have trouble's to flash the hardspl 1.22 just do it from the bootloader to get in the bootloader is turn your device off and turn it on while pressing the on/off button and the camera button on the same time.
Now you are in the bootloader (it's a 4-coloured screen with some text) connect your phone on your computer, phone must stay in bootloader and then flash Hardspl 1.22 from your computer.
That will do the trick.
Greetz,
sir
i have tried with hardspl-1.22-nike-shipped (1).zip
but not starting(0%).........................
and at last getting error ...
pls helpme
thanks in advance
run sspl1.16 on phone
disconnect USB cable
kill Active sync (or disable AS USB connections)
connect USB cable
run hspl 1.22
it must work...
or go to friend and do it on his computer...
ameerali19 said:
info:
NIKI 100
SPL-1.16.0000
CPL4D
radio version:1.31.71.09
AND 1.58.16.27
* (1) i have tried with many rom file ... but its not starting(0%).. ,
(2i) ts starting in 1 or 2 file , but only run upto 1% and getting error
( 264, 294)
* i think the havent any network lock(country lock).. itw working with
all sim..
* I tried by pasting the "sspl-1.16-nike.exe" in phone , but same...
* i tried by repalcing the .nbh file as NIKEIMG.nbh and paste it in
mmc card after format ,but it is stuck on "LOADING"
*i tried to put the "spl-1.16-nike.exe" and NIKEIMG.nbh in mmc card
, then its not starting , stuck on the rainbow window...
some files are
1.ROMUpdateUtility.exe
2.hardspl-1.22-nike-shipped.zip
3.RUU_Nike_Radio_1581627_2561300.exe
4.Hard-SPL-Neon.zip
5.-HTC_Touch_Dual-HTC_P5520_ARA_1.31.415.15_1.58.21.24_Ship.rar
6.Niki-SuperCID-Security-Unlocke.rar
7.SPL_1160000_Ship.exe
8.hardspl-1.15mfg-nike.zip
9.sspl-1.16-nike.zip
pls help me
thanks in advance
Click to expand...
Click to collapse
my phone niki touch dual cannot run sspl-1.16-nike.
when turns to 3 color then stop. pls help
addgsm said:
my phone niki touch dual cannot run sspl-1.16-nike.
when turns to 3 color then stop. pls help
Click to expand...
Click to collapse
Send me a pm and I'm gonna try to help you
Greetz
ameerali19 said:
sir
i have tried with hardspl-1.22-nike-shipped (1).zip
but not starting(0%).........................
and at last getting error ...
pls helpme
thanks in advance
Click to expand...
Click to collapse
i have same Problem ......
any other idea ?
Thanks.
denva said:
i have same Problem ......
any other idea ?
Thanks.
Click to expand...
Click to collapse
Hi denva, try it this way http://forum.xda-developers.com/showpost.php?p=11218363&postcount=701
Greetz,
Im having problems on installing wm 6.5 roms on my htc touch dual running on 6.1. Whenever i try to run sspl-1.16-nike.exe it just goes black and the word usb never comes up. Anybody know how to fix this. thanks in adance
coolcar65 said:
Im having problems on installing wm 6.5 roms on my htc touch dual running on 6.1. Whenever i try to run sspl-1.16-nike.exe it just goes black and the word usb never comes up. Anybody know how to fix this. thanks in adance
Click to expand...
Click to collapse
Ok, let's try to help you, can you tell me what you did exactly, because you need to remove your simcard and sdcard, after that you can run sspl-1.16-nike.exe from your device, not your computer.
If you did all that, turn your device off and press the on/off button and the camera button on the same time if 'm correct it will bring you in a four coloured screen, can you give me the info from that screen.
Greetz,
My phone doesent have a sim card so i just skipped that step.
Hi coolcar65, can you tell me what see in your bootloader, you can come in the bootloader by turning the phone off and press the on/off button and the camera button on the same time.
I also need to know if your device have a simlock.
Greetz,
it says
neon400 mfg
spl-0.27. cnvrsa
microP-NeonC (led) v4
coolcar65 said:
it says
neon400 mfg
spl-0.27. cnvrsa
microP-NeonC (led) v4
Click to expand...
Click to collapse
Ok, that's why you can not run the sspl 1.16 because the sspl 1.16 is for the Nike and not the Neon, they look the same but they are completly different from the inside.
You have to read this post that one is for the neon400.
Succes coolcar65
Thank you so much!