Related
Hi does anyone know if there are WM6 ROMs for the SPV C550 if not are there any good WM5 ones?
look topic about wm5 for hurricane, there are also links to wm6 for hurricane device
hello again
here is latest, almost perfect rom for hurricane:
http://rapidshare.com/files/56833250/566.zip.html
and new SPL for this device:
http://rapidshare.com/files/56616745/spl566wm6_spfans2006.rar
lazaj007 said:
hello again
here is latest, almost perfect rom for hurricane:
http://rapidshare.com/files/56833250/566.zip.html
and new SPL for this device:
http://rapidshare.com/files/56616745/spl566wm6_spfans2006.rar
Click to expand...
Click to collapse
Has anybody tried this ROM?
lazaj007 said:
hello again
here is latest, almost perfect rom for hurricane:
http://rapidshare.com/files/56833250/566.zip.html
and new SPL for this device:
http://rapidshare.com/files/56616745/spl566wm6_spfans2006.rar
Click to expand...
Click to collapse
Ideal thanks
So is the 566.zip the WM5 or WM6 rom and has it been tested?
Whats the new SPL?
hI ALL, can u tell me the mini guide how to install this rom? I did it once to my sda but I dont remember now, where is the nbfupdatetool and RUU and patched RUU..???
when I type l c:\wm6.bin it give me this:
clean up the image temp buffer at 0x8C080000 Length 0x01B00000 MTTYDownloadImageNot allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
cmd>
maybe damaged rom, or any idea?
Gang: Make sure you're CID unlocked. (Eg, when you issue "info 2", it says HTCSuperCID).
How can do that cid unlock? give me some working link to download that tool or something. thx
here you go
http//www.spv-developers.com/content/SPV-Services.zip
you must check "CID Tool (Alpha)" and click set CID=11111111
after this restart your phone
and short solutions about wm6 installing:
* installation is the same like typhoon
-unlock Super CID
-upgrade new SPL (Patched ruu)
-disable USB connection in ActiveSync
-switch off your phone
-press and hold camera button, and put USB cable to your phone
-next check "Y"
-when your phone will be in bootloader mode (tri color screen) run mtty
- check USB connection in this program
and write: - info 2
- format BINFS
- l c:\566.bin (localization of your rom)
after succeful installising reboot your phone and it will be end
rom is very good, baterry work better
hmm, thx for guide, I believe it will work, but I have little problem : now I cant even connect to activesync so I cant do cid unlock, any idea how to fix that
lazaj007 said:
here you go
http//www.spv-developers.com/content/SPV-Services.zip
you must check "CID Tool (Alpha)" and click set CID=11111111
after this restart your phone
and short solutions about wm6 installing:
* installation is the same like typhoon
-unlock Super CID
-upgrade new SPL (Patched ruu)
-disable USB connection in ActiveSync
-switch off your phone
-press and hold camera button, and put USB cable to your phone
-next check "Y"
-when your phone will be in bootloader mode (tri color screen) run mtty
- check USB connection in this program
and write: - info 2
- format BINFS
- l c:\566.bin (localization of your rom)
after succeful installising reboot your phone and it will be end
rom is very good, baterry work better
Click to expand...
Click to collapse
Thanks for helping out!
A few questions?
1. This link "http//www.spv-developers.com/content/SPV-Services.zip" takes me to Wikipedia.
2. Where can I find the patched ruu to update the spl. It wasn't in the zip file?
Thanks in advance!
to Mr MIAGY :
1. just write that link starting with www. (without http//, or type http://)
2. in ''wm6 for c550'' topic u will find patched RUU and all needed files, they are ziped together
gangstaunitg said:
to Mr MIAGY :
1. just write that link starting with www. (without http//, or type http://)
2. in ''wm6 for c550'' topic u will find patched RUU and all needed files, they are ziped together
Click to expand...
Click to collapse
DoH! I didn't notice the missing ":"
Cheers!
Anybody have idea why I cant connect to activesync after spl upgrade ? Before spl upgrade it all goes well. Can I do something with it?
if upgrade was complited succes then you must turn off USB connection in Active sync, then run bootloder mode and do everything with instructions.
I did it !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
THank u all, thankS
This rom is amazing, everything work perfect, and it looks beautiful,
one more time thank you. jUUHHHUUUUUUUUU
lazaj007 said:
if upgrade was complited succes then you must turn off USB connection in Active sync, then run bootloder mode and do everything with instructions.
Click to expand...
Click to collapse
Upgrade reported as success
However after reboot I see the WM6 boot screen - loverly ...
Then the Mobile Operator Splash screen ... THEN
After too long ... the phone switches itself off and I have to take the battery out to get reponse again.
Any ideas?
It's a C550 ....
MrMiyagi said:
Upgrade reported as success
However after reboot I see the WM6 boot screen - loverly ...
Then the Mobile Operator Splash screen ... THEN
After too long ... the phone switches itself off and I have to take the battery out to get reponse again.
Any ideas?
It's a C550 ....
Click to expand...
Click to collapse
Ok, so a report. The phone boots, goes through WM6 splash screen, then operator screen, then APPARENTLY dead black screen.
BUT I plugged in the USB cable and the screen came on! WM6 Setup screen! All good go through setup eveything looks GREAT!
Only problem is, if I leave the phone alone for a bout a minute, the screen goes black AGAIN. Then no amount of key pressing on the device will bring it back to life.
Plugging the USB cable in brings it instantly back to life! But This means I can't wander too far from my PC ;-)
ANY Ideas
BTW IT LOOKS FANTASTIC! If I can just get around this issue ;-)
MrMiyagi said:
Ok, so a report. The phone boots, goes through WM6 splash screen, then operator screen, then APPARENTLY dead black screen.
BUT I plugged in the USB cable and the screen came on! WM6 Setup screen! All good go through setup eveything looks GREAT!
Only problem is, if I leave the phone alone for a bout a minute, the screen goes black AGAIN. Then no amount of key pressing on the device will bring it back to life.
Plugging the USB cable in brings it instantly back to life! But This means I can't wander too far from my PC ;-)
ANY Ideas
BTW IT LOOKS FANTASTIC! If I can just get around this issue ;-)
Click to expand...
Click to collapse
Heh heh ... seems I'm posting to myself ... that's cool I like my own company ... So I reflashed the SPL and some of the problems have gone away.
Phone will boot OK now ... but it will still "go to blank screen" and require plugging into the USB cable to "wake it up"
I'm out of ideas now ...
So you got the nice QWERTY device eh? Nike Hard-SPL gives you a Model ID error? well, that'll be because you have a Neon.
Now, I've finally done a fully working Neon Hard-SPL, so, have at it as you desire:
instructions:
1)have device *SYNCED WITH PC, NOT IN SODDING BOOTLOADER*
2)run RomUpdateUtility
3)pay attention to device when loading bar appears on PC; say YES to any prompts and when it goes into SPL, UNPLUG AND REPLUG YOUR USB CABLE
after that it'll take care of itself
Has anyone tested this out yet??
im stuck with this...help
Hello
I don't flash my niki with hard-spl v2
When i flash i have a error message id model
When i modify model in nbh neon to niki i have message error file corrupted
Help me please
this is for NEON, do not flash it to your Nike, use the Nike Hard-SPL.
Olipro said:
this is for NEON, do not flash it to your Nike, use the Nike Hard-SPL.
Click to expand...
Click to collapse
Ok thank's
updated, works fully for all NEON devices
hey.. ok iv done this... now can you run me thru step by step on how to re-flash my device with a standard NEON ROM ??? i downloaded the original ROM but still dont allow to re-flash my branded device
nice job oli. time for some more beer i guess
BUFFBOY said:
hey.. ok iv done this... now can you run me thru step by step on how to re-flash my device with a standard NEON ROM ??? i downloaded the original ROM but still dont allow to re-flash my branded device
Click to expand...
Click to collapse
sure, shall I wipe your arse for you too?
Before i patch this in a NEON, can i flash with Niki Firmware???
thank u oli
Thanks
Quick & Easy... thanks
Thanks... This worked beautifully.
Ummm, OK I just tried this on my NEON300 Touch Dual US version and now my screen is stuck in Tri-Color mode:
RUUNBH
NEON300
SPL-0.95.0000
CPLD-3
USB
Is there a way for me to get back to my standard Windows Mobile screen setup?
bignerd972 said:
Ummm, OK I just tried this on my NEON300 Touch Dual US version and now my screen is stuck in Tri-Color mode:
RUUNBH
NEON300
SPL-0.95.0000
CPLD-3
USB
Is there a way for me to get back to my standard Windows Mobile screen setup?
Click to expand...
Click to collapse
Did you unplug the USB for 10 seconds then replug? Part of the recovery stage is taking out the battery, getting back to your original startup
bignerd972 said:
Ummm, OK I just tried this on my NEON300 Touch Dual US version and now my screen is stuck in Tri-Color mode:
RUUNBH
NEON300
SPL-0.95.0000
CPLD-3
USB
Is there a way for me to get back to my standard Windows Mobile screen setup?
Click to expand...
Click to collapse
"set 16 0" in mtty.
however, if you manage to get back to the OS... I'd like to see this 0.95 SPL
Hi there,
got the unlock code for a neon and when restart with the different sim card it asks for the unlock code but actual unlock button is disabled. any ideas how to fix this problem?
thanks
niki or neon?
Hi,
i use your 3 step to unlock my dual touch.....
it was 1.16 and now is 1.15.....
everything going well till step 3 where i get error 240.........
and now i see that all qwerty device are neon !!!!
i use the neon update rom but now it gives me error 260 after confirming yes 2 times on screen.....it dont whant to update.......
is it because i use Motorola usb cable ???
thanks for helping
Rectification not neon but niki 100
hi,
After verification the dual touch is niki 100....on back of batery and inside the phone..................
still not want to do step 3 error 240.....
Best regards
Hi everyone, I need help please. I am trying to flash a WM 6.5 ROM to my NIKI 100 (20 keys) but I cant seem to find a HardSPL that will work on my phone I always end up getting "ERROR[262]" I followed the steps to flash sspl-1.16-NIKE.exe on my phone in order to flash a HardSPL but still the same problem.
I have Official 2.09.405.1 ROM, Radio - 1.65.28.25. If I go into bootloader mode it shows: NIKI 100
SPL-1.22.0000
CPLD-4.
Is there anyone that can tell me wich HardSPL I need?? So far I"ve tried -
flash-HardSPL-Niki, HardSPL-1.15mfg-Nike, HardSPL-1.16.Nike, HardSPL-1.22-Nike-shipped and Flash-uspl-Niki.
Thanks
I hope this help
1. installed the SSPL installatoin, v1.16 (look at this thread http://forum.xda-developers.com/showthread.php?t=355730 for the installation)
you can skip step 7 and above.
2. Still in Bootloader screen, you can install HardSPL 1.22 using the installation files.
Dont worry about the step that device must connected to activesync just check the status and do next to update ROM. As long as your device is in bootloader mode (rainbow color) the update process can continue even you are not connected to activesync
3. Good luck
Has this been solved?
Heya Cyanide..
Has this problem been solved? If not, I reckon you should check this out: http://forum.xda-developers.com/showthread.php?t=377260
I have both the 16 keys and 20 keys versions of the HTC Touch Dual. And the confusing thing is, the 20 key version is not a Nike. It is actually a Neon 200 (or at least mine is). How do you tell?
Remove the back cover of the phone, and remove your battery... The label will reveal whether it is in fact a Nike or a Neon. If it's a Neon, then that explains why your attempts to Hard-SPL haven't worked to date.
Anyways, hit up that link above, and you should be able to Hard-SPL easily. If you need directions, let me know, but it should be fine... let us know how you go
HK 20key version is NIKI100
Hi dr3wster
Just FYI. In HK 20 keys version of the Touch DUAL says NIKI100 inside the battery compartment.
to be honest I'm confused over NIKI, NIKE, NEON now, but will keep reading.
dr3wster said:
Heya Cyanide..
Has this problem been solved? If not, I reckon you should check this out: http://forum.xda-developers.com/showthread.php?t=377260
I have both the 16 keys and 20 keys versions of the HTC Touch Dual. And the confusing thing is, the 20 key version is not a Nike. It is actually a Neon 200 (or at least mine is). How do you tell?
Remove the back cover of the phone, and remove your battery... The label will reveal whether it is in fact a Nike or a Neon. If it's a Neon, then that explains why your attempts to Hard-SPL haven't worked to date.
Anyways, hit up that link above, and you should be able to Hard-SPL easily. If you need directions, let me know, but it should be fine... let us know how you go
Click to expand...
Click to collapse
With wich OS you PC (not your HTC) is working?
The error message sounds to me like you are working with VISTA.
If so, try to do these steps on a XP system, and it should work.
Hi,
I made sure...underneath the battery it says NIKI 100.
I tried alot of hard spl's and nothing works.
MvSt said:
With wich OS you PC (not your HTC) is working?
The error message sounds to me like you are working with VISTA.
If so, try to do these steps on a XP system, and it should work.
Click to expand...
Click to collapse
I am working with XP and not Vista
me too have same problem with niki100
i have also same probelm under battrey writen niki100 i tried alot of things here
but not working .
i need a help to flash my niki100 to english
thanks
clickes2000 said:
i have also same probelm under battrey writen niki100 i tried alot of things here
but not working .
i need a help to flash my niki100 to english
thanks
Click to expand...
Click to collapse
Try it this way.
Greetz,
Hi to everyone,
I've read dozens of pages on how to do a HardSPL in Prophet G4, but i simply can't have success...
I've tried 4 or 5 methods that I found here, but none of them had been suceded...
I get a white screen, i get the 3 color screen, the connection fails...
I din't know what to do more... Can somebody help me, pleeeeeeeeaaaaaaaaaaaaseeeeeeeeeeeeeee....
I use Win XP Pro, and my Prophet gives me this info when I do Soft Reset:
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.734
I was already able to change ROM once, because I had it in portuguese and now is in english, and with other logos.
But what I would like was to install WM6.1 or 6.5...
The HardSPL *.bat file gives me this information, now:
"One or more CON code pages invalid for givem keyboard code"
"cerun:failed to execute program"
Can somebody give me some idea?
Thank you so much in advance!
I was in the same situation as you. You have to find the rom:
RUU_Prophet_220734_2207114_024721_NVID.exe
Search in the forum for the rom. After extracting the rom, run the file: ROMUpdateUtility_No_VenderID.exe.
It will survive your device. then you can install a wm6x rom from this site.
Don't forget to do hard spl your device next time.
Edit: It seems the rom is here:
http ://xvx45-spf.4shared.com/account/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
Also there is a "readme.doc" in the rom dir. Read the section 8. It is written for you.
keenblade said:
I was in the same situation as you. You have to find the rom:
RUU_Prophet_220734_2207114_024721_NVID.exe
Search in the forum for the rom. After extracting the rom, run the file: ROMUpdateUtility_No_VenderID.exe.
It will survive your device. then you can install a wm6x rom from this site.
Don't forget to do hard spl your device next time.
Edit: It seems the rom is here:
http ://xvx45-spf.4shared.com/account/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
Also there is a "readme.doc" in the rom dir. Read the section 8. It is written for you.
Click to expand...
Click to collapse
Hi keenblade,
I was able to do that. My PPC went with the 3 color screen, and then I user a rom with No vendor. I disabled USB connection in ActiveSync, and then I could do that. I brought my PPC back.
My problem is just the HardSPL... I just can't do it... I've tried so many tomes and with so many files that I think i need some straight orientation, or i don't know what was wrong...
In this moment i have the PPC with WM5, but what i really would like to do is make a HardSPL to install WM6...
Did you try "Prophet Upgrade" tool? Before running the tool, you have to connect with activesync.
keenblade said:
Did you try "Prophet Upgrade" tool? Before running the tool, you have to connect with activesync.
Click to expand...
Click to collapse
Yes, i've used Prophet Tools already...
I guess i'm doing something wrong... I've tried again now, and went again with the 3 color screen. I'm injecting a NoVendor Rom again.
When doing HardSPL, when the screen turns white, i must disconnect and reconnect device and just wait that software finishes, right? There is a moment that nothing happensm but then ActiveSync recognizes again the PPC.
I'm i right? I must do that again. It must be somtging that i'm doing wrong...
pt_satelite said:
When doing HardSPL, when the screen turns white, i must disconnect and reconnect device and just wait that software finishes, right?
Click to expand...
Click to collapse
When the screen turns white, I do nothing. Just wait. I don't disconnect and reconnect device. Maybe this is the problem. Do not touch the device when screen turns white. It will continue eventually. Also use the latest Prophet Upgrade tool v2.6.
Let's see what will happen.
keenblade said:
When the screen turns white, I do nothing. Just wait. I don't disconnect and reconnect device. Maybe this is the problem. Do not touch the device when screen turns white. It will continue eventually. Also use the latest Prophet Upgrade tool v2.6.
Let's see what will happen.
Click to expand...
Click to collapse
I got it! I've followed this: http://forum.xda-developers.com/showthread.php?t=349900&page=9
And now I have a brand new WM 6.5 in my old Prophet!!!!!
Thank you very much!
Nice to see you get your prophet back to life. I still use wm6.1. Because it is said wpa2 does not work with wm6.5. I haven't try wpa2, yet.
Best wishes.
keenblade said:
Nice to see you get your prophet back to life. I still use wm6.1. Because it is said wpa2 does not work with wm6.5. I haven't try wpa2, yet.
Best wishes.
Click to expand...
Click to collapse
That's a good question... as i live in a non populated wifi area, i use just WPA, and it's fine. I must try WPA2, to check that.
and btw, 6.5 rom from babak00000 is just great. Love it.
phone have spl-1.16(was in phone,i don't make hardspl) but when i try write an cooked rom phone stop at 75% and now start in bootloader with power on+camera buton, with power on buton phone start in white screen and one vibration.
i try something with mtty but i don't understand very goog the procedure,i need a memory card insert in phone or without memory card?
when i start mtty and write first comand:
Cmd>password BsaD5SeoA
Pass.
HTCST ÚÈÒHTCE
Cmd>
i don't know what do now
can help me somebody?
thanks
nobody can help me?
iugo said:
nobody can help me?
Click to expand...
Click to collapse
I can try, can you tell me what is written in your bootlader and stop using mtty.
Regards,
in left screen writte:
NIKI100
SPL-1.16.0000
CPLD-4
and in down screen write SERIAL without cable in phone and when i insert cable in phone write USB
iugo said:
in left screen writte:
NIKI100
SPL-1.16.0000
CPLD-4
and in down screen write SERIAL without cable in phone and when i insert cable in phone write USB
Click to expand...
Click to collapse
Thanks, just download This rom after download just connect you're phone to your computer, make sure your phone is in bootloader and run the exe from the download this will flash the original rom, if everything is ok, you will have the original wm 6.1 rom after that you need to Hardspl your phone, just read this Thread.
Just keep me informed if the original rom can not be flashed.
Succes buddy
dont'n work ,stop at 1% after that phone restart in white screen. i attached file with error.
In which language was your original rom ?
before was in italian language
iugo said:
before was in italian language
Click to expand...
Click to collapse
Here is the link for Italian, try to do the same as I mentioned before, just make sure active sync or wmdc is turned off.
Greetz,
thanks man,with that rom phone work, now can instal hardspl 1.22? is ok that hardspl?
iugo said:
thanks man,with that rom phone work, now can instal hardspl 1.22? is ok that hardspl?
Click to expand...
Click to collapse
Yep buddy, that's ok, now you can do the Hardspl as I mentioned before, just read carefull.
Succes,
now work with new rom cooked, i see in phone gps antena,have integrated gps antena? wi-fi suport?
iugo said:
now work with new rom cooked, i see in phone gps antena,have integrated gps antena? wi-fi suport?
Click to expand...
Click to collapse
Perfect it worked for you, enjoy your cooked rom, and sorry no wifi, the gps is for communication with an external gps receiver.
Greetz,
ok, thanks for your help.