Updated yesterday to j15 and am unable to get root. Want to go back to j14 I have the file to flash thru Odin but I want to be sure that I can just flash over j15 back to j14 without having to go back to jvd original stock rom. Afraid of bricking the phone. Any and all info and advice is much appreciated.
Related
So I found a DL09 from here http://adrynalyne.us/files/stuff/ which i plan to use Odin to flash, how do i get the stock recovery back and do i need to download anything else from this page thx. http://forum.xda-developers.com/showpost.php?p=13081158&postcount=1 I Think im on the right Track Thx. Trying to unroot and go back to eclair and get my stock recovery back, I used super-one click to root, I did notice that it has an unroot option too. should I unroot first or push the Tar
file through Odin then unroot.
I rooted my phone a few months ago and have been having uses and want to go back to stock. How do I do that? I have been trying to research it but having difficulty. please help.
http://forum.xda-developers.com/showthread.php?t=782204
i tried that link and half the link there dont work so i can download anything. please help.
If you want to go back to stock...click the link: http://forum.xda-developers.com/showthread.php?t=1044474 use the DL09 download in Odin and make sure you put that in the PDA part.
That will take you back to stock. If you want to go further with it...you can always upgrade the phone via Verizon...I have used DL09 to take me back to stock and then I used the EA28 update as well (which you can use also) then update from the EA28 via Verizon. It works everytime.
If that don't work...try it again but add the PIT file (just search for atlas.pit) if you can't find it let me know and I'll link to it.
Or you can look at the sticky at the top of this forum. Here's the link in case you're on mobile. http://forum.xda-developers.com/showthread.php?t=1053567
Basically, you Odin to some version of stock. DL09 and DI01 are the most common. Once there, just use OTA to bring you up to current.
This thread http://forum.xda-developers.com/showthread.php?t=908451 has links to both Odin and DL09 and instructions on how to use them.
Once you've booted into DL09, press the menu button, then choose Settings, then About Phone, then System Updates, then Check New. Apply any updates VZW offers and then check for more. Keep doing that until there aren't any left.
Wait, you say you rooted your phone. Did you just root it or did you install a ROM? If all you did is root your phone, then you're already on stock. In that case you just need to unroot, which is a much simpler process.
Sorry it took me so long to get back to ya, I installed a rom to root my phone. I went all the way back to DL09, then I applied the EA28 update from Adryn thread, then from there I just kept updating through Verizon until there was nothing left...then I put Clockwork 3.x.x on it, then I installed UKB 2.0 and it rooted automatically.
Hope that helps you. You will only make it to the ED04 update, then from there if you want it stock just leave it be, or install UKB 2.0 w/either pbj kernal or otb.
drnihili said:
Wait, you say you rooted your phone. Did you just root it or did you install a ROM? If all you did is root your phone, then you're already on stock. In that case you just need to unroot, which is a much simpler process.
Click to expand...
Click to collapse
I think we have a miscommunication. I was speaking to the OP, wherever he may be.
Hey guys, I have found most of the info I need, but am still left with a few questions after going through the forums. Maybe I am getting old, but I don't want to take it apart if I can't put it back together, so to speak.
What I want to do, is root my Rogers Galaxy Note without tripping the flash counter, which I learned is to:
Use Odin to flash CWR, and then reboot and install superuser from sd card. No problems so far, that seems simple. The problem I have is with restoring it to full stock. If I perform the above mentioned steps, do I need to flash a custom image? How would I remove CWM and superuser? Would I need to flash back to my stock ROM, and then my stock bootloader? Also, how do make a backup of my Rogers stock ROM/kernel? I read that the existing one has a Telus splash screen.
I found this thread, but the member implies to use titanium backup....wouldn't that back up a rooted ROM?
And this one says you can't make image unless you are rooted. How would I be able to go back to full stock?
I've searched and havent found anything on how to unroot, relock and put the phone back to factory. Ive found how to do it with the old build but not on VRALL4. So how do i do this, wheres the files needed??
I havent looked at going back to stock honestly, but if it truly is a revert, once its reverted you should be prompted for the L4 update via OTA, hope that helps
Ok, so yesterday my phone was unable to be rooted and unlocked for some unknown reasons. So, stupidly, I flashed the back to bone stock restore file realizing that it was a custom rom file and soft bricked my device. Luckily, with the help of google, I used root66 in which made my device able to boot up back to normal while rooted.
I then took the 2 OTA updates to get to Android 4.1.2 with the build VRAMC3 and now I know for a factho its completely stock according to odin mode. Im ready to unlock this device and get roms up.
Although, Im still scared at when I soft bricked my device. Im wondering if there is any sort of restore file that is compatible for VRAMC3 or if I can use root66 or a downgradeable pda file if I were to soft brick my device again somehow? If someone can link me to it, that would be appreciated.
Thanks.
http://forum.xda-developers.com/showthread.php?t=2024207.
Read through this has everything u need
Sent from my SCH-I605 using xda premium
Wow, you have now created 3 different threads and posted in 2 different casual threads. Just stick to the most current casual thread and stop the unnecessary multiple threads. Use the current version of casual to unlock your phone. Don't worry, your phone isn't going to blow up from using it
AldenIsRad said:
Ok, so yesterday my phone was unable to be rooted and unlocked for some unknown reasons. So, stupidly, I flashed the back to bone stock restore file realizing that it was a custom rom file and soft bricked my device. Luckily, with the help of google, I used root66 in which made my device able to boot up back to normal while rooted.
I then took the 2 OTA updates to get to Android 4.1.2 with the build VRAMC3 and now I know for a factho its completely stock according to odin mode. Im ready to unlock this device and get roms up.
Although, Im still scared at when I soft bricked my device. Im wondering if there is any sort of restore file that is compatible for VRAMC3 or if I can use root66 or a downgradeable pda file if I were to soft brick my device again somehow? If someone can link me to it, that would be appreciated. Thanks.
Click to expand...
Click to collapse
In this case I would only use the alternate restore to return to stock if you have to. Then you can accept updates or not.
Ridin' a Note 2 blast