[Q] Help!! I think I've bricked it while doing odin - Vibrant Q&A, Help & Troubleshooting

GUys help plz. I dont wanna have a bricked phone
I was trying to get off my JI2 and get JI4. Loaded the pit file and tar file on odin. then it got stuck at zimage for like 5-6 mins. So closed odin then started, but it was not registering on com port. So i held the power button for 10 sec and it tried to restart and only showing a mobile sign -- ! -- comp logo. what do i do. plz help.
EDIT: and I cant get into any mode - no download/uplaod and no com port is coming to odin.
EDIT2: If I remove the battery and then plug in the cable. the same symbol comes and even if i put the battery in then put the cable. that mobile--!--comp log comes. Cant see the green battery charging thing

Related

[Q] Dead Vibrant after flashing re-partition and pit in odin

Hey I was hoping you guys could help me....
I had a corrupt mbr, so I put my phone in download mode, opened odin, ticked repartition, and loaded the pit file.
I flashed, and everything succeeded.
I pulled the battery to go back to download mode, and flash the rest of the rom, and now the phone is DEAD... like dead. Black screen. No boot screen. Nothing
I have tried vol down and battery in, vol up + down and power, basically every combination I can think of.
Any ideas?
Fixed:
Battery out for 5 mins, different usb port and try again. Back in download mode....

[Q] Galaxy I9100 bricked - Request help

Hi Everyone,
Need help with my I9100 which doesn't boot. I got this phone yesterday and was using it fine. Today i installed Kies and it prompted to upgrade firmware. I researched and found that it had improvements in battery life and decided to go for it. It downloaded the firmware and everything went fine until it prompted saying firmware upgrade failed and asked me to do firmware emergency recovery.
I googled to see more info regarding this error and couldnt get much information. Decided to go ahead with recovery as instructed. Again i got error " Firmware emergency recovery stopped due to GT-I9199 error". If the problem persistes please contact samsung service center.
Please suggest if this is recoverable error and any links to proceed and have a working phone.
Currently when i power on, i get a logo of phone connected to PC with yellow bang in middle. Any pointers much appreciated....
Thanks.
Don't worry, I think you can fix this yourself using ODIN. I mean, flash a custom rom through Download mode. (Turn the phone off, hold Volume Down + Home + Power for 4 seconds)
In this mode you can flash any kind of rom without doing your phone any harm. Just go to the Rom Development forum and choose your rom. I suggest Lightning Rom, because it uses ODIN, and has a very well-explained tutorial.
You can also flash a stock rom, you can get it from the Stock Rom thread, and flash that through ODIN.
Or get it fixed by Samsung and wait two weeks. (where they use exactly the same program, ODIN, to reflash the stock rom)
Look here
And here
And finally here
If all that doesn't work, take it back to samsung.
Also, KIES is a PoS, use Odin in future
Yep, KIES may look all official and reliable, but it actually seems to brick some SGS2's.
Thanks for the info's. Will try them and update soon.
No luck. I tried multiple times to update ROM using ODIN in download mode. Everytime it says NAND write operation failed and comes out. I am searching to see if any other option left before i take it back to samsung
Don't forget to try it with a different computer. Sometimes it's not the phone, it's the PC or the USB port.
Also, you can try flashing with Heimdall instead of Odin.
First of all;
Yellow triangle means you are running custom kernel/rom.
Press home+volume down and then power, to get into download mode , on your phone. If that works, take battery out, to stop it.
Go to:
Samfirmware.com
Download firmware from there. It is a rar file, I think. Open rar file to see what is in. 5 files? The biggest file has all of the other files in it.
Install via Odin. Select pda in Odin and select the biggest file from the rar.
Put your phone into download mode, connect usb and run Odin.
Adrian.
SGS2 I9100
Lite'nin rom 3.2
Make sure that all kies processes are closed or odin will fail.
Sent from my GT-I9100 using XDA Premium App
Keis? Hmm.
Adrian.
SGS2 I9100
Lite'nin rom 3.2
it gets worse...
my brother let the battery fall out of his S 2 while flashing with odin, now it wont power on in any mode, the PC wont recognise it at all, when i plug in the charger the phone gets hot, but does nothing.... whats the recovery method? or is it dead well and truly...
mightygoose said:
my brother let the battery fall out of his S 2 while flashing with odin, now it wont power on in any mode, the PC wont recognise it at all, when i plug in the charger the phone gets hot, but does nothing.... whats the recovery method? or is it dead well and truly...
Click to expand...
Click to collapse
You can buy a usb jig, specially designed to put you phone into download mode. Search for it on ebay. Take the battery out, plug in usb jig, replace battery and it should boot into download mode. If it does not, then the phone is dead.
Sent from my GT-I9100 using xda premium

[Q] SGS i9000 wont turn on at all

Hi Developers !
i have a SGS i9000 i tried ti upgrade it to 2.3.6 but unfortunately i guess i've chosen the wrong pit file, here is what happened exactly my phone was on download mode i started the flash with odin and then and then it got stuck on download mode, and in odin i had no com3 (in yallow) so i waited a few minutes and i unpluged the phone usb, i tried to power it on nothing happens just black no download mode no recovery mode just the reflection of my face. i tried to take off the battry and leave the phone and power it back ok NOTHING, i tried a new original battry NOTHING, the only thing i didn't try is the JIG.
i worked so hard to buy that phone and now im back to my Nokia 3310
i really need ur help developers is there anything else that i can do ?
Thank You
issam7332 said:
Hi Developers !
i have a SGS i9000 i tried ti upgrade it to 2.3.6 but unfortunately i guess i've chosen the wrong pit file, here is what happened exactly my phone was on download mode i started the flash with odin and then and then it got stuck on download mode, and in odin i had no com3 (in yallow) so i waited a few minutes and i unpluged the phone usb, i tried to power it on nothing happens just black no download mode no recovery mode just the reflection of my face. i tried to take off the battry and leave the phone and power it back ok NOTHING, i tried a new original battry NOTHING, the only thing i didn't try is the JIG.
i worked so hard to buy that phone and now im back to my Nokia 3310
i really need ur help developers is there anything else that i can do ?
Thank You
Click to expand...
Click to collapse
Hello, did you get what error in Odin?
I think you must try USB Jig!

Odin back to stock failed...cant get to download mode!!!

I was in download mode and attempted to odin back to stock and it failed. see screenshot attached. Now my phone is stuck on the little cell phone and computer symbol connected by a triangle in between. its the same as shown in this video.. .Now I cant get it to download mode...
Any help would be appreciated... .
phone is stuck at the symbol shown in the start of this video
http://www.youtube.com/watch?v=9nMCBbdAcHU
Had this same problem recently. What I did was try to put it in download mode again by holding the up and down volume keys and plugging in the cable, it would show up as the icon as you mentioned but the computer would recognize it to be in download mode. I would then use odin like normal. Are you sure you are using the correct .pit and .pda file just in case?
wkenworthy10 said:
Had this same problem recently. What I did was try to put it in download mode again by holding the up and down volume keys and plugging in the cable, it would show up as the icon as you mentioned but the computer would recognize it to be in download mode. I would then use odin like normal. Are you sure you are using the correct .pit and .pda file just in case?
Click to expand...
Click to collapse
So I used another computer this time....still had that computer and cell phone icons on the screen...but as you said ...i just opened AIO tool and used odin to flash it to stock..it worked this time...and once done... i checked the phone which was working and quickly rooted and installed a FROYO custom rom.
thanks again
stuck at samsung vibrant screen after flashing with odin
i have a problem, can anyone help me plss. my phone got stuck at samsung vibrant screen after flashing it back to stock using odin. i keep repeating the flashing many times, it was successful i think because it says pass so i keep it still and not removing the usb plug until my phone turns on but then my phone stuck at samsung vibrant screen ..huhu what to do? plss help me guyss
jonna19 said:
i have a problem, can anyone help me plss. my phone got stuck at samsung vibrant screen after flashing it back to stock using odin. i keep repeating the flashing many times, it was successful i think because it says pass so i keep it still and not removing the usb plug until my phone turns on but then my phone stuck at samsung vibrant screen ..huhu what to do? plss help me guyss
Click to expand...
Click to collapse
Use this to go to download mode and flash with Odin again.
http://forum.xda-developers.com/showthread.php?p=48458994
Sent from my SGH-T959 using xda app-developers app

[Q] (soft?) bricked my Tmobile vibrant

So here's the rundown:
I bought a tmobile vibrant and tried to root it to install cyanogen mod. I tried to install the update.zip package to root it but it kept failing.
It turns out it was because it had that 3e recovery that won't install non-signed zips.
I tried this http://forum.xda-developers.com/showthread.php?t=833423
Phone froze for 5 minutes so I unplugged it and pulled battery. Guess what? Wouldn't boot after that.
I can still get into download mode by holding down volume up+down and putting in the battery while it's connected to the computer.
Before I had the orange error screen with the connect phone to PC symbol.
I Odin'd with http://forum.xda-developers.com/showthread.php?t=1047087
Now the phone is in a bootloop going from the battery symbol with the buffer to vibrant screen.
I've tried all the different ways and orders of connecting it to Odin and I can't get it to work. It'll say pass every time but it gets stuck in a bootloop.
I'm all out of ideas and I don't understand where it's going wrong. If anyone could please help me I would greatly appreciate it.
Here's a screenshot of my odin https://i.imgur.com/J9U3F6U.png

Categories

Resources