Related
I see WM2k5 1.60c at Buzzdev.net but I can't upgrade because I can't create ".nbf" file. Please help me
Hi, Can you post the link on buzznet as i can't find it??
cheers
Buzz removed the upload. He will post it later on :roll:
Victor
It see it is available on the site!
The dump of 1.60c on Buzz's site is only a dump of files from his device that were used for his testing...
The installer package will be released later on this week / early next week, please be patient...
it'll be worth the wait !
I confirmed it already reposted by buzz. You can download it now. I already upgrade it to 1.60cWWE, but I didn't see any different.
Quite a bit speedier, can't see much else different tho.
Thanks for your time and effort Buzz! We appreciate it.
Hi Buzz,
Thanks Wooooo Hooooo!!!
Everything works fine!!! The speed increase is wonderful!
I have no words to express my gratitude!! You are da man.
I think a lot of people have been spoilt and miss the big picture! Buzz you have done a great job. Just a small comparison to prove this:
Still Broken:
- The buttons (I would love for these to work, its no biggie)
- MMS (Which I have no need for realy)
Fixed huge problems by using WM2005 vs WM2003:
- Bluetooth works like a dream
- Headset reliably works
- Car kit reliably works
- BT GPS reliably works
- Persistant Memory!!!!
- No lockups
- Faster!!!!
- Battery lasts at least twice as long
- We now have WMP 10
- There are several other benefits that the os brings
Respect to the man with the plan.
Regards,
Duan
hi guys
i have dowloaded the update but how do u install it, and do rekkon it will fix the tomtom5 reseting problem
Cheers
Neel
HI all,
intalled 96c but now can't get the extra 32mb storage to appear, unhide then unlock then run Hima_DOC_Tool_1.0.exe, reboot when asked but this cause hard reset and i have no 32nb storage???
can't install voice command, says i have not go enough room?????
currently have
storage 30.53 and program 120.32
any ideas.???????
Also tomtom won't install. Installation just crashes right after agreeing to the licence AAAAHHH??????
I followed Buzz's instructions so can't see what i have done wrong???
Griffy wiffy- any chance you can tell me how u installed it as i dont understand the instructions that come with it
cheers
Neel
Hi Neel, not sure what you are asking. uninstalled what??
Hmmm... I can only see forum on Buzzdev. Where did main page go?
What about the STK (Sim Tool Kit)?
Is it working as well?
I've tried 1.60h.
I worked flawlessly.
However, I have to go back to WM2003SE coz I really need and use this STK feature everyday.
Can someone tell me where can I find the cure for STK to be used in WM5.0, please?
Thanks.
I have a problem downloading WM 5 v 1.60C. Can somebody upload the ROM please!!!! :roll:
tukmol said:
I have a problem downloading WM 5 v 1.60C. Can somebody upload the ROM please!!!! :roll:
Click to expand...
Click to collapse
try this :
http://twosx.net/ppc/WM2k5_1.60c.00WWE_XDA2_HIMALAYA.rar
:wink: :wink:
WM 2005 v1.60C !!
hi all,
after upgrade to wm 2k5 v. 1.60C
y i cant install program to 128mb storage ??
only can install to 31mb storage
thz for ur ansss
hi
after upgrading to 1.60c.00WWE, has anyone lost there Ram disk thing
im totally confused when it comes to Ramdisk, what on earth is it? does it make the memory available on WM5 more? more than the 60 mb we get for storage??
Sorry i know it's a stupid noob question but i really wanted to know
Cheers
Ash
I've been trying now for more then a week and I fixed the sms and bluetooth bugs from my multi touch... but since the new method of flashing roms I can't get any of my cooked roms to sync with activesync.... so if I can't get any help or directions soon I'll drop prophet totaly
I have a Kaiser and I'm giving my girlfriend a Touch Dual for christmas so I have no need for more Prophet roms...
so it's a cry for help or my roms are history
same problem to me.cook with the new nb,all provxml files are not executed when hard reset,so the security policy is strict and cannot install any cabs or activesync
by the way, thank you for ur great roms gullum
oh no gullum! what are u gonna do with your 2 prophets? can i have them? hehehehe
really appreciate all your work for the prophet man, u really can cook....
If your having a raffle, can I have your prophet? I'll pay for resonable shipping!
Activesync
Hey man, it can't be related to the new upgrade method , am using Crystal 5 upgraded with the new method and i just got my Prophet synched.
am using Outlook 2003, Activesync 4.5, XP with the latest patchs and i have only Arabizer installed in my PDA nothing else.
Excuse me but i dont understand !?
Do Gullum mean that with new hardspl he can't cook anymore because of activesync ?
ric69 said:
Excuse me but i dont understand !?
Do Gullum mean that with new hardspl he can't cook anymore because of activesync ?
Click to expand...
Click to collapse
No what I mean is that my roms don't work and I don't know why
If it's not a reg problem or anything in the ROM , it's not a XIP problem ?
xvx45 said:
If it's not a reg problem or anything in the ROM , it's not a XIP problem ?
Click to expand...
Click to collapse
my guess is that is xip problem I will try using my old os.nb but then it will be regoniced as a wizard but if it works I know where the problem is and can maybe fix it
There are some cooks that succeeded, so I'm wondering why they can't help you out. I do understand however that now you don't use a Prophet yourself anymore, it is not so much fun anymore to cook for this device. People request, demand sometmes, but you don't benefit yourself.
But, on the other hand, it is no shame to release your ROM the traditional way, is it? You will make a lot of people happy with the fixed multi-language version of your latest receipt.
rondol1 said:
You will make a lot of people happy with the fixed multi-language version of your latest receipt.
Click to expand...
Click to collapse
+1 and I can help you in French to finish what is not translated, I've created some ROM in French, I've all elements (not all like soft how are not original or compressed) I'm with you !
It is the xip or the new os.nb that are causing my problems with active sync..
so I can now make roms that working but will be reconiced as wizard by some apps but this means I can continu working on the roms... and hopefully I'll figure out how to remove the mini os to get the extra storage
gullum said:
It is the xip or the new os.nb that are causing my problems with active sync..
so I can now make roms that working but will be reconiced as wizard by some apps but this means I can continu working on the roms... and hopefully I'll figure out how to remove the mini os to get the extra storage
Click to expand...
Click to collapse
Gullum.. Maybe you can ask hma4 or cloudyfa for that.. They've made it.. Maybe they can help you..
gullum said:
No what I mean is that my roms don't work and I don't know why
Click to expand...
Click to collapse
Gullum,
Do you experience the same activesync problem ?
If not tried, can you try ?
Did anyone try the english version, and did that work ?
Then it could be something translated too much ?
Hi Gullun!
I am a novice guy in this rom's world, I can't help you in your problem, but me ang other prophet guys are happy with your last rom's especially with multi language, and this is not with some more Mbs in the devices that I change to another rom. I flash my prophet because the language rom and the less bugs.
So, the flashmaker's run in two ways. One for the last and more bug software in other and usefull, stable and minor bugs. I'm shure that last roms make happy more people.
For last I think the way for the perfect rom is to converge the knowlage of last day out roms.
Thanks for your time...
so in short what is the deal: indentification as pm300 screws active sync up, and wizzard identifications works with active sync?
screw identification as pm300 then, i can do without some programs... like camera plus...
and i can do everything with a english language...
so screw the languages aswell as long as there are more stable, faster and useable roms i'm happy...
I have done a cab installer for Bluetooth SAP Profile, for people that use it!
Thkx a lot man. going to try it...
thnaks man
bikertibi said:
I have done a cab installer for Bluetooth SAP Profile, for people that use it!
Click to expand...
Click to collapse
I have tried to download the Bluetooth_SAP_profile.CAB but i get an error message saying that i do not have not logged in yet i actually am logged in ...i can however download the other bluetooth protocols you have posted. Kindly assist.
Good job Man.
@bikertibi: I´ve seen you have the XDA Neo also. I have this mobile too, with the OS WM 5.0. Does the program works with this OS?
Limbacher said:
@bikertibi: I´ve seen you have the XDA Neo also. I have this mobile too, with the OS WM 5.0. Does the program works with this OS?
Click to expand...
Click to collapse
I don't tested on WM 5.0 but I think it work.
Hi,
it works! Great,thank you for your help!
regards
Jürgen
Hi,
I will use ith with my Xperia X1 Sonyerricsson, but it doen't work.
Have you any idears? I must use it in my mercedes.
thanks.
hi
i have a scirocco and the radio ( RNS510 ) have the rSAP blutooh protocol .
do you know if this upgrade will make my htc p3600 work with the radio ???
thank you very mutch .
angelo from portugal .
babaroots said:
i have a scirocco and the radio ( RNS510 ) have the rSAP blutooh protocol .
do you know if this upgrade will make my htc p3600 work with the radio ???
thank you very mutch .
angelo from portugal .
Click to expand...
Click to collapse
I don't know angelo, but you can try and told as about your experience..
hi
hello .
VW in the manual says that only Nokias and 3 siemes work in that radio .
Well for all the people out ther that have a scirocco and dont want to change cell phone ...
HtC remote acess card works fine with the radio .
Thank you .
angelo canelas
Hi!
I needed this for my Omnia to work with VW Premium handsfree bluetooth kit. I have boiled Omnia with Manila ROM. WORKS PERFECTLY!!! After long last i got it! Many thxxxx!!!!!
Next thing: is it possible to modify it to work on Samsung SGH-U600, which is PC connectable via Samsung PC Studio? My wife'd like to connect as well...
Take care!
J.
Hello,
how can I install this tool on my blackberry? I cannot install a .zip file.
Hope that somebody can help.
Zweez
bikertibi said:
I don't know angelo, but you can try and told as about your experience..
Click to expand...
Click to collapse
Hi,
I too got a scirocco and I have just tried the .CAB and
it worked!!!!
but one small problem is that u can upload the phone book
i got an X1 and got a cooked ROM from this site (cant remember whose though but it was one with 3 options of cooked rooms ) and before the .cab it was not working and no it is...
if anybody can help regarding importing the phone book, i really appreate the help...
long live xda
Disable popup menus?
Ìs there a way to disable all that upcoming popups while connecting and disconneting through bluetooth?
OldFellow said:
Ìs there a way to disable all that upcoming popups while connecting and disconneting through bluetooth?
Click to expand...
Click to collapse
I don't know any easy way to disable this popups! Can be a solution to make a windows service for checking this popups and close it, but is a programming hard work, and of course you can loose some ram and speed from your device.
Hi, i have been working on this since yesterday and still i haven't got the right ROM for my device. It's HTC P5510 (NEON100) device (16keys).
So far, i have tried different ROMs for NEON and they all don't support 16key keymapping, i have tried several that would stock my keypad input to numerics only, it would only input numbers, tried every cab/hack/tweak that i found and still nothing.
I even tried hex editing some Niki/Nike ROMs to run on my Neon, but still my problem is the keymapping.
So i would really appreciate if someone could point me to a NEON100 ROM that supports 16keys.
Thanks you in advance!
Anyone pls?
da_mayhem said:
Anyone pls?
Click to expand...
Click to collapse
You already told us that you tried every cab, so I'm almost sure you have read this thread but I thought I gonna give it a try and hoping you missed that one.
Also take a look here it could be also interesting for your Neon100.
Succes
Hi, thanks for replying bro.
The 1st link, yes i have tried those. And yes, it doesn't solve my problem.
The 2nd link, yes already read that thread and there is nothing good for me there, only a dumped and rebuilt stock rom of NTT DOCOMO HT110, which is a non-WWE ROM, it's a Japanese ROM.
Still no luck for me, i'm about to download your ROM and give it a shot, if all goes well with your ROM, all the praises to you bro!
Thanks again
@Rataplan - I tried your ROM bro, it would successfully be flashed but i can't boot, not even to the screen alignment screen....
da_mayhem said:
@Rataplan - I tried your ROM bro, it would successfully be flashed but i can't boot, not even to the screen alignment screen....
Click to expand...
Click to collapse
Thanks for the info, I build the kitchen with the dumped rom because I couldn't find an original rom, I will send you an pm if there is any progress from my side, if you are interested ?
Greetz,
Yes bro, no problem, just let me know.
Thanks!
Finally got it right! I flashed a cooked Neon (200) ROM and it was originally for 20keys..
Installed EzInput 1.5 plus Lang Pack = All keys inputs only numbers
Did a Reg edit:
HKEY_LOCAL_MACHINE\Software\Tegic\eT9\IME\CarrierDefaultTextMode = 0 (dword)
..and finally got it right.
Thanks to all and to Rataplan!
Great job buddy, can you give me some more info about the rom you use ?
Greetz,
Hi
it's jony_aa's ROM
Here's the link
CLICK HERE
HI! I have P5510 SIM LOCK from Korean SKTelecom
How can I unlock thise HTC? Where can I download a solution to unlock Touch Dual?
@dimokaktepa - Buy unlock code online...
Flash HardSPL for Neon by Olipro, flash a cooked WWE ROM before you can enter the code.
ESROM is here to make your phone better. Again. Now with Manila.From the creators of other ESROMs, michytheone and michyprima.
Changes upon R1:
Fixed Torch and Reset bug
Fixed manila2d graphic issues
Fixed office bug
Associated reg file to taskmanager
Added MichyTheOne's DialerSwitch
Skinned windows media player(HTC Style)
Screen shots:
Download:
Italian version
French version
English version
Spanish version
Donations:
Finally...
If you played nice with this and want to say thank you, here's a nice way to do it...
We are students, so we will like any gift very much.
Donations
If you donate please don't forget to notice so I can say thank you!
Credits:
A thanks goes to ped_kho which initially developed manila 2d vga skin and which was modified by us.
Enjoy
more information please ^_^
Hi Mick,
would you please give little more information about your work ?
It seem to be very nice but :
everything works ?
is it fast , like win6.5 or little slowly ?
do you save samsung videocall ?
thanks
folletto0403 said:
Hi Mick,
would you please give little more information about your work ?
It seem to be very nice but :
everything works ?
is it fast , like win6.5 or little slowly ?
do you save samsung videocall ?
thanks
Click to expand...
Click to collapse
The rom is fast.
If you want video call enable samsung Dialer.
Manila tabs working: All, except Music.
Hi friend,
I'm a french moderator and many members have problem with the touch sensibility...
HAve you optimised it ?
This rom is based on a 6.5.3 jh2, the best 6.5.3 actuallay, congratulations dudes...
darkyannick said:
Hi friend,
I'm a french moderator and many members have problem with the touch sensibility...
HAve you optimised it ?
This rom is based on a 6.5.3 jh2, the best 6.5.3 actuallay, congratulations dudes...
Click to expand...
Click to collapse
Yes, we have optimized touch sensibility
michytheone said:
Yes, we have optimized touch sensibility
Click to expand...
Click to collapse
not working on B7610 ,,, the screen hangs at samsung logo at startup ...
whats the solution ,,, i like this rom ,..
samnasser said:
not working on B7610 ,,, the screen hangs at samsung logo at startup ...
whats the solution ,,, i like this rom ,..
Click to expand...
Click to collapse
This rom is for i8000.
now is ROM already works the antorh, thank you
very rapid the ROM, you will can do Sense 2.5
Check first post, there's a little update.
thank you!
and for titanium version?
titovramirezb said:
thank you!
and for titanium version?
Click to expand...
Click to collapse
We need some time
Just downloaded 'Manila2DENG.nb0' and want to flash using OCTANS Mini-Downloader v2.1. I don't have an .MST and .CSC file, do I have to use them to flash your rom or can I just leave the field blank?
Hello,
Verry fast rom, but can i ask why the weather in weather tab updates and the one in the home tab does not? and when i want to put programs in the programs tab the resolution is a log smaller and i can only see the programs in a portion of the screen? is there a known bug or somethin? the rest of the rom is awsome, is the only touch interface usable on a I8000 phone because it's fast.
Kind regards,
Daniel
The wather just updated but there is still a problem with the programs, anny clues about that?
Sjuust said:
Just downloaded 'Manila2DENG.nb0' and want to flash using OCTANS Mini-Downloader v2.1. I don't have an .MST and .CSC file, do I have to use them to flash your rom or can I just leave the field blank?
Click to expand...
Click to collapse
Leave MST and CSC field blank
dumitrudan608 said:
The wather just updated but there is still a problem with the programs, anny clues about that?
Click to expand...
Click to collapse
Those are Manila 2d's bugs. We can't fix it.
Hello,
Thank you for your answer, i find that once you have your interface personalized, tf2d work like a speed racer that's perfectly oiled.
But i have a problem, Active Sync cannot connect to the exchange server from my work place. This only happen to my with Energy rom, because the rom did not enforce referential integrity. Your rom does that but it cannot connect.
Do you know about this bug? i really wanted to use this rom on a daily basis. But i cannot use it unless it's synked, because i have a lot of meetings.
Keep up the good work,
Daniel
i really love the android like status screen, do you think you could share a separate cab for that?
Thank you!
in this new updated i cant installing sms htc client same with spb phone suite and spb pocket plus that does freeze the device and only with hardreset it will solution it