Hi all !
Yes my hd2 freezes a LOT when it gets very hot while charging and also when i start it sometimes it vibrates 6 times and freezes without loading the system so if ther' any solution for that ? i installed the last GTX rom and also i did test the latest stock T-mobile rom with the radio 2.14.50.04 nothing changes it's freezing a lot.
Thanks in advance.
two possibilities:
1. one of you battery connectors might be bent (I've seen few threads on this issue here on xda)
2. faulty mainboard (been there) - if you Leo is under warranty, restore it to stock settings and send for repair
in the meantime you might consider using Battclock for battery temperature monitoring, once it gets to "freeze zone" switch your Leo off for a while or - if desperate enough - put it in the refrigirator (5 minutes should be sufficient)
p107r0 said:
two possibilities:
1. one of you battery connectors might be bent (I've seen few threads on this issue here on xda)
2. faulty mainboard (been there) - if you Leo is under warranty, restore it to stock settings and send for repair
in the meantime you might consider using Battclock for battery temperature monitoring, once it gets to "freeze zone" switch your Leo off for a while or - if desperate enough - put it in the refrigirator (5 minutes should be sufficient)
Click to expand...
Click to collapse
Thanks for your reply, i think the problem is coming from the copper pins as you said ( or connectors as you've said ), when i touch them the phone boots good, but it doesn't fix it i must always touch them and wait that the phones boots so, how can i fix thoses pins once and for all ?
Some users here reported freezings due to a bad Radio and ROM combination. Maybe you should downgrade to a different Radio and choose another (stock?) ROM?!
odoss said:
i think the problem is coming from the copper pins (...) when i touch them the phone boots good, but it doesn't fix it i must always touch them and wait that the phones boots so, how can i fix thoses pins once and for all ?
Click to expand...
Click to collapse
you could try to delicately straitghten the pins - I saw a thread on this somewhere here (here meaning xda/HD2 forum)
UP !
I still have those overheat issues i did verify the poins they are ok i did take it to a guy how fixes phones he told me he don't know ( i dont have a warranty ), if there any other solutions PLEASe help me...
Thanks in advance
We've had issues similar with the work HD2and it was resolved by replacing the battery.
How or why this came about was beyond me, but it must have been due to some of the idiots we employ playing about and not showing due care with the phone, so try a different battery, they are cheap enough
johnerz said:
We've had issues similar with the work HD2and it was resolved by replacing the battery.
How or why this came about was beyond me, but it must have been due to some of the idiots we employ playing about and not showing due care with the phone, so try a different battery, they are cheap enough
Click to expand...
Click to collapse
Ok i'll buy a new one and i'll try
between i saw a strange thing on the battery ( the battery is deformed at the top a small part ), the battery costs here more than 20$ so it's not that cheap here, but i'll buy it i hope it will fix the problem.
But tell me after buying your new battery the problem is fixed for good? no more overheating?
Thank you man for your anwser.
UP !
I did buy a new battyr today, no chan ges the problem is always the same....
so i very very sad after my last try, i must say now my hd2 is dead and with no warranty i can say Fu*k lol.
Thanks everyone for your help and i will never buy htc phones !
What actually happen? I would keep trying and if it won't turn on anymore. I would still try to claim warranty by htc. Maybe they are not gonna repare it to difficult. So they can't check for hspl. And then they maybe send you a new phone. As far as I know it doesn't cost your anything when they detect hspl. They just don't repair it.
Related
Hi there,
I have again troubles with my XDA-Display.
After Loading my XDA´the Display has many Strips in all Colors and will not return to normal-mode.
HW-Reset, SW-Reset, New Flashing brought no result.
After opening the equipment I had briefly again a normal picture, but since that have I again only strips on the XDA.
Synchronise is okay, Backup I can do, but I have still no CE-Screen, only stripes. it would be beautifully if someone the problem knows and me thereby help could.
At The begin of Juny I had the same problem, but after switching on and of (ca. 100 Retries ) the XDA had the normal scren. But now the Xda will not go back to ormal screen
Best regards
Verena
): monitor problams
Hey,
im trully sorry for your XDA, i know how is it to lose a friend...
your problem is probably related to the very delicate contacts between the glass and the last display controller.
to verify that, open the equipment and hold your display GENTLY!while its on.
with two fingers along the edge, both horizontaly and vertically, and add a little pressure along the edges BE CAREFUL! you will see some changes on the display, if some of the strips will disapear, you will probably have to replace the display.
if there is no change while prforming the above, disconnect the big brown connector, clean it with alcohol and connect it again. BE CAREFUL while you handle the plastic cover. and generally with the motherboard.
if you want, i can help you, contact me:
[email protected]
i holp you will use it again
good luck
sonic.
now -> 2 hours later, I still sit by my XDA and wait for a normal CE- Picture on my Display.
Has somebody a tip or a solution to ix this problem ??
Its urgent !!!! -> I need this PocketPC for my work and training for MCSE
br
Verena
:x
Obermaus said:
At The begin of Juny I had the same problem, but after switching on and of (ca. 100 Retries ) the XDA had the normal scren. But now the Xda will not go back to normal screen
Click to expand...
Click to collapse
I'd say this is an intermittent hardware problem. You could check whether the keyboard cables are fitted well to the motherboard, and otherwise the unit needs a new display, which is expensive.
Don't worry about breaking any warranty seals: nobody in their right mind would argue with an MSCE, even when he's merely in training.
Thanks Sonic for your reply, I try to clean it....I think the problem happens, if the PDA in the loading station for more as 3 hrs. it seems to overload the accu..
br
Verena
Hi there,
perhaps has somebody another idea ?
Verena
PS: i` ve cleanad all parts, and the Display i think is okay, but Software or Accu ??? The Stripse stay on :roll:
I dont know if this will work with you But it did with mine.
Hi!
Try to reinstall your OS via an SD Card. I doubt you installed a new OS and had your installation interupted. This happend with mine and I lost my PDA for 2 weeks until i configured how in the world to restore the OS via SD Card.
All of the informations gathered here are all experimental to me and its scary sometimes to venture in solving your problems with thoughts that you might break your device by doing it wrong.
Take things as a learning experience including the risks involved. I'm sure you'll learn alot just like what I did. I solved my problems by looking at others' problems giving me ideas on the HOWs. This is my first time to participate by writing you. I had a similar problem seeing lines like i did with my PDA that wont even start...just the line displays. This should work for you.
See ya....
So a friend of mine could possibly be selling me his x10 for a ridiculously low price, which I found out from another friend to be because of (possible) overheating issues because he tried overclocking the phone; and after trying to bring it back down to the original speed it still is overheating.
Before I get into something that would completely waste my money, is there a way for me to be able to fix it so it works normally or would this be something that I should completely avoid all together. Basically, I'd like for some tutorials provided that can help me rectify this problem.
Thanks for any help provided.
its not possible to over clock the phone right now... so idk what your friend did. Also what kind of overheating issue is it? Getting really hot? or shutting down a lot?
Well thats was how I understood it as. And from the sounds of things it seems like it is just getting overly hot.
jonnyg1097 said:
Well thats was how I understood it as. And from the sounds of things it seems like it is just getting overly hot.
Click to expand...
Click to collapse
It's possible it's just his battery that's shorted. Maybe another battery? That or the GPS chip runs constantly... I know mine heats up when the GPS runs at full. I also say try and flash the firmware back to a regular ROM (Without mods).
Those are my ideas. Otherwise toss it in the freezer! haha
Sounds like new need some Arctic Silver, Heat Sink and a 200CFM SUNON!
Its a hardware fault. It will eventualy start rebooting, and after that it wil start shutting itself down or locking... i think its something with the pmu but not sure. If it has warranty send it to repair...
jonnyg1097 said:
So a friend of mine could possibly be selling me his x10 for a ridiculously low price, which I found out from another friend to be because of (possible) overheating issues because he tried overclocking the phone; and after trying to bring it back down to the original speed it still is overheating.
Before I get into something that would completely waste my money, is there a way for me to be able to fix it so it works normally or would this be something that I should completely avoid all together. Basically, I'd like for some tutorials provided that can help me rectify this problem.
Thanks for any help provided.
Click to expand...
Click to collapse
nice friend!!! lol
biktor_gj said:
Its a hardware fault. It will eventualy start rebooting, and after that it wil start shutting itself down or locking... i think its something with the pmu but not sure. If it has warranty send it to repair...
Click to expand...
Click to collapse
My Xperia started overheating and now its having very frequent restart cycles from several days. Is it a hardware fault in the Xperia X10?
At least on my first x10, it started like that, then only went worse. the first sign was when doing generous amount of traffic (heavy browsing, downloading some apps at the same time...) it started rebooting. After that it started doing it whenever it got network, during calls... even when reflashing.
So I would flash back to stock, then take it a day for a ride with.a backup phone. If it reboots even once, send it to repair...
I'm also experiencing the frequent reboot problem. It seems the best solution I've found was to send it back to SE for repair/replacement. That solution is unacceptable for me, as I spent $600+ for an imported x10a when it first was released, and as such, SE has deemed my phone "gray market" and I would need to pay for repairs.
I love my x10, but $800 for a phone that's still severely outdated and lacking some high-end functions is just not worth it.
I am convinced that the problem stems from a faulty temperature sensor in the motherboard. My phone is definitely not hot to touch, and it seems that just placing it in front of a fan alleviates the rebooting problem.
Do any devs know of a way to disable the temperature sensor either through an app or via adb?
Its doesnt look like bad sensor, but a bad ic on the board or a bad solder point.
For me it ended up getting stucked even on the bootloader, where everything is 'out of order'. The only way i got to reflash it was using my car's air conditioner at 16 degrees... didnt have warranty either, so the board now resides half dead on my desk...
Ouch. Sad to hear. Did you order a new mb or a brand new phone? If just the mb, mind sharing where you got it from and the price?
I bought a second x10 and left the other one for testing and parts... though this x10 is starting to get a little warm too, lets hope this doesnt die too...
The display ous on max, turn it down...that's why it's hot as hell
Sent from my X10a using XDA App
lol you did just like me i bought another X10 today check my (motherboard problem thread) guys pls if there anything to avoid this problem tell me from now , i have 2 X10 now
The problem:-
1- restarts many times.
2-randomly shut down when i open Wi-Fi or apps or use it for more than 5 mins.
3-can't turn on sometimes and can't turn on using charger , only pc companion.
4-Burning Smell.
i know there's another thread talks about this problem but pleaese it's a serious common problem , i bought the mobile yesterday and i can't replace it , i've seen this post in SE forms : -
............................................................................................................
It cost about more than 2 hours,and i sat near the engineer looked at what he was doing,everything.
1. He said before this one,he has fix 4 x10 with the same problem.He checked my phone and told me he must take the phone to parts,i agreeed.
2.The restart problem is neither a software problem nor briefly hardware problem.The reason most likely is welding procedure .Between X10's CPU and the chassis on the M/B there is no bayonet(i'm not sure it's the right word), so the closeness of them only depends on colophony(another word i use google to translate it) and solder (the third one).He said when x10 is koncked or bumped,fissure or something others may appear,and when CPU runs at a high level,the ammeter shows a number above 200mA,you can think its fever.Because goods expand with heat and contract with cold，here comes the flexibility.It may influence the contact between cpu and chassis.So the restart happens. He get the CPU off M/B,clear and rebuilt solder on them very carefully,and packed everything back.THIS COST TWO HOURS.
3.When parts became back to a phone,I push sim card,sd card back,truned it on,it booted successed.Then i run the Backup and Restore app,no problem.Before repaired erverytime i run it, the phone restarted.view www web use the brower by 3G, opened servel windows,no problem;Played Asphalt 5 for 10 mins,the phone became hot,still no problem.So i paid for it and left.That cost fuxk 500RMB,nearly 100$!!!!!!!!!!
4.When the engineer was soleing it, i talked to him,he said G7 also has a lot of problem,G7 use the smae CPU as x10,it also may restart.
............................................................................................................
anyone tried this?????
please if anyone has fixed this problem (i know i can change the motherboard but it cost alot , I need Electric solve) . and it's not a software problem at all and n ot in the battry .
this is the best forms for PPC's so i don't have to post this in every site so better sign up and replay please maybe someone can help...
64 views and no answer -,-
and btw the phone works well when it's cold but it shut down when it's worm or using Wi-Fi or Calling . so to re-operate it you need to put it in air conditioner then but the battery back and switch on
So far no problem.
By the way the phone had no warranty?
yea , i bought it used and it looks that someone bought it from china and sell it here so the warranty doesn't cover my country.
thanx for telling me that x10 doesn't have another factory problems.
i send it today to one of those small repair places , they said the IC's are burned because of short circuit or something like that so we'll see what will happen tomorrow.
it cost me around 100$ but it doesn't matter as long it work.
sorry to say it but you buy cheap, you get cheap. might have to shell out for some repair work or ditch it and buy a new one. hard luck man.
hemo1001 said:
The problem:-
1- restarts many times.
2-randomly shut down when i open Wi-Fi or apps or use it for more than 5 mins.
3-can't turn on sometimes and can't turn on using charger , only pc companion.
4-Burning Smell.
i know there's another thread talks about this problem but pleaese it's a serious common problem , i bought the mobile yesterday and i can't replace it , i've seen this post in SE forms : -
............................................................................................................
It cost about more than 2 hours,and i sat near the engineer looked at what he was doing,everything.
1. He said before this one,he has fix 4 x10 with the same problem.He checked my phone and told me he must take the phone to parts,i agreeed.
2.The restart problem is neither a software problem nor briefly hardware problem.The reason most likely is welding procedure .Between X10's CPU and the chassis on the M/B there is no bayonet(i'm not sure it's the right word), so the closeness of them only depends on colophony(another word i use google to translate it) and solder (the third one).He said when x10 is koncked or bumped,fissure or something others may appear,and when CPU runs at a high level,the ammeter shows a number above 200mA,you can think its fever.Because goods expand with heat and contract with cold,here comes the flexibility.It may influence the contact between cpu and chassis.So the restart happens. He get the CPU off M/B,clear and rebuilt solder on them very carefully,and packed everything back.THIS COST TWO HOURS.
3.When parts became back to a phone,I push sim card,sd card back,truned it on,it booted successed.Then i run the Backup and Restore app,no problem.Before repaired erverytime i run it, the phone restarted.view www web use the brower by 3G, opened servel windows,no problem;Played Asphalt 5 for 10 mins,the phone became hot,still no problem.So i paid for it and left.That cost fuxk 500RMB,nearly 100$!!!!!!!!!!
4.When the engineer was soleing it, i talked to him,he said G7 also has a lot of problem,G7 use the smae CPU as x10,it also may restart.
............................................................................................................
anyone tried this?????
please if anyone has fixed this problem (i know i can change the motherboard but it cost alot , I need Electric solve) . and it's not a software problem at all and n ot in the battry .
this is the best forms for PPC's so i don't have to post this in every site so better sign up and replay please maybe someone can help...
Click to expand...
Click to collapse
my friend I am sorry but there is no quick fix for something like this. To repair SMT type circuit boards you need a clean room environment and also some very expensive equipment. My advice is to get a new handset, there are a few people on here that need some parts for their phones and you can off set the cost of a new handset that way.
thanx for the advice , i'll replace it with one that works and with a warranty . this will be my last time buying cheap S***, i really like it and i hope they release android 2.0 soon for it.
hemo1001 said:
thanx for the advice , i'll replace it with one that works and with a warranty . this will be my last time buying cheap S***, i really like it and i hope they release android 2.0 soon for it.
Click to expand...
Click to collapse
As I said there are people who need parts, so it will not be a total loss!
where are you located? I need a few bits.
Tomorrow i'll sell it with around 150 dollar, i'll replace it with another X10 but with WARRANTY this time
just found this thread and it seems to describe my problem with my x10. If the crashing is heat related would using a cpu underclock help?
http://forum.xda-developers.com/showthread.php?t=831658 for more info
my phone doesnt charge the battery, but charging animation is playing, gave to service centre,they told motherboard replacement,but that told we dont do for the handsets without warranty.... pls help how can i sort this prob.
I don't agree with the first post, I had this problem too, and the problem was bad, but as soon I as I flashed with the latest firmware, that problem seems to have been fixed, gone by 2 days without any restarts.
i also have this problem.
The worse is now my charged battery will become red low batt at first and recharge itself back to normal without plug in power...i think i just solve the world energy problem here.
May have fixed the problem, for a bit.
I bought one of these used (x10a), I basically got ripped off by some guy that must have known about the issue. Anyway, I tore the phone apart down to the screen, I left that intact. I cleaned the housing, motherboard and sound jack with compressed air (lightly), cleaned contacts that looked a little dull. I noticed the foil covering the CPU and other components was a little askew and there were some heat bubbles forming. I used a mini spatula as a squeegee and got rid of the bubbles, cleaned up the edges around the foil to insure they didn't contact their neighbors and put the thing back together.
Before this I could use the phone for a call for longer than 2 minutes, the second I ended the call it would crash/reboot. Same with playing games and listening to music at the same time. Movies, forget it. I don't want to curse it because it has only been a day, but no crashes yet and I'm doing/running everything I can to try and get this thing to crash. If it was the bubbles contacting other metal in the chassis then they will probably return sometime in the future.
Who knows.
For now, I say it's fixed. I hope.
I downloaded the schematic and disassembly, reassembly instructions off the net.
UPDATE: Cleaning did not work, I really didn't think it would but it was worth a try. I did however rebake the main board in my convection oven for 10 minutes at 210 degrees Celsius and it worked. I have uploaded videos to youtube. If you're like me, no warranty and don't mind tearing things apart. Check out my videos on youtube, do a search for MrSpywhite.
I had the same problem and SE replaced the motherboard.
spywhite said:
UPDATE: Cleaning did not work, I really didn't think it would but it was worth a try. I did however rebake the main board in my convection oven for 10 minutes at 210 degrees Celsius and it worked. I have uploaded videos to youtube. If you're like me, no warranty and don't mind tearing things apart. Check out my videos on youtube, do a search for MrSpywhite.
Click to expand...
Click to collapse
That sounds like good news, I have a friend with a similar problem, but his phone has the same behaviour faster than yours... did really work? any problems after the bake? (mic, speaker) ?
Sorry for bumping in a old thread but I am also facing the same problem i guess. Anyone got it to work ?
The motherboard is costing me Rs.8000 ( 160$ approx ) and its a 2 yr old phone. Cant spend that much now on such an old phone.
This solution might help on that cases, as main reason for such things are Pb free soldering (small balls between CPU and MB).
http://forum.xda-developers.com/showpost.php?p=37819145&postcount=12
Of course you do it on your own risk...
Hi guys,
My phone seems to be hard bricked: black screen, nothing happens when trying to charge it, not possible to put it in DL mode, and even usb jig is not working.
Now I'm fully aware of the risks that go with a bad flash, but what is weird in my case is that it happened out of nowhere: I was on stock rom, phone was suffering from a bad case of slowdowns/random freezes/etc so I decided to put CM 11 on it. Like a phoenix my phone rose from his ashes, battery was holding for a full day instead of the usual 3 hours, no more freezes... but then after 2 days of working like a charm, I just found it plain dead on my desk.
Has it ever happened to anyone, suffering that kind of brick a few days after flashing but not during the actual procedure ? Does anyone has a potential solution other than replacing the MB ? (not really worth it on a 2 years old phone IMO, since there is little chance that I will stumble upon a free MB, and I'm not even sure that it would solve anything anyway)
Thanks for your help !
Nothing to do with the flash. Fact - electronics fails/dies. All the time. All electronics. Often without warning & for no apparent reason other than that's the nature of electronics. I don't know why people are so surprised when this type of thing happens.
Motherboard replacement or new phone - a motherboard replacement will fix the phone; one or more components on the motherboard have obviously died.
http://www.parts4repair.com/categories/Samsung-Repair-Parts/ seems to stock reconditioned motherboards for the S2......double figure prices rather than mid triple figure prices for a new phone.....you do the math.......
My wife says I'm a phone geek....She's probably right
Hi, I have a problem with a Honor 10.
Since August it started to restart randomly, I just replaced the battery and I just did two factory reset but the problem continues to manifest even in the configuration screen.
I would exclude the faulty power button, since before rebooting it usually froze on the activity I was performing.
Any ideas?
Thank you!
Test power button with ohm meter.
It was doing this after the reset with just it's factory load? No 3rd party apps loaded?
Try reflashing firmware.
Maybe be a mobo failure.
blackhawk said:
Test power button with ohm meter.
It was doing this after the reset with just it's factory load? No 3rd party apps loaded?
Try reflashing firmware.
Maybe be a mobo failure.
Click to expand...
Click to collapse
I really don't think is the power button because it reboot even in idle on the table, and i saw that if i put it on charge it reboot instantly.
I have this problem even in the configuration screens after the factory reset, indeed i've must configured two or three times because of that.
I'll try to reflash the firmware, then i'll wait for a new battery i ordered a month ago.
If it will be still broken i guess is a mobo failure.
I have a question: i didn't flashed a smartphone before, and i was asking myself if this reboot problem can mess up with flashing, bricking the phone. Can it be possible?
eddyxx said:
I really don't think is the power button because it reboot even in idle on the table, and i saw that if i put it on charge it reboot instantly.
I have this problem even in the configuration screens after the factory reset, indeed i've must configured two or three times because of that.
I'll try to reflash the firmware, then i'll wait for a new battery i ordered a month ago.
If it will be still broken i guess is a mobo failure.
I have a question: i didn't flashed a smartphone before, and i was asking myself if this reboot problem can mess up with flashing, bricking the phone. Can it be possible?
Click to expand...
Click to collapse
Yeah if it interrupts the flash that won't end well...
If you can return it, do so... otherwise...
Before you go flashing nuts try to determine if it's a hardware issue. Check ribbon cable connectors... and that switch.
Firmware shouldn't become corrupted unless there's a flash memory failure or it was a bad flash to begin with.
Does it not do this is safe mode? 3rd party app if so.
If it does it when in the boot menu it's likely hardware.
If so it may be just a failed battery. Try with charger connected to see if this alters the behavior.
If you don't feel comfortable repairing it, let a good tech do it for you. I always remember my first mechanical alarm clock disassembly... it didn't go well
blackhawk said:
If you can return it, do so... otherwise...
Before you go flashing nuts try to determine if it's a hardware issue. Check ribbon cable connectors... and that switch.
Firmware shouldn't become corrupted unless there's a flash memory failure or it was a bad flash to begin with.
Does it not do this is safe mode? 3rd party app if so.
If it does it when in the boot menu it's likely hardware.
If so it may be just a failed battery. Try with charger connected to see if this alters the behavior.
If you don't feel comfortable repairing it, let a good tech do it for you. I always remember my first mechanical alarm clock disassembly... it didn't go well
Click to expand...
Click to collapse
It reboots even in safe mode!
It would seem a hardware problem, possible that I bought a new battery already damaged?
It’s been a few hours since it works good after charging it to 100%, it seems that it starts to reboot towards 50%.
I wanted to flash it also because before doing the factory reset, it automatically installed some "stock" apps by itself, I refer to some games that Honor automatically installs at each factory reset, every time I uninstalled them, after some restart they reinstalled themselves.
It was a weird issue but looks like fixed with the factory reset, so now i only have the reboot issue.
I am so desperate that I would like to try the battery of my Honor 10 (the one with problems is that of my girlfriend), I would not buy another battery since I have to be delivered the one I ordered from a month.
It may be the battery, they can fail at any time.
It's rare for new ones to fail but it happens.
Use a firewall to block auto updates or installs.
Karma Firewall works well but its valuable logging feature doesn't work on Android 10 and higher, but it still will block apps.
Update: I just bought another battery and the problem persist.
Now im sure is not the battery so i will flash it very soon no matter what.
I have been having the same problem as you guys have since last Christmas (2020), when my phone was 18 months old.
I switched phone and gave the Honor 10 to my wife for Coin Master and the problem persisted.
However, two months ago the battery started to swell and surprisingly the problem went away completely for about a month. But as it swelled to the extent of pushing out the screen the problem returned a month ago.
Thinking it was possibly a battery/battery connection related issue, I changed to a new Pisen battery last night. Sadly, the rebooting continued but only for 2-3 times today.
So it is probably an issue with the board itself.
citibatter said:
I have been having the same problem as you guys have since last Christmas (2020), when my phone was 18 months old.
I switched phone and gave the Honor 10 to my wife for Coin Master and the problem persisted.
However, two months ago the battery started to swell and surprisingly the problem went away completely for about a month. But as it swelled to the extent of pushing out the screen the problem returned a month ago.
Thinking it was possibly a battery/battery connection related issue, I changed to a new Pisen battery last night. Sadly, the rebooting continued but only for 2-3 times today.
So it is probably an issue with the board itself.
Click to expand...
Click to collapse
The battery failure may have damaged the mobo or perhaps it was preexisting.
Check ribbon connector pins for damage. Look around for visible solder cracks. Try pressing gently on the mobo with a pencil eraser with device powered on to try to find the area. Check ribbon cables too by gently moving them.
One of the most likely places for a failed solder joint are the BGA chipsets. The many solder pads are under the chipset, inaccessible.
Press gently on them to try and verify this. A hot air station (and skillset to use it) is the only way to repair this type of failure.
Any battery swelling is a failure, replace it asap.
blackhawk said:
The battery failure may have damaged the mobo or perhaps it was preexisting.
Check ribbon connector pins for damage. Look around for visible solder cracks. Try pressing gently on the mobo with a pencil eraser with device powered on to try to find the area. Check ribbon cables too by gently moving them.
One of the most likely places for a failed solder joint are the BGA chipsets. The many solder pads are under the chipset, inaccessible.
Press gently on them to try and verify this. A hot air station (and skillset to use it) is the only way to repair this type of failure.
Any battery swelling is a failure, replace it asap.
Click to expand...
Click to collapse
As I said, battery has been replaced with a brand new one. Therefore the swelling issue is fixed.
Don't have the skill set to use a hot air gun or to solder so this is it for me.
Quite disappointed by the QC of Huawei as this was my first Huawei phone. I have been using Xiaomi since my first smartphone and never had an issue like this before.
citibatter said:
As I said, battery has been replaced with a brand new one. Therefore the swelling issue is fixed.
Don't have the skill set to use a hot air gun or to solder so this is it for me.
Quite disappointed by the QC of Huawei as this was my first Huawei phone. I have been using Xiaomi since my first smartphone and never had an issue like this before.
Click to expand...
Click to collapse
My point was a mobo failure is generally a game over event.
I run strictly Samsung's as I like their UI and have become familiar with them. Of course in 2-3 years that could change if Samsung keeps dropping the ball.
blackhawk said:
My point was a mobo failure is generally a game over event.
I run strictly Samsung's as I like their UI and have become familiar with them. Of course in 2-3 years that could change if Samsung keeps dropping the ball.
Click to expand...
Click to collapse
I understand.
That said, Huawei did replace the MBs for out of warranty customers in mainland China as a good will gesture.
Too bad that policy did not extend outside of China.
citibatter said:
I understand.
That said, Huawei did replace the MBs for out of warranty customers in mainland China as a good will gesture.
Too bad that policy did not extend outside of China.
Click to expand...
Click to collapse
Maybe see if they'll discount a mobo for you.
Not free but it might sweeten the deal.
Or write it off and move on.
All my Samsung's have been long lived with replacement batteries being the only repairs.
Another reason I like them.
In my case it was sort of dumb luck especially when choosing the first Note 10+. In this case they did live up to their hype.
The S4+ lasted over 5 years and still boots up.
I had the random reboots going on for weeks even at night, also bootloops sometimes .
I tried a lot of stuff but i got my phone going again for 2 weeks now without any reboots.
It might be just pure luck but this is what i did last time:
Did a complete reset of the Phone ( everything gone )
I changed simcard to other simslot (i think this made the difference, atleast for my phone)
No apps from Meta (You dont want any of their **** anyway )
ill keep you posted
exoronic said:
I had the random reboots going on for weeks even at night, also bootloops sometimes .
I tried a lot of stuff but i got my phone going again for 2 weeks now without any reboots.
It might be just pure luck but this is what i did last time:
Did a complete reset of the Phone ( everything gone )
I changed simcard to other simslot (i think this made the difference, atleast for my phone)
Put on performance mode (might not be it, but details mather here, today is first day without performance mode, no issues so far)
No apps from Meta (again because details mather, might not be it, i had random reboots all the time, but when i was using instagram or it was still running in the background , it was real bad, You dont want any of their **** anyway )
ill keep you posted
Click to expand...
Click to collapse
Yay!
Meta is malware.
Hey guys, it seems that I solved the problem by bringing the phone to a Huawei service center, they performed an "operation on the motherboard".
Actually they changed the battery with an "original" one for 60€ (the one I had replaced cost 10€ ), then when the problem obviously came back they did the repair on the mobo at no extra cost.
I guess it went well.
eddyxx said:
Hey guys, it seems that I solved the problem by bringing the phone to a Huawei service center, they performed an "operation on the motherboard".
Actually they changed the battery with an "original" one for 60€ (the one I had replaced cost 10€ ), then when the problem obviously came back they did the repair on the mobo at no extra cost.
I guess it went well.
Click to expand...
Click to collapse
Did you had any reboots after the motherboard change?
I got the same issue with my Honor 10. Tried every trick that I could think of, but nothing seems to help.
What I noticed, that sometimes when it restarts it does get very hot in the area near the camera. (not sure exactly what component it's there but it's something on the motherboard)
I'm thinking if it worth doing this motherboard change. (as it seems to be a design/component issue if there are so many that have this problem)
nomob said:
Did you had any reboots after the motherboard change?
I got the same issue with my Honor 10. Tried every trick that I could think of, but nothing seems to help.
What I noticed, that sometimes when it restarts it does get very hot in the area near the camera. (not sure exactly what component it's there but it's something on the motherboard)
I'm thinking if it worth doing this motherboard change. (as it seems to be a design/component issue if there are so many that have this problem)
Click to expand...
Click to collapse
No, no reboot at all, but I noticed later that they rolled back to Android 8.0, so I’m thinking that they didn’t fix the motherboard, but they actually found a workaround by downgrading the OS.
I’m afraid to try to upgrade to Android 10.0 for this reason, I don’t even know if I can do it considering the new Huawei policy of flashing and stuff, but my girlfriend is ok with that so I let it go.
I can confirm that even now, on each task (TikTok scrolling for example), it gets very very hot in that point near the camera, my perfectly still working Honor 10 instead does it only on intensive use of the camera.
I hope this information can help you with your Honor 10, I suggest you go back to an older version of Android if possible just for troubleshooting.
If it persists, the motherboard is probably faulty and you need to replace it, I guess...
eddyxx said:
No, no reboot at all, but I noticed later that they rolled back to Android 8.0, so I’m thinking that they didn’t fix the motherboard, but they actually found a workaround by downgrading the OS.
I’m afraid to try to upgrade to Android 10.0 for this reason, I don’t even know if I can do it considering the new Huawei policy of flashing and stuff, but my girlfriend is ok with that so I let it go.
I can confirm that even now, on each task (TikTok scrolling for example), it gets very very hot in that point near the camera, my perfectly still working Honor 10 instead does it only on intensive use of the camera.
I hope this information can help you with your Honor 10, I suggest you go back to an older version of Android if possible just for troubleshooting.
If it persists, the motherboard is probably faulty and you need to replace it, I guess...
Click to expand...
Click to collapse
Thanks for the reply and downgrade suggestion! (worth a try)