02 XDA (T-mobile pocket PC) started Wallaby and am stuck in xda-developers edition. Would like to get back to 2003 version of PPC software. Any solutions? Not a techno-dweeb, will sync to pc but will not restore data (not compatable error). I have 10 of these and this is the only one doing this....
Any help would be appreciated.
Thanks,
SH
I bought the m600 two weeks ago and read about the unlocking in the Wiki. I folowed the steps but it seems that after executing lokiwizMSL.bat and pressing enter to start it lokiwiz can't find my mobile phone, it says: cant find path. While it was connected with activesync. after this it says its unlocked, but i cant find the code anywhere
Does anybody knows what I could have done wrong?
I really need to Sim unlock the phone because it can't read my other non-orange Simcard
thanks in advance!
hi again.
I tried to unlock the Prophet again, for some times. I Copied the cab's from the Utils folder in the Lokiwiz03a.zip file to my Prophet and executed them.
(The two files : "Cert_SPCS.cab" and "EnableRapi.cab")
But I keep receiving the message ".....kan opgegeven pad niet vinden" (cant find path)
Please help me
What is the path that the Lokmiwiz is searching for, and why doesnt it sees that I'm connected via ActiveSync, which I was?
thanks in advance!
That's the problem about G4 devices! It seems that HTC has changed the path for unlocking so we have to wait for a new unlocking solution for our G4 devices!
I have to wait too!
try with aWizard
Unlocking my SPV M600 from Orange
Hi. I'm from Argentina and travel a lot because I guide motorcycle tours in South America. I use different cell phones all over south america.
I mainly use my SP in Argentina (CTI Movil)
My girlfriend bought me (yes you can say I'm a lucky guy ) this beautiful M600 in France with Mobicart. I tried to unlocked it usind the lokiwizMSL 0.3 but did not work. The message was that the path was not found.
I installed the cabs in the PDA and this erased the picture in the desktop.
After that I ran again de lokiwiz, and had the same answer. The path is not found and did not deliver the precious code. The PDA was connected at all times. It also says that ECHO is disconnected. I have no idea what ECHO is (sorry )
Do we still have to wait for a new version of the loki software? Is there any other way? Can you help this southern beginner?????
I can say that my SPV is a G4, bought last Dec.
Hey, this is a great place and I kinda like the community.
Saludos!!
SPV M600-G4 Desimlock Ok
Hi guys,
I've just unlocked my M600 ORANGE.
I used lokiwizMSL 0.3 on my desktop PC (ACTIVESYNC V 4.5)... That does not worked... I used lokiwizMSL 0.3 in my notebook (ACTIVESYNC V4.2) and It woked very well : I've got the precious number !
Know I put my SFR sim into it... That's OK
So... If your PC says "path is not found" try to unlock your M600 into an other PC !!!
animelover said:
That's the problem about G4 devices! It seems that HTC has changed the path for unlocking so we have to wait for a new unlocking solution for our G4 devices!
I have to wait too!
Click to expand...
Click to collapse
G4 = "Disk On Chip" is a other Version.
G4 unlock with Lokiwiz: Activesync 4.2
I have Prophet G4 and unlocked with the Lokiwiz software (I don't know which version anymore, I unlocked ± 1 year ago).
I used Activesync 4.2, definitely not 4.5
Good chance that M$ added (bij accident of course) a minor surprise in their latest Activesync version.
4.2 can be downloaded on several places, f.i. here
http://www.techspot.com/downloads/2480-microsoft-activesync.html
Good luck.
I've just used Lokiwiz03a to unlock an m600 g4 with no problem whatsover over activesync 4.5
Unlock S200. All Ok !!!!!
Hello
If somebody need to unlock a Qtek S200 G4 use the next link:
http://wiki.xda-developers.com/index.php?pagename=Prophet_Unlock_Sim
It's easy and ok!!!
Tanks to wrigth this guide !!!
do you CID unlock or SIM :->
can sombody post me a link please how to CID unlock a G4 Model?cause wizloki is just for sim or?thx
More problems with my SPV M600
Someone has given me a PDA (SPV M600 or Qtek S200) but he tried to upgrade it to wm6. Unfortunately he doesn't know everything about it because this PDA is 4G and he tried the sequence as the PDA was 3G.
The thing is, in the middle of the process the machine starts to run but it is blocked and the screen shows:
Orange:
IPL 2.21.0001
SPL 2.21.0001
GSM 0.2.19.21
OS 1.0.13.21
After do a hard reset the message is always the same. I can't do anything!!
What could I do?
Thanks
lokiwiz03a worked for me Now I can use any SIM...
If anyone is interested, I used activesync 4.1, the disk came with my SPV.
Hy guys,
I have a post Dec.2 x01HT and have the following problem. I have bought the imei-check unlocker when it came out and used it. Originally it worked, I tried it with a DOCOMO SIM and everything was nice, but when I tried a GSM SIM it still said simlock....
I e-mailed imei-check and they said I have to do the unlock during a hard reset before the softbank settings screen and that is what I did. After that my device worked with a GSM Sim, but I had a ton of problems: the windows hangs every few hours and I have to reset the set, also I cannot get the hold-down vibrate function of the radio button to work, the reaction time of the touch screen is very slow etc.
I also noticed that if I hard-reset without using the imei-check unlocker after the settings procedures there is an auto customization procedure that runs and customizes the phone to the softbank settings and looks, but if I do the hard reset and unlock with imei-chek this procedure doesn't run and I suspect that is part of the reasons for all the problems.
I was wondering if anyone has experienced similar problem and can help me solve this problem?
I was also wondering if I run the free unlocker on my device will it work better?
P.S. I am using the original Softbank ROM with the English MUI by Asukal.
kalintri said:
Hy guys,
I have a post Dec.2 x01HT and have the following problem. I have bought the imei-check unlocker when it came out and used it. Originally it worked, I tried it with a DOCOMO SIM and everything was nice, but when I tried a GSM SIM it still said simlock....
I e-mailed imei-check and they said I have to do the unlock during a hard reset before the softbank settings screen and that is what I did. After that my device worked with a GSM Sim, but I had a ton of problems: the windows hangs every few hours and I have to reset the set, also I cannot get the hold-down vibrate function of the radio button to work, the reaction time of the touch screen is very slow etc.
I also noticed that if I hard-reset without using the imei-check unlocker after the settings procedures there is an auto customization procedure that runs and customizes the phone to the softbank settings and looks, but if I do the hard reset and unlock with imei-chek this procedure doesn't run and I suspect that is part of the reasons for all the problems.
I was wondering if anyone has experienced similar problem and can help me solve this problem?
I was also wondering if I run the free unlocker on my device will it work better?
P.S. I am using the original Softbank ROM with the English MUI by Asukal.
Click to expand...
Click to collapse
You can still do the customization manually. There is only one file that you aren't supposed to run. Just unlock your EXT-ROM and install the cabs one by one. Pof has a Softbank extended rom with the bad file removed around here somewhere. In any case the "fix" cabs are all over the place and you probably don't even need to run the softbank stuff if you don't want to.
Thanks,
I am not too much into these things. Originally all I wanted was to SIM unlock my set, but I will try to find how to do all the things you said...to unlock the EXt-ROM and install the cabs myself.
Can anyone tell which cab exactly I should NOT install?
I have downloaded the Softbank Extended ROM from here, but it seems to have even more cabs than in my original ExtRom on the device. I would appreciate a list of which cabs to install or not to install.
Thank You all
So how does this IMEI unlock could work?
Hi all, I've not had my HD2 very long (bought 2nd hand) and would like to know how to tell what version of HSPL is installed if it's installed at all? Any easy way to check?
Many thanks,
Get in bootloader.
Thanks will see what it says
Hi All, is there currently any method to enable USB tethering on a HTC Titan II? I am unable to deploy USBModeSwitch by Ansar to the phone as it is only dev locked and throws an error while sending to the phone.
Any help would be appreciated.